[ Upstream commit 9ef84a3075 ]
[WHAT]
1. Set no scaling for writeback as they are hardcoded in DCN3.2+.
2. Set no fast plane update for writeback commits.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 012ea376a5 ]
Restricted pointers ("%pK") were never meant to be used
through printk(). They can acquire sleeping locks in atomic contexts.
Switch to %px over the more secure %p as this usage is a debugging aid,
gated behind CONFIG_DEBUG_VIRTUAL and used by WARN().
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4edd4ba71c ]
Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to
zero. To avoid struct redefinition errors, user space is therefore
supposed to include netinet/if_ether.h before (or instead of)
linux/if_ether.h. To relieve them from this burden, include the libc
header here if not building for kernel space.
Reported-by: Alyssa Ross <hi@alyssa.is>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c9753028 ]
The PWM2 on YB1-X90 tablets is used for keyboard backlight control but
it is disabled in the ACPI DSDT table. Add it to the override_status_ids
list to allow keyboard function control driver
(drivers/platform/x86/lenovo/yogabook.c) to use it.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260211222242.4101162-1-jekhor@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15176b818e ]
When DLVR sysfs group creation fails in proc_thermal_rfim_add(),
the function returns immediately without cleaning up the FIVR group
that may have been created earlier.
Add proper error unwinding to remove the FIVR group before returning
failure.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/LV3PR11MB876881B77D32A2854AD2908EF563A@LV3PR11MB8768.namprd11.prod.outlook.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac431d597a ]
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 305ff6b3a0 ]
The ceph_uninline_data function was missing proper snapshot context
handling for its OSD write operations. Both CEPH_OSD_OP_CREATE and
CEPH_OSD_OP_WRITE requests were passing NULL instead of the appropriate
snapshot context, which could lead to unnecessary object clone.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
// turn on cephfs inline data
./bin/ceph fs set a inline_data true --yes-i-really-really-mean-it
// allow fs_a client to take snapshot
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
// mount cephfs with fuse, since kernel cephfs doesn't support inline write
ceph-fuse --id fs_a -m 127.0.0.1:40318 --conf ceph.conf -d /mnt/mycephfs/
// bump snapshot seq
mkdir /mnt/mycephfs/.snap/snap1
echo "foo" > /mnt/mycephfs/test
// umount and mount it again using kernel cephfs client
umount /mnt/mycephfs
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
echo "bar" >> /mnt/mycephfs/test
./bin/rados listsnaps -p cephfs.a.data $(printf "%x\n" $(stat -c %i /mnt/mycephfs/test)).00000000
will see this object does unnecessary clone
1000000000a.00000000 (seq:2):
cloneid snaps size overlap
2 2 4 []
head - 8
but it's expected to see
10000000000.00000000 (seq:2):
cloneid snaps size overlap
head - 8
since there's no snapshot between these 2 writes
clone happened because the first osd request CEPH_OSD_OP_CREATE doesn't
pass snap context so object is created with snap seq 0, but later data
writeback is equipped with snapshot context.
snap.seq(1) > object snap seq(0), so osd does object clone.
This fix properly acquiring the snapshot context before performing
write operations.
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5226b96c0 ]
When ntfs_read_run_nb_ra() is invoked with run == NULL the code later
assumes run is valid and may call run_get_entry(NULL, ...), and also
uses clen/idx without initializing them. Smatch reported uninitialized
variable warnings and this can lead to undefined behaviour. This patch
fixes it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512230646.v5hrYXL0-lkp@intel.com/
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08ce2fee1b ]
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock.
Reported-by: syzbot+d27edf9f96ae85939222@syzkaller.appspotmail.com
Tested-by: syzbot+d27edf9f96ae85939222@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d27edf9f96ae85939222
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a6aba7f3c ]
Do not keep preallocated clusters for sparsed and compressed files.
Preserving preallocation in these cases causes fsx failures when running
with sparse files and preallocation enabled.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06909b2549 ]
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b90f16e4b ]
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1732053c8a ]
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d55d3fe2d1 ]
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which
is a valid index - so add a check for this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a54e944092 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The force-threading functionality is required on PREEMPT_RT because the
handler is using locks with can sleep on PREEMPT_RT.
Remove IRQF_ONESHOT from irqflags.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04d390af97 ]
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke
other interrupt handler and this supposed to happen from within the
hardirq.
Use IRQF_NO_THREAD to forbid forced-threading.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12daa9c195 ]
This reverts commit 2e3378f6c7.
Almost every register in this chip can be customized via OTP
memory. Somehow the value for R19, which decide if the flag is set
on read or write operation, seems to have been overwritten for the chip
the original patch were written for.
Revert the change to follow the default behavior.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251124-da9052-revert-v1-1-fbeb2c894002@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27ee0869d7 ]
Disabling PHYs in runtime usually causes the client with external abort
exception or similar issue due to lack of API to notify clients about PHY
removal. This patch removes the possibility to unbind i.MX PHY drivers in
runtime.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120111712.3159782-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ce913452 ]
The problem with the current implementation is that it does not consider
that the USB controller can have multiple PHY handles with different
arguments count, as for example we have in our cn9131 based platform:
"phys = <&cp0_comphy1 0>, <&cp0_utmi0>;".
In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells)
leads to not proper phy detection, taking the "marvell,cp110-utmi-phy"
dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0
(#phy-cells = <0>) and safely look for that phy.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dea984a74 ]
Failing device probe due to pm_runtime_put() returning an error is not
particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update rzt2h_wdt_wdtdcr_init() to simply discard the return
value of pm_runtime_put() and return success to the caller after
invoking that function.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d303d37ef5 ]
The module parameter `nowayout` indicates whether the watchdog should ever
be allowed to stop, but the driver currently ignores this option.
Pass the `nowayout` parameter to the watchdog core by setting the
WDOG_NO_WAY_OUT flag accordingly.
Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56d2126766 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant
to be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through
seq_file, for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107-restricted-pointers-binder-v1-1-181018bf3812@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b2ab3464 ]
Some products, such as the Ugreen DXP4800 Plus NAS, ship with the it87
wdt enabled by the firmware and a broken BIOS option that does not
allow to change the time or turn it off. As this makes installing
Linux rather difficult, change the it87_wdt to report it running to
the watchdog core.
Signed-off-by: René Rebe <rene@exactco.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fd8945a4 ]
Clear rx_running flag only after DMA teardown polling completes. In the
previous implementation the flag was being cleared while hardware teardown
was still in progress, creating a mismatch between software state
(flag = 0, "ready") and hardware state (still terminating).
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-3-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 623b07b370 ]
The DMA IRQ handler does not accounts for the overrun(OE) or any other
errors being reported by the IP before triggering a DMA transaction which
leads to the interrupts not being handled resulting into an IRQ storm.
The way to handle OE is to:
1. Reset the RX FIFO.
2. Read the UART_RESUME register, which clears the internal flag
Earlier, the driver issued DMA transations even in case of OE which shouldn't
be done according to the OE handling mechanism mentioned above, as we are
resetting the FIFO's, refer section: "12.1.6.4.8.1.3.6 Overrun During
Receive" [0].
[0] https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-2-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abe850d82c ]
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths.
Signed-off-by: Diksha Kumari <dikshakdevgan@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Link: https://patch.msgid.link/20260113091712.7071-1-dikshakdevgan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cea2a1257a ]
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).
Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260108165902.795354-1-mario.peter@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4c1d0618 ]
When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.
However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.
The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.
It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0145e7acd2 ]
Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.
The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.
Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.
This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz> # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f69b5ac682 ]
Currently BMI260 & BMI270 devices do not automatically load this
driver. To fix this, add missing MODULE_DEVICE_TABLE for the i2c,
acpi, and of device tables so the driver will load when the hardware
is detected.
Tested on my OneXPlayer F1 Pro.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49b039a61a ]
Setting up an IRQ would normally be done in the .activate() and
.deactivate() ops of the IRQ domain, but for hierarchical IRQ domains
the .activate() and .deactivate() ops are overridden in the
gpiochip_hierarchy_setup_domain_ops() function.
As such, activating and deactivating need to be done in the .translate()
and .free() ops of the IRQ domain.
For RZ/T2H and RZ/N2H, interrupts go through the pin controller, into
the ICU, which level-translates them and forwards them to the GIC.
To use a GPIO as an interrupt it needs to be put into peripheral
function mode 0, which will connect it to the IRQ lines of the ICU.
The IRQ chip .child_to_parent_hwirq() callback is called as part of the
IRQ fwspec parsing logic (as part of irq_create_of_mapping()) which
happens before the IRQ is requested (as part of gpiochip_lock_as_irq()).
gpiochip_lock_as_irq() calls gpiod_get_direction() if the
.get_direction() callback is provided to ensure that the GPIO line is
set up as input.
In our case, IRQ function is separate from GPIO, and both cannot be true
at the same time.
Return GPIO_LINE_DIRECTION_IN even if pin is in IRQ function to allow
this setup to work.
Hold the spinlock to ensure atomicity between reading the PMC register
(which determines whether the pin is in GPIO mode or not) and reading
the function of the pin when it is not in GPIO mode.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251205150234.2958140-3-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dad9f13d96 ]
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node reference is automatically released when the loop scope
ends.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/tencent_FA1AC670F5CF49873F88A44424F866994A08@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b54c82d6cb ]
commit 14374fbb3f ("misc: eeprom_93xx46: Add new 93c56 and 93c66
compatible strings") added support for 93xx56 and 93xx66 eeproms, but
didn't take into account that the write enable/disable + erase all
commands are hardcoded for the 6-bit address of the 93xx46.
This commit fixes the command word generation by increasing the number
of shifts as the address field grows, keeping the command intact.
Also, the check for 8-bit or 16-bit mode is no longer required as this
is already taken into account in the edev->addrlen field.
Signed-off-by: Markus Perkins <markus@notsyncing.net>
Link: https://patch.msgid.link/20251202104823.429869-3-markus@notsyncing.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 255b721c96 ]
mtk_eint_do_init() allocates several pointer arrays which are then
populated in a per-instance loop and freed on error. The arrays are
currently allocated with devm_kmalloc(), so their entries are left
uninitialised until the per-instance allocations succeed.
On a failure in the middle of the loop, the error path iterates over
the full nbase range and calls devm_kfree() on each element. For
indices which were never initialised, the corresponding array entries
contain stack garbage. If any of those happen to be non-zero,
devm_kfree() will pass them to devres_destroy(), which will WARN
because there is no matching devm_kmalloc() resource for such bogus
pointers.
Improve the robustness and readability by:
- Using devm_kcalloc() for the pointer arrays so that all entries
start as NULL, ensuring that only genuinely initialised elements
may be freed and preventing spurious WARN_ON()s in the error path.
- Switching the allocations to sizeof(*ptr) / sizeof(**ptr) forms,
avoiding hard-coded element types and making the code more resilient
to future type changes.
- Dropping the redundant NULL checks before devm_kfree(), as
devm_kfree() safely handles NULL pointers.
The functional behaviour in the successful initialisation path remains
unchanged, while the error handling becomes simpler and less
error-prone.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba75ecb97d ]
In the function bcm_vk_read(), the pointer entry is checked, indicating
that it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, the
following code may cause null-pointer dereferences:
struct vk_msg_blk tmp_msg = entry->to_h_msg[0];
set_msg_id(&tmp_msg, entry->usr_msg_id);
tmp_msg.size = entry->to_h_blks - 1;
To prevent these possible null-pointer dereferences, copy to_h_msg,
usr_msg_id, and to_h_blks from iter into temporary variables, and return
these temporary variables to the application instead of accessing them
through a potentially NULL entry.
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Link: https://patch.msgid.link/20251211063637.3987937-1-islituo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 434e1a0ee1 ]
While suspend and resume, parent clock config for refclk was getting lost.
So save and restore it in suspend and resume operations.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Link: https://patch.msgid.link/20251216-phy-cadence-torrent-resume-restore-refclk-parent-v3-1-8a7ed84b47e3@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf3bc0265 ]
m2m_hw_period is initialized only when chan_config->m2m_hw is true. This
triggers a warning:
‘m2m_hw_period’ may be used uninitialized [-Wmaybe-uninitialized]
Although m2m_hw_period is only used when chan_config->m2m_hw is true and
ignored otherwise, initialize it unconditionally to 0.
ccr is initialized by stm32_mdma_set_xfer_param() when the sg list is not
empty. This triggers a warning:
‘ccr’ may be used uninitialized [-Wmaybe-uninitialized]
Indeed, it could be used uninitialized if the sg list is empty. Initialize
it to 0.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251217-mdma_warnings_fix-v2-1-340200e0bb55@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7178c3586a ]
maxburst, as provided by the client, specifies the largest amount of
data that is allowed to be transferred in one burst. This limit is
normally provided to avoid a data burst overflowing the target FIFO.
It does not mean that the DMA engine can only do bursts in that size.
Let the driver pick the largest supported burst length within the
given limit. This lets the driver work correctly with some clients that
give a large maxburst value. In particular, the 8250_dw driver will give
a quarter of the UART's FIFO size as maxburst. On some systems the FIFO
size is 256 bytes, giving a maxburst of 64 bytes, while the hardware
only supports bursts of up to 16 bytes.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4c9d8a10 ]
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization.
Acked-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251127165337.19172-1-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c141c8221b ]
When parsing the region bridge list from the "fpga-bridges" device tree
property, the of-fpga-region driver will silently ignore bridges which fail
to be obtained, for example due to a missing bridge driver or invalid
phandle.
This can lead to hardware issues if a region bridge stays coupled when
partial programming is performed.
Fail if any of the bridges specified in "fpga-bridges" cannot be obtained.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20251127-of-fpga-region-fail-if-bridges-not-found-v1-1-ca674f8d07eb@bootlin.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6811e0a08b ]
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d31228143a ]
Add error checking for clk_prepare_enable() calls in
dw8250_runtime_resume(). Currently if either clock fails to enable,
the function returns success while leaving clocks in inconsistent state.
This change implements comprehensive error handling by checking the return
values of both clk_prepare_enable() calls. If the second clock enable
operation fails after the first clock has already been successfully
enabled, the code now properly cleans up by disabling and unpreparing
the first clock before returning. The error code is then propagated to
the caller, ensuring that clock enable failures are properly reported
rather than being silently ignored.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 618b4aec12 ]
The return value of sdio_alloc_irq() was not stored in status.
If sdio_alloc_irq() fails after rtw_drv_register_netdev() succeeds,
status remains _SUCCESS and the error path skips resource cleanup,
while rtw_drv_init() still returns success.
Store the return value of sdio_alloc_irq() in status and reuse the
existing error handling which relies on status.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251208092730.262499-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87e5575a6 ]
Add cs42l45 to the wake_capable_list because it can generate jack events
whilst the bus is stopped.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215151729.3911077-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d41ed4ea4 ]
Without module_platform_driver(), stm32-dma3 doesn't have a
module_exit procedure. Once stm32-dma3 module is inserted, it
can't be removed, marked busy.
Use module_platform_driver() instead of subsys_initcall() to register
(insmod) and unregister (rmmod) stm32-dma3 driver.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-1-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590fe2f46c ]
68000 has different alignment needs to 68020+.
memcpy() checks if the destination is aligned and does a smaller copy
to fix the alignment and then critically for 68000 it checks if the
source is still unaligned and if it is reverts to smaller copies.
memmove() does not currently do the second part and malfunctions if
one of the pointers is aligned and the other isn't.
This is apparently getting triggered by printk. If I put breakpoints
into the new checks added by this commit the first hit looks like this:
memmove (n=205, src=0x2f3971 <printk_shared_pbufs+205>, dest=0x2f3980 <printk_shared_pbufs+220>) at arch/m68k/lib/memmove.c:82
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
