When booting with CONFIG_CFI_CLANG, there are numerous violations when
accessing the files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0:
$ cd /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0
$ grep . *
id:0
punit_req_freq_mhz:350
rc6_enable:1
rc6_residency_ms:214934
rps_act_freq_mhz:1300
rps_boost_freq_mhz:1300
rps_cur_freq_mhz:350
rps_max_freq_mhz:1300
rps_min_freq_mhz:350
rps_RP0_freq_mhz:1300
rps_RP1_freq_mhz:350
rps_RPn_freq_mhz:350
throttle_reason_pl1:0
throttle_reason_pl2:0
throttle_reason_pl4:0
throttle_reason_prochot:0
throttle_reason_ratl:0
throttle_reason_status:0
throttle_reason_thermal:0
throttle_reason_vr_tdc:0
throttle_reason_vr_thermalert:0
$ sudo dmesg &| grep "CFI failure at"
[ 214.595903] CFI failure at kobj_attr_show+0x19/0x30 (target: id_show+0x0/0x70 [i915]; expected type: 0xc527b809)
[ 214.596064] CFI failure at kobj_attr_show+0x19/0x30 (target: punit_req_freq_mhz_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596407] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_enable_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596528] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_residency_ms_show+0x0/0x270 [i915]; expected type: 0xc527b809)
[ 214.596682] CFI failure at kobj_attr_show+0x19/0x30 (target: act_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596792] CFI failure at kobj_attr_show+0x19/0x30 (target: boost_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596893] CFI failure at kobj_attr_show+0x19/0x30 (target: cur_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596996] CFI failure at kobj_attr_show+0x19/0x30 (target: max_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597099] CFI failure at kobj_attr_show+0x19/0x30 (target: min_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597198] CFI failure at kobj_attr_show+0x19/0x30 (target: RP0_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597301] CFI failure at kobj_attr_show+0x19/0x30 (target: RP1_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597405] CFI failure at kobj_attr_show+0x19/0x30 (target: RPn_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597538] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597701] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597836] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597952] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598071] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598177] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598307] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598439] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598542] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
The ultimate issue is that these sysfs functions are expecting to be
called via dev_attr_show() but they may also be called via
kobj_attr_show(), as certain files are created under two different
kobjects that have two different sysfs_ops in intel_gt_sysfs_register(),
hence the warnings above. When accessing the gt_ files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0, which are using the same
sysfs functions, there are no violations, meaning the functions are
being called with the proper type.
To make everything work properly, adjust certain functions to match the
type of the ->show() and ->store() members in 'struct kobj_attribute'.
Add a macro to generate functions for that can be called via both
dev_attr_{show,store}() or kobj_attr_{show,store}() so that they can be
called through both kobject locations without violating kCFI and adjust
the attribute groups to account for this.
Link: https://github.com/ClangBuiltLinux/linux/issues/1716
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013205909.1282545-1-nathan@kernel.org
It is possible for tw to lock the ring, and this was not propogated out to
io_run_local_work. This can cause an unlock to be missed.
Instead pass a pointer to locked into __io_run_local_work.
Fixes: 8ac5d85a89 ("io_uring: add local task_work run helper that is entered locked")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221027144429.3971400-3-dylany@meta.com
[axboe: WARN_ON() -> WARN_ON_ONCE() and add a minor comment]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit f73edc8951 ("kbuild: unify two modpost invocations") introduced
a typo (moudle.symvers-if-present) which results in the kernel's
Module.symvers to not be included as a prerequisite for
$(KBUILD_EXTMOD)/Module.symvers. Fix the typo to restore the intended
functionality.
Fixes: f73edc8951 ("kbuild: unify two modpost invocations")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The status of git will affect the final compilation result, add it to
the documentation of reproducible builds.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
AMD's MCA Thresholding feature counts errors of all severity levels, not
just correctable errors. If a deferred error causes the threshold limit
to be reached (it was the error that caused the overflow), then both a
deferred error interrupt and a thresholding interrupt will be triggered.
The order of the interrupts is not guaranteed. If the threshold
interrupt handler is executed first, then it will clear MCA_STATUS for
the error. It will not check or clear MCA_DESTAT which also holds a copy
of the deferred error. When the deferred error interrupt handler runs it
will not find an error in MCA_STATUS, but it will find the error in
MCA_DESTAT. This will cause two errors to be logged.
Check for deferred errors when handling a threshold interrupt. If a bank
contains a deferred error, then clear the bank's MCA_DESTAT register.
Define a new helper function to do the deferred error check and clearing
of MCA_DESTAT.
[ bp: Simplify, convert comment to passive voice. ]
Fixes: 37d43acfd7 ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220621155943.33623-1-yazen.ghannam@amd.com
No need to have the used_list - we don't need to keep track of the
used chunks, we only need to know the amount of used memory.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When ICM chunk is freed, it might still be accessed by HW until we do
sync with HW. This sync is expensive operation, so we don't do it often.
Instead, when the chunk is freed, it is moved to the buddy's "hot memory"
list. Once sync is done, we traverse the hot list and finally free all
the chunks.
It appears that traversing a long list takes unusually long time due to cache
misses on many entries, which causes a big "hiccup" during rule insertion.
This patch deals with this issue the following way:
- Move hot chunks list from buddy to pool, so that the pool will
keep track of all its hot memory.
- Replace the list with pre-allocated array on the memory pool struct,
and store only the information that is needed to later free this
chunk in its buddy allocator.
This cost additional memory for the array that is dynamically
allocated, but it allows not to save long list of hot chunks,
so at peak times it actually saves memory due to the fact that
each array entry is much smaller than the chunk struct.
This way an overhead of traversing the long list is virtually removed:
the loop of freeing hot chunks takes ~27 msec instead of ~70 msec, where
most of it are the actual freeing activities.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Instead of hiding the math in the code, define a value that sets the
fraction of allowed hot memory of ICM pool.
Set the threshold for sync of ICM hot chunks to 1/4 of the pool
instead of 1/2 of the pool. Although we will have more syncs, each
sync will be shorter and will help with insertion rate stability.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SW steering allocates/frees lots of htbl structs. Create a
separate kmem_cache and allocate htbls from this allocator.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SW steering allocates/frees lots of icm_chunk structs. To make this more
efficiently, create a separate kmem_cache and allocate these chunks from
this allocator.
By doing this we observe that the alloc/free "hiccups" frequency has
become much lower, which allows for a more steady rule insersion rate.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Instead of allocating/freeing send info objects dynamically, manage them
in pool. The number of send info objects doesn't depend on rules, so after
pre-populating the pool with an initial batch of send info objects, the
pool is not expected to grow.
This way we save alloc/free during writing STEs to ICM, which can
sometimes take up to 40msec.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't wait for the whole table to be ready - write each row immediately.
This way we save allocations of the ste_send_info structure and improve
performance.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Handle creation/destruction of all the domain's memory pools and other
memory-related fields in a separate init/uninit functions.
This simplifies error flow and allows cleaner addition of new pools.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rather than cleaning the corresponding chunk's section of ste_arrays on
chunk deletion, initialize these areas upon chunk creation.
Chunk destruction tend to come in large batches (during pool syncing).
To reduce the "hiccup" in such cases, moving ste_arrays init from chunk
destruction to initialization.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
While creating rule, ste_arr is an array that is allocated at the start
of the function and freed at the end.
This memory allocation can sometimes lead to "hiccups" of up to 10ms.
However, the common use case is short chains of STEs. For such cases,
we can use a local buffer on stack instead.
Changes in v2:
Use small local array for short rules, allocate dynamically for long rules
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove an argument that can be extracted in the function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Calling fast teardown as part of the normal unloading caused
a problem with SW steering - SW steering still needs to clear
its tables, write to ICM and poll for completions.
When teardown has been done, SW steering keeps polling the CQ
forever, because nobody flushes it.
This patch fixes the issue by checking the device state in
cases where no CQE was returned.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If sync happens when the device is in fast teardown, just bail
and don't do anything, because the PCI device is not there any more.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Otherwise resources will never be freed and refcount will not be decreased.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The function pfkey_send_acquire may race with pfkey_register
(which could even be in a different name space). This may result
in a buffer overrun.
Allocating the maximum amount of memory that could be used prevents
this.
Reported-by: syzbot+1e9af9185d8850e2c2fa@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT
driver essentially does exactly what mdio_bus_phy_resume() does by
calling phy_resume().
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221025234201.2549360-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- make the multipath dma alignment to match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
-----BEGIN PGP SIGNATURE-----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=Bb9K
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme into block-6.1
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- make the multipath dma alignment to match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)"
* tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme:
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
Instead of discovering the kmalloc bucket size _after_ allocation, round
up proactively so the allocation is explicitly made for the full size,
allowing the compiler to correctly reason about the resulting size of
the buffer through the existing __alloc_size() hint.
This will allow for kernels built with CONFIG_UBSAN_BOUNDS or the
coming dynamic bounds checking under CONFIG_FORTIFY_SOURCE to gain
back the __alloc_size() hints that were temporarily reverted in commit
93dd04ab0b ("slab: remove __alloc_size attribute from __kmalloc_track_caller")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221021234713.you.031-kees@kernel.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221025223811.up.360-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[devm_]gpiod_get_from_of_node in drivers usage should be limited
so that gpiolib can be cleaned up; let's switch to the generic device
property API.
It may even help with handling secondary fwnodes when gpiolib is taught
to handle gpios described by swnodes.
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-1-b29adfb27a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
dm-rq implements ->end_io callback for request issued to underlying queue,
and it isn't passthrough request.
Commit ab3e1d3bba ("block: allow end_io based requests in the completion
batch handling") doesn't clear rq->bio and rq->__data_len for request
with ->end_io in blk_mq_end_request_batch(), and this way is actually
dangerous, but so far it is only for nvme passthrough request.
dm-rq needs to clean up remained bios in case of partial completion,
and req->bio is required, then use-after-free is triggered, so the
underlying clone request can't be completed in blk_mq_end_request_batch.
Fix panic by not adding such request into batch list, and the issue
can be triggered simply by exposing nvme pci to dm-mpath simply.
Fixes: ab3e1d3bba ("block: allow end_io based requests in the completion batch handling")
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@kernel.org>
Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221027085709.513175-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If device_register() returns error in rbd_sysfs_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Fault injection test can trigger this problem:
unreferenced object 0xffff88810173aa78 (size 8):
comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s)
hex dump (first 8 bytes):
72 62 64 00 81 88 ff ff rbd.....
backtrace:
[<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0
[<00000000bdd44fe7>] kstrdup+0x3a/0x70
[<00000000f7844d0b>] kstrdup_const+0x63/0x80
[<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190
[<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150
[<00000000d5edbf18>] dev_set_name+0xab/0xe0
[<00000000f5153e80>] device_add+0x106/0x1f20
Fixes: dfc5606dc5 ("rbd: replace the rbd sysfs interface")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20221027091918.2294132-1-yangyingliang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since there is no release callback defined for the PCI EPC device,
the below warning is thrown by driver core when a PCI endpoint driver is
removed:
Device 'e65d0000.pcie-ep' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.
WARNING: CPU: 0 PID: 139 at drivers/base/core.c:2232 device_release+0x78/0x8c
Hence, add the release callback and also move the kfree(epc) from
pci_epc_destroy() so that the epc memory is freed when all references are
dropped.
Link: https://lore.kernel.org/r/20220623003817.298173-1-yoshihiro.shimoda.uh@renesas.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Dual mode DesignWare PCIe IP has PTM capability enabled (if supported) even
in the EP mode. The PCIe compliance for the EP mode expects PTM
capabilities (ROOT_CAPABLE, RES_CAPABLE, CLK_GRAN) be disabled.
Hence disable PTM for the EP mode.
Link: https://lore.kernel.org/r/20220919143340.4527-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Nothing in the kernel uses the platform data code path.
Drop it, and drop the use of the old legacy <linux/gpio.h>
API in the process.
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The driver includes the legacy <linux/gpio.h> header but does
not use any symbols from it. Drop the include.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The driver was including legacy headers despite using just
<linux/gpio/consumer.h>. Drop the surplus includes.
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
1st) parallel-in -> mipi-csi out
2nd) mipi-csi in -> parallel out
This patch only adds the support for the 1st mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
`pm_runtime_get_sync` may return 1 on success. Fix the `if` statement
here to make the code less confusing, even though additional calls to
`it6505_poweron` doesn't break anything when it's already powered.
This was reported by Dan Carpenter <dan.carpenter@oracle.com> in
https://lore.kernel.org/all/Y1fMCs6VnxbDcB41@kili/
Fixes: 10517777d3 ("drm/bridge: it6505: Adapt runtime power management framework")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027032149.2739912-1-treapking@chromium.org
Alex Elder says:
====================
net: ipa: don't use fixed table sizes
Currently, routing and filter tables are assumed to have a fixed
size for all platforms. In fact, these tables can support many more
entries than what has been assumed; the only limitation is the size
of the IPA-resident memory regions that contain them.
This series rearranges things so that the size of the table is
determined from the memory region size defined in configuration
data, rather than assuming it is fixed.
This will required for IPA versions 5.0+, where the number of
entries in a routing table is larger.
====================
Link: https://lore.kernel.org/r/20221025195143.255934-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently we assume that any filter table contains a fixed number
of entries. Like routing tables, the number of entries in a filter
table is limited only by the size of the IPA-local memory region
used to hold the table.
Stop assuming that a filter table has exactly 14 entries. Instead,
determine the number of entries in a routing table by dividing its
memory region size by the size of an entry. (Note that the first
"entry" in a filter table contains an endpoint bitmap.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently all platforms are assumed allot 8 routing table entries
for use by the modem. Instead, add a new configuration data entry
that defines the number of modem routing table entries, and record
that in the IPA structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently we assume that any routing table contains a fixed number
of entries. The number of entries in a routing table can actually
vary, depending only on the size of the IPA-local memory region used
to hold the table.
Stop assuming that a routing table has exactly 15 entries. Instead,
determine the number of entries in a routing table by dividing its
memory region size by the size of an entry.
The number of entries is computed early, when ipa_table_mem_valid()
is called by ipa_table_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The non-hashed routing tables for IPv4 and IPv6 will be the same
size. And if supported, the hashed routing tables will be the same
size as the non-hashed tables.
Record the size (number of entries) of all routing tables in the IPA
structure. For now, initialize this field using IPA_ROUTE_TABLE_MAX,
and just do so when the first route table is validated.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the bindings for the Toshiba TC358746 Parallel <-> MIPI-CSI bridge
driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
For MIPI-CSI sender use-case it is common to specify the allowed
link-frequencies which should be used for the MIPI link and is
half the hs-clock rate.
This commit adds a helper to calculate the D-PHY timing based on the
hs-clock rate so we don't need to calculate the timings within the
driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Factor out the calculation into phy_mipi_dphy_calc_config(). This is
needed for the follow up patch which adds the support to calculate the
timings based on a given hs clock. No functional changes are done.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Complain in the newly added s_stream video op wrapper if disabling
streaming failed. Also return zero in this case as there's nothing the
caller can do to return the error.
This way drivers also won't need to bother with printing error messages.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
