Commit graph

1,464,947 commits

Author SHA1 Message Date
Alex Williamson
3788cd493e vfio/pci: Latch all module parameters per device
The vfio-pci module parameters of disable_idle_d3, nointxmask, and
disable_vga latch vfio-pci policy into vfio-pci-core globals each time
the vfio-pci module is initialized.  The disable_idle_d3 parameter has
already migrated to a per-device flag in order to provide consistency
for refcounted PM operations for the lifetime of the device
registration.

Pull the remaining vfio-pci module-parameter policy out of vfio-pci-core
into per-device flags set at device initialization.

This also restores the mutable aspect of the disable_idle_d3 and
nointxmask module parameters for vfio-pci, with the caveat that the
parameters are latched into the device at probe.

A notable change for variant drivers is that their devices are no longer
affected by vfio-pci module parameters and those drivers may need to
adopt similar module parameters if any devices have a hidden dependency
on vfio-pci setting non-default policy.

Assisted-by: Claude:claude-opus-4-8
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-6-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-06-29 13:46:50 -06:00
Alex Williamson
f2365a63b0 vfio/mlx5: Fix racy bitfields and tighten struct layout
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.

This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.

Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.

Bitfield justifications:

  migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
  chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
  mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe

Dedicated storage units:

  mdev_detach: written in the VF attach/detach event notifier
               mlx5fv_vf_event() at runtime
  log_active: written in mlx5vf_start_page_tracker()/
              mlx5vf_stop_page_tracker() during runtime dirty tracking
  deferred_reset: written in mlx5vf_state_mutex_unlock()/
                  mlx5vf_pci_aer_reset_done() during runtime reset handling
  is_err: set by tracker error handling and dirty-log polling at runtime
  object_changed: set by tracker event handling and cleared by dirty-log
                  polling at runtime

Fixes: 61a2f1460f ("vfio/mlx5: Manage the VF attach/detach callback from the PF")
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Fixes: f886473071 ("vfio/mlx5: Add support for tracker object change event")
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-5-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-06-29 13:46:50 -06:00
Alex Williamson
e73638e55f vfio/pci: Fix racy bitfields and tighten struct layout
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.

This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.

Note that the virq_disabled and bardirty flags are relocated to fill
an existing hole in the structure.

Bitfield justifications:

  has_dyn_msix: written only in vfio_pci_core_enable()
  pci_2_3: written only in vfio_pci_core_enable()
  reset_works: written only in vfio_pci_core_enable()
  extended_caps: written only in vfio_cap_len() under vfio_config_init()
  has_vga: written only in vfio_pci_core_enable()
  nointx: written only in vfio_pci_core_enable()
  needs_pm_restore: written only in vfio_pci_probe_power_state()
  disable_idle_d3: written only at .init in vfio_pci_core_init_dev()

Dedicated storage units:

  virq_disabled: written by guest INTx command writes in
                 vfio_basic_config_write() while the device is open
  bardirty: written by guest BAR writes in vfio_basic_config_write()
            while the device is open
  pm_intx_masked: written in the runtime-PM suspend path.
  pm_runtime_engaged: written by low-power feature entry/exit paths
  needs_reset: set in vfio_pci_core_disable() and cleared for devices in
               the set by vfio_pci_dev_set_try_reset()
  sriov_active: written by vfio_pci_core_sriov_configure() via sysfs
                sriov_numvfs while bound.

Fixes: 9cd0f6d5cb ("vfio/pci: Use bitfield for struct vfio_pci_core_device flags")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-4-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-06-29 13:46:49 -06:00
Alex Williamson
daedde7f02 vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.

In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie.  The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.

Add the required VGA unwind callout.

Fixes: 4aeec3984d ("vfio/pci: Re-order vfio_pci_probe()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-06-29 13:46:49 -06:00
Alex Williamson
4575e9aac5 vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state().  There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot.  Therefore
the module parameter was made writable.

Later, in commit c61302aa48 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified.  The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init.  Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.

Runtime PM was introduced in commit 7ab5e10eda ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted.  PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers.  This introduces a window where PM operations
can now become unbalanced.

To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.

NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag.  When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.

Fixes: 7ab5e10eda ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-06-29 13:46:49 -06:00
Vijendar Mukunda
91a6dba518
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
SOF spans multiple vendors and hardware paths. AMD ships ACP-based
platforms and contributes to the shared SOF tree, so list an AMD
reviewer (R:) on the SOF MAINTAINERS entry for balanced review and
correct get_maintainer coverage when shared SOF code changes.
Add:
  R: Vijendar Mukunda <Vijendar.Mukunda@amd.com>

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260629025722.1982120-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-29 18:58:32 +01:00
Lizhi Hou
b4a0500fdf accel/amdxdna: Fix iommu domain lifetime race during device removal
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.

Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released.

Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-3-lizhi.hou@amd.com
2026-06-29 10:44:03 -07:00
Lizhi Hou
5c72124186 accel/amdxdna: Fix notifier_wq lifetime race during device removal
amdxdna_remove() destroys notifier_wq. If amdxdna_gem_obj_free() is
called after device removal, it may attempt to flush notifier_wq,
resulting in a use-after-free.

Fix the race by allocating notifier_wq with
drmm_alloc_ordered_workqueue(), so its lifetime is managed by DRM and
remains valid until all managed resources are released.

Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-2-lizhi.hou@amd.com
2026-06-29 10:34:48 -07:00
Lizhi Hou
1dbbc7f98c accel/amdxdna: Fix amdxdna_client lifetime race during device removal
In amdxdna_remove(), all amdxdna_client structures are freed after
calling drm_dev_unplug(). However, drm_dev_unplug() does not force
existing file descriptors to be closed, so amdxdna_drm_close() may be
called after amdxdna_remove() has completed.

As a result, accessing client->pid for debug output in
amdxdna_drm_close() can lead to a use-after-free, since the access is
not protected by drm_dev_enter().

Fix this by decoupling hardware teardown from client cleanup.
amdxdna_remove() only performs hardware-related cleanup, while
per-client resources are released from amdxdna_drm_close() when the
corresponding file is closed.

Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-1-lizhi.hou@amd.com
2026-06-29 10:33:30 -07:00
Jisheng Zhang
991af5d809
spi: dw: use the correct error msg if request_irq() fails
If request_irq() fails, report "can not request IRQ" rather than "can
not get IRQ" which may be misread as platform_get_irq() failure.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260615044039.9750-3-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-29 18:27:49 +01:00
Jisheng Zhang
d322d820e0
spi: dw: fix first spi transfer with dma always fallback to PIO
Even with proper dma engine support, the first spi transfer always
fallback to PIO, the reason is the dws->n_bytes is 0 after
initialization, so the dw_spi_can_dma() calling from __spi_map_msg()
return false, thus both tx_sg_mapped and rx_sg_mapped are false, so
for the first spi transfer, the spi_xfer_is_dma_mapped() reports false
thus fallback to PIO.

Although this brings no harm, we can simply fix this issue by
calcuating the "n_bytes" from xfer->bits_per_word.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260615044039.9750-2-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-29 18:27:48 +01:00
Maarten Lankhorst
00599d4841 Merge drm/drm-fixes into drm-misc-fixes
Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2026-06-29 17:58:00 +02:00
HyeongJun An
e2735b39f0 hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:

	id = &obj->package.elements[0];
	if (id->type != ACPI_TYPE_INTEGER)

without checking that the sub-package is non-empty.  ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.

The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first.  Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read.

Fixes: 9e6eba610c ("hwmon: (asus_atk0110) Enable the EC")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://lore.kernel.org/r/20260619122746.721981-1-sammiee5311@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-29 08:51:59 -07:00
Randy Dunlap
40ac87fedb docs: hwmon: ltc4283: fix malformed table docs build error
Expand the table borders (upper & lower) to prevent a documentation
build error:

Documentation/hwmon/ltc4283.rst:261: ERROR: Malformed table.
Text in column margin in table line 3.
=======================         ==========================================
power1_failed_fault_log         Set to 1 by a power1 fault occurring.
power1_good_input_fault_log     Set to 1 by a power1 good input fault occurring at PGIO3.

Fixes: dd63353a0b ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260620011833.3568693-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-29 08:47:44 -07:00
Abdurrahman Hussain
828cd614e2 hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.

Mirror pmbus_reg2data_vid() so writes round-trip with reads.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude:claude-opus-4-7 [Claude Code]
Link: https://lore.kernel.org/r/20260620-pmbus-data2reg-vid-v1-1-5518030432c4@nexthop.ai
Fixes: 068c227056 ("hwmon: (pmbus) Add support for VR12")
Fixes: d4977c083a ("hwmon: (pmbus) Add support for Intel VID protocol VR13")
Fixes: 9d72340b6a ("hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes")
Fixes: 969a4ec86c ("hwmon: (pmbus/core) Add support for NVIDIA nvidia195mv mode")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-29 08:44:41 -07:00
Runyu Xiao
e314087343 hwmon: (occ) unregister sysfs devices outside occ lock
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held.  hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again.  That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.

This issue was found by our static analysis tool and then manually
reviewed against the current tree.

The grounded PoC kept the real unregister and callback carrier:

  occ_shutdown()
  hwmon_device_unregister()
  occ_show_temp_1()
  occ_update_response()

Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:

  WARNING: possible circular locking dependency detected
  ... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
  ... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
  occ_update_response.isra.0+0xb/0x20 [vuln_msv]
  occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
  *** DEADLOCK ***

Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister().  Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held.  Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device.

Fixes: 849b0156d9 ("hwmon: (occ) Delay hwmon registration until user request")
Fixes: ac6888ac5a ("hwmon: (occ) Lock mutex in shutdown to prevent race with occ_active")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://lore.kernel.org/r/20260619015938.494464-1-runyu.xiao@seu.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-29 08:40:26 -07:00
Fabio Porcedda
b33ab1dd80 USB: serial: option: add Telit Cinterion FE990D50 compositions
Add support for Telit Cinterion FE990D50 compositions:

0x990: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
       tty (diag) + ADPL + adb
T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=0990 Rev=06.06
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=90b6a3ed
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x991: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
       tty (diag) + ADPL + adb
T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=0991 Rev=06.06
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=90b6a3ed
C:  #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x992: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
       tty (diag) + ADPL + adb
T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 12 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=0992 Rev=06.06
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=90b6a3ed
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x993: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
       tty (diag) + ADPL + adb
T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 15 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=0993 Rev=06.06
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=90b6a3ed
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
2026-06-29 17:01:33 +02:00
Pengpeng Hou
16f7ec8d5d mtd: nand: mtk-ecc: stop on ECC idle timeouts
mtk_ecc_wait_idle() logs when the encoder or decoder does not become
idle, but returns void. Callers can therefore configure a non-idle ECC
engine or read parity bytes after an unconfirmed encoder idle state.

Return the idle poll result and propagate it from the enable and encode
paths that require the engine to be idle before continuing.

Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:58:00 +02:00
Pengpeng Hou
66fb313581 mtd: mtdswap: remove debugfs stats file on teardown
mtdswap_add_debugfs() creates an mtdswap_stats debugfs file under the
per-MTD debugfs directory, but mtdswap_remove_dev() never removes it
before freeing the mtdswap_dev.

Store the returned dentry and remove it during device teardown before the
driver-private state is freed.

Fixes: a321590246 ("mtd: Add mtdswap block driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:52:26 +02:00
Deepanshu Kartikey
a74e31d0a2 mtd: mtdpart: validate partition bounds in mtd_add_partition()
mtd_add_partition() checks that 'length' is positive but does not
validate that 'offset + length' fits within the parent partition's
size. A userspace caller using the BLKPG_ADD_PARTITION ioctl can
supply a crafted large 'length' value that passes the length <= 0
check, causing add_mtd_device() to fire a WARN_ON() when it detects
the oversized partition.

Fix this by adding explicit bounds checks before allocate_partition()
is called:
  - Reject negative or out-of-range offsets.
  - Use u64 arithmetic to safely check offset + length <= parent_size,
    avoiding potential signed integer overflow.

Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:43:51 +02:00
Nikolay Ivchenko
ae9d8058f1 mtd: mtdpart: fix uninitialized erasesize on MTDPART_OFS_RETAIN error path
When parsing partition layouts, if a partition requested with
MTDPART_OFS_RETAIN runs out of space, the allocator jumps directly
to 'out_register' to preserve partition numbering.

However, this jump bypasses child->erasesize initialization, leaving
it at zero. When add_mtd_device() is later called on this child, the
registration fails and triggers a WARN_ON() due to the zero ->erasesize.

Fix this by zeroing out child->part.offset and child->part.size, and
initializing child->erasesize to parent->erasesize. This is the exact
same pattern already used just a few lines below in the "out of reach"
error check (child->part.offset >= parent_size) to safely register a
disabled partition.

Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Nikolay Ivchenko <nivchenko.dev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:42:42 +02:00
Arnd Bergmann
97f9e509d8 mtd: rawnand: ndfc: add CONFIG_OF dependency
When compile-testing on x86 without CONFIG_OF, the ndfc driver produces
a harmless warning:

drivers/mtd/nand/raw/ndfc.c: In function 'ndfc_probe':
include/linux/dev_printk.h:154:31: error: 'len' is used uninitialized [-Werror=uninitialized]
  154 |         dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
      |                               ^
drivers/mtd/nand/raw/ndfc.c:196:17: note: in expansion of macro 'dev_err'
  196 |                 dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);

Limit compile-testing to configurations with CONFIG_OF to trivially
avoid this. The driver will still be built in allmodconfig and many
randconfig builds.

Fixes: 4f2692a538 ("mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:41:21 +02:00
Ruoyu Wang
5d7a08125e mtd: spinand: initialize ret in regular page reads
spinand_mtd_regular_page_read() returns ret after iterating over the
requested pages. If the request contains no data or OOB bytes, the
iterator does not run and ret is not assigned. Initialize it to 0 for the
empty request path.

Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:40:36 +02:00
Harshit Mogalapalli
4b45d7836b mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy()
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a
use-after-free.

Fix it by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy().

Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:40:13 +02:00
Pengpeng Hou
1a8b2951ba mtd: rawnand: ingenic: handle ECC clock enable failures
ingenic_ecc_get() obtains a provider device reference and then enables
the ECC clock before returning the ECC handle.

The clk_prepare_enable() return value is currently ignored.  If enabling
the clock fails, the function still returns the ECC handle and keeps the
provider device reference even though the acquire operation did not
complete.

Return the clock enable error and drop the provider device reference on
that failure path.

Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:39:14 +02:00
Pengpeng Hou
82d9a2b45b mtd: nand: ecc-mtk: handle ECC clock enable failures
mtk_ecc_get() gets a reference to the ECC platform device, obtains the
provider state and then enables the ECC clock before initializing the
hardware.

The clk_prepare_enable() return value is currently ignored.  If enabling
the clock fails, the code still touches the ECC registers and returns a
live ECC handle to the caller.  The provider device reference acquired
by of_find_device_by_node() is also kept even though the handle setup
failed.

Propagate the clock enable error and drop the provider device reference
on that failure path.

Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:39:06 +02:00
Harshit Mogalapalli
75c0c09541 mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins()
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free.

Fix this by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy()

Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:38:55 +02:00
Rosen Penev
cceca8cb77 mtd: rawnand: ndfc: fix gcc uninitialized var
Now that this can be built with COMPILE_TEST, an unassigned variable was
found. Set to 0 to fix the W=1 error under GCC.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606141301.iyVdFgl7-lkp@intel.com/
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2026-06-29 16:38:38 +02:00
Luca Weiss
0773610eef
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
According to both the static definition in downstream...

  yupik-audio-overlay.dtsi: qcom,bolero-version = <4>;
  #define BOLERO_VERSION_2_0 0x0004)

and the runtime detection:

  CDC_VA_TOP_CSR_CORE_ID_0=0x1
  CDC_VA_TOP_CSR_CORE_ID_1=0xf

SC7280 has LPASS Codec Version 2.0 and not, as declared with
sm8250_va_data LPASS_CODEC_VERSION_1_0.

Create new va_macro_data with .version not set to use the runtime
detection and correctly get .version = LPASS_CODEC_VERSION_2_0.

Fixes: 77212f300b ("ASoC: codecs: lpass-va-macro: set the default codec version for sm8250")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526-sc7280-va-macro-2-0-v1-1-2c1b572fa388@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-29 14:33:20 +01:00
Michael Bommarito
d2e52d610b IB/mad: Drop unmatched RMPP responses before reassembly
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.

That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.

For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.

This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request.

Fixes: fa619a7704 ("[PATCH] IB: Add RMPP implementation")
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/3170ff3bc389a930bb1641f2caa394a0b2241579.1780774907.git.michael.bommarito@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2026-06-29 08:08:59 -04:00
Baineng Shou
77a9298741 dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.

The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.

But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.

Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array.

Cc: stable@vger.kernel.org
Signed-off-by: Baineng Shou <shoubaineng@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 575ec9b0c2 ("dma-fence: Add helper to sort and deduplicate dma_fence arrays")
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260629031346.3875683-1-shoubaineng@gmail.com
2026-06-29 13:35:46 +02:00
Philipp Stanner
035219a760 dma-buf: dma-fence: Fix potential NULL pointer dereference
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".

A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).

This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.

Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.

These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.

Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name().

Cc: stable@vger.kernel.org
Fixes: f4cc3ab824 ("dma-buf: protected fence ops by RCU v8")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20260629075636.2513214-2-phasta@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
2026-06-29 13:18:36 +02:00
Anshuman Khandual
ff4c5a0de1 arm64/mm: Optimize TLB flush in unmap_hotplug_[pmd|pud]_range()
Commit 48478b9f79 ("arm64/mm: Enable batched TLB flush in
unmap_hotplug_range") inadvertently introduced redundant TLB
invalidation when clearing a block entry, resulting in unnecessary
broadcast invalidation on CPUs without support for range-based
invalidation.

Re-introduce the old behaviour, along with some expanded comments to
help people working in this area next time around.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Closes: https://lore.kernel.org/all/b0d5836032ce3135bfc473f6bff791306d086925.camel@decadent.org.uk/
Fixes: 48478b9f79 ("arm64/mm: Enable batched TLB flush in unmap_hotplug_range()")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: Reword comments and commit message]
Signed-off-by: Will Deacon <will@kernel.org>
2026-06-29 12:18:10 +01:00
Miguel Ojeda
608045a91d rust: allow suspicious_runtime_symbol_definitions lint for Rust >= 1.98
Starting with Rust 1.98.0 (expected 2026-08-20), Rust is introducing a
couple new lints, `invalid_runtime_symbol_definitions` (deny-by-default)
and `suspicious_runtime_symbol_definitions` (warn-by-default), which check
the signature of items whose symbol name is a runtime symbol expected by
`core`.

Our build hits the second one, i.e. the warning:

    error: suspicious definition of the runtime `strlen` symbol used by the standard library
         --> rust/bindings/bindings_generated.rs:20018:5
          |
    20018 |     pub fn strlen(s: *const ffi::c_char) -> usize;
          |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
          |
          = note: expected `unsafe extern "C" fn(*const i8) -> usize`
                  found    `unsafe extern "C" fn(*const u8) -> usize`
          = help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
          = help: allow this lint if the signature is compatible
          = note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
          = help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`

    error: suspicious definition of the runtime `strlen` symbol used by the standard library
         --> rust/uapi/uapi_generated.rs:14236:5
          |
    14236 |     pub fn strlen(s: *const ffi::c_char) -> usize;
          |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
          |
          = note: expected `unsafe extern "C" fn(*const i8) -> usize`
                  found    `unsafe extern "C" fn(*const u8) -> usize`
          = help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
          = help: allow this lint if the signature is compatible
          = note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
          = help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`

Thus `allow` the lint in `bindings` and `uapi`.

A more targeted alternative to avoid `allow`ing it would be to pass
`--blocklist-function strlen` to `bindgen`, but we would perhaps need
to adjust if other C headers end up adding more (or Rust checking more).
Since it is just the less critical one that we hit, and since eventually
this should be properly fixed by getting upstream Rust to provide a flag
like GCC/Clang's `-funsigned-char` [2][3], just `allow` it for now.

Cc: Urgau <urgau@numericable.fr>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/155521 [1]
Link: https://github.com/rust-lang/rust/issues/138446 [2]
Link: https://github.com/Rust-for-Linux/linux/issues/355 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260615143225.471756-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2026-06-29 13:02:15 +02:00
Catalin Marinas
534eb6940a arm64: Avoid eager DVMSync reclaim batches with C1-Pro SME erratum
The C1-Pro SME DVMSync workaround currently samples mm_cpumask() from
arch_tlbbatch_add_pending(). It requires a DSB after every batched TLBI
so that the mask read is ordered after the hardware DVMSync, defeating
much of the reclaim batching benefit.

Introduce the sme_active_cpus mask tracking which CPUs run in user-space
with SME enabled and use it for batch flushing instead of accumulating
the mm_cpumask() of the unmapped pages.

Fixes: 0baba94a97 ("arm64: errata: Work around early CME DVMSync acknowledgement")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Tested-by: Joshua Liu <josliu@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
2026-06-29 12:00:37 +01:00
Jinjie Ruan
f9a82544c7 cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.

In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:

  WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
  [...]
  Call trace:
    internal_create_group+0x41c/0x4bc (P)
    sysfs_create_group+0x18/0x24
    topology_add_dev+0x1c/0x28
    cpuhp_invoke_callback+0x104/0x20c
    __cpuhp_invoke_callback_range+0x94/0x11c
    _cpu_up+0x200/0x37c

When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:

1. The first four CPUs: `Enabled` set but `Online Capable` not set.

2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
   to support potential hot-plugging.

Fix this by:

1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
   entry before calling set_cpu_present() during SMP initialization.

2. Properly managing the present mask in acpi_map_cpu() and
   acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
   other architectures like x86 and LoongArch.

3. Update the arm64 CPU hotplug documentation to no longer state that all
   online-capable vCPUs are marked as present by the kernel at boot time.

This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: stable@vger.kernel.org
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#gic-cpu-interface-gicc-structure
Fixes: eed4583bcf ("arm64: Kconfig: Enable HOTPLUG_SMT")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2026-06-29 11:47:36 +01:00
Jinjie Ruan
18a4e5cf63 arm64: smp: Fix hot-unplug tearing by forcing unregistration
Sashiko review pointed out the following issue[1].

Commit eba4675008 ("arm64: arch_register_cpu() variant to check if
an ACPI handle is now available.") introduced architectural safety
blocks inside arch_unregister_cpu(). If a hot-unplug operation is
determined to be a physical hardware removal (where _STA evaluates to
!ACPI_STA_DEVICE_PRESENT), or if firmware evaluation fails, it aborts
the unregistration transaction early to protect unreadied arm64
infrastructure.

However, returning early from arch_unregister_cpu() causes a catastrophic
state tearing because the generic ACPI layer (acpi_processor_post_eject())
unconditionally continues its cleanup flow. This leaves the stale sysfs
device leaked in the memory, deadlocking any subsequent hot-add attempts
on the same CPU.

Fix it by simplifying arch_unregister_cpu() to always proceed with
the unregistration, as a pr_err_once() warning is sufficient to make
it more visible for currently not supported physical CPU removal.
Also remove the redundant NULL check on acpi_handle as it cannot be
NULL when calling arch_unregister_cpu().

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260520022023.126670-1-ruanjinjie@huawei.com [1]
Fixes: eba4675008 ("arm64: arch_register_cpu() variant to check if an ACPI handle is now available.")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2026-06-29 11:47:05 +01:00
WenTao Liang
5cff1529a2 ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.

Remove the redundant usb_anchor_urb() from the resubmit path.

Cc: stable@vger.kernel.org
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260627042949.61767-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-06-29 12:17:18 +02:00
Seth Forshee
53716a4d74 firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
FFA_FEATURES reports the minimum size and alignment boundary required
for RXTX_MAP. In FF-A v1.2 and later it can also report a maximum buffer
size, with zero meaning that no maximum is enforced.

The driver only used the minimum value and then rounded it up to PAGE_SIZE
before invoking RXTX_MAP after commit 83210251fd ("firmware: arm_ffa:
Use the correct buffer size during RXTX_MAP"). On systems where PAGE_SIZE
is larger than the advertised minimum, this can exceed a non-zero maximum
reported by firmware. Older implementations do not advertise a maximum and
may also reject the rounded-up size.

Decode the maximum size and clamp the page-aligned minimum to it when it
is present. If no maximum is advertised and RXTX_MAP rejects the rounded
size with INVALID_PARAMETERS, retry with the advertised minimum size.
Record drv_info->rxtx_bufsz only after RXTX_MAP succeeds so it reflects
the size registered with firmware.

While there, also update RXTX_MAP_MIN_BUFSZ() to use FIELD_GET() for
consistency.

Fixes: 83210251fd ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP")
Suggested-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Seth Forshee <sforshee@nvidia.com>
Link: https://patch.msgid.link/20260602-b4-ffa-rxtx-map-fixes-v2-1-7cb06508da84@nvidia.com
(sudeep.holla: Minor rewording subject and commit message)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
2026-06-29 10:42:56 +01:00
Johan Hovold
83a3dfc018 USB: serial: digi_acceleport: fix broken rx after throttle
If the port is closed while throttled, the read urb is never resubmitted
and the port will not receive any further data until the device is
reconnected (or the driver is rebound).

Clear the throttle flags and submit the urb if needed when opening the
port.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2026-06-29 11:40:34 +02:00
Pengpeng Hou
0880884b36 MIPS: configs: Enable the current Ingenic USB PHY symbol
The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
`CONFIG_PHY_INGENIC_USB`.

The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
symbol.  That symbol no longer carries the provider object, so the
defconfigs lose the intended USB PHY provider after olddefconfig.

Use `CONFIG_PHY_INGENIC_USB` instead.

Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2026-06-29 11:37:00 +02:00
Xi Ruoyao
dceafc1803 MIPS: loongson64: add IRQ work based on self-IPI
Since the commit 91840be8f7 ("irq_work: Fix use-after-free in
irq_work_single() on PREEMPT_RT"), we observed the performance of
execve() is significantly impacted on MIPS.

While we are unsure how that commit caused the impact or how to improve
it (or even if it can be improved at all), implementing IRQ work with
self-IPI seems able to mitigate the impaction.

Perhaps this can/should be implemented for other MIPS architecture
processors as well, but we don't have the enough knowledge of them, nor
access to the hardware.  So only implement it for loongson64 here.

Link: https://lore.kernel.org/6be1cdd5f91dd7418a32ff372a6f3ae259b19195.camel@xry111.site/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2026-06-29 11:36:36 +02:00
Kyle Hendry
6d5fbecd02 MIPS: mm: Add check for highmem before removing memory block
If a device has less physical memory than the highmem threshold
bootmem_init() doesn't set highstart_pfn. This results in highmem_init()
wrongly disabling the entire memory range if the cpu doesn't support
highmem. Add a check that highstart_pfn is non zero before removing the
highmem block.

Fixes: f171b55f14 ("mips: fix HIGHMEM initialization")
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2026-06-29 11:34:57 +02:00
Bastian Blank
a9e0237d2e mips: Add build salt to the vDSO
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2026-06-29 11:29:43 +02:00
Maciej W. Rozycki
eacaf5ae74 MIPS: DEC: Ensure RTC platform device deregistration upon failure
Switch RTC platform device registration from platform_device_register()
to platform_add_devices() so as to make sure any failure will result in
automatic device unregistration.

Fixes: fae67ad431 ("arch/mips/dec: switch DECstation systems to rtc-cmos")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2026-06-29 11:27:15 +02:00
Maoyi Xie
7705b4140d HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.

The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.

Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event().

Fixes: 97b741aba9 ("HID: lg-g15: Add keyboard and LCD backlight control")
Cc: stable@vger.kernel.org
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-06-29 11:18:44 +02:00
HyeongJun An
590cc4d782 HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.

Commit 8b9a097eb2 ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.

In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:

  BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
  Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
  ...
  Call Trace:
   logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
   hid_device_probe+0x329/0x3f0 [hid]
   really_probe+0x162/0x570
   __device_attach+0x137/0x2c0
   bus_probe_device+0x38/0xc0
   device_add+0xa56/0xce0
   hid_add_device+0x19c/0x280 [hid]
   uhid_device_add_worker+0x2c/0xb0 [uhid]

Reject the zero-field report before printing the field report_count.

Fixes: b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-06-29 11:18:07 +02:00
Lee Jones
af1a9b65eb HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.

Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.

Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer.

Fixes: 2c85c61d13 ("HID: pass the buffer size to hid_report_raw_event")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-06-29 11:10:23 +02:00
Georgiy Osokin
0021eb0904 HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In picolcd_send_and_wait(), an integer overflow of the signed loop counter
'k' can theoretically lead to a NULL pointer dereference of 'raw_data'.
If the loop executes more than INT_MAX times, 'k' becomes negative,
making the condition 'k < size' true even when 'size' is 0.

Change the type of 'k' to 'unsigned int' to prevent the overflow and
eliminate the out-of-bounds access.

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

[jkosina@suse.com: extended hash length]
Fixes: fabdbf2fd2 ("HID: picoLCD: split driver code")
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-06-29 10:46:13 +02:00
Manish Khadka
75fe87e19d HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.

key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it.  The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report.  If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.

A simple reorder is not sufficient.  Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev.  The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.

Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock.  appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.

The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined.  This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.

This bug is structurally a sibling of commit 4db2af9292 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced.

Fixes: 9a4a5574ce ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Khadka <maskmemanish@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-06-29 10:44:12 +02:00