A Coverity static code scan raised a potential overflow_before_widen
warning when hfi_features::nr_table_pages is used as an argument to
memcpy in intel_hfi_process_event().
Even though the overflow can never happen (the maximum number of pages of
the HFI table is 0x10 and 0x10 << PAGE_SHIFT = 0x10000), using size_t as
the data type of hfi_features::nr_table_pages makes Coverity happy and
matches the data type of the argument 'size' of memcpy().
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of 'goto and return', just return directly to
simplify the error handling, and avoid some unnecessary
return value check.
Link: https://lore.kernel.org/r/20221028075053.3990467-1-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mr->map_shift is set to ilog2(RXE_BUF_PER_MAP) in both rxe_mr_init() and
rxe_mr_alloc() so remove the duplicate one in rxe_mr_init().
Link: https://lore.kernel.org/r/1666855893-145-1-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The drv->state_count is assigned the total number of available states, so
let's make that clear.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While we correctly skips to initialize an idle state from a disabled idle
state node in DT, the returned value from dt_init_idle_driver() don't get
adjusted accordingly. Instead the number of found idle state nodes are
returned, while the callers are expecting the number of successfully
initialized idle states from DT.
This leads to cpuidle drivers unnecessarily continues to initialize their
idle state specific data. Moreover, in the case when all idle states have
been disabled in DT, we would end up registering a cpuidle driver, rather
than relying on the default arch specific idle call.
Fixes: 9f14da3455 ("drivers: cpuidle: implement DT based idle states infrastructure")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's useful to understand whether we are using OS-initiated (OSI) mode or
Platform Coordinated (PC) mode, when initializing the CPU PM domains.
Therefore, let's extend the print in the log after a successful probe with
this information.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Return an error pointer if ->get_max_state() fails. The current code
returns NULL which will cause an oops in the callers.
Fixes: c408b3d1d9 ("thermal: Validate new state in cur_state_store()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We should reject the requests with access flags that is not registered by
MR/MW. For example, lookup_mr() should return NULL when requested access
is 0x03 and mr->access is 0x01.
Link: https://lore.kernel.org/r/20220927055337.22630-2-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a secondary AT port using one of OEM reserved channel.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220916144329.243368-3-fabio.porcedda@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.
Cc: stable@vger.kernel.org # 5.19
Fixes: a6e2e3522f "bus: mhi: core: Add support for PM state transitions"
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665889532-13634-1-git-send-email-quic_qianyu@quicinc.com
[mani: CCed stable list]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, a direct register write is used when ramdump collection
in panic path occurs. Replace that with new mhi_soc_reset() API
such that a controller defined reset() function is exercised if
one is present and the regular SOC reset is done if it is not.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665376324-34258-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Variable count is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The return value of acpi_fetch_acpi_dev() could be NULL, which would
cause a NULL pointer dereference to occur in acpi_device_hid().
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
[ rjw: Subject and changelog edits, added empty line after if () ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmNSgrAACgkQxycdCkmx
i6e9lhAAk2pXbkjVx05aeeNY9hD8WhveNCuEgUEmuX3nn4/0u3gdRNMLlyADV+RN
kUEhFZsgxszB/65od378A/PA/fOHKzO8QlNzFgcaZbOm1TnzqxfG2q4CIBdm//mx
5MdogwSg5uLDzEiUFJb94cPv2YizuE2+Zer0goDesWAm7eXEf3PMb7WfLjqdWiM/
rHnfE74l/cro8RIH7wTgCCNDIuIAI3wOrXULohhhJbzbQ89prOKgy1h5mL/b8N4x
4MVXd5tTPL2se5JqgofLuddGIB+B7fNCHRyWDO35cI+xh5o9G0K2DslYW6azKWyZ
LJc86UGSV6I7kNSSyyfMDH6N0u1eXjvQiTaOZubO7ql38Ob6hRuCE2UG8lZlWVfQ
2j71+QzhF0wrQxIBrQmlvdOKZiL4NsBxz9lr27tj8gdJlPWbgsLFssBQGB921uSA
0M4vKDQoK95M+TsoJjWYNHcGb+Uu6iFOgOrzCND/0hd73rRi1TSTtc3Q4SnAUthz
eCyBVXtuI1k3VCWoelUKOSoh1jILaAjKcXz+5dpIBZgtbm17f55eAW3L6xmOGl/u
/VbHpFDPai8A1gbk3gzUac+KWe96+A2jM/j8R/wWikhrLMhtAvToT2cDrAg9v9wk
UpuSflSSOQcL9CBv4eJzJEdX/49qqjY4jeJ+i/V5PZzC3QSYWX8=
=0tfg
-----END PGP SIGNATURE-----
Merge tag 'v6.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/polyval"
* tag 'v6.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/polyval - Fix crashes when keys are not 16-byte aligned
Some documentation first, about how this machinery works:
It seems, the intent of the GHES error records cache is to collect
already reported errors - see the ghes_estatus_cached() checks. There's
even a sentence trying to say what this does:
/*
* GHES error status reporting throttle, to report more kinds of
* errors, instead of just most frequently occurred errors.
*/
New elements are added to the cache this way:
if (!ghes_estatus_cached(estatus)) {
if (ghes_print_estatus(NULL, ghes->generic, estatus))
ghes_estatus_cache_add(ghes->generic, estatus);
The intent being, once this new error record is reported, it gets cached
so that it doesn't get reported for a while due to too many, same-type
error records getting reported in burst-like scenarios. I.e., new,
unreported error types can have a higher chance of getting reported.
Now, the loop in ghes_estatus_cache_add() is trying to pick out the
oldest element in there. Meaning, something which got reported already
but a long while ago, i.e., a LRU-type scheme.
And the cmpxchg() is there presumably to make sure when that selected
element slot_cache is removed, it really *is* that element that gets
removed and not one which replaced it in the meantime.
Now, ghes_estatus_cache_add() selects a slot, and either succeeds in
replacing its contents with a pointer to a newly cached item, or it just
gives up and frees the new item again, without attempting to select
another slot even if one might be available.
Since only inserting new items is being done here, the race can only
cause a failure if the selected slot was updated with another new item
concurrently, which means that it is arbitrary which of those two items
gets dropped.
And "dropped" here means, the item doesn't get added to the cache so
the next time it is seen, it'll get reported again and an insertion
attempt will be done again. Eventually, it'll get inserted and all those
times when the insertion fails, the item will get reported although the
cache is supposed to prevent that and "ratelimit" those repeated error
records. Not a big deal in any case.
This means the cmpxchg() and the special case are not necessary.
Therefore, just drop the existing item unconditionally.
Move the xchg_release() and call_rcu() out of rcu_read_lock/unlock
section since there is no actually dereferencing the pointer at all.
[ bp:
- Flesh out and summarize what was discussed on the thread now
that that cache contraption is understood;
- Touch up code style. ]
Co-developed-by: Jia He <justin.he@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-7-justin.he@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The subroutine rxe_do_task() is only called in rxe_task.c. This patch
makes it static and renames it do_task().
Link: https://lore.kernel.org/r/20221021200118.2163-6-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).
Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The name field in struct rxe_task is never used. This patch removes it.
Link: https://lore.kernel.org/r/20221021200118.2163-4-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The calls to spin_lock_init() for the tasklet spinlocks in
rxe_qp_init_misc() are redundant since they are intiialized in
rxe_init_task(). This patch removes them.
Link: https://lore.kernel.org/r/20221021200118.2163-3-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stan is moving out of mm-sol and decided not to carry on the maintainership
duties of the Qcom PCIe RC driver. Since I'm already maintaining the Qcom
PCIe EP driver, I'm volunteering myself to maintain the RC driver also.
Link: https://lore.kernel.org/r/20221028160029.44483-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Goal of the series is implementation of suspend/resume operations for a
PCM stream along with all the collaterals connected to the subject.
Start with splitting avs_dai_fe_hw_free() as ideally we would like to
reuse as much of existing code as possible but snd_pcm_lib_free_pages()
is not desired part of the function when speaking of suspend operation.
The actual implementation of suspend/resume() for component drivers
follows. For most scenarios, the PM flow is similar to standard
streaming one, except for the part where the position register are being
saved and the lack of PCM pages freeing. To reduce code duplication, all
avs_dai_suspend_XXX() and avs_dai_resume_XXX() functions reuse their
non-PM equivalents.
Order of operations is affected by the fact that path binding/unbinding
happens only in FE part of the stream.
Above essentially unlocks SX+streaming scenarios i.e.: power transitions
with an ongoing stream.
As some streams are allowed to run in low power state, support is
provided for S0iX state. The handlers check ACPI capabilities and the
number of active low-power paths before deciding between SX and S0iX
flows.
The last portion of the patchset is addition of power/clock gating
overrides. There is no single set of registers that ensures AudioDSP
firmware loads 100% of time on every single configuration. By having
them exposed, user can have the loading procedure behavior adjusted for
their configuration without having to recompile the kernel.
Since commit 0998d06310 ("device-core: Ensure drvdata = NULL when no
driver is bound") the driver core cares for cleaning driver data, so
don't do it in the driver, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following error messages are observed on boot for Tegra234 ...
ERR KERN tegra-qspi 3270000.spi: cannot use DMA: -19
ERR KERN tegra-qspi 3270000.spi: falling back to PIO
Tegra234 does not support DMA for the QSPI and so initialising the DMA
is expected to fail. The above error messages are misleading for devices
that don't support DMA and so fix this by skipping the DMA
initialisation for devices that don't support DMA.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221026155633.141792-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8a254d90a7 ("efi: efivars: Fix variable writes without
query_variable_store()") addressed an issue that was introduced during
the EFI variable store refactor, where alternative implementations of
the efivars layer that lacked query_variable_store() would no longer
work.
Unfortunately, there is another case to consider here, which was missed:
if the efivars layer is backed by the EFI runtime services as usual, but
the EFI implementation predates the introduction of QueryVariableInfo(),
we will return EFI_UNSUPPORTED, and this is no longer being dealt with
correctly.
So let's fix this, and while at it, clean up the code a bit, by merging
the check_var_size() routines as well as their callers.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Aditya Garg <gargaditya08@live.com>
AudioReach Modules can connect to other modules using source and
destination port, and each module in theory can support up to 255 port
connections. But in practice this limit is at max 8 ports at a time.
So add support for allowing multiple port connections.
This support is needed for more detailed graphs like ECNS, speaker
protection and so.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current AudioReach design of connecting FE and BE graph is very complicated
and not reliable. Instead used the virtual damp widgets private data to help
identify the modules that needs connection at runtime. Also maintain a
inter-graph connection info in the graph info, which can be used to both
determine if the graphs are connected and at graph build time.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update kcontrol private date to include more information like graph id
and module instance id which its connected to. Also maintain this virtual
dapm mixer widget in a list so that we could lookup while FE and BE connection
are added.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SubGraph and Module Instance ids take 32 bits, so use idr_alloc_u32
instead of idr_alloc to able to accommodate valid ranges.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_PM=N, pm_runtime_put_sync() returns -ENOSYS
which breaks the probe function of these drivers.
Other users of pm_runtime_put_sync() typically don't check
the return value. In order to keep the program flow as
intended, check for -ENOSYS.
This commit is similar to commit 0434d3f (omap-mailbox.c).
Fixes: cab04ab590 ("ASoC: fsl_asrc: Don't use devm_regmap_init_mmio_clk")
Fixes: 203773e393 ("ASoC: fsl_esai: Don't use devm_regmap_init_mmio_clk")
Fixes: 2277e7e36b ("ASoC: fsl_sai: Don't use devm_regmap_init_mmio_clk")
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20221028141129.100702-1-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a check for if create_singlethread_workqueue() fails and also destroy
the work queue on failure paths.
Fixes: e411e0587e ("RDMA/qedr: Add iWARP connection management functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Y1gBkDucQhhWj5YM@kili
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 1 PID: 379
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:destroy_workqueue+0x2f/0x740
RSP: 0018:ffff888016137df8 EFLAGS: 00000202
...
Call Trace:
ib_core_cleanup+0xa/0xa1 [ib_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa1a0d221b7
...
It is because the fail of roce_gid_mgmt_init() is ignored:
ib_core_init()
roce_gid_mgmt_init()
gid_cache_wq = alloc_ordered_workqueue # fail
...
ib_core_cleanup()
roce_gid_mgmt_cleanup()
destroy_workqueue(gid_cache_wq)
# destroy an unallocated wq
Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().
Fixes: 03db3a2d81 ("IB/core: Add RoCE GID table management")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221025024146.109137-1-chenzhongjin@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2d8dc0383d3c908389053afbdc329bbd52f009ce
The CXL 3.0 Specification [1] adds two new structures to
the CXL Early Discovery Table (CEDT). The CEDT may include
zero or more entries of these types:
CXIMS: CXL XOR Interleave Math Structure
Enables the host to find a targets position in an
Interleave Target List when XOR Math is used.
RDPAS: RCEC Downstream Post Association Structure
Enables the host to locate the Downstream Port(s)
that report errors to a given Root Complex Event
Collector (RCEC).
Link: https://www.computeexpresslink.org/spec-landing # [1]
Link: 2d8dc038
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8ac4e5116f59d6f9ba2fbeb9ce22ab58237a278f
Finish support for the CDAT table, in both the data table compiler and
the disassembler.
Link: 8ac4e511
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 91bef8bea9cd69c33447ba1bfe2c4273994500fd
Added an underscore instead of an (illegal) *
Link: 91bef8be
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 54b54732c5fc9e0384bcfd531f3c10d3a7b628b5
The latest IORT update makes one small addition to SMMUv3 nodes to
describe MSI support independently of wired GSIV support.
Link: 54b54732
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit fad527b6e76babc7527c41325bfbef6bd1a1132b
FFH(Fixed Function Hardware) Opregion is approved to be added in ACPI 6.5 via
code first approach [1]. It requires special context data similar to GPIO and
Generic Serial Bus as it needs to know platform specific offset and length.
Add support for the special context data needed by FFH Opregion.
FFH op_region enables advanced use of FFH on some architectures. For example,
it could be used to easily proxy AML code to architecture-specific behavior
(to ensure it is OS initiated)
Actual behavior of FFH is ofcourse architecture specific and depends on
the FFH bindings. The offset and length could have arch specific meaning
or usage.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3598 # [1]
Link: fad527b6
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2176a750230d5e81b4bedf24ef296da0cd0d7bb3
Link: 2176a750
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 10e4763f155eac0c60295a7e364b0316fc52c4f1
Link: 10e4763f
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a36eda9631e84f271319c41288889dd5b1329369
The ACPICA code assumes that EBDA region must be at least 1ki_b in size.
Because this is not guaranteed, it might happen that while scanning the
memory for RSDP pointer, the kernel touches memory above 640ki_b.
This is unwanted as the VGA memory range may not be decoded or
even present when running under virtualization.
Link: a36eda96
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cc9e7763ceb2e2649fe3422130416d84a3c6854a
If the memory at 0x40e is uninitialized, the retrieved physical_memory
address of EBDA may be beyond the low memory (i.e. above 640K).
If so, the kernel may unintentionally access the VGA memory, that
might not be decoded or even present in case of virtualization.
Link: cc9e7763
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 32d875705c8ee8f99fd8b78dbed48633486a7640
Some chipsets (such as Loongson's LS7A) support fixed pcie wake event
which is defined in the PM1 block(related description can be found in
4.8.4.1.1 PM1 Status Registers, 4.8.4.2.1 PM1 Control Registers and
5.2.9 Fixed ACPI Description Table (FADT)), so we add code to handle it.
Link: https://uefi.org/specifications/ACPI/6.4/
Link: 32d87570
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
