Remove reload documentation and add current_batch documentation.
Update the kernel version and date for all the entries.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-16-jithu.joseph@intel.com
Initial implementation assumed a single IFS test image file with a
fixed name ff-mm-ss.scan. (where ff, mm, ss refers to family, model and
stepping of the core).
Subsequently, it became evident that supporting more than one test
image file is needed to provide more comprehensive test coverage. (Test
coverage in this scenario refers to testing more transistors in the core
to identify faults).
The other alternative of increasing the size of a single scan test image
file would not work as the upper bound is limited by the size of memory
area reserved by BIOS for loading IFS test image.
Introduce "current_batch" file which accepts a number. Writing a
number to the current_batch file would load the test image file by
name ff-mm-ss-<xy>.scan, where <xy> is the number written to the
"current_batch" file in hex. Range check of the input is done to verify
it not greater than 0xff.
For e.g if the scan test image comprises of 6 files, they would be named:
06-8f-06-01.scan
06-8f-06-02.scan
06-8f-06-03.scan
06-8f-06-04.scan
06-8f-06-05.scan
06-8f-06-06.scan
And writing 3 to current_batch would result in loading 06-8f-06-03.scan
above. The file can also be read to know the currently loaded file.
And testing a system looks like:
for each scan file
do
load the IFS test image file (write to the batch file)
for each core
do
test the core with this set of tests
done
done
Qualify few error messages with the test image file suffix to provide
better context.
[ bp: Massage commit message. Add link to the discussion. ]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221107225323.2733518-13-jithu.joseph@intel.com
Reload sysfs entry will be replaced by current_batch, drop it.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-14-jithu.joseph@intel.com
The data portion of a IFS test image file contains a metadata region
containing possibly multiple metadata structures in addition to test
data and hashes.
IFS Metadata layout
+----------------------+ 0
|META_TYPE_IFS (=1) |
+----------------------+
|meta_size |
+----------------------+
|test type |
+----------------------+
|fusa info |
+----------------------+
|total images |
+----------------------+
|current image# |
+----------------------+
|total chunks |
+----------------------+
|starting chunk |
+----------------------+
|size per chunk |
+----------------------+
|chunks per stride |
+----------------------+
|Reserved[54] |
+----------------------+ 256
| |
| Test Data/Chunks |
| |
+----------------------+ meta_size
| META_TYPE_END (=0) |
+----------------------+ meta_size + 4
| size of end (=8) |
+----------------------+ meta_size + 8
Introduce the layout of this meta_data structure and validate
the sanity of certain fields of the new image before loading.
Tweak references to IFS test image chunks to reflect the updated
layout of the test image.
[ bp: Massage commit message. ]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117230408.30331-1-jithu.joseph@intel.com
Existing implementation (broken) of IFS used a header format (for IFS
test images) which was very similar to microcode format, but didn’t
accommodate extended signatures. This meant same IFS test image had to
be duplicated for different steppings and the validation code in the
driver was only looking at the primary header parameters. Going forward,
IFS test image headers have been tweaked to become fully compatible with
the microcode format.
Newer IFS test image headers will use header version 2 in order to
distinguish it from microcode images and older IFS test images.
In light of the above, reuse struct microcode_header_intel directly in
the IFS driver and reuse microcode functions for validation and sanity
checking.
[ bp: Massage commit message. ]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117225039.30166-1-jithu.joseph@intel.com
Аdded a return value check for the function
mmu_notifier_register().
Return value of a function 'mmu_notifier_register'
called at iommu_v2.c:642 is not checked,
but it is usually checked for this function
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20221118104252.122809-1-arefev@swemel.ru
[joro: Fix commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
Fixes: daae2d25a4 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005c ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update map/unmap to the new multi-page interfaces, which is dead easy
since we just pass them through to io-pgtable anyway. Since these are
domain ops now, the domain is inherently valid (not to mention that
container_of() wouldn't return NULL anyway), so garbage-collect that
check in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/ad859ccc24720d72f8eafd03817c1fc11255ddc1.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API has a proper notion of multi-page mappings, clean
up the old pgsize_bitmap hack by implementing the new interfaces
instead. This time we'll get the return values for unmaps correct too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/9026464e8380b92d10d09103e215eb4306a5df7c.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API has a proper notion of multi-page mappings, clean
up the old pgsize_bitmap hack by implementing the new interfaces
instead. This also brings a slight simplification since we no longer
need to worry about rolling back partial mappings on failure.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/768e90ff0c2d61e4723049c1349d8bac58daa437.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
One of the existing reserved fields in the microcode header has been
allocated to indicate the size of metadata structures.
The location of metadata section within microcode header is as shown
below:
Microcode Blob Format
+----------------------+ Base
|Header Version |
+----------------------+
|Update revision |
+----------------------+
|Date DDMMYYYY |
+----------------------+
|Sig |
+----------------------+
|Checksum |
+----------------------+
|Loader Version |
+----------------------+
|Processor Flags |
+----------------------+
|Data Size |
+----------------------+
|Total Size |
+----------------------+
|Meta Size |
+----------------------+
|Reserved |
+----------------------+
|Reserved |
+----------------------+ Base+48
| |
| Microcode |
| Data |
| |
+----------------------+ Base+48+data_size-
| | meta_size
| Meta Data |
| structure(s) |
| |
+----------------------+ Base+48+data_size
| |
| Extended Signature |
| Table |
| |
+----------------------+ Base+total_size
Add an accessor function which will return a pointer to the start of a
specific meta_type being queried.
[ bp: Massage commit message. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-11-jithu.joseph@intel.com
Registering a SYSMMU platform driver might directly trigger initializing
IOMMU domains and performing the initial mappings. Also the IOMMU core
might use the IOMMU hardware once it has been registered with
iommu_device_register() function. Ensure that all driver resources are
allocated and initialized before the driver advertise its presence to the
platform bus and the IOMMU subsystem.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154407.26531-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I/O translation tables on s390 use 8 byte page table entries and tables
which are allocated lazily but only freed when the entire I/O
translation table is torn down. Also each IOVA can at any time only
translate to one physical address Furthermore I/O table accesses by the
IOMMU hardware are cache coherent. With a bit of care we can thus use
atomic updates to manipulate the translation table without having to use
a global lock at all. This is done analogous to the existing I/O
translation table handling code used on Intel and AMD x86 systems.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-6-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When invalidating existing table entries for unmap there is no need to
know the physical address beforehand so don't do an extra walk of the
IOMMU table to get it. Also when invalidating entries not finding an
entry indicates an invalid unmap and not a lack of memory we also don't
need to undo updates in this case. Implement this by splitting
s390_iommu_update_trans() in a variant for validating and one for
invalidating translations.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-5-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The s390_domain->devices list is only added to when new devices are
attached but is iterated through in read-only fashion for every mapping
operation as well as for I/O TLB flushes and thus in performance
critical code causing contention on the s390_domain->list_lock.
Fortunately such a read-mostly linked list is a standard use case for
RCU. This change closely follows the example fpr RCU protected list
given in Documentation/RCU/listRCU.rst.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-4-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently s390-iommu does an I/O TLB flush (RPCIT) for every update of
the I/O translation table explicitly. For one this is wasteful since
RPCIT can be skipped after a mapping operation if zdev->tlb_refresh is
unset. Moreover we can do a single RPCIT for a range of pages including
whne doing lazy unmapping.
Thankfully both of these optimizations can be achieved by implementing
the IOMMU operations common code provides for the different types of I/O
tlb flushes:
* flush_iotlb_all: Flushes the I/O TLB for the entire IOVA space
* iotlb_sync: Flushes the I/O TLB for a range of pages that can be
gathered up, for example to implement lazy unmapping.
* iotlb_sync_map: Flushes the I/O TLB after a mapping operation
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-3-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a zPCI device is in the error state while switching IOMMU domains
zpci_register_ioat() will fail and we would end up with the device not
attached to any domain. In this state since zdev->dma_table == NULL
a reset via zpci_hot_reset_device() would wrongfully re-initialize the
device for DMA API usage using zpci_dma_init_device(). As automatic
recovery is currently disabled while attached to an IOMMU domain this
only affects slot resets triggered through other means but will affect
automatic recovery once we switch to using dma-iommu.
Additionally with that switch common code expects attaching to the
default domain to always work so zpci_register_ioat() should only fail
if there is no chance to recover anyway, e.g. if the device has been
unplugged.
Improve the robustness of attach by specifically looking at the status
returned by zpci_mod_fc() to determine if the device is unavailable and
in this case simply ignore the error. Once the device is reset
zpci_hot_reset_device() will then correctly set the domain's DMA
translation tables.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-2-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We currently have 3 different ways that __iommu_probe_device() may be
called, but no real guarantee that multiple callers can't tread on each
other, especially once asynchronous driver probe gets involved. It would
likely have taken a fair bit of luck to hit this previously, but commit
57365a04c9 ("iommu: Move bus setup to IOMMU device registration") ups
the odds since now it's not just omap-iommu that may trigger multiple
bus_iommu_probe() calls in parallel if probing asynchronously.
Add a lock to ensure we can't try to double-probe a device, and also
close some possible race windows to make sure we're truly robust against
trying to double-initialise a group via two different member devices.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Link: https://lore.kernel.org/r/1946ef9f774851732eed78760a78ec40dbc6d178.1667591503.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Follow the modern style and rename most 'dev_priv' variables
to 'i915'.
intel_dvo_init_dev() is the sole exception since it needs the
magic 'dev_priv' variable for the DPLL register macros.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118105525.27254-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Until now the port ID was always encoded as a 5-bit data. On MT8365,
the port ID is encoded as a 6-bit data. This requires to add extra
macro F_MMU_INT_ID_LARB_ID_EXT, and F_MMU_INT_ID_PORT_ID_EXT in order
to support 6-bit encoded port IDs.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221001-iommu-support-v6-2-be4fe8da254b@baylibre.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The loop over intel_dvo_devices[] makes intel_dvo_init()
an ugly mess. Pull the i2c device probe out to a separate
function so that we can get rid of the loop and flatten
the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118105525.27254-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
platform_get_resource() may return NULL pointer, we need check its
return value to avoid null-ptr-deref in resource_size().
Fixes: 42d57fc58a ("iommu/mediatek: Initialise/Remove for multi bank dev")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221029103550.3774365-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_dvo.panel_wants_dither is only set but never used.
We can't do dithering on the gmch side anyway since the
dithering logic is part of the integrated LVDS port and
not available for other output types.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118105525.27254-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently, these options cause the following libkmod error:
libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \
Ignoring bad option on kernel command line while parsing module \
name: 'ivrs_xxxx[XX:XX'
Fix by introducing a new parameter format for these options and
throw a warning for the deprecated format.
Users are still allowed to omit the PCI Segment if zero.
Adding a Link: to the reason why we're modding the syntax parsing
in the driver and not in libkmod.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-modules/20200310082308.14318-2-lucas.demarchi@intel.com/
Reported-by: Kim Phillips <kim.phillips@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20220919155638.391481-2-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The second (UID) strcmp in acpi_dev_hid_uid_match considers
"0" and "00" different, which can prevent device registration.
Have the AMD IOMMU driver's ivrs_acpihid parsing code remove
any leading zeroes to make the UID strcmp succeed. Now users
can safely specify "AMDxxxxx:00" or "AMDxxxxx:0" and expect
the same behaviour.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220919155638.391481-1-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a system with a single initiator node, and one or more memory-only
'target' nodes, the memory-only node(s) would fail to register their
initiator node correctly. i.e. in sysfs:
# ls /sys/devices/system/node/node0/access0/targets/
node0
Where as the correct behavior should be:
# ls /sys/devices/system/node/node0/access0/targets/
node0 node1
This happened because hmat_register_target_initiators() uses list_sort()
to sort the initiator list, but the sort comparision function
(initiator_cmp()) is overloaded to also set the node mask's bits.
In a system with a single initiator, the list is singular, and list_sort
elides the comparision helper call. Thus the node mask never gets set,
and the subsequent search for the best initiator comes up empty.
Add a new helper to consume the sorted initiator list, and generate the
nodemask, decoupling it from the overloaded initiator_cmp() comparision
callback. This prevents the singular list corner case naturally, and
makes the code easier to follow as well.
Cc: <stable@vger.kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Piper <chris.d.piper@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-2-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In hmat_register_target_initiators(), the variable 'best' gets
initialized in the outer per-locality-type for loop. The initialization
just before setting up 'Access 1' targets was unnecessary. Remove it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-1-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If O_EXCL is *not* specified, then linkat() can be
used to link the temporary file into the filesystem.
If O_EXCL is specified then linkat() should fail (-1).
After commit 863f144f12 ("vfs: open inside ->tmpfile()")
the O_EXCL flag is no longer honored by the vfs layer for
tmpfile, which means the file can be linked even if O_EXCL
flag is specified, which is a change in behaviour for
userspace!
The open flags was previously passed as a parameter, so it
was uneffected by the changes to file->f_flags caused by
finish_open(). This patch fixes the issue by storing
file->f_flags in a local variable so the O_EXCL test
logic is restored.
This regression was detected by Android CTS Bionic fcntl()
tests running on android-mainline [1].
[1] https://android.googlesource.com/platform/bionic/+/
refs/heads/master/tests/fcntl_test.cpp#352
Fixes: 863f144f12 ("vfs: open inside ->tmpfile()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
