The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.
Fixes: 7682de8b33 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current source pushes skb into dev-done queue by calling
skb_dequeue_tail() and then pop it by skb_dequeue() to branch to
rx_cleanup state for freeing urb/skb in usbnet_bh(). It takes extra CPU
load, 2.21% (skb_queue_tail) as follows,
- 11.58% 0.26% swapper [k] usbnet_bh
- 11.32% usbnet_bh
- 6.43% skb_dequeue
6.34% _raw_spin_unlock_irqrestore
- 2.21% skb_queue_tail
2.19% _raw_spin_unlock_irqrestore
- 1.68% consume_skb
- 0.97% kfree_skbmem
0.80% kmem_cache_free
0.53% skb_release_data
To reduce the extra CPU load use return values to call helper function
usb_free_skb() to free the resources instead of calling skb_queue_tail()
and skb_dequeue() for push and pop respectively.
- 7.87% 0.25% swapper [k] usbnet_bh
- 7.62% usbnet_bh
- 4.81% skb_dequeue
4.74% _raw_spin_unlock_irqrestore
- 1.75% consume_skb
- 0.98% kfree_skbmem
0.78% kmem_cache_free
0.58% skb_release_data
0.53% smsc95xx_rx_fixup
Signed-off-by: Leesoo Ahn <lsahn@ooseel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Divya Koppera says:
====================
Fixed warnings
Fixed warnings related to PTR_ERR and initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the NULL pointer case
Fixes New smatch warnings:
drivers/net/phy/micrel.c:2613 lan8814_ptp_probe_once() warn: passing zero to 'PTR_ERR'
vim +/PTR_ERR +2613 drivers/net/phy/micrel.c
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialized return variable
Fixes Old smatch warnings:
drivers/net/phy/micrel.c:1750 ksz886x_cable_test_get_status() error:
uninitialized symbol 'ret'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GPIO watchdog property name is 'always-running', not 'always-enabled'.
Use the correct property name and reinstate it into the DT.
Fixes: eff6b33c9c ("arm64: dts: imx8mm: Remove watchdog always-enabled property from eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Data buffer for active map is allocated in alloc_active_ring and freed
in free_active_ring function, which is used only for the error
cleanup. pvcalls_front_release is calling pvcalls_front_free_map which
ends foreign access for this buffer, but doesn't free allocated pages.
Call free_active_ring to clean all allocated resources.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/6a762ee32dd655cbb09a4aa0e2307e8919761311.1671531297.git.oleksii_moisieiev@epam.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
Fixes: 02e19f9c7c ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The function p2m_index is defined in the p2m.c file, but not called
elsewhere, so remove this unused function.
arch/x86/xen/p2m.c:137:24: warning: unused function 'p2m_index'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3557
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230105090141.36248-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Juergen Gross <jgross@suse.com>
This change adds support for nested IPsec tunnels by ensuring that
XFRM-I verifies existing policies before decapsulating a subsequent
policies. Addtionally, this clears the secpath entries after policies
are verified, ensuring that previous tunnels with no-longer-valid
do not pollute subsequent policy checks.
This is necessary especially for nested tunnels, as the IP addresses,
protocol and ports may all change, thus not matching the previous
policies. In order to ensure that packets match the relevant inbound
templates, the xfrm_policy_check should be done before handing off to
the inner XFRM protocol to decrypt and decapsulate.
Notably, raw ESP/AH packets did not perform policy checks inherently,
whereas all other encapsulated packets (UDP, TCP encapsulated) do policy
checks after calling xfrm_input handling in the respective encapsulation
layer.
Test: Verified with additional Android Kernel Unit tests
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
io_uring is using iter_ubuf types for single vector requests. We expect
state restore may happen for this type now, and it is already handled
correctly, so suppress the warning.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is more efficient than iter_iov.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[merge to 6.2, minor fixes]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is more efficient than iter_iov.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[merged to 6.2]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Like import_single_range(), but for ITER_UBUF.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dan reports the following smatch detected the following:
block/blk-cgroup.c:1863 blkcg_schedule_throttle() warn: sleeping in atomic context
caused by blkcg_schedule_throttle() calling blk_put_queue() in an
non-sleepable context.
blk_put_queue() acquired might_sleep() in 63f93fd6fa ("block: mark
blk_put_queue as potentially blocking") which transferred the might_sleep()
from blk_free_queue().
blk_free_queue() acquired might_sleep() in e8c7d14ac6 ("block: revert back
to synchronous request_queue removal") while turning request_queue removal
synchronous. However, this isn't necessary as nothing in the free path
actually requires sleeping.
It's pretty unusual to require a sleeping context in a put operation and
it's not needed in the first place. Let's drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lkml.kernel.org/r/Y7g3L6fntnTtOm63@kili
Cc: Christoph Hellwig <hch@lst.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Fixes: e8c7d14ac6 ("block: revert back to synchronous request_queue removal") # v5.9+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Y7iFwjN+XzWvLv3y@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, HBR2 (5.4G) is the max link rate be supported. This patch
uses the actual limit specified by DT and removes the artificial
limitation to 5.4 Gbps. Supporting HBR3 is a consequence of that.
Changes in v2:
-- add max link rate from dtsi
Changes in v3:
-- parser max_data_lanes and max_dp_link_rate from dp_out endpoint
Changes in v4:
-- delete unnecessary pr_err
Changes in v5:
-- split parser function into different patch
Changes in v9:
-- revised commit test
Changes in v13:
-- repalced "properity" with "property"
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516097/
Link: https://lore.kernel.org/r/1672163103-31254-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Changes in v6:
-- second patch after split parser patch into two patches
Changes in v7:
-- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate
Changes in v9:
-- separate parser link-frequencies out of data-lanes
Changes in v10:
-- add dp_parser_link_frequencies()
Changes in v11:
-- return 0 if(!endpoint)
Changes in v12:
-- replace khz with kbytes at dp_parser.h
Changes in v14:
-- replace "parser" with "parse" at commit subject
-- use do_div() for 64 bits division
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516100/
Link: https://lore.kernel.org/r/1672163103-31254-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add capability to parser data-lanes as property of dp_out endpoint.
Also retain the original capability to parser data-lanes as property
of mdss_dp node to handle legacy case.
Changes in v6:
-- first patch after split parser patch into two
Changes in v7:
-- check "data-lanes" from endpoint first
Changes in v14:
-- replace "parser" with "parse" at commit subject
-- add matching brackets at dp_parser_misc()
Changes in v15:
-- concise dp_parser_misc()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516096/
Link: https://lore.kernel.org/r/1672163103-31254-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To increase the flexibility of supporting different DP main link configuration
at different platform, add both data-lanes and link-frequencies property
into endpoint so that different platform can specify its own main link
combination of both data lanes and max supported link rate.
Changes in v7:
-- split yaml out of dtsi patch
-- link-frequencies from link rate to symbol rate
-- deprecation of old data-lanes property
Changes in v8:
-- correct Bjorn mail address to kernel.org
Changes in v10:
-- add menu item to data-lanes and link-frequecnis
Changes in v11:
-- add endpoint property at port@1
Changes in v12:
-- use enum for item at data-lanes and link-frequencies
Changes in v13:
-- revised changes at port@0
-- use correct ref schemas for both port@0 and port@1
-- mark both port@0 and port@1 are required
-- add line between data-lanes and link-frequencies properties
Changes in v14:
-- add "unevaluatedProperties: false: to endpoint at port@1
-- remove unnecessary quote to $ref
-- re store "$ref: /schemas/graph.yaml#/properties/port" to port@0
Changes in v15:
-- re store desciption of port@0
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/516094/
Link: https://lore.kernel.org/r/1672163103-31254-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.
For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.
This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514410/
Link: https://lore.kernel.org/r/20221207220012.16529-10-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller. In other configurations the HPD notification
might be delivered by the DRM framework from an associated bridge.
This difference is not appropriately represented by the "is_edp"
boolean, but is properly represented by the frameworks invocation of the
hpd_enable() and hpd_disable() callbacks. Switch the current condition
to rely on these callbacks instead.
This ensures appropriate handling of the three cases; no bridge
connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
DRM_BRIDGE_OP_HPD.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514414/
Link: https://lore.kernel.org/r/20221207220012.16529-9-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514395/
Link: https://lore.kernel.org/r/20221207220012.16529-8-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.
The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514394/
Link: https://lore.kernel.org/r/20221207220012.16529-7-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In preparation to adding the sm8350 and sm8450 PHYs support, rearrange
register values calculations in dsi_7nm_phy_enable(). This change bears
no functional changes itself, it is merely a preparation for the next
patch.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514232/
Link: https://lore.kernel.org/r/20221207012231.112059-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SM8350 and SM8450 platforms use the same driver and same bindings as the
existing 7nm DSI PHYs. Add corresponding compatibility strings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514228/
Link: https://lore.kernel.org/r/20221207012231.112059-4-dmitry.baryshkov@linaro.org
[DB: changed compatibles per Krzysztof's request]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.
Fixes: c6a57a50ad ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517211/
Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The kbuild test robot detected this by 'make versioncheck'.
Fixes: 2df8220cc5 ("kbuild: build init/built-in.a just once")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8d613a1d04 ("kbuild: drop $(objtree)/ prefix support
for clean-files") dropped support for prefixing with $(objtree).
Thus update the documentation to match that change.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.
By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.
While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514397/
Link: https://lore.kernel.org/r/20221207220012.16529-6-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221231231429.18357-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Some SoCs in the D1 family feature ARM CPUs instead of a RISC-V CPU.
In that case, the CPUs are driven from the 'cpux' clock, so it needs
to be marked as critical, since there is no consumer when DVFS is
disabled. This matches the drivers for other SoCs, and the "riscv"
clock in this driver.
Signed-off-by: András Szemző <szemzo.andras@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Allwinner released some 32-bit ARM (sun8i) SoCs which use the same CCU
as D1. Allow them to reuse the driver.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Do not duplicate the same expression on the `default` line, so the two
lines do not need to be kept in sync. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Three drivers had no conditions.
- SUN6I_RTC_CCU and SUN8I_DE2_CCU are used on current hardware
regardless of CPU architecture.
- SUN8I_R_CCU is only used on pre-H6 SoCs, which means no RISCV SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
SUNXI_CCU already depends on ARCH_SUNXI, so adding the dependency to
individual SoC drivers is redundant. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The ccu_*_find_best() functions already compute a best_rate at the same
time as the other factors. Return this value so the caller does not need
to duplicate the computation.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231173055.42384-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The DRAM controller clock is only allowed to change frequency while the
DRAM chips are in self-refresh. To support this, changes to the CLK_DRAM
mux and divider have no effect until acknowledged by the memory dynamic
frequency scaling (MDFS) hardware inside the DRAM controller. (There is
a SDRCLK_UPD bit in DRAM_CFG_REG which should serve a similar purpose,
but this bit actually does nothing.)
However, the MDFS hardware in H3 appears to be broken. Triggering a
frequency change using the procedure from similar SoCs (A64/H5) hangs
the hardware. Additionally, the vendor BSP specifically avoids using the
MDFS hardware on H3, instead performing all DRAM PHY parameter updates
and resets in software.
Thus, it is effectively impossible to change the CLK_DRAM mux/divider,
so those features should not be modeled. Add CLK_SET_RATE_PARENT so
frequency changes apply to PLL_DDR instead.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221229042230.24532-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Use '-' to separate the function name and its description.
Use '%' on constants in kernel-doc notation.
Use the kernel-doc Return: format for function return values.
Fixes this warning:
ccu_mmc_timing.c:21: warning: No description found for return value of 'sunxi_ccu_set_mmc_timing_mode'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221122184844.6794-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The mask only describes the `irq_idx % 32` part, making it generally
impossible to deduce what interrupt is being enabled/disabled. Since
`debug/core_irq` in debugfs (and other prints) also include the full
`DPU_IRQ_IDX()` value, print the same full value here for easier
correlation instead of only adding the `irq_idx / 32` part.
Furthermore, make the dbgstr messages more consistent.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512460/
Link: https://lore.kernel.org/r/20221121222456.437815-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might
be NULL and will cause null pointer dereference later.
Therefore, it might be better to check it and directly return -ENOMEM.
Fixes: 77b001acdc ("drm/msm/dpu: add the writeback connector layer")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512277/
Link: https://lore.kernel.org/r/20221119055518.179937-1-tanghui20@huawei.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SDM845 only has INTF0-3 and has no business caring about the INTF4 irq.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/510463/
Link: https://lore.kernel.org/r/20221107103739.8993-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- Remove some incorrect assertions.
- Fix compiler warnings about variables that could be static.
- Fix an off by one error when computing the maximum btree height that
can cause repair failures.
- Fix the bulkstat-single ioctl not returning the root inode when asked
to do that.
- Convey NOFS state to inodegc workers to avoid recursion in reclaim.
- Fix unnecessary variable initializations.
- Fix a bug that could result in corruption of the busy extent tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tWyP
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Remove some incorrect assertions
- Fix compiler warnings about variables that could be static
- Fix an off by one error when computing the maximum btree height that
can cause repair failures
- Fix the bulkstat-single ioctl not returning the root inode when asked
to do that
- Convey NOFS state to inodegc workers to avoid recursion in reclaim
- Fix unnecessary variable initializations
- Fix a bug that could result in corruption of the busy extent tree
* tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix extent busy updating
xfs: xfs_qm: remove unnecessary ‘0’ values from error
xfs: Fix deadlock on xfs_inodegc_worker
xfs: get root inode correctly at bulkstat
xfs: fix off-by-one error in xfs_btree_space_to_height
xfs: make xfs_iomap_page_ops static
xfs: don't assert if cmap covers imap after cycling lock
