The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs
(using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer
0x104a, device 0x2201). It does not keep the previously programmed
minimum, maximum and critical temperatures after system suspend and
resume (which is a shutdown / startup cycle for the JC42 temperature
sensor). This results in an alarm on system resume because the hardware
default for these values is 0°C (so any environment temperature greater
than 0°C will trigger the alarm).
Example before system suspend:
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C)
(high = +85.0°C, hyst = +85.0°C)
(crit = +95.0°C, hyst = +95.0°C)
Example after system resume (without this change):
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C) ALARM (HIGH, CRIT)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C, hyst = +0.0°C)
Apply the cached values from the JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where
the SMBUS register is not related to this issue but a side-effect of
using regcache_sync() during system resume with the previously
cached/programmed values. This fixes the alarm due to the hardware
defaults of 0°C because the previously applied limits (set by userspace)
are re-applied on system resume.
Fixes: 175c490c9e ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit c112d75840 ("hwmon: OCC drivers are ARM-only") made the OCC
sensor drivers not selectable on powerpc64:
These drivers are for a BMC inside PowerPC servers. The BMC runs on
ARM hardware, so only propose the drivers on this architecture, unless
build-testing.
... but we now have a powerpc64 BMC (still for a powerpc64 host), so
drop the `depends on` that excludes building for this platform.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221024081527.3842565-1-jk@codeconstruct.com.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit adds support for Ampere SMpro hwmon driver. This driver
supports accessing various CPU sensors provided by the SMpro co-processor
including temperature, power, voltages, and current.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/7773541795f280db31dd981ffc21df8a630b794a.1666357434.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.
This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,
/*
* When there are no more users of probe(),
* rename probe_new to probe.
*/
if (driver->probe_new)
status = driver->probe_new(client);
else if (driver->probe)
status = driver->probe(client,
i2c_match_id(driver->id_table, client));
else
status = -EINVAL;
Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).
This change was done using the following Coccinelle script, and fixed
up for whitespace changes:
@ rule1 @
identifier fn;
identifier client, id;
@@
- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}
@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@
struct i2c_driver driver = {
- .probe
+ .probe_new
=
(
fn
|
- &fn
+ fn
)
,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20221011143309.3141267-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Check there is a chip before using force_id parameter as there
is no value in registering a non-existent chip
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20221004210100.540120-3-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add parameter to ignore ACPI resource conflicts as an alternate to using
'acpi_enforce_resources=lax'.
Some BIOSes reserve resources and don't use them and the system wide
parameter may result in failures to certain drivers.
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20221004210100.540120-2-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Don't populate the read-only const arrays names and watchdog_minors
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221005152752.318493-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document that describes how BPF iterators work, how to use iterators,
and how to pass parameters in BPF iterators.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Sreevani Sreejith <psreep@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221202221710.320810-2-ssreevani@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When there's only one buffer to dma and its length is 4096, then
only one data descriptor is needed to carry it according to current
descriptor definition. So the descriptor type should be `simple`
instead of `gather`, the latter requires more than one descriptor,
otherwise it'll be dropped by application firmware.
Fixes: c10d12e3dc ("nfp: add support for NFDK data path")
Fixes: d9d950490a ("nfp: nfdk: implement xdp tx path for NFDK")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Richard Donkin <richard.donkin@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221202134646.311108-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The implementation of strscpy() is more robust and safer.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Martin mentioned that the verifier cannot assume arguments from
LSM hook sk_alloc_security being trusted since after the hook
is called, the sk ref_count is set to 1. This will overwrite
the ref_count changed by the bpf program and may cause ref_count
underflow later on.
I then further checked some other hooks. For example,
for bpf_lsm_file_alloc() hook in fs/file_table.c,
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
The input parameter 'f' to security_file_alloc() cannot be trusted
as well.
Specifically, I investiaged bpf_map/bpf_prog/file/sk/task alloc/free
lsm hooks. Except bpf_map_alloc and task_alloc, arguments for all other
hooks should not be considered as trusted. This may not be a complete
list, but it covers common usage for sk and task.
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203204954.2043348-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song says:
====================
Patch set [1] added rcu support for bpf programs. In [1], a rcu
pointer is considered to be trusted and not null. This is actually
not true in some cases. The rcu pointer could be null, and for non-null
rcu pointer, it may have reference count of 0. This small patch set
fixed this problem. Patch 1 is the kernel fix. Patch 2 adjusted
selftests properly. Patch 3 added documentation for newly-introduced
KF_RCU flag.
[1] https://lore.kernel.org/all/20221124053201.2372298-1-yhs@fb.com/
Changelogs:
v1 -> v2:
- rcu ptr could be NULL.
- non_null_rcu_ptr->rcu_field can be marked as MEM_RCU as well.
- Adjust the code to avoid existing error message change.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add MEM_RCU pointer null checking for related tests. Also
modified task_acquire test so it takes a rcu ptr 'ptr' where
'ptr = rcu_ptr->rcu_field'.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184607.478314-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
introduced MEM_RCU and bpf_rcu_read_lock/unlock() support. In that
commit, a rcu pointer is tagged with both MEM_RCU and PTR_TRUSTED
so that it can be passed into kfuncs or helpers as an argument.
Martin raised a good question in [1] such that the rcu pointer,
although being able to accessing the object, might have reference
count of 0. This might cause a problem if the rcu pointer is passed
to a kfunc which expects trusted arguments where ref count should
be greater than 0.
This patch makes the following changes related to MEM_RCU pointer:
- MEM_RCU pointer might be NULL (PTR_MAYBE_NULL).
- Introduce KF_RCU so MEM_RCU ptr can be acquired with
a KF_RCU tagged kfunc which assumes ref count of rcu ptr
could be zero.
- For mem access 'b = ptr->a', say 'ptr' is a MEM_RCU ptr, and
'a' is tagged with __rcu as well. Let us mark 'b' as
MEM_RCU | PTR_MAYBE_NULL.
[1] https://lore.kernel.org/bpf/ac70f574-4023-664e-b711-e0d3b18117fd@linux.dev/
Fixes: 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184602.477272-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This reverts commit f35b5d7d67.
It has been reported to cause huge performance regressions on some loads
(will-it-scale.per_process_ops, but also building the kernel with
clang).
The commit did speed up gcc builds by a small amount, so it's not an
unambiguous regression, but until the big regressions are understood,
let's revert it.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
see an already freed event
-----BEGIN PGP SIGNATURE-----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=jo4r
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a use-after-free case where the perf pending task callback would
see an already freed event
* tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_pending_task() UaF
whether clock events are received during S3 or not which locks up other
RISC-V platforms. The issue will be fixed differently later.
-----BEGIN PGP SIGNATURE-----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=Urji
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Revert a fix to RISC-V timers supposed to address an uncertainty
whether clock events are received during S3 or not which locks up
other RISC-V platforms. The issue will be fixed differently later.
* tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
- a fix for Raydium touchscreen driver to stop leaking memory when
sending commands to the chip.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY4wjZwAKCRBAj56VGEWX
nJI2AQCcfR1zDi8yQOtR2KjKK0DJX7QmKQVK/SbodlFNUnYNPgD8CpDM67vH6Sle
g2TpbVin8186G+a1PBu21NbdbicHYQA=
=AbZG
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Raydium touchscreen driver to stop leaking memory when
sending commands to the chip
* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
vm_open() is not allowed to fail. Fortunately we are guaranteed that
the pages are already pinned, thanks to the initial mmap which is now
being cloned into a forked process, and only need to increment the
refcnt. So just increment it directly. Previously if a signal was
delivered at the wrong time to the forking process, the
mutex_lock_interruptible() could fail resulting in the pages_use_count
not being incremented.
Fixes: 2194a63a81 ("drm: Add library for shmem backed GEM objects")
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130185748.357410-3-robdclark@gmail.com
./fs/xfs/xfs_iomap.c: xfs_error.h is included more than once.
./fs/xfs/xfs_iomap.c: xfs_errortag.h is included more than once.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3337
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
The patch from Yuan Can fixes a memory leak in floppy init code.
Signed-off-by: Denis Efremov <efremov@linux.com>
-----BEGIN PGP SIGNATURE-----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=jO9b
-----END PGP SIGNATURE-----
Merge tag 'floppy-for-6.2' of https://github.com/evdenis/linux-floppy into for-6.2/block
Pull floppy fix from Denis:
"Floppy patch for 6.2
The patch from Yuan Can fixes a memory leak in floppy init code.
Signed-off-by: Denis Efremov <efremov@linux.com>"
* tag 'floppy-for-6.2' of https://github.com/evdenis/linux-floppy:
floppy: Fix memory leak in do_floppy_init()
<linux/prandom.h> uses DO_ONCE(), so it should include <linux/once.h>
directly. In contrast, <linux/random.h> does not use code from
<linux/once.h>, so it should be removed.
Move the `#include <linux/once.h>` line into the right file.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Fixes: c0842fbc1b ("random32: move the pseudo-random 32-bit definitions to prandom.h")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The theory behind the jitter dance is that multiple things are poking at
the same cache line. This only works, however, if what's being poked at
is actually all in the same cache line. Ensure this is the case by
aligning the struct on the stack to the cache line size.
We can't use ____cacheline_aligned on a stack variable, because gcc
assumes 16 byte alignment when only 8 byte alignment is provided by the
kernel, which means gcc could technically do something pathological
like `(rsp & ~48) - 64`. It doesn't, but rather than risk it, just do
the stack alignment manually with PTR_ALIGN and an oversized buffer.
Fixes: 50ee7529ec ("random: try to actively add entropy rather than passively wait for it")
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than just relying on interaction between cache lines of the timer
and the main loop, also explicitly take into account the fact that the
timer might fire at some time that's hard to predict, due to scheduling,
interrupts, or cross-CPU conditions. Mix in a cycle counter during the
firing of the timer, in addition to the existing one during the
scheduling of the timer. It can't hurt and can only help.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than merely hoping that the callback gets called on another CPU,
arrange for that to actually happen, by round robining which CPU the
timer fires on. This way, on multiprocessor machines, we exacerbate
jitter by touching the same memory from multiple different cores.
There's a little bit of tricky bookkeeping involved here, because using
timer_setup_on_stack() + add_timer_on() + del_timer_sync() will result
in a use after free. See this sample code: <https://xn--4db.cc/xBdEiIKO/c>.
Instead, it's necessary to call [try_to_]del_timer_sync() before calling
add_timer_on(), so that the final call to del_timer_sync() at the end of
the function actually succeeds at making sure no handlers are running.
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Goto label 'free' where it will kfree the 'in' is not needed though
it's safe to kfree NULL. Return err code directly to simplify the code.
1973 free:
1974 kfree(in);
1975 return err;
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20221203033714.25870-1-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.
Fixes: e711f968c4 ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c6 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto.
Fixes: 97167e8134 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Disable all of drivers/infiniband/hw/ and rdmavt for UML builds until
someone needs it and provides patches to support it.
This prevents build errors in hw/qib/qib_wc_x86_64.c.
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-rdma@vger.kernel.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Link: https://lore.kernel.org/r/20221202211940.29111-1-rdunlap@infradead.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
timer_read() was using an empty 100-iteration loop to wait for the
TMR_CVWR register to capture the latest timer counter value. The delay
wasn't long enough. This resulted in CPU idle time being extremely
underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.
Switch to the approach used in the vendor kernel, which implements the
capture delay by reading TMR_CVWR a few times instead.
Fixes: 49cbe78637 ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/202212021042043546303@zte.com.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The timer was missing the clock and reset like the other peripherals.
Add them to allow the timer to continue working after boot completes.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-2-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few cleanups which should not have any functional impact:
1. Trim addresses in "reg" to 8 digits.
2. Align LED node names with dtschema.
3. omap: echo: Use preferred enable-gpios property for LP5523 LED.
-----BEGIN PGP SIGNATURE-----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=TERX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOMjAEACgkQmmx57+YA
GNmqDA/+KOknX4g8MM8lcMH4D+sTZdBfQlJt5Wjca1DSuXerVpSzfNph4Jn6i8d8
ic1hSIH5HNi9LS4/Fvf5Js8Yc82VjcJG+BGz2xNPbOeO7n0b5/OsQeJJnNYG0EF+
26xtVhWXC/wrmEpkbc6tOffKbKKtrHWZ3KhlXSA5aVD1nMl29hOYanEy+NrWZEKT
hCrB0P+nV52DF9KvdUm5ZLrOhO3DB3o2BFeuJkG0Y1LbyGToNz5efRrU/RKaeBt/
jps8Rhea7brneqqepdEOcrRte7NCKWk4zaptVQWWX4Wu+0H5W76i78aaKs6kquVn
rmvIP+4zW/dEJmfkMmh4z2Mt4HRFd9C5O1vlWOAPPa2yTmTwxSvimOc4Ns9bfFJZ
LUbG1bt1TcEykFG5zKJ6cL/YNXexVnf/JJlX0RUbP1otr3BTvvC5G/4kEaKq8bf4
SCFS38Yr83W1eXwEgqBD/fl6d4dsRJKmRX5pjYZg16x5IvCwxnvwjIa2oRlaGKGs
sBL57pw7Z9IhalRMqqJpM0bt32jZEwcO8jWENCmicRTcCug5jUr5gr5p9luTLvwf
Yffak5cuXujVqCdG8AiL4eurCQ4J1+TOwwqtkl87jm3Sh1xXTuPrh8M+WfKXVi1o
nI0pCswqmxV+GVR8PCq0wADnxIGA+mjlmKORB8Qkvr8dRn1AGn8=
=5zhf
-----END PGP SIGNATURE-----
Merge tag 'dt-cleanup-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.2, part two
Few cleanups which should not have any functional impact:
1. Trim addresses in "reg" to 8 digits.
2. Align LED node names with dtschema.
3. omap: echo: Use preferred enable-gpios property for LP5523 LED.
* tag 'dt-cleanup-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: align LED node names with dtschema
ARM: dts: am335x: align LED node names with dtschema
ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED
ARM: dts: omap: align LED node names with dtschema
ARM: dts: logicpd: align LED node names with dtschema
ARM: dts: lpc32xx: trim addresses to 8 digits
ARM: dts: imx: trim addresses to 8 digits
ARM: dts: omap: trim addresses to 8 digits
Link: https://lore.kernel.org/r/20221204082909.5649-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This includes:
* L1/L2 cache topology for t600x
* CPUfreq nodes for t8103/t600x
* DT binding for CPUfreq
* Associated MAINTAINERS update
The CPUfreq driver was already merged for 6.2 via its tree.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCY4wjTAAKCRAd+FPLCI8z
YpOSAP9cRxrug+82UVjMWkrstNQp4oYPIxLnDKZQeeT5HWqMfwD6AwpuhZLDl04v
n4zzccTJAVJJWJZi961Cw9/9Zb0bRw0=
=MXJs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L7ez
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-6.2-v2' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.2 (v2).
This includes:
* L1/L2 cache topology for t600x
* CPUfreq nodes for t8103/t600x
* DT binding for CPUfreq
* Associated MAINTAINERS update
The CPUfreq driver was already merged for 6.2 via its tree.
* tag 'asahi-soc-dt-6.2-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: Add CPU topology & cpufreq nodes for t600x
arm64: dts: apple: Add CPU topology & cpufreq nodes for t8103
dt-bindings: cpufreq: apple,soc-cpufreq: Add binding for Apple SoC cpufreq
MAINTAINERS: Add entries for Apple SoC cpufreq driver
arm64: dts: apple: Add t600x L1/L2 cache properties and nodes
Link: https://lore.kernel.org/r/a9353121-7fed-fde7-6f40-939a65bfeefb@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the missing CPU topology/capacity information and the cpufreq nodes,
so we can have CPU frequency scaling and the scheduler has the
information it needs to make the correct decisions.
As with t8103, boost states are commented out pending PSCI/etc support
for deep sleep states.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Expand the cxl_test topology to include CFMWS's that use XOR math
for interleave arithmetic, as defined in the CXL Specification 3.0.
With this expanded topology, cxl_test is useful for testing:
x1,x2,x4 ways with XOR interleave arithmetic.
Define the additional XOR CFMWS entries to appear only with the
module parameter interleave_arithmetic=1. The cxl_test default
continues to be modulo math.
modprobe cxl_test interleave_arithmetic=1
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/54670400cd48ba7fcc6d8ee0d6ae2276d3f51aad.1669847017.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add the `Opaque` type, which is meant to be used with FFI objects
that are never interpreted by Rust code, e.g.:
struct Waiter {
completion: Opaque<bindings::completion>,
next: *mut Waiter,
}
It has the advantage that the objects don't have to be
zero-initialised before calling their init functions, making
the code performance closer to C.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduce the new `types` module of the `kernel` crate with
`Either` as its first type.
`Either<L, R>` is a sum type that always holds either a value
of type `L` (`Left` variant) or `R` (`Right` variant).
For instance:
struct Executor {
queue: Either<BoxedQueue, &'static Queue>,
}
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
