The Message Unit(MU) General Purpose Control registers are used for
TX doorbell, but there is no hardware ACK support.
The current TX doorbell channel is using tasklet to emulate hardware
ACK support to kick the TX tick from controller driver side.
The new added TX doorbell channel V2 not using tasklet to emulate the
hardware ACK support. The behavior for the channel is just writing the
GCR register, and no else. This will be used for SCMI mailbox.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When entering kdb/kgdb on a kernel panic, it was be observed that the
console isn't flushed before the `kdb` prompt came up. Specifically,
when using the buddy lockup detector on arm64 and running:
echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
I could see:
[ 26.161099] lkdtm: Performing direct entry HARDLOCKUP
[ 32.499881] watchdog: Watchdog detected hard LOCKUP on cpu 6
[ 32.552865] Sending NMI from CPU 5 to CPUs 6:
[ 32.557359] NMI backtrace for cpu 6
... [backtrace for cpu 6] ...
[ 32.558353] NMI backtrace for cpu 5
... [backtrace for cpu 5] ...
[ 32.867471] Sending NMI from CPU 5 to CPUs 0-4,7:
[ 32.872321] NMI backtrace forP cpuANC: Hard LOCKUP
Entering kdb (current=..., pid 0) on processor 5 due to Keyboard Entry
[5]kdb>
As you can see, backtraces for the other CPUs start printing and get
interleaved with the kdb PANIC print.
Let's replicate the commands to flush the console in the kdb panic
entry point to avoid this.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230822131945.1.I5b460ae8f954e4c4f628a373d6e74713c06dd26f@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Commit f6fca3917b "btrfs: store chunk size in space-info struct"
broke data chunk allocations on non-zoned multi-device filesystems when
using default chunk_size. Commit 5da431b71d "btrfs: fix the max chunk
size and stripe length calculation" partially fixed that, and this patch
completes the fix for that case.
After commit f6fca3917b and 5da431b71d, the sequence of events for
a data chunk allocation on a non-zoned filesystem is:
1. btrfs_create_chunk calls init_alloc_chunk_ctl, which copies
space_info->chunk_size (default 10 GiB) to ctl->max_stripe_len
unmodified. Before f6fca3917b, ctl->max_stripe_len value was
1 GiB for non-zoned data chunks and not configurable.
2. btrfs_create_chunk calls gather_device_info which consumes
and produces more fields of chunk_ctl.
3. gather_device_info multiplies ctl->max_stripe_len by
ctl->dev_stripes (which is 1 in all cases except dup)
and calls find_free_dev_extent with that number as num_bytes.
4. find_free_dev_extent locates the first dev_extent hole on
a device which is at least as large as num_bytes. With default
max_chunk_size from f6fca3917b, it finds the first hole which is
longer than 10 GiB, or the largest hole if that hole is shorter
than 10 GiB. This is different from the pre-f6fca3917b4d
behavior, where num_bytes is 1 GiB, and find_free_dev_extent
may choose a different hole.
5. gather_device_info repeats step 4 with all devices to find
the first or largest dev_extent hole that can be allocated on
each device.
6. gather_device_info sorts the device list by the hole size
on each device, using total unallocated space on each device to
break ties, then returns to btrfs_create_chunk with the list.
7. btrfs_create_chunk calls decide_stripe_size_regular.
8. decide_stripe_size_regular finds the largest stripe_len that
fits across the first nr_devs device dev_extent holes that were
found by gather_device_info (and satisfies other constraints
on stripe_len that are not relevant here).
9. decide_stripe_size_regular caps the length of the stripe it
computed at 1 GiB. This cap appeared in 5da431b71d to correct
one of the other regressions introduced in f6fca3917b.
10. btrfs_create_chunk creates a new chunk with the above
computed size and number of devices.
At step 4, gather_device_info() has found a location where stripe up to
10 GiB in length could be allocated on several devices, and selected
which devices should have a dev_extent allocated on them, but at step
9, only 1 GiB of the space that was found on each device can be used.
This mismatch causes new suboptimal chunk allocation cases that did not
occur in pre-f6fca3917b4d kernels.
Consider a filesystem using raid1 profile with 3 devices. After some
balances, device 1 has 10x 1 GiB unallocated space, while devices 2
and 3 have 1x 10 GiB unallocated space, i.e. the same total amount of
space, but distributed across different numbers of dev_extent holes.
For visualization, let's ignore all the chunks that were allocated before
this point, and focus on the remaining holes:
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10x 1 GiB unallocated)
Device 2: [__________] (10 GiB contig unallocated)
Device 3: [__________] (10 GiB contig unallocated)
Before f6fca3917b, the allocator would fill these optimally by
allocating chunks with dev_extents on devices 1 and 2 ([12]), 1 and 3
([13]), or 2 and 3 ([23]):
[after 0 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [__________] (10 GiB)
Device 3: [__________] (10 GiB)
[after 1 chunk allocation]
Device 1: [12] [_] [_] [_] [_] [_] [_] [_] [_] [_]
Device 2: [12] [_________] (9 GiB)
Device 3: [__________] (10 GiB)
[after 2 chunk allocations]
Device 1: [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
Device 2: [12] [_________] (9 GiB)
Device 3: [13] [_________] (9 GiB)
[after 3 chunk allocations]
Device 1: [12] [13] [12] [_] [_] [_] [_] [_] [_] [_] (7 GiB)
Device 2: [12] [12] [________] (8 GiB)
Device 3: [13] [_________] (9 GiB)
[...]
[after 12 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [_] [_] (2 GiB)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [__] (2 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)
[after 13 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [_] (1 GiB)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)
[after 14 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [13] [_] (1 GiB)
[after 15 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [23] (full)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [13] [23] (full)
This allocates all of the space with no waste. The sorting function used
by gather_device_info considers free space holes above 1 GiB in length
to be equal to 1 GiB, so once find_free_dev_extent locates a sufficiently
long hole on each device, all the holes appear equal in the sort, and the
comparison falls back to sorting devices by total free space. This keeps
usable space on each device equal so they can all be filled completely.
After f6fca3917b, the allocator prefers the devices with larger holes
over the devices with more free space, so it makes bad allocation choices:
[after 1 chunk allocation]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [_________] (9 GiB)
Device 3: [23] [_________] (9 GiB)
[after 2 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [________] (8 GiB)
Device 3: [23] [23] [________] (8 GiB)
[after 3 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [23] [_______] (7 GiB)
Device 3: [23] [23] [23] [_______] (7 GiB)
[...]
[after 9 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
[after 10 chunk allocations]
Device 1: [12] [_] [_] [_] [_] [_] [_] [_] [_] [_] (9 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
[after 11 chunk allocations]
Device 1: [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [13] (full)
No further allocations are possible, with 8 GiB wasted (4 GiB of data
space). The sort in gather_device_info now considers free space in
holes longer than 1 GiB to be distinct, so it will prefer devices 2 and
3 over device 1 until all but 1 GiB is allocated on devices 2 and 3.
At that point, with only 1 GiB unallocated on every device, the largest
hole length on each device is equal at 1 GiB, so the sort finally moves
to ordering the devices with the most free space, but by this time it
is too late to make use of the free space on device 1.
Note that it's possible to contrive a case where the pre-f6fca3917b4d
allocator fails the same way, but these cases generally have extensive
dev_extent fragmentation as a precondition (e.g. many holes of 768M
in length on one device, and few holes 1 GiB in length on the others).
With the regression in f6fca3917b, bad chunk allocation can occur even
under optimal conditions, when all dev_extent holes are exact multiples
of stripe_len in length, as in the example above.
Also note that post-f6fca3917b4d kernels do treat dev_extent holes
larger than 10 GiB as equal, so the bad behavior won't show up on a
freshly formatted filesystem; however, as the filesystem ages and fills
up, and holes ranging from 1 GiB to 10 GiB in size appear, the problem
can show up as a failure to balance after adding or removing devices,
or an unexpected shortfall in available space due to unequal allocation.
To fix the regression and make data chunk allocation work
again, set ctl->max_stripe_len back to the original SZ_1G, or
space_info->chunk_size if that's smaller (the latter can happen if the
user set space_info->chunk_size to less than 1 GiB via sysfs, or it's
a 32 MiB system chunk with a hardcoded chunk_size and stripe_len).
While researching the background of the earlier commits, I found that an
identical fix was already proposed at:
https://lore.kernel.org/linux-btrfs/de83ac46-a4a3-88d3-85ce-255b7abc5249@gmx.com/
The previous review missed one detail: ctl->max_stripe_len is used
before decide_stripe_size_regular() is called, when it is too late for
the changes in that function to have any effect. ctl->max_stripe_len is
not used directly by decide_stripe_size_regular(), but the parameter
does heavily influence the per-device free space data presented to
the function.
Fixes: f6fca3917b ("btrfs: store chunk size in space-info struct")
CC: stable@vger.kernel.org # 6.1+
Link: https://lore.kernel.org/linux-btrfs/20231007051421.19657-1-ce3g8jdj@umail.furryterror.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Adhere to linux coding style. Reported by checkpatch.pl:
CHECK: Prefer using the BIT macro
Signed-off-by: Nandha Kumar Singaram <nandhakumar.singaram@gmail.com>
Link: https://lore.kernel.org/r/20231015133558.GA5489@ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
variable name "byBBVGANew" updated like below:
a.type encoding info dropped from name
b.camelcase name replaced by snakecase
Issue found by checkpatch
Signed-off-by: Pavan Bobba <opensource206@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/abb105b822090a82ef081b2e28705bf14b8ce058.1696791459.git.opensource206@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
variable name "byBBVGACurrent" updated like below:
a.type encoding info dropped from name
b.camelcase name replaced by snakecase
Issue found by checkpatch
Signed-off-by: Pavan Bobba <opensource206@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f0dfd4d2460f858540d465dd8bcfc920c219e94d.1696791459.git.opensource206@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
array name "abyBBVGA" updated like below:
a.type encoding info dropped from name
b.camelcase name replaced by snakecase
Issue found by checkpatch
Signed-off-by: Pavan Bobba <opensource206@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/13a233dff4d6daf728f75ab18b38ec9d0703764b.1696791459.git.opensource206@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename variable pBa to ba to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20231014044435.11947-2-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function _rtl92e_dm_ctrl_initgain_byrssi_false_alarm() as it is
unused. Remove in above function called function
_rtl92e_dm_ctrl_initgain_byrssi_highpwr() as well.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/80a5a0b67d9d225a58c96781c33e2216c0ea1c6e.1697127817.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove variable dig_algorithm as its value is set to DIG_ALGO_BY_RSSI at
initialization. No further writes to dig_algorithm are done. The
equations result accordingly. Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/66f7275aa46e68577cc4c20582ffbd16de13f470.1697127817.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove variable dig_enable_flag as its value is set to 1 at
initialization. No further writes to dig_enable_flag are done. The
equations result accordingly. Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/24a9245840093c5a14124f9fc896433c7d85d18c.1697127817.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scsi_lock() and scsi_unlock() macros protect the sm_state and the
single queue element srb for write access in the driver. As suggested,
these names are very generic. Remove the macros from header file and call
spin_lock_irq() & spin_unlock_irq() directly instead.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/75a5990190cf7a5d20d1c27237b90b583e68ced8.1697152251.git.soumya.negi97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver rts5208 uses macros to read/write data & to perform generic PCI
functions. Rewrite these macros as static inline functions in the header
file.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/c7431fe4d7f72138d8dc86269794f87c30d21a38.1697152251.git.soumya.negi97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/ZSR2O6zGyT/VX6ve@work
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve a
number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwElQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylx7ACgthY1JVY+YL61s2CBKgSdVJ7eAJUAnjnFwSy4
KTcgnEAnFlm/xpfVgHwA
=2xN2
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
a number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
usb: typec: ucsi: Fix missing link removal
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
xhci: Preserve RsvdP bits in ERSTBA register correctly
xhci: Clear EHB bit only at end of interrupt handler
xhci: track port suspend state correctly in unsuccessful resume cases
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
usb: dwc3: Soft reset phy on probe for host
usb: hub: Guard against accesses to uninitialized BOS descriptors
usb: typec: qcom: Update the logic of regulator enable and disable
usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
usb: musb: Get the musb_qh poniter after musb_giveback
usb: musb: Modify the "HWVers" register address
usb: cdnsp: Fixes issue with dequeuing not queued requests
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
...
Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwD9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylEJgCeKeWhXY68gkV3Y2WjOuk9rA4kfO4An3YhzuyX
YQS5m+bhibXE5u6KiXV5
=LD0t
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- embargoed hardware issue documentation update
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwDDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+dACeMHpZCh9sxF78uhfIrth6et899uYAoNBoiAOA
pTDip38HytOnQ/FpTEzh
=AuVV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
-----BEGIN PGP SIGNATURE-----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=9LTH
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
- Fix softlockup/crash when using hcall tracing.
- Fix pte_access_permitted() for PAGE_NONE on 8xx.
- Fix inverted pte_young() test in __ptep_test_and_clear_young() on 64-bit BookE.
- Fix unhandled math emulation exception on 85xx.
- Fix kernel crash on syscall return on 476.
Thanks to: Athira Rajeev, Christophe Leroy, Eddie James, Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=uMis
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix softlockup/crash when using hcall tracing
- Fix pte_access_permitted() for PAGE_NONE on 8xx
- Fix inverted pte_young() test in __ptep_test_and_clear_young()
on 64-bit BookE
- Fix unhandled math emulation exception on 85xx
- Fix kernel crash on syscall return on 476
Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.
* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/47x: Fix 47x syscall return crash
powerpc/85xx: Fix math emulation exception
powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
powerpc/pseries: Remove unused r0 in the hcall tracing code
powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
prototypes between architectures.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=20Na
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
Arkadiusz Kubalewski says:
====================
dpll: add phase-offset and phase-adjust
Improve monitoring and control over dpll devices.
Allow user to receive measurement of phase difference between signals
on pin and dpll (phase-offset).
Allow user to receive and control adjustable value of pin's signal
phase (phase-adjust).
v4->v5:
- rebase series on top of net-next/main, fix conflict - remove redundant
attribute type definition in subset definition
v3->v4:
- do not increase do version of uAPI header as it is not needed (v3 did
not have this change)
- fix spelling around commit messages, argument descriptions and docs
- add missing extack errors on failure set callbacks for pin phase
adjust and frequency
- remove ice check if value is already set, now redundant as checked in
the dpll subsystem
v2->v3:
- do not increase do version of uAPI header as it is not needed
v1->v2:
- improve handling for error case of requesting the phase adjust set
- align handling for error case of frequency set request with the
approach introduced for phase adjust
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Align the approach of pin frequency set behavior with the approach
introduced with pin phase adjust set.
Fail the request if any of devices did not registered the callback ops.
If callback op on any pin's registered device fails, return error and
rollback the value to previous one.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new callback ops related to measurement and adjustment of
signal phase for pin-dpll in ice driver.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add callback ops for pin-dpll phase measurement.
Add callback for pin signal phase adjustment.
Add min and max phase adjustment values to pin proprties.
Invoke callbacks in dpll_netlink.c when filling the pin details to
provide user with phase related attribute values.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add attributes for providing the user with:
- measurement of signals phase offset between pin and dpll
- ability to adjust the phase of pin signal
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation on:
- measurement of phase of signal between pin and dpll
- adjustment of pin signal phase
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera says:
====================
i40e: Add basic devlink support
The series adds initial support for devlink to i40e driver.
Patch-set overview:
Patch 1: Adds initial devlink support (devlink and port registration)
Patch 2: Refactors and split i40e_nvm_version_str()
Patch 3: Adds support for 'devlink dev info'
Patch 4: Refactors existing helper function to read PBA ID
Patch 5: Adds 'board.id' to 'devlink dev info' using PBA ID
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose stored PBA ID string as unique board identifier via
devlink's .info_get command.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function i40e_read_pba_string() is currently unused but will be used
by subsequent patch to provide board ID via devlink device info.
The function reads PBA block from NVM so it cannot be called during
adapter reset and as we would like to provide PBA ID via devlink
info it is better to read the PBA ID during i40e_probe() and cache
it in i40e_hw structure to avoid a waiting for potential adapter
reset in devlink info callback.
So...
- Remove pba_num and pba_num_size arguments from the function,
allocate resource managed buffer to store PBA ID string and
save resulting pointer to i40e_hw->pba_id field
- Make the function void as the PBA ID can be missing and in this
case (or in case of NVM reading failure) the i40e_hw->pba_id
will be NULL
- Rename the function to i40e_get_pba_string() to align with other
functions like i40e_get_oem_version() i40e_get_port_mac_addr()...
- Call this function on init during i40e_probe()
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide devlink .info_get callback to allow the driver to report
detailed version information. The following info is reported:
"serial_number" -> The PCI DSN of the adapter
"fw.mgmt" -> The version of the firmware
"fw.mgmt.api" -> The API version of interface exposed over the AdminQ
"fw.psid" -> The version of the NVM image
"fw.bundle_id" -> Unique identifier for the combined flash image
"fw.undi" -> The combo image version
With this, 'devlink dev info' provides at least the same amount
information as is reported by ETHTOOL_GDRVINFO:
$ ethtool -i enp2s0f0 | egrep '(driver|firmware)'
driver: i40e
firmware-version: 9.30 0x8000e5f3 1.3429.0
$ devlink dev info pci/0000:02:00.0
pci/0000:02:00.0:
driver i40e
serial_number c0-de-b7-ff-ff-ef-ec-3c
versions:
running:
fw.mgmt 9.130.73618
fw.mgmt.api 1.15
fw.psid 9.30
fw.bundle_id 0x8000e5f3
fw.undi 1.3429.0
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function formats NVM version string according adapter's
EETrackID value. If this value OEM specific (0xffffffff) then
the reported version is with format:
"<gen>.<snap>.<release>"
and in other case
"<nvm_maj>.<nvm_min> <eetrackid> <cvid_maj>.<cvid_bld>.<cvid_min>"
These versions are reported in the subsequent patch in this series
that implements devlink .info_get but separately.
So split the function into separate ones, refactor it to use them
and remove ugly static string buffer.
Additionally convert NVM/OEM version mask macros to use GENMASK and
use FIELD_GET/FIELD_PREP for them in i40e_nvm_version_str() and
i40e_get_oem_version(). This makes code more readable and allows
us to remove related shift macros.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an initial support for devlink interface to i40e driver.
Similarly to ice driver the implementation doe not enable devlink
to manage device-wide configuration and devlink instance is created
for each physical function of PCIe device.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are trying to timestamp a TX packet, there may be
occasions when the TX timestamp register is still not
updated with the latest timestamp even if the timestamp
packet descriptor is marked as complete.
This usually happens in cases where the system is under
stress or flow control is affecting the transmit side.
We will solve this problem by saving the snapshot of the
timestamp register when we are posting the TX descriptor.
At this time, the register contains previously timestamped
packet's value and valid timestamp of the current packet must
be different than this.
Upon completion of the current descriptor, we will check if
the timestamp register is updated or not before timestamping
the skb. If not updated, we will schedule the ptp worker to
fetch the updated time later and timestamp the skb.
Also now we restrict number of outstanding PTP TX packet
requests to 1.
Reported-by: Simon White <Simon.White@viavisolutions.com>
Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a section to netdev maintainer doc encouraging reviewers
to chime in on the mailing list.
The questions about "when is it okay to share feedback"
keep coming up (most recently at netconf) and the answer
is "pretty much always".
Extend the section of 7.AdvancedTopics.rst which deals
with reviews a little bit to add stuff we had been recommending
locally.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree says:
====================
sfc: support conntrack NAT offload
The EF100 MAE supports performing NAT (and NPT) on packets which match in
the conntrack table. This series adds that capability to the driver.
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an IP address and/or L4 port for NAPT is available from a CT match,
the MAE will perform the edits; if no CT lookup has been performed for
this packet, the CT lookup did not return a match, or the matched CT
entry did not include NAPT, the action will have no effect.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAE can edit either address, L4 port, or both, for either source
or destination. These can't be mixed; i.e. it can edit source addr
and source port, but not (say) source addr and dest port.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
