mn10300 uses an mmio-driven uart. This is not supported by speakup, so
prevent from enabling it.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When all callchains of a hist entry is percent-limited, do not add a
blank line at the end. It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes a merge issue with the panel driver, and picks up fixes in
iio and other drivers that we want here.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report --no-children --percent-limit 0.01 --tui
...
- 0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
- vm_mmap_pgoff
+ 0.02% sys_mmap_pgoff
+ 0.02% vm_mmap
+ 0.02% mprotect_fixup
Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.
Before:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- mmap_region
do_mmap_pgoff
vm_mmap_pgoff
After:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
vm_mmap_pgoff
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass parent node's total period to callchain print functions. This info
is needed by later patch to determine whether it can omit percent or not
correctly.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bluetooth is only supported when network support is part of the kernel,
so it is a bit pointless to build the tosa-bt support without networking.
If we try anyway, we get a Kconfig warning:
warning: (TOSA_BT && H1940BT) selects RFKILL which has unmet direct dependencies (NET)
This adds a dependency on CONFIG_NET to avoid that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.
To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_IWMMXT, the pxa3xx and pxa27x suspend/resume code
emits some xscale specific instructions, which are rejected
by the assembler, because gcc is built with -march=armv5
-mtune=xscale and passes that option to the assembler:
/tmp/cciHumzr.s:553: Error: selected processor does not support ARM mode `mra r2,r3,acc0'
/tmp/cciHumzr.s:605: Error: selected processor does not support ARM mode `mar acc0,r2,r3'
make[3]: *** [arch/arm/mach-pxa/pxa3xx.o] Error 1
/tmp/cci5MUNu.s:326: Error: selected processor does not support ARM mode `mra r2,r3,acc0'
/tmp/cci5MUNu.s:367: Error: selected processor does not support ARM mode `mar acc0,r2,r3'
make[3]: *** [arch/arm/mach-pxa/pxa27x.o] Error 1
Overriding with -Wa,-march=xscale no longer works, so instead
I'm adding an explict ".arch_extension" directive in all four inline
assembly statements, which should work even if they end up in a different
order in the assembly output.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
When CONFIG_IWMMXT is disabled, we get a warning in pxa3xx.c:
arch/arm/mach-pxa/pxa3xx.c: In function 'pxa3xx_cpu_pm_suspend':
arch/arm/mach-pxa/pxa3xx.c:109:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
It turns out that there is an 'extern' declaration in the
middle of a function.
For consistency, this moves the declaration and two others from
the same file into pm.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
When all boards are disabled on PXA, we cannot build a kernel
because no CPU gets selected:
arch/arm/include/uapi/asm/swab.h:26:29: error: "__LINUX_ARM_ARCH__" is not defined [-Werror=undef]
This is a bit annoying for compile-testing, so I'm adding a line
that ensures that at all times, at least one of CPU_XSCALE or
CPU_XSC3 is set and we can at least continue building.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
GPIO_SYSFS is a common kernel functionality, not something
that a board specific Kconfig should have to worry about.
In MIOA701, we get a warning about the select when CONFIG_SYSFS
is disabled:
warning: (MACH_MIOA701) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS)
This just removes the select and instead enables the symbol in
the defconfig file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Two variables in eseries.c are used on multiple platforms,
but are not referenced when those are all disabled:
eseries.c:60:31: warning: 'e7xx_gpio_vbus' defined but not used [-Wunused-variable]
eseries.c:129:20: warning: 'eseries_register_clks' defined but not used [-Wunused-function]
Marking them __maybe_unused is the nicest way to ensure
that we never get the warning or end up with missing symbols
if we get it wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This function is only used when CONFIG_PCMCIA is enabled, otherwise
we get a harmless warning:
arch/arm/mach-pxa/spitz.c:204:13: warning: 'spitz_card_pwr_ctrl' defined but not used [-Wunused-function]
Marking it as __maybe_unused keeps the logic simple and avoids the
warning on randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
We should not dereference registers as pointers, so use readl/writel
instead for these registers.
The clock registers are accessed in multiple files, so we have to
change them all at once.
I stumbled over these registers while looking at something unrelated.
There are in fact other registers with the same problem, but I did
not try to address those at this point.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report -s comm --percent-limit 0.01 --stdio
...
9.95% swapper
|
|--7.57%--intel_idle
| cpuidle_enter_state
| cpuidle_enter
| call_cpuidle
| cpu_startup_entry
| |
| |--4.89%--start_secondary
| |
| --2.68%--rest_init
| start_kernel
| x86_64_start_reservations
| x86_64_start_kernel
|
|--0.15%--__schedule
| |
| |--0.13%--schedule
| | schedule_preempt_disable
| | cpu_startup_entry
| | |
| | |--0.09%--start_secondary
| | |
| | --0.04%--rest_init
| | start_kernel
| | x86_64_start_reservations
| | x86_64_start_kernel
| |
| --0.01%--schedule_preempt_disabled
| cpu_startup_entry
...
Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.
Before:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
--7.57%--intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass hist entry's period to graph callchain print function. This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
assembly fixes, the other things are mostly board related:
- A series of omap assembly code fixes to fix issues with rodata with
ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
which is bad. The fix in most cases is to load the value from data
section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
DEBUG_RODATA gets selected by default. And while testing things,
I also added few more loadable driver modules to the defconfig that
I seem to need quite often.
- Fix a long standing omap5 RTC mystery and enable RTC where we need
to ensure the SoC msecure pin is high so we can write to the RTC
registers.
- Fix irq types for am437x
- A series of minor dts fixes for sbc-am57x and cl-som-am57x
- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
i2c rate entry
This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:
- Remove legacy mailbox platform data that is no longer needed
- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
people can use it
- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver
- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
initramfs quite a bit smaller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NqvQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:
- A series of omap assembly code fixes to fix issues with rodata with
ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
which is bad. The fix in most cases is to load the value from data
section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
DEBUG_RODATA gets selected by default. And while testing things,
I also added few more loadable driver modules to the defconfig that
I seem to need quite often.
- Fix a long standing omap5 RTC mystery and enable RTC where we need
to ensure the SoC msecure pin is high so we can write to the RTC
registers.
- Fix irq types for am437x
- A series of minor dts fixes for sbc-am57x and cl-som-am57x
- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
i2c rate entry
This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:
- Remove legacy mailbox platform data that is no longer needed
- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
people can use it
- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver
- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
initramfs quite a bit smaller
* tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
ARM: dts: am4372: fix irq type for arm twd and global timer
ARM: dts: Fix wl12xx missing clocks that cause hangs
ARM: OMAP: Add PWM dmtimer platform data quirks
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
ARM: OMAP2+: Fix l2_inv_api_params for rodata
ARM: OMAP2+: Fix save_secure_ram_context for rodata
ARM: OMAP2+: Fix l2dis_3630 for rodata
ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
ARM: OMAP2+: Remove legacy mailbox device instantiation
ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- sama5d4: error in DBGU index
- addition of phy properties in several boards
- at91sam9n12ek fix a panel compatible string
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJWqdjFAAoJEAf03oE53VmQG30H/R9luD6d9ebmhaOE7ay40HAy
RrG8wtRQ/zgxf37SntoJxyVxxXWsDsb7sOR1LRXiT7FEGWr3Eip7B1uwmasC8pky
ich2Yj5pGVUH+qscm26GDGyHbNwIrFOQyl1t/R6upVpITlXa0bpaEIXx3RejH8PN
Wk4pMZg/4OkUXlcmYNU0Rz8ban8GfJ428bkLxMKeUXUAjvevNlWqTvOqC+QIrzUC
w3iDoXfhc81sqrOzBzW44H28g7rh//d3TAfzMbM1BJti880QkP+CksG5qHvogI5f
olN4+9QmV9tLXOr2K6iUkM8dwzHYW/3PPBR1CHODjSLP0rQ2Assy+DPxyO64Rtk=
=jJrB
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
- addition of phy properties in several boards
- at91sam9n12ek fix a panel compatible string
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
ARM: dts: at91: at91sam9n12ek: fix panel compatible string
ARM: dts: at91: sama5d4: fix instance id of DBGU
Signed-off-by: Olof Johansson <olof@lixom.net>
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key. But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The NVIDIA bootloader, nvtboot, expects the "chosen" node to be present
in the device-tree blob and if it is not then it fails to boot the kernel.
Add the chosen node so we can boot the kernel on Tegra132 Norrin with the
nvtboot bootloader.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This platform recently moved to multi-platform, so missed the global
fixup by commit e324654294 ("ARM: use "depends on" for SoC configs
instead of "if" after prompt"). Fix it now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This platform was recently added, so missed the global fixup by
commit e324654294 ("ARM: use "depends on" for SoC configs instead
of "if" after prompt"). Fix it now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations"). So fix it now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations"). So fix it now.
Also, add missing "static" qualifier.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
At first, commit 4b7f48d395 ("bus: uniphier-system-bus: add UniPhier
System Bus driver") introduced this driver as a tristate one.
Then, commit 326ea45aa8 ("bus: uniphier: allow only built-in
driver") temporarily made it boolean in order to fix a link error
in case it is compiled as a module.
The root cause was fixed by commit b80443c221 ("of/platform: export
of_default_bus_match_table").
Now this driver can really be a module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Wall time obtained from ktime_get_real_ns is susceptible to sudden jumps due to
user setting the time or due to NTP. Boot time is constantly increasing time
better suited for comparing two timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Reviewed-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently --percent-limit option only works for hist entries. However
it'd be better to have same effect to callchains as well
Requested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unfortunately we don't know all panels and platforms out there and we
found internal prototypes without VBT proper set but where only
link in standby worked well.
So, before enable PSR by default let's instrument the PSR parameter
in a way that we can identify different panels out there that might
require or work better with link standby mode.
It is also useful to say that for backward compatibility I'm not
changing the meaning of this flag. So "0" still means disabled
and "1" means enabled with full support and maximum power savings.
v2: Use positive value instead of negative for different operation mode
as suggested by Daniel.
v3: As Paulo suggested use 2 to force link standby and 3 to force link
fully on. Also split the link_standby introduction in a separated patch.
v4: Use DRM_ERROR for link off request on platforms that don't support and
Remove the quirk promise.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454356928-19779-1-git-send-email-rodrigo.vivi@intel.com
Link standby support has been deprecated with 'commit 89251b177
("drm/i915: PSR: deprecate link_standby support for core platforms.")'
The reason for that is that main link in full off offers more power
savings and on HSW and BDW implementations on source side had known
bugs with link standby.
However that same HSD report only mentions BDW and HSW and tells that
a fix was going to new platforms. Since on Skylake link standby
didn't cause the bad blank flickering screens seen on HSW and BDW
let's respect VBT again for this and future platforms.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Current code not just block link_standby for non DDI platforms but also
block PSR from work on other ports B/C/D/E.
So, besides change any behaviour let's just fix the mess a bit here and
reuse HSW check to block the other ports and reduce the second if only to
link stadnby request.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
The original documentation as submitted with the driver appears to have
dropped down a rabbit hole.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently the hist entry addition path doesn't update total_period of
hists and it's calculated during 'resort' path. But the resort path
needs to know the total period before doing its job because it's used
for calculating percent limit of callchains in hist entries.
So this patch update the total period during the addition path. It
makes the percent limit of callchains working (again).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The total period should be get using hists__total_period() since it
takes filtered entries into account. In addition, if callchain mode is
'fractal', the total period should be the entry's period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing the NO_IRQ macro with 0. If there is no interrupt,
returned value will be 0 regardless of what NO_IRQ is defined.
Signed-off-by: Raghav Dogra <raghav@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
In subpagesize-blocksize scenario, the "destination offset" argument passed to
the btrfs_ioctl_clone() can be aligned to sectorsize but may not be
necessarily aligned to the machine's page size. In such cases,
truncate_inode_pages_range() ends up zeroing out the partial page and future
read operations will return incorrect data. Hence this commit explicitly
rounds down the "destination offset" to the machine's page size.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When extending a file by either "truncate up" or by writing beyond i_size, the
page which had i_size needs to be marked "read only" so that future writes to
the page via mmap interface causes btrfs_page_mkwrite() to be invoked. If not,
a write performed after extending the file via the mmap interface will find
the page to be writaeable and continue writing to the page without invoking
btrfs_page_mkwrite() i.e. we end up writing to a file without reserving disk
space.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_getattr() returns PAGE_CACHE_SIZE as the block size. Since
generic_fillattr() already does the right thing (by obtaining block size
from inode->i_blkbits), just remove the statement from btrfs_getattr.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
cow_file_range_inline() limits the size of an inline extent to
PAGE_CACHE_SIZE. This breaks in subpagesize-blocksize scenarios. Fix this by
comparing against root->sectorsize.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario, map_length can be less than the length of a
bio vector. Such a condition may cause btrfs_submit_direct_hook() to submit a
zero length bio. Fix this by comparing map_length against block size rather
than with bv_len.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize a page can map multiple extent buffers and hence
using (page index, seq) as the search key is incorrect. For example, searching
through tree modification log tree can return an entry associated with the
first extent buffer mapped by the page (if such an entry exists), when we are
actually searching for entries associated with extent buffers that are mapped
at position 2 or more in the page.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario it is not sufficient to search using the
first byte of the page to make sure that there are no ordered extents
present across the page. Fix this.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario, if i_size occurs in a block which is not
the last block in the page, then the space to be reserved should be calculated
appropriately.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While at it, this commit changes btrfs_truncate_page() to truncate sectorsized
blocks instead of pages. Hence the function has been renamed to
btrfs_truncate_block().
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The direct I/O read's endio and corresponding repair functions work on
page sized blocks. This commit adds the ability for direct I/O read to work on
subpagesized blocks.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Checksums are applicable to sectorsize units. The current code uses
bio->bv_len units to compute and look up checksums. This works on machines
where sectorsize == PAGE_SIZE. This patch makes the checksum computation and
look up code to work with sectorsize units.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the code reserves/releases extents in multiples of PAGE_CACHE_SIZE
units. Fix this by doing reservation/releases in block size units.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
