Since SAGV is controlled via unidirectional pcode commands
we have no way to query the current state. So instead let's
expose the last programmed state via debugfs. This way we
can at least know whether SAGV should be enabled or not
(which can be important to know when dealing with underruns/etc.).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On icl+ SAGV is controlled by masking of the QGV points.
Reduce the QGV point mask to the same kind of enabled vs.
disable information that we had on previous platforms.
Will be useful in answering the question whether SAGV is
actually enabled or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Introuce a HAS_SAGV() macro to answer the question whether
the platform in general supports SAGV. intel_has_sagv() will
keep on giving us the more specific answer whether the current
device supports SAGV or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes: a301cb0fca ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
If reset requirement was relaxed via module parameter, errors caused by
missing reset should not be propagated down to the vfio core.
Otherwise initialization will fail.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Fixes: 5f6c7e0831 ("vfio/platform: Use the new device life cycle helpers")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20230131083349.2027189-1-tduszynski@marvell.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the lock_class_key structure out of struct bus_type and into the
dynamic structure we create already for all bus_types registered with
the kernel. This saves on static space and removes one more writable
field in struct bus_type.
In the future, the same field can be moved out of the struct class logic
because it shares this same private structure.
Most everyone will never notice this change, as lockdep is not enabled
in real systems so no memory or logic changes are happening for them.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230201083349.4038660-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Pirko says:
====================
devlink: trivial names cleanup
This is a follow-up to Jakub's devlink code split and dump iteration
helper patchset. No functional changes, just couple of renames to makes
things consistent and perhaps easier to follow.
====================
Link: https://lore.kernel.org/r/20230131090613.2131740-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to maintain naming consistency, rename and reorder all usages
of struct struct devlink_cmd in the following way:
1) Remove "gen" and replace it with "cmd" to match the struct name
2) Order devl_cmds[] and the header file to match the order
of enum devlink_command
3) Move devl_cmd_rate_get among the peers
4) Remove "inst" for DEVLINK_CMD_GET
5) Add "_get" suffix to all to match DEVLINK_CMD_*_GET (only rate had it
done correctly)
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to have "gen" inside name of the structure for devlink commands.
Remove it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To have the name of the function consistent with the struct cb name,
rename devlink_nl_instance_iter_dump() to
devlink_nl_instance_iter_dumpit().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Just small bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmPTs30PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpjzIIAMxHPX4KamjTQ0C9A4uPoWbdLAJfft6GpjK0
To2aZSwv48Evjk9eilZIU7QOmU5vAYiyvK27MMUZQ74W/1maZUWGF3Hu3g2TwBNj
qcxNKIZu9eurrEvYSgIAbH2R4al3WhdQjF+h/ZUmYO2RM//X64a2LM6n2p6aFZjs
yBnR3LOiKC7TIkO7YEVyiIQT3ayulu3viLeL0d2HsQJKDQ60YZX1NDBOXgY0UsIq
gG50l3Nr3RA7CgeJyWOB1x9/8DouXbg9uaHu6WR1+qTwFSW++Z07iz3V/ZYzPmNX
1GaeJUNhOIR5F4DvhND3Me1WcuaE28j6Flu8SECYNgnV8WG4lSg=
=EjKi
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Just small bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: ifcvf: Do proper cleanup if IFCVF init fails
vhost-scsi: unbreak any layout for response
tools/virtio: fix the vringh test for virtio ring changes
vhost/net: Clear the pending messages when the backend is removed
A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific,
so those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which
is applied only to Xen PV. The other major parts are ASoC Intel
SOF and AVS fixes that are scattered as various small code
changes. The rest are device-specific fixes and quirks for HD-
and USB-audio, FireWire and ASoC AMD / HDMI.
-----BEGIN PGP SIGNATURE-----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=/+Up
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific, so
those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which is
applied only to Xen PV. The other major parts are ASoC Intel SOF and
AVS fixes that are scattered as various small code changes. The rest
are device-specific fixes and quirks for HD- and USB-audio, FireWire
and ASoC AMD / HDMI"
* tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: firewire-motu: fix unreleased lock warning in hwdep device
ALSA: memalloc: Workaround for Xen PV
ASoC: cs42l56: fix DT probe
ASoC: codecs: wsa883x: correct playback min/max rates
ALSA: hda/realtek: Add Acer Predator PH315-54
ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022 into DMI table
ALSA: hda: Do not unset preset when cleaning up codec
ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure
ASoC: hdmi-codec: zero clear HDMI pdata
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
ASoC: Intel: sof_ssp_amp: always set dpcm_capture for amplifiers
ASoC: Intel: sof_nau8825: always set dpcm_capture for amplifiers
ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers
ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless
ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform
ASoC: SOF: keep prepare/unprepare widgets in sink path
ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL
ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0
...
After cc27b735ad ("PCI/portdrv: Turn off PCIe services during shutdown")
we observe hangs during poweroff/reboot on systems with LS7A chipset.
This happens because the portdrv .shutdown() method (pcie_portdrv_remove())
clears PCI_COMMAND_MASTER via pci_disable_device(), which prevents bridges
from forwarding memory or I/O Requests in the upstream direction (PCIe
r6.0, sec 7.5.1.1.3).
LS7A Root Ports have a hardware defect: clearing PCI_COMMAND_MASTER *also*
prevents the bridge from forwarding CPU MMIO requests in the downstream
direction, and these MMIO accesses to devices below the bridge happen even
after .shutdown(), e.g., to print console messages. LS7A neither forwards
the requests nor sends an unsuccessful completion to the CPU, so the CPU
waits forever, resulting in the hang.
The purpose of .shutdown() is to disable interrupts and DMA from the
device. PCIe ports may generate interrupts (either MSI/MSI-X or INTx) for
AER, DPC, PME, hotplug, etc., but they never perform DMA except MSI/MSI-X.
Clearing PCI_COMMAND_MASTER effectively disables MSI/MSI-X, but not INTx.
The port service driver .remove() methods clear the interrupt enables in
PCI_ERR_ROOT_COMMAND, PCI_EXP_DPC_CTL, PCI_EXP_SLTCTL, and PCI_EXP_RTCTL,
etc., which disables interrupts regardless of whether they are MSI/MSI-X or
INTx.
Add a pcie_portdrv_shutdown() method that calls all the port service driver
.remove() methods to clear the interrupt enables for each service but does
not clear Bus Mastering on the port itself.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230201043018.778499-2-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we parse the ZT signal context we read the entire context from
userspace, including the generic signal context header which was already
read by parse_user_sigframe() and padding bytes that we ignore. Avoid the
possibility of relying on the second read of the data read twice by only
reading the data which we are actually going to use.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-7-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we parse the ZA signal context we read the entire context from
userspace, including the generic signal context header which was already
read by parse_user_sigframe() and padding bytes that we ignore. Avoid the
possibility of relying on the second read of the data read twice by only
reading the data which we are actually going to use.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-6-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we parse the SVE signal context we read the entire context from
userspace, including the generic signal context header which was already
read by parse_user_sigframe() and padding bytes that we ignore. Avoid the
possibility of relying on the second read of the data read twice by only
reading the data which we are actually going to use.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-5-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We need to read the sizes of the signal context frames as part of parsing
the overall signal context in parse_user_sigframe(). In the cases where we
defer frame specific parsing to other functions those functions (other
than the recently added TPIDR2 parser) reread the size and validate the
version they read, opening the possibility that the value may change.
Avoid this possibility by passing the size read in parse_user_sigframe()
through user_ctxs and referring to that.
For consistency we move the size check for the TPIDR2 context into the
TPIDR2 parsing function.
Note that for SVE, ZA and ZT contexts we still read the size again but
after this change we no longer use the value, further changes will avoid
the read.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-4-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of taking a pointer to struct user_ctxs like the other two
restore_blah_context() functions the FPSIMD function takes a pointer to the
user struct it should read. Change it to be consistent with the rest, both
for consistency and to prepare for changes which avoid rereading data that
has already been read by the core parsing code.
There should be no functional change from this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-3-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is some minimal size validation in parse_user_sigframe() however
all of the individual parsing functions perform frame specific validation
of the sizing information, remove the frame specific size checks in the
core so that there isn't any confusion about what we validate for size.
Since the checks in the SVE and ZA parsing are after we have read the
relevant context and since they won't report an error if the frame is
undersized they are adjusted to check for this before doing anything else.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-2-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We validate that the magic in the struct fpsimd_context is correct in
restore_fpsimd_context() but this is redundant since parse_user_sigframe()
uses this magic to decide to call the function in the first place. Remove
the extra validation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221212-arm64-signal-cleanup-v3-1-4545c94b20ff@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At present the hwcaps are hard to read and a bit error prone since the
macros used to specify matches require us to write out the register name
multiple times and explicitly specify the width of the field, hopefully
using the correct constant. Now that all the ID registers are generated we
can improve this somewhat by redoing the macros so that we specify the
register, field and minimum value symbolically and use token pasting to
initialise the capability struct with the appropriate values.
We move from specifying like this:
HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_BT_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_BT_IMP, CAP_HWCAP, KERNEL_HWCAP_BTI),
to this:
HWCAP_CAP(ID_AA64PFR1_EL1, BT, IMP, CAP_HWCAP, KERNEL_HWCAP_BTI),
which is shorter due to having less duplicate information and makes it
much harder to make an error like specifying the wrong field width or
an invalid enumeration value since everything must be a constant defined
for the sysreg and names are only typed once.
There should be no functional effect from this change, a check of the
generated .rodata showed no differences.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v4-5-25b6b3fb9d18@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Our table of hwcaps sometimes uses the defined constant to specify the
enumeration value they are attempting to match but in some cases an
unadorned number is used. In preparation for using helper macros to to
specify the hwcaps less verbosely replace the magic numbers with their
constants, this will hopefully make the conversion to helper macros
easier to review.
There should be no functional effect from this change, a check of the
generate .rodata showed no differences.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v4-4-25b6b3fb9d18@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow the simplification of way we declare hwcaps annotate
most of the unsigned fields in the identification registers as such. This
is not a complete annotation, it does cover all the cases where we already
annotate signedness of the field in the hwcaps and some others which I
happened to look at and seemed clear but there will be more and nothing
outside the identification registers was even looked at.
Other fields can be annotated as incrementally as people have the time and
need to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v4-3-25b6b3fb9d18@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently annotate a few bitfields as signed in hwcaps, update all of
these to be SignedEnum in the sysreg generation. Further signed bitfields
can be done incrementally, this is the minimum required for the conversion
of the hwcaps to use token pasting to simplify their declaration.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v4-2-25b6b3fb9d18@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Many of our enumerations follow a standard scheme where the values can be
treated as signed however there are some where the value must be treated
as signed and others that are simple enumerations where there is no clear
ordering to the values. Provide new field types SignedEnum and
UnsignedEnum which allows the signedness to be specified in the sysreg
definition and emit a REG_FIELD_SIGNED define for these which is a
boolean corresponding to our current FTR_UNSIGNED and FTR_SIGNED macros.
Existing Enums will need to be converted, since these do not have a
define generated anyone wishing to use the sign of one of these will
need to explicitly annotate that field so nothing should start going
wrong by default.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221207-arm64-sysreg-helpers-v4-1-25b6b3fb9d18@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Just replace magic numbers by MD_RESYNC_* enumerations.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Rename phy-rockchip-inno-usb2.yaml to a more common format of
rockchip,inno-usb2phy.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/99794484-d67e-ee1f-4e76-200de20a879c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Entries are first grouped as per SoC present on the board. Groups are
sorted alphabetically. This makes it easy to know SoC to board mapping
and also add new entries in alphabetical order.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230126071159.2337584-1-vigneshr@ti.com
AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP
AM69 SK supports the following interfaces:
* 32 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x3 USB 3.0 Type-A ports
* x1 USB 3.0 Type-C port
* x1 UHS-1 capable micro-SD card slot
* x4 MCAN instances
* 32 GB eMMC Flash
* 512 Mbit OSPI flash
* x2 Display connectors
* x1 PCIe M.2 M Key
* x1 PCIe M.2 E Key
* x1 4L PCIe Card Slot
* x3 CSI2 Camera interface
* 40-pin Raspberry Pi header
Add initial support for the AM69 SK board.
Design Files: https://www.ti.com/lit/zip/SPRR466
TRM: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-3-sabiya.d@ti.com
AM69 Starter Kit is a single board designed for TI AM69 SoC.
The AM69 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications.
Add DT binding for AM69 Starter Kit.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-2-sabiya.d@ti.com
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL in the newly
added ssve_za_regs test.
Fixes: bc69da5ff0 ("kselftest/arm64: Verify simultaneous SSVE and ZA context generation")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-2-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-1-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During early development a dependedncy was added on having FA64
available so we could use the full FPSIMD register set in the signal
handler. Subsequently the ABI was finialised so the handler is run with
streaming mode disabled meaning this is redundant but the dependency was
never removed, do so now.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselfetest-ssve-fa64-v1-1-f418efcc2b60@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reduce the size of struct symbol on x86_64 from 208 to 200 bytes.
This structure is allocated a lot and never freed.
This reduces maximum memory usage while processing vmlinux.o from
2919716 KB to 2917988 KB (-0.5%) on my notebooks "localmodconfig".
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221216-objtool-memory-v2-6-17968f85a464@weissschuh.net
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
By using calloc() instead of malloc() in a loop, libc does not have to
keep around bookkeeping information for each single structure.
This reduces maximum memory usage while processing vmlinux.o from
3153325 KB to 3035668 KB (-3.7%) on my notebooks "localmodconfig".
Note this introduces memory leaks, because some additional structs get
added to the lists later after reading the symbols and sections from the
original object. Luckily we don't really care about memory leaks in
objtool.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221216-objtool-memory-v2-3-17968f85a464@weissschuh.net
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
HOSTCC is always wanted when building objtool. Setting CC to HOSTCC
happens after tools/scripts/Makefile.include is included, meaning
flags (like CFLAGS) are set assuming say CC is gcc, but then it can be
later set to HOSTCC which may be clang. tools/scripts/Makefile.include
is needed for host set up and common macros in objtool's
Makefile. Rather than override the CC variable to HOSTCC, just pass CC
as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and
also to the linkage step.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230126190606.40739-4-irogers@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Merge series from Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>:
In preparation for supporting devices with multiple chip selects add an
interface for accessing the chip selects via a function.
The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e2 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm raid calls md_stop to stop the raid device. It needs to
free the writes_pending here.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.
After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
This helper function will be used in next patch. It's easy for
understanding.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
