The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-17-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-16-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-15-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-14-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-13-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-12-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-11-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-10-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-9-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-8-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-7-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-6-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-5-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-4-u.kleine-koenig@pengutronix.de
Sometimes the contents of a partition are compressed. Add a property to
express this and define the algorithm used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230927180545.3522628-1-sjg@chromium.org
If the driver cannot read all the requested data, -EBADMSG or
-EUCLEAN should never be returned.
Add a WARN_ON_ONCE() to help driver developers detect this error.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230926065733.3240322-1-wangzhaolong1@huawei.com
Both the JEDEC and ONFI specification say that read cache sequential
support is an optional command. This means that we not only need to
check whether the individual controller supports the command, we also
need to check the parameter pages for both ONFI and JEDEC NAND flashes
before enabling sequential cache reads.
This fixes support for NAND flashes which don't support enabling cache
reads, i.e. Samsung K9F4G08U0F or Toshiba TC58NVG0S3HTA00.
Sequential cache reads are now only available for ONFI and JEDEC
devices, if individual vendors implement this, it needs to be enabled
per vendor.
Tested on i.MX6Q with a Samsung NAND flash chip that doesn't support
sequential reads.
Fixes: 003fe4b954 ("mtd: rawnand: Support for sequential cache reads")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230922141717.35977-1-r.czerwinski@pengutronix.de
These variables are never referenced in the code, just remove them
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify logic for rspq_check_napi.
Drop redundant and wrong napi_is_scheduled call as it's not race free
and directly use the output of napi_schedule to understand if a napi is
pending or not.
rspq_check_napi main logic is to check if is_new_response is true and
check if a napi is not scheduled. The result of this function is then
used to detect if we are missing some interrupt and act on top of
this... With this knowing, we can rework and simplify the logic and make
it less problematic with testing an internal bit for napi.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
.. as drivers won't see DMA_FQ any more.
See commit a4fdd97622 ("iommu: Use flush queue capability") for
details.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20231016051305.13091-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_map_sgtable() function returns ssize_t and negative error
codes but it's declared as size_t instead. I think that static checkers
would have complained if this caused a bug, but even though it doesn't
cause a bug, it's definitely worth fixing.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/06672b96-23fd-424c-8880-1626e7bf119c@moroto.mountain
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/ZSRFW0yDlDo8+at3@work
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The original debugfs only dumps all page tables without pasid. With
pasid supported, the page table with pasid also needs to be dumped.
This patch supports dumping a specified page table in legacy mode or
scalable mode with or without a specified pasid.
For legacy mode, according to bus number and DEVFN, traverse the root
table and context table to get the pointer of page table in the
context table entry, then dump the specified page table.
For scalable mode, according to bus number, DEVFN and pasid, traverse
the root table, context table, pasid directory and pasid table to get
the pointer of page table in the pasid table entry, then dump the
specified page table..
Examples are as follows:
1) Dump the page table of device "0000:00:1f.0" that only supports
legacy mode.
$ sudo cat
/sys/kernel/debug/iommu/intel/0000:00:1f.0/domain_translation_struct
2) Dump the page table of device "0000:00:0a.0" with PASID "1" that
supports scalable mode.
$ sudo cat
/sys/kernel/debug/iommu/intel/0000:00:0a.0/1/domain_translation_struct
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jingqi Liu <Jingqi.liu@intel.com>
Link: https://lore.kernel.org/r/20231013135811.73953-4-Jingqi.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a debugfs directory per pair of {device, pasid} if the mappings of
its page table are created and destroyed by the iommu_map/unmap()
interfaces. i.e. /sys/kernel/debug/iommu/intel/<device source id>/<pasid>.
Create a debugfs file in the directory for users to dump the page
table corresponding to {device, pasid}. e.g.
/sys/kernel/debug/iommu/intel/0000:00:02.0/1/domain_translation_struct.
For the default domain without pasid, it creates a debugfs file in the
debugfs device directory for users to dump its page table. e.g.
/sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct.
When setting a domain to a PASID of device, create a debugfs file in
the pasid debugfs directory for users to dump the page table of the
specified pasid. Remove the debugfs device directory of the device
when releasing a device. e.g.
/sys/kernel/debug/iommu/intel/0000:00:01.0
Signed-off-by: Jingqi Liu <Jingqi.liu@intel.com>
Link: https://lore.kernel.org/r/20231013135811.73953-3-Jingqi.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the page table entry pointing to a huge page, the data below the
level of the huge page is meaningless and does not need to be dumped.
Signed-off-by: Jingqi Liu <Jingqi.liu@intel.com>
Link: https://lore.kernel.org/r/20231013135811.73953-2-Jingqi.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function are defined in the pasid.c file, but not called
elsewhere, so delete the unused function.
drivers/iommu/intel/pasid.c:342:20: warning: unused function 'pasid_set_wpe'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6185
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230818091603.64800-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Device-tree binding update:
* Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
* Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
* Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
* Minor cleanups to the SVA code
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmUpJ3QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKIJB/9w6ctFbcTw+jGfhSJems7g9ZMe+bEEDIf4
h67022FIB01JtmNVeMNXYVZLWDlrvSoq5thhF8BYSPG+k2zVumvvMUC6PxEjnAcL
gSZ/bA9kWkm9Sbvnwg2VhpNlDfV59HJEgN5wJGiNAHllmxEHCkHKK53+QSAzanSh
LelC9KYH5UJm0kc2cRvi5DXpn0TecfzCFBeYYB+LltOm9bJhwLQA0ehh4ac5me8r
QveQyhdKOK+WQVw1nLPZy0vgc925GojU74ccazQECP541ik1dU21+TO7n2afn8J8
28YnqsSIDodBHlVWQqGQkIr3hJ/Pu0wnrGy7Oi1mAMBHOs+CgixG
=9oiB
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.7
- Device-tree binding update:
* Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
* Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
* Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
* Minor cleanups to the SVA code
Since commit cc99582d46 ("dmaengine: xilinx: xilinx_dma: Convert to
platform remove callback returning void") xilinx_dma_remove() doesn't
return zero any more. As the function has no return value any more, just
drop the statement about the return value.
Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231014211656.1512016-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C64 area separately as that is on separate
I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C64 area separately as
that is on separate I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
drm/i915 feature pull #2 for v6.7:
Features and functionality:
- Preparation for i915 display code reuse in upcoming Xe driver (Jani)
- Drop the fastboot module parameter and use the platform defaults (Arun)
- Enable new LNL FBC features (Vinod)
- Add LNL display feature capability reads (Vinod)
Refactoring and cleanups:
- Locally enable W=1 warnings by default in i915 (Jani)
- Move HDCP GSC message code to a separate file (Suraj)
- GVT include cleanups (Jani)
- Move more display init under display/ (Jani)
- DPLL ID refactoring (Ville)
- Better abstraction of GT0 (Jani)
- Move VGA decode function to GMCH code (Uma)
- Use local64_try_cmpxchg() to optimize PMU event read (Uros Bizjak)
- Clean up FBC checks (Ville)
- Constify and unify state checker calling conventions (Ville)
- Add display step name helper (Chaitanya)
Documentation:
- Update CCS and GSC CS documentation (Rodrigo)
- Fix a number of documentation typos (Randy Dunlap)
Fixes:
- VLV DSI fixes and quirks (Hans)
- Fix crtc state memory leaks (Suraj)
- Increase LSPCON mode settle timeout (Niko Tsirakis)
- Stop clobbering old crtc state during state check (Ville)
- Fix VLV color state readout (Ville)
- Fix cx0 PHY pipe reset to allow S0iX (Khaled)
- Ensure DP MST pbn_div is up-to-date after sink reconnect (Imre)
- Drop an unnecessary NULL check to fix static analyzer warning (Suraj)
- Use an explicit rather than implicit include for frontbuffer tracking (Jouni)
Merges:
- Backmerge drm-next to fix a conflict (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0m00xew.fsf@intel.com
When running will-it-scale[1] open2_process testcase, in a system with a
large number of cores, a bottleneck in retrieving the current task
secid was detected:
27.73% ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
27.72% 0.01% [kernel.vmlinux] [k] security_current_getsecid_subj - -
27.71% security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
27.71% 27.68% [kernel.vmlinux] [k] apparmor_current_getsecid_subj - -
19.94% __refcount_add (inlined);__refcount_inc (inlined);refcount_inc (inlined);kref_get (inlined);aa_get_label (inlined);aa_get_label (inlined);aa_get_current_label (inlined);apparmor_current_getsecid_subj;security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
7.72% __refcount_sub_and_test (inlined);__refcount_dec_and_test (inlined);refcount_dec_and_test (inlined);kref_put (inlined);aa_put_label (inlined);aa_put_label (inlined);apparmor_current_getsecid_subj;security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
A large amount of time was spent in the refcount.
The most common case is that the current task label is available, and
no need to take references for that one. That is exactly what the
critical section helpers do, make use of them.
New perf output:
39.12% vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
39.07% 0.13% [kernel.vmlinux] [k] do_dentry_open - -
39.05% do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
38.71% 0.01% [kernel.vmlinux] [k] security_file_open - -
38.70% security_file_open;do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
38.65% 38.60% [kernel.vmlinux] [k] apparmor_file_open - -
38.65% apparmor_file_open;security_file_open;do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
The result is a throughput improvement of around 20% across the board
on the open2 testcase. On more realistic workloads the impact should
be much less.
[1] https://github.com/antonblanchard/will-it-scale
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
These functions are not used now, remove them.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The whole function is guarded by CONFIG_SECURITY_APPARMOR_EXPORT_BINARY,
so the #ifdef here is redundant, remove it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The existing implementation support only 32-bit DMA operation.
So, it fails to load the bitstream for the high DDR designs(Beyond 4GB).
To fix this issue update the DMA mask handling logic to support 44-bit
DMA operations.
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231003071409.4165149-1-nava.kishore.manne@amd.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Also drop of_match_ptr for of_ef_match, which is not necessary because DT
is always used for this driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231006224624.444857-1-robh@kernel.org
[yilun.xu@intel.com: drop of_match_ptr for of_ef_match]
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
drm-misc-next for v6.7-rc1:
Contains the previous pull request drm-misc-next-2023-10-06 + following:
Cross-subsystem Changes:
- Rename fb_pgprot to pgprot_framebuffer and remove file argument/
- Update iosys-map documentation typos.
Core Changes:
- Assorted fixes to drm/panel.
- Add HPD state to drm_connector_oob_hotplug_event(), and implement
oob hotplug events in bridge connector.
- Replace drm_framebuffer_plane_width/height with calls to
drm_format_info_plane_width/height.
Driver Changes:
- Clock and debug fixes for bridge/samsung-dsim.
- More btree -> maple tree conversions.
- Assorted bugfixes in rockchip, panel-tpo-tpg110,
- Add LTK050H3148W-CTA6 panel support.
- Assorted small fixes in host1x, tegra, simpledrm.
- Suspend fixes for host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3812345e-b086-4d72-8504-f58d84e8feab@linux.intel.com
Use drm_color_lut_extract() to avoid open-coding the bits reduction
calculations for each color channel and use a struct drm_color_lut
to temporarily store the information instead of an array of u32.
Also, slightly improve the precision of the HW LUT calculation in the
LUT DIFF case by performing the subtractions on the 16-bits values and
doing the 10 bits conversion later.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-5-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Newer SoCs support a bigger Gamma LUT table: wire up a callback
to retrieve the correct LUT size for each different Gamma IP.
Co-developed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Rewritten commit message/description + porting]
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Invert the check for state->gamma_lut and move it at the beginning
of the function to reduce indentation: this prepares the code for
keeping readability on later additions.
This commit brings no functional changes.
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Adjust the parameters in mtk_drm_gamma_set_common()
- add (struct device *dev) to get lut_diff from gamma's driver data
- remove (bool lut_diff) and use false as default value in the function
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Improve the function ata_dev_power_set_active() by having it do nothing
for a disk that is already in the active power state. To do that,
introduce the function ata_dev_power_is_active() to test the current
power state of the disk and return true if the disk is in the PM0:
active or PM1: idle state (0xff value for the count field of the CHECK
POWER MODE command output).
To preserve the existing behavior, if the CHECK POWER MODE command
issued in ata_dev_power_is_active() fails, the drive is assumed to be in
standby mode and false is returned.
With this change, issuing the VERIFY command to access the disk media to
spin it up becomes unnecessary most of the time during system resume as
the port reset done by libata-eh on resume often result in the drive to
spin-up (this behavior is not clearly defined by the ACS specifications
and may thus vary between disk models).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
The thermal_of_zone_register() function already prints an error message
when appropriate, so remove the extra one from the MAX77620 thermal
driver.
This fixes a spurious error message when no thermal zone was defined
for the MAX77620 in device tree.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231013155104.1781197-1-thierry.reding@gmail.com
Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx7d-gpt', 'fsl,imx6sx-gpt'] is too long
The driver has no special handling for fsl,imx7d-gpt, so fsl,imx6sx-gpt is
used. Therefore make imx7d GPT compatible to the imx6sx one to fix the
warning.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-4-alexander.stein@ew.tq-group.com
