[ Upstream commit 160c826b4d ]
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eae4a916f ]
The spi_controller_is_target() check is missing for pm_runtime_disable()
in cdns_spi_remove(), add it.
Fixes: b1b90514ea ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d4a70faa ]
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: d36ccd9f7e ("spi: cadence: Runtime pm adaptation")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f64b1600f9 ]
Since commit 7ef9651e97 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230823133938.1359106-9-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 67d4a70faa ("spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6e05ba084 ]
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 43b6bf406c ("spi: imx: fix runtime pm support for !CONFIG_PM")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f04e2ad394 ]
When netfilter has no entry to display, qsort is called with
qsort(NULL, 0, ...). This results in undefined behavior, as UBSan
reports:
net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null
Although the C standard does not explicitly state whether calling qsort
with a NULL pointer when the size is 0 constitutes undefined behavior,
Section 7.1.4 of the C standard (Use of library functions) mentions:
"Each of the following statements applies unless explicitly stated
otherwise in the detailed descriptions that follow: If an argument to a
function has an invalid value (such as a value outside the domain of
the function, or a pointer outside the address space of the program, or
a null pointer, or a pointer to non-modifiable storage when the
corresponding parameter is not const-qualified) or a type (after
promotion) not expected by a function with variable number of
arguments, the behavior is undefined."
To avoid this, add an early return when nf_link_info is NULL to prevent
calling qsort with a NULL pointer.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240910150207.3179306-1-visitorckw@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9d43eace ]
When direct I/O completions invalidates the page cache it holds neither the
i_rwsem nor the invalidate_lock so it can be racing with
iomap_write_delalloc_release. If the search for the end of the region that
contains data returns the start offset we hit such a race and just need to
look for the end of the newly created hole instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cdc0e4ce5 ]
Replace shifts of '1' with '1U' in bitwise operations within
__show_dev_tc_bpf() to prevent undefined behavior caused by shifting
into the sign bit of a signed integer. By using '1U', the operations
are explicitly performed on unsigned integers, avoiding potential
integer overflow or sign-related issues.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240908140009.3149781-1-visitorckw@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc749e61c0 ]
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Co-developed-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru
Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e2524ba2c ]
In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:
ext4_split_extent
path = *ppath;
ext4_split_extent_at(ppath)
path = ext4_find_extent(ppath)
ext4_split_extent_at(ppath)
// ext4_find_extent fails to free path
// but zeroout succeeds
ext4_ext_show_leaf(inode, path)
eh = path[depth].p_hdr
// path use-after-free !!!
Similar to ext4_split_extent_at(), we use *ppath directly as an input to
ext4_ext_show_leaf(). Fix a spelling error by the way.
Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only
used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.
This issue is triggered only when EXT_DEBUG is defined and therefore does
not affect functionality.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd69f8f9de ]
ext4_search_dir currently returns -1 in case of a failure, while it returns
0 when the name is not found. In such failure cases, it should return an
error code instead.
This becomes even more important when ext4_find_inline_entry returns an
error code as well in the next commit.
-EFSCORRUPTED seems appropriate as such error code as these failures would
be caused by unexpected record lengths and is in line with other instances
of ext4_check_dir_entry failures.
In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was
left as is to reduce the risk of regressions.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-2-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cc8c50c9a ]
Currently we cannot pass the pointer returned by iter next method as
argument to KF_TRUSTED_ARGS or KF_RCU kfuncs, because the pointer
returned by iter next method is not "valid".
This patch sets the pointer returned by iter next method to be valid.
This is based on the fact that if the iterator is implemented correctly,
then the pointer returned from the iter next method should be valid.
This does not make NULL pointer valid. If the iter next method has
KF_RET_NULL flag, then the verifier will ask the ebpf program to
check NULL pointer.
KF_RCU_PROTECTED iterator is a special case, the pointer returned by
iter next method should only be valid within RCU critical section,
so it should be with MEM_RCU, not PTR_TRUSTED.
Another special case is bpf_iter_num_next, which returns a pointer with
base type PTR_TO_MEM. PTR_TO_MEM should not be combined with type flag
PTR_TRUSTED (PTR_TO_MEM already means the pointer is valid).
The pointer returned by iter next method of other types of iterators
is with PTR_TRUSTED.
In addition, this patch adds get_iter_from_state to help us get the
current iterator from the current state.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB584869F8B448EA1C87B7CDA399962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee426bfb9d ]
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9dca21570 ]
While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed'
warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify()
at probe time to get the initial tablet-mode-switch state and the key-code
lenovo_ymc_notify() reads from the firmware is not initialized at probe
time yet on the Lenovo 14ARB7.
The hardware/firmware does an ACPI notify on the WMI device itself when
it initializes the tablet-mode-switch state later on.
Add 0x0 YMC state to the sparse keymap to silence the warning.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.1724340562.git.soyer@irl.hu
[hdegoede@redhat.com: Reword commit message]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b76e0d4215 ]
_be32 type is defined for some elements in pseries_hp_errorlog
struct but also used them u32 after be32_to_cpu() conversion.
Example: In handle_dlpar_errorlog()
hp_elog->_drc_u.drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
And later assigned to u32 type
dlpar_cpu() - u32 drc_index = hp_elog->_drc_u.drc_index;
This incorrect usage is giving the following warnings and the
patch resolve these warnings with the correct assignment.
arch/powerpc/platforms/pseries/dlpar.c:398:53: sparse: sparse:
incorrect type in argument 1 (different base types) @@
expected unsigned int [usertype] drc_index @@
got restricted __be32 [usertype] drc_index @@
...
arch/powerpc/platforms/pseries/dlpar.c:418:43: sparse: sparse:
incorrect type in assignment (different base types) @@
expected restricted __be32 [usertype] drc_count @@
got unsigned int [usertype] @@
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408182142.wuIKqYae-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202408182302.o7QRO45S-lkp@intel.com/
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
v3:
- Fix warnings from using incorrect data types in pseries_hp_errorlog
struct
v2:
- Remove pr_info() and TODO comments
- Update more information in the commit logs
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822025028.938332-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39ab331ab5 ]
Replace two open-coded calculations of the buffer size by invocations of
sizeof() on the buffer itself, to make sure the code will always use the
actual buffer size.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.1724156125.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e823f3070 ]
Register access from userspace should be blocked until
reset is complete.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6dbab4632 ]
With -Werror:
In function ‘r100_cp_init_microcode’,
inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7:
include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
| ^
include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’
437 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~~~~
include/linux/printk.h:508:9: note: in expansion of macro ‘printk’
508 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~
drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’
1062 | pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name);
| ^~~~~~
Fix this by converting the if/else if/... construct into a proper
switch() statement with a default to handle the error case.
As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0
targeting arm32).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c71065df2 ]
Following an incomplete transfer in MSG IN phase, the driver would not
notice the problem and would make use of invalid data. Initialize 'tmp'
appropriately and bail out if no message was received. For STATUS phase,
preserve the existing status code unless a new value was transferred.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/52e02a8812ae1a2d810d7f9f7fd800c3ccc320c4.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558abc7e3f ]
All the event_function/@func call context already uses perf_ctx_lock()
except for the !ctx->is_active case. Make it all consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.138301094@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f0f7679ad ]
A kref imbalance occurs when handling an unsolicited PRLO in direct
attached topology.
Rework PRLO rcv handling when in MAPPED state. Save the state that we were
handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO. Then in the
lpfc_cmpl_els_logo_acc() completion routine, manually restart discovery.
By issuing the PLOGI, which nlp_gets, before nlp_put at the end of the
lpfc_cmpl_els_logo_acc() routine, we are saving us from a final nlp_put.
And, we are still allowing the unreg_rpi to happen.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e5860b0ad ]
struct aac_srb_unit contains struct aac_srb, which contains struct sgmap,
which ends in a (currently) "fake" (1-element) flexible array. Converting
this to a flexible array is needed so that runtime bounds checking won't
think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or
CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a
flexible array.
It is not legal to have a flexible array in the middle of a structure, so
it either needs to be split up or rearranged so that it is at the end of
the structure. Luckily, struct aac_srb_unit, which is exclusively
consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member
ordering.
The values set in the on-stack struct aac_srb_unit instance "srbu" by the
only two callers, aac_issue_safw_bmic_identify() and
aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and
they both implicitly initialize srbu.srb.sgmap.count to 0 during
memset(). For example:
memset(&srbu, 0, sizeof(struct aac_srb_unit));
srbcmd = &srbu.srb;
srbcmd->flags = cpu_to_le32(SRB_DataIn);
srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS;
srbcmd->cdb[1] = 2; /* extended reporting */
srbcmd->cdb[8] = (u8)(datasize >> 8);
srbcmd->cdb[9] = (u8)(datasize);
rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize);
During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has
srbu.srb copied into it:
srb = fib_data(fibptr);
memcpy(srb, &srbu->srb, sizeof(struct aac_srb));
Only then is srb.sgmap.count written and srb->sg populated:
srb->count = cpu_to_le32(xfer_len);
sg64 = (struct sgmap64 *)&srb->sg;
sg64->count = cpu_to_le32(1);
sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr));
sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr));
sg64->sg[0].count = cpu_to_le32(xfer_len);
But this is happening in the DMA memory, not in srbu.srb. An attempt to
copy the changes back to srbu does happen:
/*
* Copy the updated data for other dumping or other usage if
* needed
*/
memcpy(&srbu->srb, srb, sizeof(struct aac_srb));
But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s)
always meant that srbu.srb would have held truncated information and any
attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count
would result in attempting to parse past the end of srbu.srb.sg.sg[0] into
srbu.srb_reply.
After getting a reply from hardware, the reply is copied into
srbu.srb_reply:
srb_reply = (struct aac_srb_reply *)fib_data(fibptr);
memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply));
This has always been fixed-size, so there's no issue here. It is worth
noting that the two callers _never check_ srbu contents -- neither
srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped
xfer_buf instead.)
Therefore, the ordering of members in struct aac_srb_unit does not matter,
and the flexible array member can moved to the end.
(Additionally, the two memcpy()s that update srbu could be entirely
removed as they are never consumed, but I left that as-is.)
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa7f3d2c5 ]
When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).
So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.
This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.
We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53369581dc ]
We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print. This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.
v5:
- Better commit message (Jonathan)
- Add kerenl doc with examples (Jani)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4067f4fa04 ]
Variables, used as denominators and maybe not assigned to other values,
should not be 0. bytes_per_element_y & bytes_per_element_c are
initialized by get_bytes_per_element() which should never return 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a15268787b ]
sampling_rate is an uint8_t but is assigned an unsigned int, and thus it
can overflow. As a result, sampling_rate is changed to uint32_t.
Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should
only be assigned to a value less or equal than 4.
This fixes 2 INTEGER_OVERFLOW issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81873f9e7 ]
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7e99058eb ]
Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc50b614d5 ]
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color management module. The issue could occur when the index 'i'
exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0beca868cd ]
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35ff747c86 ]
[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02fa62d41c ]
The plane's opacity should be reseted while the plane
is disabled. It prevents from seeing a possible global
or layer background color set earlier.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712131344.98113-1-yannick.fertre@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c11619af35 ]
Add touschscreen info for the nanote next (UMPC-03-SR).
After checking with multiple owners the DMI info really is this generic.
Signed-off-by: Ckath <ckath@yandex.ru>
Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65b72ea91a ]
This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works. New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c7795e245 ]
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b59ffad47 ]
syzbot reports that lzo1x_1_do_compress is using uninit-value:
=====================================================
BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178
...
Uninit was stored to memory at:
ea_put fs/jfs/xattr.c:639 [inline]
...
Local variable ea_buf created at:
__jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662
__jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934
=====================================================
The reason is ea_buf->new_ea is not initialized properly.
Fix this by using memset to empty its content at the beginning
in ea_get().
Reported-by: syzbot+02341e0daa42a15ce130@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=02341e0daa42a15ce130
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1600776855 ]
There are some cases, such as the one uncovered by Commit 46d4efcccc
("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails")
where
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
is called on gpu->pdev == NULL, as the GPU device has not been fully
initialized yet.
Turns out that there's more than just the aforementioned path that
causes this to happen (e.g. the case when there's speedbin data in the
catalog, but opp-supported-hw is missing in DT).
Assigning msm_gpu->pdev earlier seems like the least painful solution
to this, therefore do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602742/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c76114932 ]
Correct stream detection by initializing the structure
pqi_scsi_dev_raid_map_data to 0s.
When the OS issues SCSI READ commands, the driver erroneously considers
them as SCSI WRITES. If they are identified as sequential IOs, the driver
then submits those requests via the RAID path instead of the AIO path.
The 'is_write' flag might be set for SCSI READ commands also. The driver
may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs
being submitted through the RAID path.
Note: This does not cause data corruption.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d64ff0d230 ]
syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater
than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf.
Shaggy:
Modified sanity check to apply to control pages as well as leaf pages.
Reported-and-tested-by: syzbot+dca05492eff41f604890@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9e9e0852 ]
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
