[ Upstream commit 7349c9e997 ]
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b11536124 ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 220cb1be64 ]
icss_iep_perout_enable_hw() is a common function for generating
both pps and perout signals. When enabling pps, the application needs
to only pass enable/disable argument, whereas for perout it supports
different flags to configure the signal.
In case the app passes a valid phase offset value, the signal should
start toggling after that phase offset, else start immediately or
as soon as possible. ICSS_IEP_SYNC_START_REG register take number of
clock cycles to wait before starting the signal after activation time.
Set appropriate value to this register to support phase offset.
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250304105753.1552159-3-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7349c9e997 ("net: ti: icss-iep: Fix possible NULL pointer dereference for perout request")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5b456a142 ]
icss_iep_perout_enable_hw() is a common function for generating
both pps and perout signals. When enabling pps, the application needs
to only pass enable/disable argument, whereas for perout it supports
different flags to configure the signal.
But icss_iep_perout_enable_hw() function is missing to hook the
configuration params passed by the app, causing perout to behave
same a pps (except being able to configure the period). As duty cycle
is also one feature which can configured for perout, incorporate this
in the function to get the expected signal.
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250304105753.1552159-2-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7349c9e997 ("net: ti: icss-iep: Fix possible NULL pointer dereference for perout request")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a5970d5aa ]
In ptp_ocp_signal_set, the start time for periodic signals is not
aligned to the next period boundary. The current code rounds up the
start time and divides by the period but fails to multiply back by
the period, causing misaligned signal starts. Fix this by multiplying
the rounded-up value by the period to ensure the start time is the
closest next period.
Fixes: 4bd46bb037 ("ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250415053131.129413-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 514eff7b0a ]
This is very similar to the problem and solution from commit
232deb3f95 ("net: dsa: avoid refcount warnings when
->port_{fdb,mdb}_del returns error"), except for the
dsa_port_do_tag_8021q_vlan_del() operation.
Fixes: c64b9c0504 ("net: dsa: tag_8021q: add proper cross-chip notifier support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414213020.2959021-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf108d716 ]
If complete = true in dsa_tree_setup(), it means that we are the last
switch of the tree which is successfully probing, and we should be
setting up all switches from our probe path.
After "complete" becomes true, dsa_tree_setup_cpu_ports() or any
subsequent function may fail. If that happens, the entire tree setup is
in limbo: the first N-1 switches have successfully finished probing
(doing nothing but having allocated persistent memory in the tree's
dst->ports, and maybe dst->rtable), and switch N failed to probe, ending
the tree setup process before anything is tangible from the user's PoV.
If switch N fails to probe, its memory (ports) will be freed and removed
from dst->ports. However, the dst->rtable elements pointing to its ports,
as created by dsa_link_touch(), will remain there, and will lead to
use-after-free if dereferenced.
If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely
possible because that is where ds->ops->setup() is, we get a kasan
report like this:
==================================================================
BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568
Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42
Call trace:
__asan_report_load8_noabort+0x20/0x30
mv88e6xxx_setup_upstream_port+0x240/0x568
mv88e6xxx_setup+0xebc/0x1eb0
dsa_register_switch+0x1af4/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Allocated by task 42:
__kasan_kmalloc+0x84/0xa0
__kmalloc_cache_noprof+0x298/0x490
dsa_switch_touch_ports+0x174/0x3d8
dsa_register_switch+0x800/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Freed by task 42:
__kasan_slab_free+0x48/0x68
kfree+0x138/0x418
dsa_register_switch+0x2694/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
The simplest way to fix the bug is to delete the routing table in its
entirety. dsa_tree_setup_routing_table() has no problem in regenerating
it even if we deleted links between ports other than those of switch N,
because dsa_link_touch() first checks whether the port pair already
exists in dst->rtable, allocating if not.
The deletion of the routing table in its entirety already exists in
dsa_tree_teardown(), so refactor that into a function that can also be
called from the tree setup error path.
In my analysis of the commit to blame, it is the one which added
dsa_link elements to dst->rtable. Prior to that, each switch had its own
ds->rtable which is freed when the switch fails to probe. But the tree
is potentially persistent memory.
Fixes: c5f51765a1 ("net: dsa: list DSA links in the fabric")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414213001.2957964-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7afb5fb42d ]
As explained in many places such as commit b117e1e8a8 ("net: dsa:
delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given
the assumption that higher layers have balanced additions/deletions.
As such, it only makes sense to be extremely vocal when those
assumptions are violated and the driver unbinds with entries still
present.
But Ido Schimmel points out a very simple situation where that is wrong:
https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/
(also briefly discussed by me in the aforementioned commit).
Basically, while the bridge bypass operations are not something that DSA
explicitly documents, and for the majority of DSA drivers this API
simply causes them to go to promiscuous mode, that isn't the case for
all drivers. Some have the necessary requirements for bridge bypass
operations to do something useful - see dsa_switch_supports_uc_filtering().
Although in tools/testing/selftests/net/forwarding/local_termination.sh,
we made an effort to popularize better mechanisms to manage address
filters on DSA interfaces from user space - namely macvlan for unicast,
and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the
fact is that 'bridge fdb add ... self static local' also exists as
kernel UAPI, and might be useful to someone, even if only for a quick
hack.
It seems counter-productive to block that path by implementing shim
.ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP
in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from
running, although we could do that.
Accepting that cleanup is necessary seems to be the only option.
Especially since we appear to be coming back at this from a different
angle as well. Russell King is noticing that the WARN_ON() triggers even
for VLANs:
https://lore.kernel.org/netdev/Z_li8Bj8bD4-BYKQ@shell.armlinux.org.uk/
What happens in the bug report above is that dsa_port_do_vlan_del() fails,
then the VLAN entry lingers on, and then we warn on unbind and leak it.
This is not a straight revert of the blamed commit, but we now add an
informational print to the kernel log (to still have a way to see
that bugs exist), and some extra comments gathered from past years'
experience, to justify the logic.
Fixes: 0832cd9f1f ("net: dsa: warn if port lists aren't empty in dsa_port_teardown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212930.2956310-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea08dfc35f ]
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed.
Fixes: acaf4d2e36 ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212913.2955253-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c84f6ce918 ]
Russell King reports that a system with mv88e6xxx dereferences a NULL
pointer when unbinding this driver:
https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/
The crash seems to be in devlink_region_destroy(), which is not NULL
tolerant but is given a NULL devlink global region pointer.
At least on some chips, some devlink regions are conditionally registered
since the blamed commit, see mv88e6xxx_setup_devlink_regions_global():
if (cond && !cond(chip))
continue;
These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip
does not have an STU or PVT, it should crash like this.
To fix the issue, avoid unregistering those regions which are NULL, i.e.
were skipped at mv88e6xxx_setup_devlink_regions_global() time.
Fixes: 836021a2d0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region")
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2727326d0 ]
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb25de13bd ]
When adding a bridge vlan that is pvid or untagged after the vlan has
already been added to any other switchdev backed port, the vlan change
will be propagated as changed, since the flags change.
This causes the vlan to not be added to the hardware for DSA switches,
since the DSA handler ignores any vlans for the CPU or DSA ports that
are changed.
E.g. the following order of operations would work:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev swbridge vid 1 pvid untagged self
$ bridge vlan add dev lan1 vid 1 pvid untagged
but this order would break:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev lan1 vid 1 pvid untagged
$ bridge vlan add dev swbridge vid 1 pvid untagged self
Additionally, the vlan on the bridge itself would become undeletable:
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 PVID Egress Untagged
$ bridge vlan del dev swbridge vid 1 self
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 Egress Untagged
since the vlan was never added to DSA's vlan list, so deleting it will
cause an error, causing the bridge code to not remove it.
Fix this by checking if flags changed only for vlans that are already
brentry and pass changed as false for those that become brentries, as
these are a new vlan (member) from the switchdev point of view.
Since *changed is set to true for becomes_brentry = true regardless of
would_change's value, this will not change any rtnetlink notification
delivery, just the value passed on to switchdev in vlan->changed.
Fixes: 8d23a54f5b ("net: bridge: switchdev: differentiate new VLANs from changed ones")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250414200020.192715-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36355ddfe8 ]
For STP to work, receiving BPDUs is essential, but the appropriate bit
was never set. Without GC_RX_BPDU_EN, the switch chip will filter all
BPDUs, even if an appropriate PVID VLAN was setup.
Fixes: ff39c2d686 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250414200434.194422-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit beb3c5ad88 ]
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acf4da17de ]
alt-ifname attr is directly placed in requests (as an alternative
to ifname) but in responses its wrapped up in IFLA_PROP_LIST
and only there is may be multi-attr. See rtnl_fill_prop_list().
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ffb3724c ]
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1 ("cxgb4: add skeleton for ethtool n-tuple filters")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399eab7f92 ]
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2fed441c6 ]
vfs_iter_{read,write} always perform direct I/O when the file has the
O_DIRECT flag set, which breaks disabling direct I/O using the
LOOP_SET_STATUS / LOOP_SET_STATUS64 ioctls.
This was recenly reported as a regression, but as far as I can tell
was only uncovered by better checking for block sizes and has been
around since the direct I/O support was added.
Fix this by using the existing aio code that calls the raw read/write
iter methods instead. Note that despite the comments there is no need
for block drivers to ever call flush_dcache_page themselves, and the
call is a left-over from prehistoric times.
Fixes: ab1cb278bc ("block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250409130940.3685677-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fdb8188c3 ]
Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.
Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f2fed441c6 ("loop: stop using vfs_iter_{read,write} for buffered I/O")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12f2d033fa ]
Commit under Fixes converted tx_prod to be free running but missed
masking it on the Tx error path. This crashes on error conditions,
for example when DMA mapping fails.
Fixes: 6d1add9553 ("bnxt_en: Modify TX ring indexing logic.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903d2b9f9e ]
A reference to the device tree node is stored in a private struct, thus
the reference count has to be incremented. Also, decrement the count on
device removal and in the error path.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88fa80021b ]
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484a ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 747fb8413a ]
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f2 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40f2eb9b53 ]
When registering a queue fails after blk_mq_sysfs_register() is
successful but the function later encounters an error, we need
to clean up the blk_mq_sysfs resources.
Add the missing blk_mq_sysfs_unregister() call in the error path
to properly clean up these resources and prevent a memory leak.
Fixes: 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250412092554.475218-1-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52024cd6ec ]
Bind lookup runs under RCU, so ensure that a socket doesn't go away in
the middle of a lookup.
Fixes: 833ef3b91d ("mctp: Populate socket implementation")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250410-mctp-rcu-sock-v1-1-872de9fdc877@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b82f65682 ]
The memory allocated for intr_ctrl_regset, which is passed to
debugfs_create_regset32() may not be cleaned up when the driver is
removed. Fix that by using device managed allocation for it.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250409054450.48606-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a30951d09c ]
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a931c4f5e ]
Add a mutex around the PTM transaction to prevent multiple transactors
Multiple processes try to initiate a PTM transaction, one or all may
fail. This can be reproduced by running two instances of the
following:
$ sudo phc2sys -O 0 -i tsn0 -m
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
Note: Normally two instance of PHC2SYS will not run, but one process
should not break another.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f025759ba ]
Make sure that the PTP module is cleaned up if the igc_probe() fails by
calling igc_ptp_stop() on exit.
Fixes: d89f88419f ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26a3910afd ]
All functions in igc_ptp.c called from igc_main.c should check the
IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset
functions.
Fixes: 5f2958052c ("igc: Add basic skeleton for PTP")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd7f7328d6 ]
Move ktime_get_snapshot() into the loop. If a retry does occur, a more
recent snapshot will result in a more accurate cross-timestamp.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 714cd033da ]
The i225/i226 hardware retries if it receives an inappropriate response
from the upstream device. If the device retries too quickly, the root
port does not respond.
The wait between attempts was reduced from 10us to 1us in commit
6b8aa753a9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which
said:
With the 10us interval, we were seeing PTM transactions take around
12us. Hardware team suggested this interval could be lowered to 1us
which was confirmed with PCIe sniffer. With the 1us interval, PTM
dialogs took around 2us.
While a 1us short cycle time was thought to be theoretically sufficient, it
turns out in practice it is not quite long enough. It is unclear if the
problem is in the root port or an issue in i225/i226.
Increase the wait from 1us to 4us. Increasing to 2us appeared to work in
practice on the setups we have available. A value of 4us was chosen due to
the limited hardware available for testing, with a goal of ensuring we wait
long enough without overly penalizing the response time when unnecessary.
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
Fixes: 6b8aa753a9 ("igc: Decrease PTM short interval from 10 us to 1 us")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e404ad95d ]
Writing to clear the PTM status 'valid' bit while the PTM cycle is
triggered results in unreliable PTM operation. To fix this, clear the
PTM 'trigger' and status after each PTM transaction.
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not 0, but extremely reduced.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0937cb5f34 ]
This reverts commit a104042e2b.
Since the original bug seems to have been around for years,
but a new issue was report with the fix, revert the fix for
now. We have a couple of weeks to figure it out for this
release, if needed.
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/linux-wireless/20250410215527.3001-1-spasswolf@web.de
Fixes: a104042e2b ("wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 715ad3e0ec ]
Initializing a percpu variable with the address of a struct tagged as
.initdata is breaking the build with CONFIG_SECTION_MISMATCH_WARN_ONLY
not set to "y".
Fix that by using an access function instead returning the .initdata
struct address if the percpu space of the struct hasn't been
allocated yet.
Fixes: 368990a7fe ("xen: fix multicall debug data referencing")
Reported-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Tested-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250327190602.26015-1-jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe82469a0 ]
Commit 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list
of routes.") introduced a separated list for managing route expiration via
the GC timer.
However, it missed adding exception routes (created by ip6_rt_update_pmtu()
and rt6_do_redirect()) to this GC list. As a result, these exceptions were
never considered for expiration and removal, leading to stale entries
persisting in the routing table.
This patch fixes the issue by calling fib6_add_gc_list() in
rt6_insert_exception(), ensuring that exception routes are properly tracked
and garbage collected when expired.
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/837e7506ffb63f47faa2b05d9b85481aad28e1a4.1744134377.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 324dddea32 ]
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR'
Fixes: 26503ad25d ("Bluetooth: btrtl: split the device initialization into smaller parts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb73b5a915 ]
This fixes sending MGMT_EV_DEVICE_FOUND for invalid address
(00:00:00:00:00:00) which is a regression introduced by
a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
since in the attempt to skip storing data for extended advertisement it
actually made the code to skip the entire if statement supposed to send
MGMT_EV_DEVICE_FOUND without attempting to use the last_addr_adv which
is garanteed to be invalid for extended advertisement since we never
store anything on it.
Link: https://github.com/bluez/bluez/issues/1157
Link: https://github.com/bluez/bluez/issues/1149#issuecomment-2767215658
Fixes: a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fc7d2b5ca ]
Some of the manually selected jack configurations will disable the
headphone clamp override. Restore this on jack removal, such that
the state is consistent for a new insert.
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250409120717.1294528-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5458fcabd ]
ASUS platform Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Fixes: 7ab61d0a9a ("ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA")
Fixes: c86dd79a7c ("ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/0fe3421a6850461fb0b7012cb28ef71d@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c2fa44132 ]
It was reported that the headphone output on Dell Venue 11 Pro 7130
becomes mono after PM resume. The cause seems to be the BIOS setting
up the codec COEF 0x0d bit 0x40 wrongly by some reason, and restoring
the original value 0x2800 fixes the problem.
This patch adds the quirk entry to perform the COEF restore.
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219697
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1235686
Link: https://patch.msgid.link/20250130123301.8996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: b5458fcabd ("ALSA: hda/realtek - Fixed ASUS platform headset Mic issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7df7f909c ]
This hardware has ALC294 codec with speaker NID 0x17 and bass speaker
NID 0x15.
This patch removes DAC NID 0x06 (without volume control) from
the connection list for bass speaker NID 0x15. Both speaker PINs
are routed to DAC NID 0x03 with this change.
Link: https://github.com/alsa-project/alsa-ucm-conf/issues/467
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241128112145.3409492-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: b5458fcabd ("ALSA: hda/realtek - Fixed ASUS platform headset Mic issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9c7fa025d ]
Depend on SND_HDA_CIRRUS_SCODEC and GPIOLIB instead of selecting them.
KUNIT_ALL_TESTS should only build tests that have satisfied dependencies
and test components that are already being built. It must not cause
other stuff to be added to the build.
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250409114520.914079-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9beb2c91fb ]
Set maximum DMA segment size to 2G instead of UINT_MAX due to HW limit.
Fixes: e0477b34d9 ("RDMA: Explicitly pass in the dma_device to ib_register_device")
Link: https://patch.msgid.link/r/20250327114724.3454268-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
