We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
When sequence replay is enabled for media clock recovery, current
implementation refers to cache of sequence descriptors in tx packets, then
fulfil sequence descriptors for rx packets. The initialization for rx
packets is done before starting packet streaming, while it can be postponed
till the cache has enough entries for the replay.
This commit refactors for the purpose as well as minor code change for
renaming of structure member.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When sequence replay is enabled for media clock recovery, current
implementation caches sequence descriptors from packet descriptors in tx
packets. Helper function for the purpose do not necessarily have good
readability.
This commit refactors relevant functions by renaming structure members,
function name, and function local variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When scheduling transmission of rx packets, current implementation
fulfils packet descriptors after pooling sequence descriptors. It is for
packet queueing. Besides the implementations do not necessarily have
good readability.
This commit refactors them by adding function local variables and
function arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When scheduling transmission of rx packets, current implementation pools
sequence descriptors at first for media clock. Two methods are used for
the purpose depending on four cases, while the implementations do not
necessarily have good readability.
This commit refactors them by adding function pointers and functions
arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Three fixes for various bogosity in our linker script, revealed by the recent commit
which changed discard behaviour with some toolchains.
-----BEGIN PGP SIGNATURE-----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=QBMl
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Three fixes for various bogosity in our linker script, revealed
by the recent commit which changed discard behaviour with some
toolchains.
* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vmlinux.lds: Don't discard .comment
powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
Add support of identification registers to STM32 DFSDM
to allow hardware capabilities discovery and configuration check.
The number of filters and channels, are read from registers,
when they are available.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The magnetometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS3MDL magnetometer, so just
add the new st,lsm303c-magn compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ST LSM303C [1] is a accelerometer and magnetometer combo sensor
compatible with the existing ST sensor bindings. Accelerometer and
magnetometer are exposed through separate I2C/SPI devices, so document
separate compatibles with -accel and -magn suffix.
[1]: https://www.st.com/resource/en/datasheet/lsm303c.pdf
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The following kernel linkage error:
st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup':
st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext'
is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext()
(drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be
built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c)
is built-in.
The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another
select for IIO_TRIGGERED_BUFFER, to make that option follow what is set
for the st_lsm6dsx driver. This is similar to what other iio drivers do.
Fixes: 2cfb2180c3 ("iio: imu: st_lsm6dsx: introduce sw trigger support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no point to specify asm-generic for the unaligned.h.
Drop the 'generic' suffix and move the inclusion to be after
the non-IIO linux/* ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused and code is obfuscated
by ifdeffery.
Drop anti-pattern of ACPI_PTR() use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The spi_get_device_match_data() helps to get driver data from the
firmware node or SPI ID table. Use it instead of open coding.
While at it, switch ID tables to provide an acrual pointers to
the configuration data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It is useful to be able to build this driver without needing
to build support for ARCH_EP93XX.
Also add an explicit dependency on HAS_IOMEM so we have
devm_platform_ioremap_resource() etc available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old
in get_acl. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
* Fix kernel-doc for memblock_phys_free() to use correct names for the
counterpart allocation methods
* Fix compilation error in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFMBAABCAA2FiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmO6bMYYHG1pa2UucmFw
b3BvcnRAZ21haWwuY29tAAoJEDkDhibLDv2RUt8H/Ayh8cO8kpKbJ2jH9eFwba6T
JPOv5P3hjKHbY+NMGG9MfAUTMw6Lxa59EiC+xGyPFWrtt/ZpKgaaBznxSC7dkVYy
XarzK3zulZmL4BdjBQearXXj5gSkZnuEHb9Pjs19GLDnGoRJczoHYG6rXlAWh1sg
w4H4g4QyHKYqqUlnbDi0GTIaaKY76Uprw6x6w8xwtmdUw9+1edqnoN9fRJxY9AwM
7ez7FR6rJ5g7AgcLfa/dTaCZgloLPKVdMI+q29lBXM5xDrUpxeEfXg5iU7Hax+rT
4o43HXGVGyiuWYlgdWd9B18M4Xma55K1Q+cQ3cELsAvq7XACvQcA6xi0QnFfgpU=
=DNKq
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
-----BEGIN PGP SIGNATURE-----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=iwoA
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20230107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix race between call connection, data transmit and call disconnect
Here are patches to fix an oops[1] caused by a race between call
connection, initial packet transmission and call disconnection which
results in something like:
kernel BUG at net/rxrpc/peer_object.c:413!
when the syzbot test is run. The problem is that the connection procedure
is effectively split across two threads and can get expanded by taking an
interrupt, thereby adding the call to the peer error distribution list
*after* it has been disconnected (say by the rxrpc socket shutting down).
The easiest solution is to look at the fourth set of I/O thread
conversion/SACK table expansion patches that didn't get applied[2] and take
from it those patches that move call connection and disconnection into the
I/O thread. Moving these things into the I/O thread means that the
sequencing is managed by all being done in the same thread - and the race
can no longer happen.
This is preferable to introducing an extra lock as adding an extra lock
would make the I/O thread have to wait for the app thread in yet another
place.
The changes can be considered as a number of logical parts:
(1) Move all of the call state changes into the I/O thread.
(2) Make client connection ID space per-local endpoint so that the I/O
thread doesn't need locks to access it.
(3) Move actual abort generation into the I/O thread and clean it up. If
sendmsg or recvmsg want to cause an abort, they have to delegate it.
(4) Offload the setting up of the security context on a connection to the
thread of one of the apps that's starting a call. We don't want to be
doing any sort of crypto in the I/O thread.
(5) Connect calls (ie. assign them to channel slots on connections) in the
I/O thread. Calls are set up by sendmsg/kafs and passed to the I/O
thread to connect. Connections are allocated in the I/O thread after
this.
(6) Disconnect calls in the I/O thread.
I've also added a patch for an unrelated bug that cropped up during
testing, whereby a race can occur between an incoming call and socket
shutdown.
Note that whilst this fixes the original syzbot bug, another bug may get
triggered if this one is fixed:
INFO: rcu detected stall in corrupted
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P5792 } 2657 jiffies s: 2825 root: 0x0/T
rcu: blocking rcu_node structures (internal RCU debug):
It doesn't look this should be anything to do with rxrpc, though, as I've
tested an additional patch[3] that removes practically all the RCU usage
from rxrpc and it still occurs. It seems likely that it is being caused by
something in the tunnelling setup that the syzbot test does, but there's
not enough info to go on. It also seems unlikely to be anything to do with
the afs driver as the test doesn't use that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 32-bit memory resource is needed for non-prefetchable memory
allocations on the PCIe bus, however with some cards (such as the
SM768) the system fails to allocate memory from this.
Checking the allocation against the datasheet, it looks like there
has been a mis-calcualation of the resource for the first memory
region (0x0060090000..0x0070ffffff) which in the data-sheet for
the fu740 (v1p2) is from 0x0060000000..0x007fffffff. Changing
this to allocate from 0x0060090000..0x007fffffff fixes the probing
issues.
Fixes: ae80d51480 ("riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC")
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: stable@vger.kernel.org
Tested-by: Ron Economos <re@w6rz.net> # from IRC
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Highlights include:
Bugfixes
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
-----BEGIN PGP SIGNATURE-----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=N6cT
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
-----BEGIN PGP SIGNATURE-----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=qIdA
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
of/fdt: run soc memory setup when early_init_dt_scan_memory fails
Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were on
the mailing list for a long time and passed all the 0-day bot testing
so all should be fine with them as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY7mSJQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl2JACg2BSLmfVYhG6guZHq5KxerYG3/uYAoJx/qDgn
PefqVtyFfd+LClygKdOS
=Ax7a
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were
on the mailing list for a long time and passed all the 0-day bot
testing so all should be fine with them as well"
* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Ignore End Transfer delay on teardown
usb: dwc3: xilinx: include linux/gpio/consumer.h
usb: fotg210-udc: fix error return code in fotg210_udc_probe()
usb: fotg210: fix OTG-only build
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
A big data corruption regression due to a change in the scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5
- Do not wrongly combine non-contiguous pages in scatterlist
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY7izVgAKCRCFwuHvBreF
YfOXAQC08HilnYdRjlVrxswOQIN1KzHQ63xDXM0Rv99XOcSKCgD+LeXkeCeJ0XWW
kBtkPnhR194phADv4nWaaSrIc52DtA0=
=HxxG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Most noticeable is that Yishai found a big data corruption regression
due to a change in the scatterlist:
- Do not wrongly combine non-contiguous pages in scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to merge contiguous pages into the last SG properly
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
RDMA/srp: Move large values to a new enum for gcc13
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
-----BEGIN PGP SIGNATURE-----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=O13V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: readd -w option when vmlinux.o or Module.symver is missing
kbuild: fix single *.ko build
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Fixes: 9315564747 ("NFSD: Use only RQ_DROPME to signal the need to drop a reply")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the TMIO MFD drivers gone, the NAND support is also
obsolete and can be removed.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Up to now the pasemi nand driver only supported a single device
instance. However the check for that was racy because two parallel calls
of pasemi_nand_probe() could pass the check
if (pasemi_nand_mtd)
return -ENODEV;
before any of them assigns a non-NULL value to it.
So rework the driver to make use of per-device driver data.
As an intended side effect the driver can bind more than one device and
also gets rid of the check
if (!pasemi_nand_mtd)
return 0;
in the remove callback that could only ever trigger after the above race
happened.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230102124051.1508424-1-u.kleine-koenig@pengutronix.de
My professional email will change and the microchip one will bounce after
mid-november of 2022.
Update the MAINTAINERS file, the YAML bindings, MODULE_AUTHOR entries and
author mentions, and add an entry in the .mailmap file.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221226144043.367706-1-tudor.ambarus@linaro.org
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
If *.conf.default is updated, builtin-policy.h should be rebuilt,
but this does not work when compiled with O= option.
[Without this commit]
$ touch security/tomoyo/policy/exception_policy.conf.default
$ make O=/tmp security/tomoyo/
make[1]: Entering directory '/tmp'
GEN Makefile
CALL /home/masahiro/ref/linux/scripts/checksyscalls.sh
DESCEND objtool
make[1]: Leaving directory '/tmp'
[With this commit]
$ touch security/tomoyo/policy/exception_policy.conf.default
$ make O=/tmp security/tomoyo/
make[1]: Entering directory '/tmp'
GEN Makefile
CALL /home/masahiro/ref/linux/scripts/checksyscalls.sh
DESCEND objtool
POLICY security/tomoyo/builtin-policy.h
CC security/tomoyo/common.o
AR security/tomoyo/built-in.a
make[1]: Leaving directory '/tmp'
$(srctree)/ is essential because $(wildcard ) does not follow VPATH.
Fixes: f02dee2d14 ("tomoyo: Do not generate empty policy files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Drop removed INT3 handling code from kprobe_int3_handler() because this
case (get_kprobe() doesn't return corresponding kprobe AND the INT3 is
removed) must not happen with the kprobe managed INT3, but can happen
with the non-kprobe INT3, which should be handled by other callbacks.
For the kprobe managed INT3, it is already safe. The commit 5c02ece818
("x86/kprobes: Fix ordering while text-patching") introduced
text_poke_sync() to the arch_disarm_kprobe() right after removing INT3.
Since this text_poke_sync() uses IPI to call sync_core() on all online
cpus, that ensures that all running INT3 exception handlers have done.
And, the unregister_kprobe() will remove the kprobe from the hash table
after arch_disarm_kprobe().
Thus, when the kprobe managed INT3 hits, kprobe_int3_handler() should
be able to find corresponding kprobe always by get_kprobe(). If it can
not find any kprobe, this means that is NOT a kprobe managed INT3.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166981518895.1131462.4693062055762912734.stgit@devnote3
In order for the scheduler to be frequency invariant we measure the
ratio between the maximum CPU frequency and the actual CPU frequency.
During long tickless periods of time the calculations that keep track
of that might overflow, in the function scale_freq_tick():
if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt))
goto error;
eventually forcing the kernel to disable the feature for all CPUs,
and show the warning message:
"Scheduler frequency invariance went wobbly, disabling!".
Let's avoid that by limiting the frequency invariant calculations
to CPUs with regular tick.
Fixes: e2b0d619b4 ("x86, sched: check for counters overflow in frequency invariant accounting")
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lore.kernel.org/r/20221130125121.34407-1-ypodemsk@redhat.com
Grab the ATA port lock in sas_ata_device_link_abort() before calling
ata_link_abort() as outlined in this function's locking requirements.
Fixes: 4411292267 ("scsi: libsas: Add sas_ata_device_link_abort()")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The reserved tags were put in the lower region of the tagset in commit
f7d190a94e ("scsi: hisi_sas: Put reserved tags in lower region of
tagset"). However, only the allocate function was changed, freeing was not
handled. This resulted in a failure to boot:
[ 33.467345] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]!
[ 33.473413] sas: Executing internal abort failed 5000000000000603 (-132)
[ 33.480088] hisi_sas_v3_hw 0000:b4:02.0: I_T nexus reset: internal abort (-132)
[ 33.657336] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]!
[ 33.663403] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 35.787344] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]!
[ 35.793411] sas: Executing internal abort failed 5000000000000703 (-132)
[ 35.800084] hisi_sas_v3_hw 0000:b4:04.0: I_T nexus reset: internal abort (-132)
[ 35.977335] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]!
[ 35.983403] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 35.989643] ata10.00: revalidation failed (errno=-5)
Fixes: f7d190a94e ("scsi: hisi_sas: Put reserved tags in lower region of tagset")
Cc: John Garry <john.g.garry@oracle.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Acked-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/202212031419324523731@zte.com.cn
strdup() allocates memory for key_name. We need to release the memory in
the following error paths. Add free() to avoid memory leak.
Fixes: 1e7e478838 ("x86/static_call: Add inline static call implementation for x86-64")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221205080642.558583-1-linmq006@gmail.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Keep track of previously issued registrations and compare the result
with MEMBARRIER_CMD_GET_REGISTRATIONS return value.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-3-mclapinski@google.com
Provide a method to query previously issued registrations.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-2-mclapinski@google.com
The max CPU capacity is the same for all CPUs sharing frequency domain.
There is a way to avoid heavy operations in a loop for each CPU by
leveraging this knowledge. Thus, simplify the looping code in the
sugov_next_freq_shared() and drop heavy multiplications. Instead, use
simple max() to get the highest utilization from these CPUs.
This is useful for platforms with many (4 or 6) little CPUs. We avoid
heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions
of times, since it's not limited by the schedutil time delta filter in
sugov_should_update_freq(). When there was no need to change frequency
the code bailed out, not updating the sg_policy::last_freq_update_time.
Then every visit after delta_ns time longer than the
sg_policy::freq_update_delay_ns goes through and triggers the next
frequency calculation code. Although, if the next frequency, as outcome
of that, would be the same as current frequency, we won't update the
sg_policy::last_freq_update_time and the story will be repeated (in
a very short period, sometimes a few microseconds).
The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.
The fetched CPU capacity value is than used in sugov_iowait_apply() to
calculate the right boost. This required a few changes in the local
functions and arguments. The capacity value should hopefully be fetched
once when needed and then passed over CPU registers to those functions.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221208160256.859-2-lukasz.luba@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
ttwu_do_activate() is used for a complete wakeup, in which we will
activate_task() and use ttwu_do_wakeup() to mark the task runnable
and perform wakeup-preemption, also call class->task_woken() callback
and update the rq->idle_stamp.
Since ttwu_runnable() is not a complete wakeup, don't need all those
done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate()
to simplify ttwu_do_wakeup(), making it only mark the task runnable
to be reused in ttwu_runnable() and try_to_wake_up().
This patch should not have any functional changes.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221223103257.4962-2-zhouchengming@bytedance.com
ttwu_runnable() is used as a fast wakeup path when the wakee task
is running on CPU or runnable on RQ, in both cases we can just
set its state to TASK_RUNNING to prevent a sleep.
If the wakee task is on_cpu running, we don't need to update_rq_clock()
or check_preempt_curr().
But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
the task got to schedule() and the task been preempted), we should
check_preempt_curr() to see if it can preempt the current running.
This also removes the class->task_woken() callback from ttwu_runnable(),
which wasn't required per the RT/DL implementations: any required push
operation would have been queued during class->set_next_task() when p
got preempted.
ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
the rq cannot be idle in this scenario.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221223103257.4962-1-zhouchengming@bytedance.com
An incoming call can race with rxrpc socket destruction, leading to a
leaked call. This may result in an oops when the call timer eventually
expires:
BUG: kernel NULL pointer dereference, address: 0000000000000874
RIP: 0010:_raw_spin_lock_irqsave+0x2a/0x50
Call Trace:
<IRQ>
try_to_wake_up+0x59/0x550
? __local_bh_enable_ip+0x37/0x80
? rxrpc_poke_call+0x52/0x110 [rxrpc]
? rxrpc_poke_call+0x110/0x110 [rxrpc]
? rxrpc_poke_call+0x110/0x110 [rxrpc]
call_timer_fn+0x24/0x120
with a warning in the kernel log looking something like:
rxrpc: Call 00000000ba5e571a still in use (1,SvAwtACK,1061d,0)!
incurred during rmmod of rxrpc. The 1061d is the call flags:
RECVMSG_READ_ALL, RX_HEARD, BEGAN_RX_TIMER, RX_LAST, EXPOSED,
IS_SERVICE, RELEASED
but no DISCONNECTED flag (0x800), so it's an incoming (service) call and
it's still connected.
The race appears to be that:
(1) rxrpc_new_incoming_call() consults the service struct, checks sk_state
and allocates a call - then pauses, possibly for an interrupt.
(2) rxrpc_release_sock() sets RXRPC_CLOSE, nulls the service pointer,
discards the prealloc and releases all calls attached to the socket.
(3) rxrpc_new_incoming_call() resumes, launching the new call, including
its timer and attaching it to the socket.
Fix this by read-locking local->services_lock to access the AF_RXRPC socket
providing the service rather than RCU in rxrpc_new_incoming_call().
There's no real need to use RCU here as local->services_lock is only
write-locked by the socket side in two places: when binding and when
shutting down.
Fixes: 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and local processor work")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
The runtime PM core checks with runtime_idle callback whether it can
goes to the runtime suspend or not, and we can put the boost type
check there instead of runtime_suspend and _resume calls. This will
reduce the unnecessary runtime_suspend() calls.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105093531.16960-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
