Add the `build_error!` and `build_assert!` macros which leverage
the previously introduced `build_error` crate. Do so in a new
module, called `build_assert`.
The former fails the build if the code path calling it can possibly
be executed. The latter asserts that a boolean expression is `true`
at compile time.
In particular, `build_assert!` can be used in some contexts where
`static_assert!` cannot:
fn f1<const N: usize>() {
static_assert!(N > 1);` // Error.
build_assert!(N > 1); // Build-time check.
assert!(N > 1); // Run-time check.
}
#[inline]
fn f2(n: usize) {
static_assert!(n > 1); // Error.
build_assert!(n > 1); // Build-time check.
assert!(n > 1); // Run-time check.
}
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `build_error` crate provides a function `build_error` which
will panic at compile-time if executed in const context and,
by default, will cause a build error if not executed at compile
time and the optimizer does not optimise away the call.
The `CONFIG_RUST_BUILD_ASSERT_ALLOW` kernel option allows to
relax the default build failure and convert it to a runtime
check. If the runtime check fails, `panic!` will be called.
Its functionality will be exposed to users as a couple macros in
the `kernel` crate in the following patch, thus some documentation
here refers to them for simplicity.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `static_assert!` macro, which is a compile-time assert, similar
to the C11 `_Static_assert` and C++11 `static_assert` declarations [1,2].
Do so in a new module, called `static_assert`.
For instance:
static_assert!(42 > 24);
static_assert!(core::mem::size_of::<u8>() == 1);
const X: &[u8] = b"bar";
static_assert!(X[1] == b'a');
const fn f(x: i32) -> i32 {
x + 2
}
static_assert!(f(40) == 42);
Link: https://en.cppreference.com/w/c/language/_Static_assert [1]
Link: https://en.cppreference.com/w/cpp/language/static_assert [2]
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust standard library has a really handy macro, `dbg!` [1,2].
It prints the source location (filename and line) along with the raw
source code that is invoked with and the `Debug` representation
of the given expression, e.g.:
let a = 2;
let b = dbg!(a * 2) + 1;
// ^-- prints: [src/main.rs:2] a * 2 = 4
assert_eq!(b, 5);
Port the macro over to the `kernel` crate inside a new module
called `std_vendor`, using `pr_info!` instead of `eprintln!` and
make the rules about committing uses of `dbg!` into version control
more concrete (i.e. tailored for the kernel).
Since the source code for the macro is taken from the standard
library source (with only minor adjustments), the new file is
licensed under `Apache 2.0 OR MIT`, just like the original [3,4].
Link: https://doc.rust-lang.org/std/macro.dbg.html [1]
Link: https://github.com/rust-lang/rust/blob/master/library/std/src/macros.rs#L212 [2]
Link: https://github.com/rust-lang/rust/blob/master/library/std/Cargo.toml [3]
Link: https://github.com/rust-lang/rust/blob/master/COPYRIGHT [4]
Signed-off-by: Niklas Mohrin <dev@niklasmohrin.de>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `fmt!` macro, which is a convenience alias for the Rust
`core::format_args!` macro.
For instance, it may be used to create a `CString`:
CString::try_from_fmt(fmt!("{}{}", "abc", 42))?
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `CString` type, which is an owned string that is guaranteed
to have exactly one `NUL` byte at the end, i.e. the owned equivalent
to `CStr` introduced earlier.
It is used for interoperability with kernel APIs that take C strings.
In order to do so, implement the `RawFormatter::new()` constructor
and the `RawFormatter::bytes_written()` method as well.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `Formatter` type, which leverages `RawFormatter`,
but fails if callers attempt to write more than will fit
in the buffer.
In order to so, implement the `RawFormatter::from_buffer()`
constructor as well.
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add `c_str!`, which is a convenience macro that creates a new `CStr`
from a string literal.
It is designed to be similar to a `str` in usage, and it is usable
in const contexts, for instance:
const X: &CStr = c_str!("Example");
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add unit tests for `CStr::from_bytes_with_nul()` and
`CStr::from_bytes_with_nul_unchecked()`.
These serve as an example of the first unit tests for Rust code
(i.e. different from documentation tests).
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `Debug`, `Display`, `Deref` (into `BStr`), `AsRef<BStr>`
and a set of `Index<...>` traits.
This makes it `CStr` more convenient to use (and closer to `str`).
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Morgan Bartlett <mjmouse9999@gmail.com>
Signed-off-by: Morgan Bartlett <mjmouse9999@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `CStr` type, which is a borrowed string that is guaranteed
to have exactly one `NUL` byte, which is at the end.
It is used for interoperability with kernel APIs that take C strings.
Add it to the prelude too.
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `b_str!` macro, which creates a new `BStr` from
a string literal.
It is usable in const contexts, for instance:
const X: &BStr = b_str!("Example");
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `BStr` type, which is a byte string without UTF-8
validity guarantee.
It is simply an alias to `[u8]`, but has a more evident
semantical meaning.
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add `Vec::try_with_capacity()` and `Vec::try_with_capacity_in()` as
the fallible versions of `Vec::with_capacity()` and
`Vec::with_capacity_in()`, respectively.
The implementations follow the originals and use the previously
added `RawVec::try_with_capacity_in()`.
In turn, `Vec::try_with_capacity()` will be used to implement
the `CString` type (which wraps a `Vec<u8>`) in a later patch.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `RawVec::try_with_capacity_in()` constructor as the fallible
version of `RawVec::with_capacity_in()`.
The implementation follows the original.
The infallible constructor is implemented in terms of the private
`RawVec::allocate_in()` constructor, thus also add the private
`RawVec::try_allocate_in()` constructor following the other.
It will be used to implement `Vec::try_with_capacity{,_in}()` in
the next patch.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is convenient to have all the `Error` constant items (such as
`EINVAL`) available as-is everywhere (i.e. for code using the kernel
prelude such as kernel modules).
Therefore, add all of them to the prelude.
For instance, this allows to write `Err(EINVAL)` to create
a kernel `Result`:
fn f() -> Result<...> {
...
Err(EINVAL)
}
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a set of `From` implementations for the `Error` kernel type.
These implementations allow to easily convert from standard Rust
error types to the usual kernel errors based on one of the `E*`
integer codes.
On top of that, the question mark Rust operator (`?`) implicitly
performs a conversion on the error value using the `From` trait
when propagating. Thus it is extra convenient to use.
For instance, a kernel function that needs to convert a `i64` into
a `i32` and to bubble up the error as a kernel error may write:
fn f(x: i64) -> Result<...> {
...
let y = i32::try_from(x)?;
...
}
which will transform the `TryFromIntError` into an `Err(EINVAL)`.
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Nándor István Krácser <bonifaido@gmail.com>
Signed-off-by: Nándor István Krácser <bonifaido@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Only a few codes were added so far. With the `declare_err!`
macro in place, add the remaining ones (which is most of them)
from `include/uapi/asm-generic/errno-base.h`.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Viktor Garske <viktor@v-gar.de>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a macro to declare errors, which simplifies the work needed to
add each one, avoids repetition of the code and makes it easier to
change the way they are declared.
Signed-off-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Instead of taking binary string literals, take string ones instead,
making it easier for users to define a module, i.e. instead of
calling `module!` like:
module! {
...
name: b"rust_minimal",
...
}
now it is called as:
module! {
...
name: "rust_minimal",
...
}
Module names, aliases and license strings are restricted to
ASCII only. However, the author and the description allows UTF-8.
For simplicity (avoid parsing), escape sequences and raw string
literals are not yet handled.
Link: https://github.com/Rust-for-Linux/linux/issues/252
Link: https://lore.kernel.org/lkml/YukvvPOOu8uZl7+n@yadro.com/
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This procedural macro attribute provides a simple way to declare
a trait with a set of operations that later users can partially
implement, providing compile-time `HAS_*` boolean associated
constants that indicate whether a particular operation was overridden.
This is useful as the Rust counterpart to structs like
`file_operations` where some pointers may be `NULL`, indicating
an operation is not provided.
For instance:
#[vtable]
trait Operations {
fn read(...) -> Result<usize> {
Err(EINVAL)
}
fn write(...) -> Result<usize> {
Err(EINVAL)
}
}
#[vtable]
impl Operations for S {
fn read(...) -> Result<usize> {
...
}
}
assert_eq!(<S as Operations>::HAS_READ, true);
assert_eq!(<S as Operations>::HAS_WRITE, false);
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro provides similar functionality to the unstable feature
`concat_idents` without having to rely on it.
For instance:
let x_1 = 42;
let x_2 = concat_idents!(x, _1);
assert!(x_1 == x_2);
It has different behavior with respect to macro hygiene. Unlike
the unstable `concat_idents!` macro, it allows, for example,
referring to local variables by taking the span of the second
macro as span for the output identifier.
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When the CFMWS is using XOR math, parse the corresponding
CXIMS structure and store the xormaps in the root decoder
structure. Use the xormaps in a new lookup, cxl_hb_xor(),
to find a targets entry in the host bridge interleave
target list.
Defined in CXL Specfication 3.0 Section: 9.17.1
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/5794813acdf7b67cfba3609c6aaff46932fa38d0.1669847017.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up:
f350c68e3c ("ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table")
...to build the new XOR interleave math support for the CXL Fixed Memory
Window Structures.
regression fix regarding bus recovery for the cadence driver, a DMA
handling fix for the imx driver, and two error path fixes (npcm7xx and
qcom-geni).
-----BEGIN PGP SIGNATURE-----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=WDqW
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A power state fix in the core for ACPI devices, a regression fix
regarding bus recovery for the cadence driver, a DMA handling fix for
the imx driver, and two error path fixes (npcm7xx and qcom-geni)"
* tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
i2c: cadence: Fix regression with bus recovery
i2c: Restore initial power state if probe fails
i2c: npcm7xx: Fix error handling in npcm_i2c_init()
Heiner Kallweit says:
====================
net: add and use netdev_sw_irq_coalesce_default_on()
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
Meanwhile we have sysfs attributes for controlling kind of
"software interrupt coalescing" on the GRO level. However most distros
and users don't know about it. So lets set a conservative default for
both involved parameters. Users can still override the defaults via
sysfs. Don't enable these settings on the fast ethernet chip versions,
they are slow enough.
Even with these conservative setting interrupt load on my 1Gbps test
system reduced significantly.
Follow Jakub's suggestion and put this functionality into net core
so that other MAC drivers can reuse it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
So let's use software interrupt coalescing instead and enable it
using new function netdev_sw_irq_coalesce_default_on().
Even with these conservative settings interrupt load on my 1Gbps test
system reduced significantly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper for drivers wanting to set SW IRQ coalescing
by default. The related sysfs attributes can be used to
override the default values.
Follow Jakub's suggestion and put this functionality into
net core so that drivers wanting to use software interrupt
coalescing per default don't have to open-code it.
Note that this function needs to be called before the
netdevice is registered.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix duplicate overlapping device-dax instances for HMAT described
"Soft Reserved" Memory
- Fix missing node targets in the sysfs representation of memory tiers
- Remove a confusing variable initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY4q2jAAKCRDfioYZHlFs
Z1P/AQCbMguw+Nj0oTj64TxvrJ6JjFbmJXI8YTFuSt7yOK4XLgD+OlH4SmZyQ1rH
HSY2kAl1mPKiqdoO0tKwcNtYYrOZtQQ=
=4hxx
-----END PGP SIGNATURE-----
Merge tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A few bug fixes around the handling of "Soft Reserved" memory and
memory tiering information.
Linux is starting to enounter more real world systems that deploy an
ACPI HMAT to describe different performance classes of memory, as well
the "special purpose" (Linux "Soft Reserved") designation from EFI.
These fixes result from that testing.
It has all appeared in -next for a while with no known issues.
- Fix duplicate overlapping device-dax instances for HMAT described
"Soft Reserved" Memory
- Fix missing node targets in the sysfs representation of memory
tiers
- Remove a confusing variable initialization"
* tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Fix duplicate 'hmem' device registration
ACPI: HMAT: Fix initiator registration for single-initiator systems
ACPI: HMAT: remove unnecessary variable initialization
Add AER error handler callback to read the RAS capability structure
correctable error (CE) status register for the CXL device. Log the
error as a trace event and clear the error. For CXL devices, the driver
also needs to write back to the status register to clear the
unmasked correctable errors.
See CXL spec rev3.0 8.2.4.16 for RAS capability structure CE Status
Register.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166985287203.2871899.13605149073500556137.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some new devices such as CXL devices may want to record additional error
information on a corrected error. Add a callback to allow the PCI device
driver to do additional logging such as providing additional stats for user
space RAS monitoring.
For CXL device, this is actually a need due to CXL needing to write to the
CXL RAS capability structure correctable error status register in order to
clear the unmasked correctable errors. See CXL spec rev3.0 8.2.4.16.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166984619233.2804404.3966368388544312674.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add nominal error handling that tears down CXL.mem in response to error
notifications that imply a device reset. Given some CXL.mem may be
operating as System RAM, there is a high likelihood that these error
events are fatal. However, if the system survives the notification the
expectation is that the driver behavior is equivalent to a hot-unplug
and re-plug of an endpoint.
Note that this does not change the mask values from the default. That
awaits CXL _OSC support to determine whether platform firmware is in
control of the mask registers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974413966.1608150.15522782911404473932.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add tracepoint events for recording the CXL uncorrectable and correctable
errors. For uncorrectable errors, there is additional data of 512B from
the header log register (CXL spec rev3 8.2.4.16.7). The trace event will
intake a dynamic array that will dump the entire Header Log data. If
multiple errors are set in the status register, then the
'first error' field (CXL spec rev3 v8.2.4.16.6) is read from the Error
Capabilities and Control Register in order to determine the error.
This implementation does not include CXL IDE Error details.
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166974413388.1608150.5875712482260436188.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The RAS Capability Structure has some ancillary information that may be
relevant with respect to AER events, link and protcol error status
registers. Map the RAS Capability Registers in support of defining a
'struct pci_error_handlers' instance for the cxl_pci driver.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412803.1608150.7096566580400947001.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The RAS Capabilitiy Structure is a CXL Component register capability
block. Unlike the HDM Decoder Capability, it will be referenced by the
cxl_pci driver in response to PCIe AER events. Due to this it is no
longer the case that cxl_map_component_regs() can assume that it should
map all component registers. Plumb a bitmask of capability ids to map
through cxl_map_component_regs().
For symmetry cxl_probe_device_regs() is updated to populate @id in
'struct cxl_reg_map' even though cxl_map_device_regs() does not have a
need to map a subset of the device registers per caller.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412214.1608150.11487843455070795378.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Update the port driver to use cxl_map_component_registers() so that the
component register block can be shared between the cxl_pci driver and
the cxl_port driver. I.e. stop the port driver from reserving the entire
component register block for itself via request_region() when it only
needs the HDM Decoder Capability subset.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974411625.1608150.7149373371599960307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The component registers are currently unused by the cxl_pci driver.
Only the physical address base of the component registers is conveyed to
the cxl_mem driver. Just call cxl_map_device_registers() directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974410443.1608150.15855499736133349600.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Rather then duplicating the setting of valid, length, and offset for
each type, just convey a pointer to the register map to common code.
Yes, the change in cxl_probe_component_regs() does not save
any lines of code, but it is preparation for adding another component
register type to map (RAS Capability Structure).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974409293.1608150.17661353937678581423.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed. If it is needed for new block drivers in the future, it
can be brought back.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
collect_cpu_info() is used to collect the current microcode revision and
processor flags on every CPU.
It had a weird mechanism to try to mimick a "once" functionality in the
sense that, that information should be issued only when it is differing
from the previous CPU.
However (1):
the new calling sequence started doing that in parallel:
microcode_init()
|-> schedule_on_each_cpu(setup_online_cpu)
|-> collect_cpu_info()
resulting in multiple redundant prints:
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
However (2):
dumping this here is not that important because the kernel does not
support mixed silicon steppings microcode. Finally!
Besides, there is already a pr_info() in microcode_reload_late() that
shows both the old and new revisions.
What is more, the CPU signature (sig=0x50654) and Processor Flags
(pf=0x80) above aren't that useful to the end user, they are available
via /proc/cpuinfo and they don't change anyway.
Remove the redundant pr_info().
[ bp: Heavily massage. ]
Fixes: b6f86689d5 ("x86/microcode: Rip out the subsys interface gunk")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221103175901.164783-2-ashok.raj@intel.com
The current links of LoongArch ISA Vol1 and ELF psABI are invalid,
the latest versions are 1.02 and 2.00 respectively, let us update
the links.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669892345-7763-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current links of LoongArch ISA Vol1 and ELF psABI are invalid,
the latest versions are 1.02 and 2.00 respectively, let us update
the links.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669892345-7763-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document the test_num member of struct ifs_data.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/lkml/774fd22a-aaee-758d-8195-77bac783ecbc@infradead.org/
Detailed description for this pull request:
- Replace irqchip mask_invert with unmask_base
to remove deprecated mask_invert flag for extcon-max77843.c
- Convert to i2c's .probe_new style for extcon-fsa9480,
extcon-rt8973 and extcon-usbc-uusb320.c
-----BEGIN PGP SIGNATURE-----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=Uxxc
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.2
Detailed description for this pull request:
- Replace irqchip mask_invert with unmask_base
to remove deprecated mask_invert flag for extcon-max77843.c
- Convert to i2c's .probe_new style for extcon-fsa9480,
extcon-rt8973 and extcon-usbc-uusb320.c
* tag 'extcon-next-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
