[ Upstream commit d0bf7cd5df ]
In the __arch_prepare_bpf_trampoline() function, retval_off is only
meaningful when save_ret is true, so the current logic is correct.
However, in the original logic, retval_off is only initialized under
certain conditions; for example, in the fmod_ret logic, the compiler is
not aware that the flags of the fmod_ret program (prog) have set
BPF_TRAMP_F_CALL_ORIG, which results in an uninitialized symbol
compilation warning.
So initialize retval_off unconditionally to fix it.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20250922062244.822937-2-duanchenghao@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d726c4dbe ]
Following deadlock can be triggered easily by lockdep:
WARNING: possible circular locking dependency detected
6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted
------------------------------------------------------
check/1334 is trying to acquire lock:
ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180
but task is already holding lock:
ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
blk_queue_enter+0x40b/0x470
blkg_conf_prep+0x7b/0x3c0
tg_set_limit+0x10a/0x3e0
cgroup_file_write+0xc6/0x420
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}:
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
wbt_init+0x17e/0x280
wbt_enable_default+0xe9/0x140
blk_register_queue+0x1da/0x2e0
__add_disk+0x38c/0x5d0
add_disk_fwnode+0x89/0x250
device_add_disk+0x18/0x30
virtblk_probe+0x13a3/0x1800
virtio_dev_probe+0x389/0x610
really_probe+0x136/0x620
__driver_probe_device+0xb3/0x230
driver_probe_device+0x2f/0xe0
__driver_attach+0x158/0x250
bus_for_each_dev+0xa9/0x130
driver_attach+0x26/0x40
bus_add_driver+0x178/0x3d0
driver_register+0x7d/0x1c0
__register_virtio_driver+0x2c/0x60
virtio_blk_init+0x6f/0xe0
do_one_initcall+0x94/0x540
kernel_init_freeable+0x56a/0x7b0
kernel_init+0x2b/0x270
ret_from_fork+0x268/0x4c0
ret_from_fork_asm+0x1a/0x30
-> #0 (&q->sysfs_lock){+.+.}-{4:4}:
__lock_acquire+0x1835/0x2940
lock_acquire+0xf9/0x450
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
blk_unregister_queue+0x53/0x180
__del_gendisk+0x226/0x690
del_gendisk+0xba/0x110
sd_remove+0x49/0xb0 [sd_mod]
device_remove+0x87/0xb0
device_release_driver_internal+0x11e/0x230
device_release_driver+0x1a/0x30
bus_remove_device+0x14d/0x220
device_del+0x1e1/0x5a0
__scsi_remove_device+0x1ff/0x2f0
scsi_remove_device+0x37/0x60
sdev_store_delete+0x77/0x100
dev_attr_store+0x1f/0x40
sysfs_kf_write+0x65/0x90
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->q_usage_counter(queue)#3);
lock(&q->rq_qos_mutex);
lock(&q->q_usage_counter(queue)#3);
lock(&q->sysfs_lock);
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c445bffbf2 ]
During normal operation the timers are reprogrammed including an
interrupt acknowledgement. This has no effect as the whole timer
is setup from scratch afterwards. Especially in an interrupt this
has already been done by rttm_timer_interrupt().
Change the behaviour as follows:
- Use rttm_disable_timer() during reprogramming
- Keep rttm_stop_timer() for all other use cases.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-4-markus.stockhausen@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7a2510633 ]
The OpenWrt distribution has switched from kernel longterm 6.6 to
6.12. Reports show that devices with the Realtek Otto switch platform
die during operation and are rebooted by the watchdog. Sorting out
other possible reasons the Otto timer is to blame. The platform
currently consists of 4 targets with different hardware revisions.
It is not 100% clear which devices and revisions are affected.
Analysis shows:
A more aggressive sched/deadline handling leads to more timer starts
with small intervals. This increases the bug chances. See
https://marc.info/?l=linux-kernel&m=175276556023276&w=2
Focusing on the real issue a hardware limitation on some devices was
found. There is a minimal chance that a timer ends without firing an
interrupt if it is reprogrammed within the 5us before its expiration
time. Work around this issue by introducing a bounce() function. It
restarts the timer directly before the normal restart functions as
follows:
- Stop timer
- Restart timer with a slow frequency.
- Target time will be >5us
- The subsequent normal restart is outside the critical window
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-2-markus.stockhausen@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b781f527d ]
The driver uses the raw_readl() and raw_writel() functions. Those are
not for MMIO devices. Replace them with readl() and writel()
[ dlezcano: Fixed typo in the subject s/reald/readl/ ]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250804152344.1109310-2-daniel.lezcano@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d330fe541 ]
The Microsoft Serial Port Console Redirection (SPCR) specification
revision 1.09 comprises additional field: Precise Baud Rate [1].
It is used to describe non-traditional baud rates (such as those
used by high-speed UARTs).
It contains a specific non-zero baud rate which overrides the value
of the Configured Baud Rate field. If this field is zero or not
present, Configured Baud Rate is used.
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table [1]
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Link: https://patch.msgid.link/20250913070815.16758-1-cp0613@linux.alibaba.com
[ rjw: Corrected typo in the subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad4728740b ]
On RZ/G3E using PSCI, s2ram powers down the SoC. After resume,
reinitialize the hardware for SPI operations.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250921112649.104516-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3835a4410 ]
Some ublk selftests have strange behavior when fio is not installed.
While most tests behave correctly (run if they don't need fio, or skip
if they need fio), the following tests have different behavior:
- test_null_01, test_null_02, test_generic_01, test_generic_02, and
test_generic_12 try to run fio without checking if it exists first,
and fail on any failure of the fio command (including "fio command
not found"). So these tests fail when they should skip.
- test_stress_05 runs fio without checking if it exists first, but
doesn't fail on fio command failure. This test passes, but that pass
is misleading as the test doesn't do anything useful without fio
installed. So this test passes when it should skip.
Fix these issues by adding _have_program fio checks to the top of all of
these tests.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b54082c3e ]
sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()
to check if the calling task is allowed to access another task's
robust_list pointer. This check is racy against a concurrent exec() in the
target process.
During exec(), a task may transition from a non-privileged binary to a
privileged one (e.g., setuid binary) and its credentials/memory mappings
may change. If get_robust_list() performs ptrace_may_access() before
this transition, it may erroneously allow access to sensitive information
after the target becomes privileged.
A racy access allows an attacker to exploit a window during which
ptrace_may_access() passes before a target process transitions to a
privileged state via exec().
For example, consider a non-privileged task T that is about to execute a
setuid-root binary. An attacker task A calls get_robust_list(T) while T
is still unprivileged. Since ptrace_may_access() checks permissions
based on current credentials, it succeeds. However, if T begins exec
immediately afterwards, it becomes privileged and may change its memory
mappings. Because get_robust_list() proceeds to access T->robust_list
without synchronizing with exec() it may read user-space pointers from a
now-privileged process.
This violates the intended post-exec access restrictions and could
expose sensitive memory addresses or be used as a primitive in a larger
exploit chain. Consequently, the race can lead to unauthorized
disclosure of information across privilege boundaries and poses a
potential security risk.
Take a read lock on signal->exec_update_lock prior to invoking
ptrace_may_access() and accessing the robust_list/compat_robust_list.
This ensures that the target task's exec state remains stable during the
check, allowing for consistent and synchronized validation of
credentials.
Suggested-by: Jann Horn <jann@thejh.net>
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-fsdevel/1477863998-3298-5-git-send-email-jann@thejh.net/
Link: https://github.com/KSPP/linux/issues/119
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b1b796117 ]
Refuse to register a cpuidle device if the given CPU has a cpuidle
device already and print a message regarding it.
Without this, an attempt to register a new cpuidle device without
unregistering the existing one leads to the removal of the existing
cpuidle device without removing its sysfs interface.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5612ea8b55 ]
This fixes the build with -Werror -Wall.
btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
71 | info.func_info = ptr_to_u64(&finfo);
| ^~~~~
prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2294 | info.func_info = ptr_to_u64(&func_info);
|
v2:
- Initialize instead of using memset.
Signed-off-by: Tom Stellard <tstellar@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250917183847.318163-1-tstellar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41307ec7df ]
The X1E80100 battery management firmware sends a notification with
code 0x83 when the battery charging state changes, such as switching
between fast charge, taper charge, end of charge, or any other error
charging states.
The same notification code is used with bit[8] set when charging stops
because the charge control end threshold is reached. Additionally,
a 2-bit value is included in bit[10:9] with the same code to indicate
the charging source capability, which is determined by the calculated
power from voltage and current readings from PDOs: 2 means a strong
charger over 60W, 1 indicates a weak charger, and 0 means there is no
charging source.
These 3-MSB [10:8] in the notification code is not much useful for now,
hence just ignore them and trigger a power supply change event whenever
0x83 notification code is received. This helps to eliminate the unknown
notification error messages.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/all/r65idyc4of5obo6untebw4iqfj2zteiggnnzabrqtlcinvtddx@xc4aig5abesu/
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 442816f97a ]
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57b100d4cf ]
The cpupower_write_sysfs() function currently returns -1 on
write failure, but the function signature indicates it should
return an unsigned int. Returning -1 from an unsigned function
results in a large positive value rather than indicating
an error condition.
Fix this by returning 0 on failure, which is more appropriate
for an unsigned return type and maintains consistency with typical
success/failure semantics where 0 indicates failure and non-zero
indicates success (bytes written).
Link: https://lore.kernel.org/r/20250828063000.803229-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7ae46b454 ]
Add a warning if io_populate_area_dma() can't fill in all net_iovs, it
should never happen.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e163f3d7 ]
Add shutdown handler to the Synopsys DesignWare I3C master driver,
ensuring the device is gracefully disabled during system shutdown.
The shutdown handler cancels any pending hot-join work and disables
interrupts.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Link: https://lore.kernel.org/r/20250730151207.4113708-1-manikanta.guntupalli@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07c7efda24 ]
According to LP8556 datasheet EPROM region starts at 0x98 so adjust value
in the driver accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250909074304.92135-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c652dc4419 ]
The `kunit_test` proc macro only checks for the `test` attribute
immediately preceding a `fn`. If the function is disabled via a `cfg`,
the generated code would result in a compile error referencing a
non-existent function [1].
This collects attributes and specifically cherry-picks `cfg` attributes
to be duplicated inside KUnit wrapper functions such that a test function
disabled via `cfg` compiles and is marked as skipped in KUnit correctly.
Link: https://lore.kernel.org/r/20250916021259.115578-1-ent3rm4n@gmail.com
Link: https://lore.kernel.org/rust-for-linux/CANiq72==48=69hYiDo1321pCzgn_n1_jg=ez5UYXX91c+g5JVQ@mail.gmail.com/ [1]
Closes: https://github.com/Rust-for-Linux/linux/issues/1185
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Suggested-by: David Gow <davidgow@google.com>
Signed-off-by: Kaibo Ma <ent3rm4n@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c89513395 ]
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250915032618.1551762-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9d4e9f0e8 ]
For systems having CONFIG_NR_CPUS set to > 1024 in kernel config
the selftest fails as arena_spin_lock_irqsave() returns EOPNOTSUPP.
(eg - incase of powerpc default value for CONFIG_NR_CPUS is 8192)
The selftest is skipped incase bpf program returns EOPNOTSUPP,
with a descriptive message logged.
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250913091337.1841916-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 031cdd3bc3 ]
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 891cdbb162 ]
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/u4ttvhnn7lark5w3sgrbuy2rxupcvosp4qmvj46nwzgeo5ausc@uyrkdls2muwx
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2537be4f8 ]
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/rsdinhafrtlguauhesmrrzkybpnvwantwmyfq2ih5aregghax5@mhr7v3eryci3/
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dbcd5a9ab ]
A TEE driver doesn't always need to provide a pool if it doesn't
support memory sharing ioctls and can allocate memory for TEE
messages in another way. Although this is mentioned in the
documentation for tee_device_alloc(), it is not handled correctly.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dff11a7a ]
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: 53fc0220
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b68ca543 ]
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 037e496038 ]
The second silicon revision for the AM62L was mainly a ROM revision
and therefore this silicon revision is labeled SR1.1
Add a new decode array to properly identify this revision as SR1.1
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20250908-62l-chipid-v1-1-9c7194148140@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cc9a8cada ]
When SHM bridge is enabled, assigning RMTFS memory causes the calling
core to hang if the system is running in EL1.
Disable SHM bridge on sc7180 devices to avoid that hang.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 767ecf9da7 ]
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/85a70cb014ec1f07972fccb60b875596eeaa6b5c.1756799774.git.michal.simek@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f3cfb7943 ]
IO time is considered busy by default for modern Intel processors. The
current check covers recent Family 6 models but excludes the brand new
Families 18 and 19.
According to Arjan van de Ven, the model check was mainly due to a lack
of testing on systems before INTEL_CORE2_MEROM. He suggests considering
all Intel processors as having an efficient idle.
Extend the IO busy classification to all Intel processors starting with
Family 6, including Family 15 (Pentium 4s) and upcoming Families 18/19.
Use an x86 VFM check and move the function to the header file to avoid
using arch-specific #ifdefs in the C file.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://patch.msgid.link/20250908230655.2562440-1-sohil.mehta@intel.com
[ rjw: Added empty line after #include ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c33c43f71b ]
On certain Loongson platforms, drivers attempting to request a legacy
ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The
virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.
This issue does not affect ACPI-enumerated devices described in DSDT,
as their interrupts are properly mapped via the GSI translation path.
This indicates the LPC irqdomain itself is functional but is not correctly
handling direct VIRQ-to-HWIRQ mappings.
The root cause is the use of irq_domain_create_linear(). This API sets
up a domain for dynamic, on-demand mapping, typically triggered by a GSI
request. It does not pre-populate the mappings for the legacy VIRQ range
(0-15). Consequently, if no ACPI device claims a specific GSI
(e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to
the LPC domain. A direct call to request_irq(4, ...) then fails because
the kernel cannot resolve this VIRQ to a hardware interrupt managed by
the LPC controller.
The PCH-LPC interrupt controller is an i8259-compatible legacy device
that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to
support legacy drivers.
Fix this by replacing irq_domain_create_linear() with
irq_domain_create_legacy(). This API is specifically designed for such
controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ
mapping for the entire legacy range (0-15) immediately upon domain
creation. This ensures that any VIRQ in this range is always resolvable,
making direct calls to request_irq() for legacy IRQs function correctly.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fec2e70572 ]
We're already iterating every segment, so check these for a valid IO
lengths at the same time. Individual segment lengths will not be checked
on passthrough commands. The read/write command segments must be sized
to the dma alignment.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f85981327a ]
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250909124721.191555-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f076a453f ]
io_ring_ctx's enabled with IORING_SETUP_SINGLE_ISSUER are only allowed
a single task submitting to the ctx. Although the documentation only
mentions this restriction applying to io_uring_enter() syscalls,
commit d7cce96c44 ("io_uring: limit registration w/ SINGLE_ISSUER")
extends it to io_uring_register(). Ensuring only one task interacts
with the io_ring_ctx will be important to allow this task to avoid
taking the uring_lock.
There is, however, one gap in these checks: io_register_clone_buffers()
may take the uring_lock on a second (source) io_ring_ctx, but
__io_uring_register() only checks the current thread against the
*destination* io_ring_ctx's submitter_task. Fail the
IORING_REGISTER_CLONE_BUFFERS with -EEXIST if the source io_ring_ctx has
a registered submitter_task other than the current task.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aae7a2876c ]
Unlike all the other allocations in this driver, the memory for storing
the pin function descriptions allocated with kcalloc() and later resized
with krealloc() is never freed. Use devres like elsewhere to handle
that. While at it - replace krealloc() with more suitable
devm_krealloc_array().
Note: the logic in this module is pretty convoluted and could probably
use some revisiting, we should probably be able to calculate the exact
amount of memory needed in advance or even skip the allocation
altogether and just add each function to the radix tree separately.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 837afa592c ]
Renesas RZ/G3E supports a power-saving mode where power to most of the
SoC components is lost, including the PIN controller. Save and restore
the Schmitt control register contents to ensure the functionality is
preserved after a suspend/resume cycle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250819084022.20512-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9d61f1da3 ]
Many AMD CPUs can support this feature now. We would get a wrong CPU DIE
temperature if don't consider this. In low-temperature environments,
the CPU die temperature can drop below zero. So many platforms would like
to make extended temperature range as their default configuration.
Default temperature range (0C to 255.875C).
Extended temperature range (-49C to +206.875C).
Ref Doc: AMD V3000 PPR (Doc ID #56558).
Signed-off-by: Chuande Chen <chuachen@cisco.com>
Link: https://lore.kernel.org/r/20250814053940.96764-1-chenchuande@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c056ac85 ]
This fixes differences for the P8 system that was initially set to
the same thermal values as the P7, also adds in the PSU sensor for
all of the supported systems
Signed-off-by: David Ober <dober@lenovo.com>
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20250807103228.10465-1-dober6023@gmail.com
[groeck: Update subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d1e313d7 ]
The device ID of Strix Halo Data Fabric Function 3 has been in the tree
since commit 0e640f0a47 ("x86/amd_nb: Add new PCI IDs for AMD family
0x1a"), but is somehow missing from k10temp_id_table.
Add it so that it works out of the box.
Tested on Beelink GTR9 Pro Mini PC.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
