When bt_en is pulled high by hardware, the host does not re-download
the firmware after SSR. The controller loads the rampatch and NVM
internally.
On HMT chip, the rampatch is ~264 KB and the NVM is ~9.4 KB. The
loading process takes approximately 70 ms. The previous 50 ms delay is
too short, causing the controller to not respond to the reset command
sent by the host, which leads to BT initialization failure:
Bluetooth: hci0: QCA memdump Done, received 458752, total 458752
Bluetooth: hci0: mem_dump_status: 2
Bluetooth: hci0: Opcode 0x0c03 failed: -110
Increase the delay to 100 ms, which was confirmed as a safe value by
the controller, to ensure the controller has finished loading the
firmware before the host sends commands.
Steps to reproduce:
1. Trigger SSR and wait for SSR to complete:
hcitool cmd 0x3f 0c 26
2. Run "bluetoothctl power on" and observe that BT fails to start.
Fixes: fce1a9244a ("Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs).
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Cc: stable@vger.kernel.org
Reported-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails.
Fixes: 18722c2470 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth host decides whether to download firmware by reading the
controller firmware download completion flag and firmware version
information.
If a USB error occurs during the firmware download process (for example
due to a USB disconnect), the download is aborted immediately. An
incomplete firmware transfer does not cause the controller to set the
download completion flag, but the firmware version information may be
updated at an early stage of the download process.
In this case, after USB reconnection, the host attempts to re-download
the firmware because the download completion flag is not set. However,
since the controller reports the same firmware version as the target
firmware, the download is skipped. This ultimately results in the
firmware not being properly updated on the controller.
This change removes the restriction that skips firmware download when
the versions are equal. It covers scenarios where the USB connection
can be disconnected at any time and ensures that firmware download can
be retriggered after USB reconnection, allowing the Bluetooth firmware
to be correctly and completely updated.
Fixes: 3267c884ce ("Bluetooth: btusb: Add support for QCA ROME chipset family")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared.
Fixes: 3df91ea20e ("Bluetooth: Revert to mutexes from RCU list")
Cc: <stable@vger.kernel.org> # 0b58004: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return.
Fixes: adf0398cee ("Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but
returns 0 without freeing it when neither pa_sync_term nor big_sync_term
flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was
refactored to take struct hci_conn instead of raw u8 parameters, adding
PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue
failure does not cover this path.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
scx_show_state.py still reads scx_aborting and scx_bypass_depth as
global symbols. Those symbols no longer exist after the state was moved
into struct scx_sched, so the drgn script fails when it reaches either
field.
Read aborting and bypass_depth from scx_root instead. This preserves the
script's current root-scheduler view: with sub-scheduler support, the
reported values are for the root scheduler and sub-schedulers are not
enumerated.
Fixes: 5c8d98a1b4 ("sched_ext: Move bypass state into scx_sched")
Fixes: c1743da43c ("sched_ext: Move aborting flag to per-scheduler field")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When sibling CPU exclusion occurs, a partition's effective_xcpus may be
a subset of its user_xcpus. The partcmd_update path must use
effective_xcpus instead of user_xcpus when calculating CPUs to return
to or request from the parent.
Add two test cases to verify this behavior:
1) Narrowing cpuset.cpus to only the sibling-excluded CPUs should not
return CPUs to parent that the partition never actually owned.
2) Expanding cpuset.cpus after a sibling becomes a member should
correctly request the additional CPUs from parent.
Co-developed-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Sun Shaojie <sunshaojie@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When sibling CPU exclusion occurs, a partition's user_xcpus may contain
CPUs that were never actually granted to it. These CPUs are present in
user_xcpus(cs) but not in cs->effective_xcpus.
The partcmd_update path in update_parent_effective_cpumask() uses
user_xcpus(cs) (via the local variable xcpus) to compute the addmask
(CPUs to return to parent) and delmask (CPUs to request from parent).
This is incorrect:
1) When newmask removes a CPU that was previously excluded by a
sibling, addmask incorrectly includes that CPU and tries to return
it to the parent even though the partition never actually owned it,
causing CPU overlap with sibling partitions and triggering warnings
in generate_sched_domains().
2) When newmask adds a previously excluded CPU that is now available,
delmask fails to request it from the parent because user_xcpus(cs)
already includes it.
Fix this by using cs->effective_xcpus instead of user_xcpus(cs) in all
partcmd_update paths that calculate addmask or delmask, including the
PERR_NOCPUS error handling paths.
Reproducers:
Example 1 - Removing a sibling-excluded CPU incorrectly returns it:
# cd /sys/fs/cgroup
# echo "0-1" > a1/cpuset.cpus
# echo "root" > a1/cpuset.cpus.partition
# echo "0-2" > b1/cpuset.cpus
# echo "root" > b1/cpuset.cpus.partition
# echo "2" > b1/cpuset.cpus
# cat cpuset.cpus.effective
# Actual: 0-1,3 Expected: 3
Example 2 - Expanding to a previously excluded CPU fails to request it:
# cd /sys/fs/cgroup
# echo "0-1" > a1/cpuset.cpus
# echo "root" > a1/cpuset.cpus.partition
# echo "0-2" > b1/cpuset.cpus
# echo "root" > b1/cpuset.cpus.partition
# echo "member" > a1/cpuset.cpus.partition
# echo "1-2" > b1/cpuset.cpus
# cat cpuset.cpus.effective
# Actual: 0-1,3 Expected: 0,3
Fixes: 2a3602030d ("cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Sun Shaojie <sunshaojie@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit bf9e4e30f3 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ]
Fixes: bf9e4e30f3 ("x86/mm: use pagetable_free()")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Lance Yang <lance.yang@linux.dev>
Link: https://lore.kernel.org/20260429-vmemmap-v2-1-8dfcacffd877@kernel.org
Link: https://patch.msgid.link/20260429-vmemmap-v2-1-8dfcacffd877@kernel.org
Cc: stable@vger.kernel.org
The xfstests' test-case generic/637 fails with error:
FSTYP -- hfs
PLATFORM -- Linux/x86_64 kvm-xfstests 6.15.0-rc4-xfstests-g00b827f0cffa #1 SMP PREEMPT_DYNAMIC Fri May 25
MKFS_OPTIONS -- /dev/vdc
MOUNT_OPTIONS -- /dev/vdc /vdc
QA output created by 637
entries 7 and 8 have duplicate d_off 8
Found unlinked files in open dir (see xfstests-dev/results//generic/637.full for details)
Likewise HFS+, currently, HFS has very complicated and
fragile logic of rd->file->f_pos correction in hfs_delete_cat().
This patch removes this logic and it stores the current
pos into hfs_readdir_data. Finally, if rd->pos == ctx->pos
then hfs_readdir() tries to find the position in
b-tree's node by means of hfs_cat_key. This position is
used to re-start the folder's content traversal.
sudo ./check generic/637
FSTYP -- hfs
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.1.0-rc1+ #55 SMP PREEMPT_DYNAMIC Tue May 19 15:18:02 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/637 32s ... 31s
Ran: generic/637
Passed all 1 tests
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/65
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260519222811.1311071-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
print_worker_info() declares its local 'fn' as work_func_t * but
worker->current_func has type work_func_t (a function pointer). The
extra level of indirection is wrong and only happens to be harmless
today because every supported Linux architecture has
sizeof(work_func_t) == sizeof(work_func_t *):
copy_from_kernel_nofault() reads the correct number of bytes by
accident, and %ps still resolves the printed address because the
stored value is the function address regardless of declared type.
On any future ABI where sizeof(void (*)()) differs from
sizeof(void *), the nofault copy would transfer the wrong number of
bytes and the subsequent %ps would print an incorrect address.
Match the field type so the intent is explicit and the code does not
silently rely on equal pointer sizes.
Fixes: 3d1cb2059d ("workqueue: include workqueue info when printing debug dump of a worker task")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add BIT_ULL(35) (CpuidUserDis) to the valid mask in hwcr_msr_test, now that
KVM accepts writes to this bit when the guest CPUID advertises
CpuidUserDis.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-6-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On AMD CPUs, CPUID faulting support is advertised via
CPUID.80000021H:EAX.CpuidUserDis[bit 17] and enabled by setting
HWCR.CpuidUserDis[bit 35].
Advertise the feature to userspace regardless of host CPU support. Allow
writes to HWCR to set bit 35 when the guest CPUID advertises
CpuidUserDis. Update cpuid_fault_enabled() to check HWCR.CpuidUserDis as
well as MSR_FEATURE_ENABLES.CPUID_GP_ON_CPL_GT_0.
Unlike VMX, SVM prioritizes the CPUID intercept over the #GP induced by
CPUID faulting.[1] This behavior has been confirmed on a Turin CPU (F/M/S
1AH/2/1).
Link: https://lore.kernel.org/r/DS7PR12MB82011943131DF5415365E19E940B2@DS7PR12MB8201.namprd12.prod.outlook.com [1]
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-5-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The function, supports_cpuid_fault(), tests specifically for guest support
of Intel's CPUID faulting feature. It does not test for guest support of
AMD's CPUID faulting feature.
To avoid confusion, remove the helper.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260527174347.2356165-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Per the Intel SDM, "Certain exceptions have priority over VM exits. These
include invalid-opcode exceptions, faults based on privilege level, and
general-protection exceptions that are based on checking I/O permission
bits in the task-state segment (TSS)."
Ensure that when L2 executes CPUID at CPL > 0 while L1 has enabled CPUID
faulting, KVM intercepts the exit in L0 and queues #GP rather than
forwarding the CPUID VM-exit to L1.
Empirical testing confirms that this #GP has higher precedence than a CPUID
VM-exit on Granite Rapids (F/M/S 6/0xad/1).
Fixes: db2336a804 ("KVM: x86: virtualize cpuid faulting")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260513224608.1859737-1-jmattson%40google.com?part=3
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the logic for emulating CPUID faulting (where CPUID #GPs at CPL>0
outside of SMM) into a dedicated helper and use the helper for both the
full emulator and the intercepted-CPUID paths.
Opportunistically drop kvm_require_cpl(), as kvm_emulate_cpuid() was the
one and only user.
No functional change intended.
[jim: Add EXPORT_STATIC_CALL_GPL(kvm_x86_get_cpl) so that KVM vendor
modules can call kvm_is_cpuid_allowed(). Fix typo in commit message.]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260527174347.2356165-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|| is a boolean operator, any nonzero (error) return short-circuits
to 1 rather than the actual errno. The caller in scx_init() logs and
propagates this value, so the wrong code reaches upper layers.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add boundary checks in acpi_ps_get_next_namestring() and
acpi_ps_peek_opcode() to prevent out-of-bounds access.
Link: cfdc96896d
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5180044.0VBMTVartN@rafael.j.wysocki
The debug code in acpi_ps_delete_parse_tree() uses ("%*.s", level * 4, " ")
to indent traces.
POSIX requires the empty precision be treated as zero, but the kernel treats
is as 'no precision specified'.
Change to ("%*s", level * 4, "") since there is additional whitespace and no
reason to indent by one space when level is zero.
Link: a87038098a
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2914242.BEx9A2HvPv@rafael.j.wysocki
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows.
Link: f85a43098d
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2230782.OBFZWjSADL@rafael.j.wysocki
acpi_ns_custom_package() unconditionally dereferences the first element
of the package to read the _BIX version number, without checking for
NULL:
if ((*Elements)->Common.Type != ACPI_TYPE_INTEGER)
When firmware returns a _BIX package whose first element is an
unresolvable reference, ACPICA evaluates that entry to NULL.
acpi_ns_remove_null_elements() does not strip NULL entries for
ACPI_PTYPE_CUSTOM packages (fixed-position format would break if
elements were shifted), so acpi_ns_custom_package() sees the NULL
and causes a crash.
Add a NULL check for the first element (version field) before
dereferencing it. The caller then receives AE_AML_OPERAND_TYPE
instead of crashing.
Link: f3f111b901
Reported-by: Xiang Mei <xmei5@asu.edu>
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5674388.Sb9uPGUboI@rafael.j.wysocki
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities.
Link: b35adf49e8
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/118666237.nniJfEyVGO@rafael.j.wysocki
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler().
Link: f6fc648a13
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/48111441.fMDQidcC6G@rafael.j.wysocki
Improve argument parsing in acpi_ps_get_next_simple_arg() to handle
remaining AML data safely.
Link: ecbb8bcfe3
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2008043.taCxCBeP46@rafael.j.wysocki
Add overflow check for Index + Length to prevent integer overflow
when calculating the truncation length. This prevents negative
size parameter being passed to memcpy().
Link: d281ec1ac8
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3760974.R56niFO833@rafael.j.wysocki
Prevent adding references for local, argument, and debug objects
in acpi_ut_copy_simple_object().
Link: f576898d78
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4511989.ejJDZkT8p0@rafael.j.wysocki
Fix use-after-free issue in acpi_ds_terminate_control_method() by
clearing references to method locals and arguments.
Link: 36f22a94cb
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8730924.NyiUUSuA9g@rafael.j.wysocki
For ACPI_RSC_MOVE8, the 'Value' field in struct acpi_rsconvert_info
is the item count count and not a bit position like for the
bitflags. Set 'Value' as '1' to fix this.
Conversion still works coincidentally with '0' because
item_count is not reset between table entries, and the previous
count value was taking effect.
Link: 70082dc8fc
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6164740.MhkbZ0Pkbq@rafael.j.wysocki
When the 64-bit address is set but bit_width is 0, the spec says
the legacy length should be used. That is valid firmware.
Skip the warning if bit_width is 0.
This avoids false warnings like:
32/64X length mismatch in FADT/gpe0_block: 128/0
Tested on free_BSD 16.0-CURRENT.
Link: b6387a387c
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8688362.T7Z3S40VBb@rafael.j.wysocki
- Mark nodes as alias in ld_namespace2_begin() function.
- Skip teardown for alias nodes in acpi_ns_detach_object() function.
- Define ANOBJ_IS_ALIAS flag in aclocal.h.
Link: cfcc46c4f7
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14020896.uLZWGnKmhe@rafael.j.wysocki
Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent
out-of-bounds access.
Link: 3b537b9233
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1959692.tdWV9SEqCh@rafael.j.wysocki
ACPI 6.6 introduces "Test" command for Multiprocessor Wakeup as well as
resetting the Multiprocessor Wakeup Mailbox
Link: a4f629dc90
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2414431.ElGaqSPkdT@rafael.j.wysocki
Commit 47ac2a4b5c ("rust: kvec: implement shrink_to for KVVec")
introduced a call to bindings::is_vmalloc_addr(). However, this
fails to compile on architectures where CONFIG_MMU is disabled,
resulting in the following build error:
error[E0425]: cannot find function `is_vmalloc_addr` in crate `bindings`
--> rust/kernel/alloc/kvec.rs:781:32
|
781 | if !unsafe { bindings::is_vmalloc_addr(self.ptr.as_ptr().cast()) } {
| ^^^^^^^^^^^^^^^ not found in `bindings`
When CONFIG_MMU is not set, is_vmalloc_addr() is defined as a
static inline function in <linux/mm.h> that unconditionally
returns false. Because bindgen skips static inline functions
when generating bindings, the symbol is completely missing from
the Rust bindings crate.
Fix this by providing a C helper wrapper, rust_helper_is_vmalloc_addr(),
in rust/helpers/vmalloc.c. This ensures the function is reliably
exposed to Rust regardless of the MMU configuration. On NOMMU builds,
this allows KVVec::shrink_to() to successfully compile and correctly
route all allocations through the kmalloc realloc path.
Fixes: 47ac2a4b5c ("rust: kvec: implement shrink_to for KVVec")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605220811.LRplxeBR-lkp@intel.com/
Signed-off-by: Shivam Kalra <shivamkalra98@zohomail.in>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260523-is-vmalloc-addr-build-fix-v1-1-73c919440c41@zohomail.in
[ Pasted exact compiler output and expanded it. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.
Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:
BUG: unable to handle page fault for address: ffff889101603d38
RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme]
Call Trace:
nvme_init_hctx+0x10/0x20 [nvme]
nvme_alloc_ns+0x9e/0xa10 [nvme_core]
nvme_scan_ns+0x301/0x3b0 [nvme_core]
nvme_scan_ns_async+0x23/0x30 [nvme_core]
Switch the parameter to int and fall back to node 0 when it is
NUMA_NO_NODE; node 0 is always present.
Fixes: d977506f88 ("nvme-pci: make PRP list DMA pools per-NUMA-node")
Link: https://lore.kernel.org/r/20260309062840.2937858-2-iam@sung-woo.kim
Reported-by: Sung-woo Kim <iam@sung-woo.kim>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mateusz Nowicki <mateusz.nowicki@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
