There are cases, where devices have an HDMI1.4 retimer, and TMDS clock rate
is capped to 340MHz via VBT. In such cases scrambling might be supported
by the platform and an HDMI2.0 sink for lower TMDS rates, but not
supported by the retimer, causing blankouts.
So avoid enabling scrambling, if the TMDS clock is capped to <= 340MHz.
v2: Added comment, documenting the rationale to check for TMDS clock,
before going for scrambling. (Arun)
v3: Fixed the function name to check if source supports scrambling. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221222040851.3029514-1-ankit.k.nautiyal@intel.com
Stefan Schmidt says:
====================
ieee802154 for net 2023-01-30
Only one fix this time around.
Miquel Raynal fixed a potential double free spotted by Dan Carpenter.
* tag 'ieee802154-for-net-2023-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
mac802154: Fix possible double free upon parsing error
====================
Link: https://lore.kernel.org/r/20230130095646.301448-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Foster says:
====================
add support for the the vsc7512 internal copper phys
This patch series is a continuation to add support for the VSC7512:
https://patchwork.kernel.org/project/netdevbpf/list/?series=674168&state=*
That series added the framework and initial functionality for the
VSC7512 chip. Several of these patches grew during the initial
development of the framework, which is why v1 will include changelogs.
It was during v9 of that original MFD patch set that these were dropped.
With that out of the way, the VSC7512 is mainly a subset of the VSC7514
chip. The 7512 lacks an internal MIPS processor, but otherwise many of
the register definitions are identical. That is why several of these
patches are simply to expose common resources from
drivers/net/ethernet/mscc/*.
This patch only adds support for the first four ports (swp0-swp3). The
remaining ports require more significant changes to the felix driver,
and will be handled in the future.
====================
Link: https://lore.kernel.org/r/20230127193559.1001051-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Utilize the existing ocelot MFD interface to add switch functionality to
the Microsemi VSC7512 chip.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add control of an external VSC7512 chip.
Currently the four copper phy ports are fully functional. Communication to
external phys is also functional, but the SGMII / QSGMII interfaces are
currently non-functional.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main purpose of the Ocelot chips are the Ethernet switching
functionalities. Document the support for these features.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC7511, VSC7512, VSC7513 and VSC7514 all have the ability to be
controlled either internally by a memory-mapped CPU, or externally via
interfaces like SPI and PCIe. The internal CPU of the VSC7511 and 7512
don't have the resources to run Linux, so must be controlled via these
external interfaces in a DSA configuration.
Add mscc,vsc7512-switch compatible string to indicate that the chips are
being controlled externally in a DSA configuration.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The *_RES_SIZE macros are initally <= 0x100. Future resource sizes will be
upwards of 0x200000 in size.
To keep things clean, fully align the RES_SIZE macros to 32-bit to do
nothing more than make the code more consistent.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the Felix driver would probe the ports and verify functionality, it
would fail if it hit single port mode that wasn't supported by the driver.
The initial case for the VSC7512 driver will have physical ports that
exist, but aren't supported by the driver implementation. Add the
OCELOT_PORT_MODE_NONE macro to handle this scenario, and allow the Felix
driver to continue with all the ports that are currently functional.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The architecture around the VSC7512 differs from existing felix drivers. In
order to add support for all the chip's features (pinctrl, MDIO, gpio) the
device had to be laid out as a multi-function device (MFD).
One difference between an MFD and a standard platform device is that the
regmaps are allocated to the parent device before the child devices are
probed. As such, there is no need for felix to initialize new regmaps in
these configurations, they can simply be requested from the parent device.
Add support for MFD configurations by performing this request from the
parent device.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The define FELIX_MAC_QUIRKS was used directly in the felix.c shared driver.
Other devices (VSC7512 for example) don't require the same quirks, so they
need to be configured on a per-device basis.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC7514 target regmap is identical for ones shared with similar
hardware, specifically the VSC7512. Share this resource, and change the
name to match the pattern of other exported resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resetting the switch core is the same whether it is done internally or
externally. Move this routine to the ocelot library so it can be used by
other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vcap_props structure is common to other devices, specifically the
VSC7512 chip that can only be controlled externally. Export this structure
so it doesn't need to be recreated.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ocelot_regfields struct is common between several different chips, some
of which can only be controlled externally. Export this structure so it
doesn't have to be duplicated in these other drivers.
Rename the structure as well, to follow the conventions of other shared
resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose ocelot_wm functions so they can be shared with other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_is_tx_ready() checks that list_first_entry() does not return NULL.
This condition can never happen. For empty lists, list_first_entry()
returns the list_entry() of the head, which is a type confusion.
Use list_first_entry_or_null() which returns NULL in case of empty
lists.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-tls-v1-1-525bbfe6f0d0@diag.uniroma1.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SuperH does not include uaccess.h, even tho it calls access_ok().
Fixes: 68f4eae781 ("net: checksum: drop the linux/uaccess.h include")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230128073108.1603095-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function __b44_cam_read() is defined in the b44.c file, but not called
elsewhere, so remove this unused function.
drivers/net/ethernet/broadcom/b44.c:199:20: warning: unused function '__b44_cam_read'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3858
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230128090413.79824-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-27 (ice)
This series contains updates to ice driver only.
Dave prevents modifying channels when RDMA is active as this will break
RDMA traffic.
Michal fixes a broken URL.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix broken link in ice NAPI doc
ice: Prevent set_channel from changing queues while RDMA active
====================
Link: https://lore.kernel.org/r/20230127225333.1534783-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some instances (particularly with CPRh) we might want to specifiy
more than one qcom,opp-fuse-level, as the same OPP subnodes may be
used by different "CPR threads". We need to make sure that
n = num_threads entries is legal and so far nobody seems to use more
than two, so let's allow that.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
As the fast DEK update is fully implemented, use it for kTLS to get
better performance.
TIS pool was already supported to recycle the TISes. With this series
and TIS pool, TLS CPS is improved by 9x higher, from 11k/s to 101k/s.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
One bulk with full available keys is left undestroyed, to service the
possible requests from users quickly.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After invalidation, the idle bulk with all DEKs available for use, is
destroyed, to free keys and mem.
To get better performance, the firmware destruction operation is done
asynchronously. So idle bulks are enqueued in destroy_list first, then
destroyed in system workqueue. This will improve performance, as the
destruction doesn't need to hold pool's mutex.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To fast update encryption keys, those freed keys with need_sync bit 1
and in_use bit 0 in a bulk, can be recycled. The keys are cached
internally by the NIC, so invalidating internal NIC caches by
SYNC_CRYPTO command is required before reusing them. A threshold in
driver is added to avoid invalidating for every update. Only when the
number of DEKs, which need to be synced, is over this threshold, the
sync process will start. Besides, it is done in system workqueue.
After SYNC_CRYPTO command is executed successfully, the bitmaps of
each bulk must be reset accordingly, so that the freed DEKs can be
reused. From the analysis in previous patch, the number of reused DEKs
can be calculated by hweight_long(need_sync XOR in_use), and the
need_sync bits can be reset by simply copying from in_use bits.
Two more list (avail_list and sync_list) are added for each pool. The
avail_list is for a bulk when all bits in need_sync are reset after
sync. If there is no avail deks, and all are be freed by users, the
bulk is moved to sync_list, instead of being destroyed in previous
patch, and waiting for the invalidation. While syncing, they are
simply reset need_sync bits, and moved to avail_list.
Besides, add a wait_for_free list for the to-be-free DEKs. It is to
avoid this corner case: when thread A is done with SYNC_CRYPTO but just
before starting to reset the bitmaps, thread B is alloc dek, and free
it immediately. It's obvious that this DEK can't be reused this time,
so put it to waiting list, and do free after bulk bitmaps reset is
finished.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We create a pool for each key type. For the pool, there is a struct
to store the info for all DEK objects of one bulk allocation. As we
use crypto->log_dek_obj_range, which is set to 12 in previous patch,
for the log_obj_range of bulk allocation, 4096 DEKs are allocated in
one time.
To trace the state of all the keys in a bulk, two bitmaps are created.
The need_sync bitmap is used to indicate the available state of the
corresponding key. If the bit is 0, it can be used (available) as it
either is newly created by FW, or SYNC_CRYPTO is executed and bit is
reset after it is freed by upper layer user (this is the case to be
handled in later patch). Otherwise, the key need to be synced. The
in_use bitmap is used to indicate the key is being used, and reset
when user free it.
When ktls, ipsec or macsec need a key from a bulk, it get one with
need_sync bit 0, then set both need_sync and in_used bit to 1. When
user free a key, only in_use bit is reset to 0. So, for the
combinations of (need_sync, in_use) of one DEK object,
- (0,0) means the key is ready for use,
- (1,1) means the key is currently being used by a user,
- (1,0) means the key is freed, and waiting for being synced,
- (0,1) is invalid state.
There are two lists in each pool, partial_list and full_list,
according to the number for available DEKs in a bulk. When user need a
key, it get a bulk, either from partial list, or create new one from
FW. Then the bulk is put in the different pool's lists according to
the num of avail deks it has. If there is no avail deks, and all of
them are be freed by users, for now, the bulk is destroyed.
To speed up the bitmap search, a variable (avail_start) is added to
indicate where to start to search need_sync bitmap for available key.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To support fast update of keys into hardware, we optimize firmware to
achieve the maximum rate. The approach is to create DEK objects in
bulk, and update each of them with modify command.
This patch supports bulk allocation and modify_dek commands for new
firmware. However, as log_obj_range is 0 for now, only one DEK obj is
allocated each time, and then updated with user key by modify_dek.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for SYNC_CRYPTO command. For now, it is executed only when
initializing DEK, but needed when reusing keys in later patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
New APIs are added to support fast update DEKs. As a pool is created
for each key purpose (type), one pair of pool APIs to get/put pool.
Anotehr pair of DEKs APIs is to get DEK object from pool and update it
with user key, or free it back to the pool. As The bulk allocation
and destruction will be supported in later patches, old implementation
is used here.
To support these APIs, pool and dek structs are defined first. Only
small number of fields are stored in them. For example, key_purpose
and refcnt in pool struct, DEK object id in dek struct. More fields
will be added to these structs in later patches, for example, the
different bulk lists for pool struct, the bulk pointer dek struct
belongs to, and a list_entry for the list in a pool, which is used to
save keys waiting for being freed while other thread is doing sync.
Besides the creation and destruction interfaces, new one is also added
to get obj id.
Currently these APIs are planned to used by TLS only.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move the common code to general functions which can be used by fast
update encryption key in later patches.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change key pointer to const void *, as there is no need to change the
key content. This is also to avoid modifying the key by mistake.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add CAP for crypto offload, do the simple initialization if hardware
supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be
created in one bulk allocation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change the naming of key type in DEK fields and macros, to be
consistent with the device spec.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add and extend structure layouts and defines for fast crypto key
update. This is a prerequisite to support bulk creation, key
modification and destruction, software wrapped DEK, and SYNC_CRYPTO
command.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before this patch, the log_obj_range was defined inside
general_obj_in_cmd_hdr to support bulk allocation. However, we need to
modify/query one of the object in the bulk in later patch, so change
those fields to param bits for parameters specific for cmd header, and
add general_obj_create_param according to what was updated in spec.
We will also add general_obj_query_param for modify/query later.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Take crypto API out of the generic mlx5.h header into a dedicated
header.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix indentation of server config options, and also since
support for very old, less secure, NTLM authentication was removed
(and quite a while ago), remove the mention of that in Kconfig, but
do note Kerberos (not just NTLMv2) which are supported and much
more secure.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_neg_token_init_mech_token() and ksmbd_neg_token_targ_resp_token()
share same implementation, unify them.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Arnd asks for the DCC driver to be dropped for now, in order to allow
for more thorough review, by a wider audience, of the ABI introduced.
The Devicetree binding is adequately describing the hardware block, so
this is kept.
Requested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove PARIDE core and high level protocols, taking care not to break
low-level drivers (used by pata_parport). Also update documentation.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
MT8195 VPPSYS 0/1 should be probed from mtk-mmsys driver to
populate device by platform_device_register_data then start
its own clock driver.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Link: https://lore.kernel.org/r/20230118031509.29834-2-moudy.ho@mediatek.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT7981 clock support, include topckgen, apmixedsys, infracfg and
ethernet subsystem clocks.
The drivers are based on clk-mt7981.c which can be found in MediaTek's
SDK sources. To be fit for upstream inclusion the driver has been split
into clock domains and the infracfg part has been significantly
de-bloated by removing all the 1:1 factors (aliases).
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/8136eb5b2049177bc2f6d3e0f2aefecc342d626f.1674703830.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[sboyd@kernel.org: Add module license]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT7981 clock dt-bindings, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e353d32b5a4481766519a037afe1ed44e31ece1a.1674703830.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are no more non-common calls in clk_mt7986_topckgen_probe():
migrate this driver to mtk_clk_simple_probe().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230120092053.182923-24-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Instead of calling clk_prepare_enable() on a bunch of clocks at probe
time, set the CLK_IS_CRITICAL flag to the same as these are required
to be always on, and this is the right way of achieving that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230120092053.182923-23-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
