Commit graph

1,233,462 commits

Author SHA1 Message Date
Zong-Zhe Yang
0f93824ed7 wifi: rtw89: 8852c: declare to support two chanctx
We are going to allow RTL8852C to support MCC (multi-channel concurrency).
So, we increase 8852c::support_chanctx_num up to 2.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-4-pkshih@realtek.com
2023-09-28 19:25:04 +03:00
Zong-Zhe Yang
5f499ce69b wifi: rtw89: pause/proceed MCC for ROC and HW scan
During (TDMA-based) MCC (multi-channel concurrency), the below two
cases might not have a good behavior on channel usage.
* ROC (remain on channel)
* HW scan
So, we tend to separate them from MCC.

The two cases would expect to operate the channel to which they want.
However, during MCC, channels are scheduled by FW MCC state mechanism.
So, channels cannot be controlled explicitly. To avoid the two cases
from operating wrong channels with chance, we pause MCC (essentially
stop FW MCC) once the two cases are coming. And then, we proceed MCC
again (essentially restart FW MCC) once the two cases finish.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-3-pkshih@realtek.com
2023-09-28 19:25:04 +03:00
Zong-Zhe Yang
a4d7c872eb wifi: rtw89: mcc: fix NoA start time when GO is auxiliary
Under TDMA-based MCC (multi-channel concurrency), there are two roles,
reference and auxiliary. We arrange MCC timeline based on time domain
of reference role. Then, we calculate NoA start time according to MCC
timeline.

Besides, when MCC runs GO+STA mode, we plan an offset between GO time
domain and STA time domain to make their TBTTs have a time gap.

However, if GO is auxiliary role instead of reference role, NoA start
time is described by STA time domain instead of GO time domain. To fix
this, we apply the offset mentioned above to NoA start time to convert
time domain from STA to GO.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-2-pkshih@realtek.com
2023-09-28 19:25:04 +03:00
Colin Ian King
b2172a9330 wifi: rt2x00: remove redundant check if u8 array element is less than zero
The check on vga_gain[ch_idx] being less than zero is always false since
vga_gain is a u8 array. Clean up the code by removing the check and the
following assignment. Cleans up clang scan build warning:

drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9704:26: warning:
result of comparison of unsigned expression < 0 is always
false [-Wtautological-unsigned-zero-compare]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920121240.120455-1-colin.i.king@gmail.com
2023-09-28 19:24:30 +03:00
Jeff Layton
dd1b202632 nfs: decrement nrequests counter before releasing the req
I hit this panic in testing:

[ 6235.500016] run fstests generic/464 at 2023-09-18 22:51:24
[ 6288.410761] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6288.412174] #PF: supervisor read access in kernel mode
[ 6288.413160] #PF: error_code(0x0000) - not-present page
[ 6288.413992] PGD 0 P4D 0
[ 6288.414603] Oops: 0000 [#1] PREEMPT SMP PTI
[ 6288.415419] CPU: 0 PID: 340798 Comm: kworker/u18:8 Not tainted 6.6.0-rc1-gdcf620ceebac #95
[ 6288.416538] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
[ 6288.417701] Workqueue: nfsiod rpc_async_release [sunrpc]
[ 6288.418676] RIP: 0010:nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.419836] Code: ff ff 48 8b 43 38 48 8b 7b 10 a8 04 74 5b 48 85 ff 74 56 48 8b 07 a9 00 00 08 00 74 58 48 8b 07 f6 c4 10 74 50 e8 c8 44 b3 d5 <48> 8b 00 f0 48 ff 88 30 ff ff ff 5b 5d 41 5c c3 cc cc cc cc 48 8b
[ 6288.422389] RSP: 0018:ffffbd618353bda8 EFLAGS: 00010246
[ 6288.423234] RAX: 0000000000000000 RBX: ffff9a29f9a25280 RCX: 0000000000000000
[ 6288.424351] RDX: ffff9a29f9a252b4 RSI: 000000000000000b RDI: ffffef41448e3840
[ 6288.425345] RBP: ffffef41448e3840 R08: 0000000000000038 R09: ffffffffffffffff
[ 6288.426334] R10: 0000000000033f80 R11: ffff9a2a7fffa000 R12: ffff9a29093f98c4
[ 6288.427353] R13: 0000000000000000 R14: ffff9a29230f62e0 R15: ffff9a29230f62d0
[ 6288.428358] FS:  0000000000000000(0000) GS:ffff9a2a77c00000(0000) knlGS:0000000000000000
[ 6288.429513] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6288.430427] CR2: 0000000000000000 CR3: 0000000264748002 CR4: 0000000000770ef0
[ 6288.431553] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6288.432715] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6288.433698] PKRU: 55555554
[ 6288.434196] Call Trace:
[ 6288.434667]  <TASK>
[ 6288.435132]  ? __die+0x1f/0x70
[ 6288.435723]  ? page_fault_oops+0x159/0x450
[ 6288.436389]  ? try_to_wake_up+0x98/0x5d0
[ 6288.437044]  ? do_user_addr_fault+0x65/0x660
[ 6288.437728]  ? exc_page_fault+0x7a/0x180
[ 6288.438368]  ? asm_exc_page_fault+0x22/0x30
[ 6288.439137]  ? nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.440112]  ? nfs_inode_remove_request+0xa0/0x150 [nfs]
[ 6288.440924]  nfs_commit_release_pages+0x16e/0x340 [nfs]
[ 6288.441700]  ? __pfx_call_transmit+0x10/0x10 [sunrpc]
[ 6288.442475]  ? _raw_spin_lock_irqsave+0x23/0x50
[ 6288.443161]  nfs_commit_release+0x15/0x40 [nfs]
[ 6288.443926]  rpc_free_task+0x36/0x60 [sunrpc]
[ 6288.444741]  rpc_async_release+0x29/0x40 [sunrpc]
[ 6288.445509]  process_one_work+0x171/0x340
[ 6288.446135]  worker_thread+0x277/0x3a0
[ 6288.446724]  ? __pfx_worker_thread+0x10/0x10
[ 6288.447376]  kthread+0xf0/0x120
[ 6288.447903]  ? __pfx_kthread+0x10/0x10
[ 6288.448500]  ret_from_fork+0x2d/0x50
[ 6288.449078]  ? __pfx_kthread+0x10/0x10
[ 6288.449665]  ret_from_fork_asm+0x1b/0x30
[ 6288.450283]  </TASK>
[ 6288.450688] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc nls_iso8859_1 nls_cp437 vfat fat 9p netfs ext4 kvm_intel crc16 mbcache jbd2 joydev kvm xfs irqbypass virtio_net pcspkr net_failover psmouse failover 9pnet_virtio cirrus drm_shmem_helper virtio_balloon drm_kms_helper button evdev drm loop dm_mod zram zsmalloc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel sha512_ssse3 sha512_generic virtio_blk nvme aesni_intel crypto_simd cryptd nvme_core t10_pi i6300esb crc64_rocksoft_generic crc64_rocksoft crc64 virtio_pci virtio virtio_pci_legacy_dev virtio_pci_modern_dev virtio_ring serio_raw btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq autofs4
[ 6288.460211] CR2: 0000000000000000
[ 6288.460787] ---[ end trace 0000000000000000 ]---
[ 6288.461571] RIP: 0010:nfs_inode_remove_request+0xc8/0x150 [nfs]
[ 6288.462500] Code: ff ff 48 8b 43 38 48 8b 7b 10 a8 04 74 5b 48 85 ff 74 56 48 8b 07 a9 00 00 08 00 74 58 48 8b 07 f6 c4 10 74 50 e8 c8 44 b3 d5 <48> 8b 00 f0 48 ff 88 30 ff ff ff 5b 5d 41 5c c3 cc cc cc cc 48 8b
[ 6288.465136] RSP: 0018:ffffbd618353bda8 EFLAGS: 00010246
[ 6288.465963] RAX: 0000000000000000 RBX: ffff9a29f9a25280 RCX: 0000000000000000
[ 6288.467035] RDX: ffff9a29f9a252b4 RSI: 000000000000000b RDI: ffffef41448e3840
[ 6288.468093] RBP: ffffef41448e3840 R08: 0000000000000038 R09: ffffffffffffffff
[ 6288.469121] R10: 0000000000033f80 R11: ffff9a2a7fffa000 R12: ffff9a29093f98c4
[ 6288.470109] R13: 0000000000000000 R14: ffff9a29230f62e0 R15: ffff9a29230f62d0
[ 6288.471106] FS:  0000000000000000(0000) GS:ffff9a2a77c00000(0000) knlGS:0000000000000000
[ 6288.472216] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6288.473059] CR2: 0000000000000000 CR3: 0000000264748002 CR4: 0000000000770ef0
[ 6288.474096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6288.475097] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6288.476148] PKRU: 55555554
[ 6288.476665] note: kworker/u18:8[340798] exited with irqs disabled

Once we've released "req", it's not safe to dereference it anymore.
Decrement the nrequests counter before dropping the reference.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-28 12:22:25 -04:00
Rob Herring
44a7f34dd8 dt-bindings: arm,psci: Add missing unevaluatedProperties on child node schemas
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926164553.102914-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-28 10:34:02 -05:00
Kalle Valo
9e61589ac3 wifi: ath11k: mac: fix struct ieee80211_sband_iftype_data handling
Commit e8c1841278 ("wifi: cfg80211: annotate iftype_data pointer with
sparse") added sparse checks for struct ieee80211_sband_iftype_data handling
which immediately found an issue in ath11k:

drivers/net/wireless/ath/ath11k/mac.c:7952:22: warning: incorrect type in argument 1 (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:7952:22:    expected struct ieee80211_sta_he_cap const *he_cap
drivers/net/wireless/ath/ath11k/mac.c:7952:22:    got struct ieee80211_sta_he_cap const [noderef] __iftype_data *

The problem here is that we are accessing sband->iftype_data directly even
though we should use for_each_sband_iftype_data() or similar. Fortunately
there's ieee80211_get_he_iftype_cap_vif() which is just what we need here so
use it to get HE capabilities.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230927142708.2897504-2-kvalo@kernel.org
2023-09-28 18:15:36 +03:00
Dmitry Antipov
4fd15bb705 wifi: ath11k: fix ath11k_mac_op_remain_on_channel() stack usage
When compiling with clang 16.0.6, I've noticed the following:

drivers/net/wireless/ath/ath11k/mac.c:8903:12: warning: stack frame
size (1032) exceeds limit (1024) in 'ath11k_mac_op_remain_on_channel'
[-Wframe-larger-than]
static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw,
           ^
68/1032 (6.59%) spills, 964/1032 (93.41%) variables

So switch to kzalloc()'ed instance of 'struct scan_req_params' like
it's done in 'ath11k_mac_op_hw_scan()'. Compile tested only.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230926042906.13725-1-dmantipov@yandex.ru
2023-09-28 18:15:06 +03:00
Kang Yang
ed823fd113 wifi: ath12k: add msdu_end structure for WCN7850
WCN7850 and QCN9274 currently use the same structure rx_msdu_end_qcn9274
for msdu_end. But content of msdu_end on WCN7850 is different from that of
QCN9274. Need to update it for WCN7850, otherwise will get the wrong
values when using it.

For example, TID is no longer in WCN7850's msdu_end. But
ath12k_dp_rx_process_err() and ath12k_dp_rx_process_wbm_err() still get
TID from msdu_end. So an uncertain value will be used in these two
functions on WCN7850.

Therefore, add new structure rx_msdu_end_wcn7850 for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230911093054.74943-1-quic_kangyang@quicinc.com
2023-09-28 18:12:36 +03:00
Sidhanta Sahu
c4cb46dfb2 wifi: ath12k: Set default beacon mode to burst mode
Currently, firmware does not like when beacon mode is set as staggered
mode for more than one beaconing vifs. Beacon mode for multiple
beaconing (transmitted) vifs are expected to be in burst mode. So set
beacon mode to burst mode by default.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905213943.12275-1-quic_sidhanta@quicinc.com
2023-09-28 18:11:59 +03:00
Aloka Dixit
43a1099040 wifi: ath12k: call ath12k_mac_fils_discovery() without condition
Mac80211 does not set flags BSS_CHANGED_FILS_DISCOVERY and
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP if there are no updates to
FILS discovery and unsolicited broadcast probe response transmission
configurations respectively. For BSS change operations such as channel
switch, this results in the transmissions getting stopped because the
driver does not send WMI command to firmware if the flags are not set.
Remove the checks for the flags to always send the existing
configuration to firmware.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905174324.25296-1-quic_alokad@quicinc.com
2023-09-28 18:09:59 +03:00
Wu Yunchuan
87fd060261 wifi: ath11k: remove unnecessary (void*) conversions
No need cast (void *) to (struct ath11k_base *),
struct hal_rx_msdu_link *), (struct ath11k_buffer_addr *) or
other types.

Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045150.524304-1-yunchuan@nfschina.com
2023-09-28 18:09:11 +03:00
Wen Gong
a1e09eb354 wifi: ath12k: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN7850
Currently mac80211 will send 3 scan request for each scan of WCN7850, they
are 2.4 GHz/5 GHz/6 GHz band scan. Firmware of WCN7850 will cache the RNR
IE(Reduced Neighbor Report element) which exist in the beacon of 2.4 GHz/5
GHz of the AP which is co-located with 6 GHz, and then use the cache to
scan in 6 GHz band scan if the 6 GHz scan is in the same scan with the 2.4
GHz/5 GHz band, this will helpful to search more AP of 6 GHz. Also it will
decrease the time cost of scan because firmware will use dual-band scan
for the 2.4 GHz/5 GHz, it means the 2.4 GHz and 5 GHz scans are doing
simultaneously.

Set the flag IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN7850 since it
supports 2.4 GHz/5 GHz/6 GHz in a single wiphy/ieee80211_hw.

This does not impact QCN9274, because it is not single_phy, so does not
have 2.4 GHz/5 GHz/6 GHz in the same wiphy, then it does not match the
condition and then IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS will not set for
QCN9274.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230913105507.17675-1-quic_wgong@quicinc.com
2023-09-28 18:08:04 +03:00
Wen Gong
c86ba8ee7e wifi: ath12k: change to treat alpha code na as world wide regdomain
Some firmware versions for WCN7850 report the default regdomain with
alpha code "na" by default when load as a world wide regdomain,
ath12k should treat it as a world wide alpha code.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906090355.19181-1-quic_wgong@quicinc.com
2023-09-28 18:06:50 +03:00
Wen Gong
870c6a7273 wifi: ath12k: indicate scan complete for scan canceled when scan running
ath12k prints "Received scan event for unknown vdev" when doing the
following test:
1. trigger scan
2. wait 0.2 second
3. iw reg set is issued or 11d scan complete event is sent from firmware

Reason is:
When iw reg set is issues or the 11d scan complete event is received, the
new country code will be set to the firmware, and the new regdomain info
indicated to ath12k, then the new channel list will be sent to the firmware.
The firmware will cancel the current scan after receiving WMI_SCAN_CHAN_LIST_CMDID
which is used for the new channel list, and the state of ath12k is
ATH12K_SCAN_RUNNING, then ath12k_get_ar_on_scan_abort() returns NULL and
ath12k_scan_event() returns at this point and does not indicate scan
completion to mac80211.

Indicate scan completion to mac80211 and get rid of the "Received scan
event for unknown vdev" print for the above case.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906085746.18968-1-quic_wgong@quicinc.com
2023-09-28 18:04:58 +03:00
Wen Gong
c2ebb1d11a wifi: ath12k: indicate to mac80211 scan complete with aborted flag for ATH12K_SCAN_STARTING state
Scan failure can not be recovered from when running a loop of the
following steps:
1. run scan: "iw wlan scan".
2. run command: echo assert > /sys/kernel/debug/ath12k/wcn7850\ hw2.0/simulate_fw_crash
   immediately after step 1.

result:
scan failed and can not recover even when wlan recovery succeeds:
command failed: Device or resource busy (-16)

reason:
When scan arrives, WMI_START_SCAN_CMDID is sent to the firmware and
function ath12k_mac_op_hw_scan() returns, then simulate_fw_crash arrives
and the scan started event does not arrive, and then it starts to do
recovery of wlan. __ath12k_mac_scan_finish() which is called from
ath12k_core_halt() is one step of recovery, it will not call
ieee80211_scan_completed() by logic currently because the scan state is
ATH12K_SCAN_STARTING. Thus it leads the scan not being completed in
mac80211, and leads all consecutive scans failing with -EBUSY in
nl80211_trigger_scan even after wlan recovery success.

Indicate scan complete with aborted flag to mac80211 for
ATH12K_SCAN_STARTING to allow recovery from scan failed with "Device or
resource busy (-16)" after wlan recovery.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905105947.10369-1-quic_wgong@quicinc.com
2023-09-28 18:02:38 +03:00
Wen Gong
ecbb987b0a wifi: ath12k: fix recovery fail while firmware crash when doing channel switch
When firmware crashed while channel switch running, recovery starts in
ath12k. Then ieee80211_sta_connection_lost() will be called by function
ieee80211_restart_work() in mac80211. And then many WMI command timeout
because firmware is crashed. Each WMI command cost 3 seconds, then the
total time will be large and leads recovery fail.

Hence change to set value ATH12K_FLAG_CRASH_FLUSH early and then
ath12k_wmi_cmd_send() will not wait 3 seconds, then recovery will be
started quickly and success.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905105229.10090-1-quic_wgong@quicinc.com
2023-09-28 18:01:12 +03:00
Lingbo Kong
004ccbc0dd wifi: ath12k: add support for hardware rfkill for WCN7850
When hardware rfkill is enabled in the firmware, it will report the
capability using WMI_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY event
to the host. Currently ath12k does not process this service capability. In
order to support this, update ath12k to check if the capability is enabled,
if so, send the GPIO information to firmware. When the firmware detects
hardware rfkill is enabled by the user, it will report it using
WMI_RFKILL_STATE_CHANGE_EVENTID. When ath12k receive the event, it will set
the value of rfkill_radio_on based on whether radio_state is equal to
WMI_RFKILL_RADIO_STATE_ON, then send WMI_PDEV_PARAM_RFKILL_ENABLE to
firmware.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906110412.182176-1-quic_lingbok@quicinc.com
2023-09-28 17:59:41 +03:00
Jinjie Ruan
8040345fda kunit: test: Fix the possible memory leak in executor_test
When CONFIG_KUNIT_ALL_TESTS=y, making CONFIG_DEBUG_KMEMLEAK=y and
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.

If kunit_filter_suites() succeeds, not only copy but also filtered_suite
and filtered_suite->test_cases should be freed.

So as Rae suggested, to avoid the suite set never be freed when
KUNIT_ASSERT_EQ() fails and exits after kunit_filter_suites() succeeds,
update kfree_at_end() func to free_suite_set_at_end() to use
kunit_free_suite_set() to free them as kunit_module_exit() and
kunit_run_all_tests() do it. As the second arg got of
free_suite_set_at_end() is a local variable, copy it for free to avoid
wild-memory-access. After applying this patch, the following memory leak
is never detected.

unreferenced object 0xffff8881001de400 (size 1024):
  comm "kunit_try_catch", pid 1396, jiffies 4294720452 (age 932.801s)
  hex dump (first 32 bytes):
    73 75 69 74 65 32 00 00 00 00 00 00 00 00 00 00  suite2..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829e961d>] kunit_filter_suites+0x44d/0xcc0
    [<ffffffff829eb69f>] filter_suites_test+0x12f/0x360
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cd388 (size 192):
  comm "kunit_try_catch", pid 1396, jiffies 4294720452 (age 932.801s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff 80 cd 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829e9651>] kunit_filter_suites+0x481/0xcc0
    [<ffffffff829eb69f>] filter_suites_test+0x12f/0x360
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20

unreferenced object 0xffff888100da8400 (size 1024):
  comm "kunit_try_catch", pid 1398, jiffies 4294720454 (age 781.945s)
  hex dump (first 32 bytes):
    73 75 69 74 65 32 00 00 00 00 00 00 00 00 00 00  suite2..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829e961d>] kunit_filter_suites+0x44d/0xcc0
    [<ffffffff829eb13f>] filter_suites_test_glob_test+0x12f/0x560
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888105117878 (size 96):
  comm "kunit_try_catch", pid 1398, jiffies 4294720454 (age 781.945s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff a0 ac 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829e9651>] kunit_filter_suites+0x481/0xcc0
    [<ffffffff829eb13f>] filter_suites_test_glob_test+0x12f/0x560
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888102c31c00 (size 1024):
  comm "kunit_try_catch", pid 1404, jiffies 4294720460 (age 781.948s)
  hex dump (first 32 bytes):
    6e 6f 72 6d 61 6c 5f 73 75 69 74 65 00 00 00 00  normal_suite....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829ecf17>] kunit_filter_attr_tests+0xf7/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829ea975>] filter_attr_test+0x195/0x5f0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cd250 (size 192):
  comm "kunit_try_catch", pid 1404, jiffies 4294720460 (age 781.948s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff 00 a9 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829ecfc1>] kunit_filter_attr_tests+0x1a1/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829ea975>] filter_attr_test+0x195/0x5f0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888104f4e400 (size 1024):
  comm "kunit_try_catch", pid 1408, jiffies 4294720464 (age 781.944s)
  hex dump (first 32 bytes):
    73 75 69 74 65 00 00 00 00 00 00 00 00 00 00 00  suite...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829ecf17>] kunit_filter_attr_tests+0xf7/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829e9fc3>] filter_attr_skip_test+0x133/0x6e0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cc620 (size 192):
  comm "kunit_try_catch", pid 1408, jiffies 4294720464 (age 781.944s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff c0 a8 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 02 00 00 00 02 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829ecfc1>] kunit_filter_attr_tests+0x1a1/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829e9fc3>] filter_attr_skip_test+0x133/0x6e0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20

Fixes: e5857d396f ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Fixes: 76066f93f1 ("kunit: add tests for filtering attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Suggested-by: David Gow <davidgow@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309142251.uJ8saAZv-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202309270433.wGmFRGjd-lkp@intel.com/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-28 08:51:07 -06:00
Jinjie Ruan
24de14c98b kunit: Fix possible memory leak in kunit_filter_suites()
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the filtered_suite and filtered_suite->test_cases
allocated in the last kunit_filter_attr_tests() in last inner for loop
is leaked.

So add a new free_filtered_suite err label and free the filtered_suite
and filtered_suite->test_cases so far. And change kmalloc_array of copy
to kcalloc to Clear the copy to make the kfree safe.

Fixes: 529534e8cb ("kunit: Add ability to filter attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-28 08:51:02 -06:00
Jinjie Ruan
e44679515a kunit: Fix the wrong kfree of copy for kunit_filter_suites()
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the copy pointer has been moved. So it should free
the original copy's backup copy_start.

Fixes: abbf73816b ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-28 08:50:57 -06:00
Jinjie Ruan
a6074cf012 kunit: Fix missed memory release in kunit_free_suite_set()
modprobe cpumask_kunit and rmmod cpumask_kunit, kmemleak detect
a suspected memory leak as below.

If kunit_filter_suites() in kunit_module_init() succeeds, the
suite_set.start will not be NULL and the kunit_free_suite_set() in
kunit_module_exit() should free all the memory which has not
been freed. However the test_cases in suites is left out.

unreferenced object 0xffff54ac47e83200 (size 512):
  comm "modprobe", pid 592, jiffies 4294913238 (age 1367.612s)
  hex dump (first 32 bytes):
    84 13 1a f0 d3 b6 ff ff 30 68 1a f0 d3 b6 ff ff  ........0h......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000008dec63a2>] slab_post_alloc_hook+0xb8/0x368
    [<00000000ec280d8e>] __kmem_cache_alloc_node+0x174/0x290
    [<00000000896c7740>] __kmalloc+0x60/0x2c0
    [<000000007a50fa06>] kunit_filter_suites+0x254/0x5b8
    [<0000000078cc98e2>] kunit_module_notify+0xf4/0x240
    [<0000000033cea952>] notifier_call_chain+0x98/0x17c
    [<00000000973d05cc>] notifier_call_chain_robust+0x4c/0xa4
    [<000000005f95895f>] blocking_notifier_call_chain_robust+0x4c/0x74
    [<0000000048e36fa7>] load_module+0x1a2c/0x1c40
    [<0000000004eb8a91>] init_module_from_file+0x94/0xcc
    [<0000000037dbba28>] idempotent_init_module+0x184/0x278
    [<00000000161b75cb>] __arm64_sys_finit_module+0x68/0xa8
    [<000000006dc1669b>] invoke_syscall+0x44/0x100
    [<00000000fa87e304>] el0_svc_common.constprop.1+0x68/0xe0
    [<000000009d8ad866>] do_el0_svc+0x1c/0x28
    [<000000005b83c607>] el0_svc+0x3c/0xc4

Fixes: a127b154a8 ("kunit: tool: allow filtering test cases via glob")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-28 08:50:51 -06:00
Sudeep Holla
55d235ebb6 ACPI: PCC: Add PCC shared memory region command and status bitfields
Define the common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields.

Currently different drivers that need to use these bitfields have defined
these locally. This common macro is intended to consolidate and replace
those.

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230927-pcc_defines-v2-1-0b8ffeaef2e5@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-28 15:48:48 +01:00
Jingbo Xu
3048102d9d erofs: update documentation
- update new features like bloom filter and DEFLATE.

 - add documentation for the long xattr name prefixes, which was
   landed upstream since v6.4.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230928134852.31118-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-09-28 22:40:14 +08:00
Chuck Lever
0d32a6bbb8 NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set
nfsd4_encode_readv() uses xdr->buf->page_len as a starting point for
the nfsd_iter_read() sink buffer -- page_len is going to be offset
by the parts of the COMPOUND that have already been encoded into
xdr->buf->pages.

However, that value must be captured /before/
xdr_reserve_space_vec() advances page_len by the expected size of
the read payload. Otherwise, the whole front part of the first
page of the payload in the reply will be uninitialized.

Mantas hit this because sec=krb5i forces RQ_SPLICE_OK off, which
invokes the readv part of the nfsd4_encode_read() path. Also,
older Linux NFS clients appear to send shorter READ requests
for files smaller than a page, whereas newer clients just send
page-sized requests and let the server send as many bytes as
are in the file.

Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/f1d0b234-e650-0f6e-0f5d-126b3d51d1eb@gmail.com/
Fixes: 703d752155 ("NFSD: Hoist rq_vec preparation into nfsd_read() [step two]")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-09-28 10:34:28 -04:00
Phil Sutter
013714bf3e netfilter: nf_tables: Utilize NLA_POLICY_NESTED_ARRAY
Mark attributes which are supposed to be arrays of nested attributes
with known content as such. Originally suggested for
NFTA_RULE_EXPRESSIONS only, but does apply to others as well.

Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-09-28 16:31:29 +02:00
Pablo Neira Ayuso
aee1f692bf netfilter: nf_tables: missing extended netlink error in lookup functions
Set netlink extended error reporting for several lookup functions which
allows userspace to infer what is the error cause.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-09-28 16:25:42 +02:00
Florian Westphal
117e149e26 selftests: netfilter: test nat source port clash resolution interaction with tcp early demux
Test that nat engine resolves the source port clash and tcp packet
is passed to the correct socket.

While at it, get rid of the iperf3 dependency, just use socat for
listener side too.

Signed-off-by: Florian Westphal <fw@strlen.de>
2023-09-28 16:25:42 +02:00
Florian Westphal
e27c329511 netfilter: nf_nat: undo erroneous tcp edemux lookup after port clash
In commit 03a3ca37e4 ("netfilter: nf_nat: undo erroneous tcp edemux lookup")
I fixed a problem with source port clash resolution and DNAT.

A very similar issue exists with REDIRECT (DNAT to local address) and
port rewrites.

Consider two port redirections done at prerouting hook:

-p tcp --port 1111 -j REDIRECT --to-ports 80
-p tcp --port 1112 -j REDIRECT --to-ports 80

Its possible, however unlikely, that we get two connections sharing
the same source port, i.e.

saddr:12345 -> daddr:1111
saddr:12345 -> daddr:1112

This works on sender side because destination address is
different.

After prerouting, nat will change first syn packet to
saddr:12345 -> daddr:80, stack will send a syn-ack back and 3whs
completes.

The second syn however will result in a source port clash:
after dnat rewrite, new syn has

saddr:12345 -> daddr:80

This collides with the reply direction of the first connection.

The NAT engine will handle this in the input nat hook by
also altering the source port, so we get for example

saddr:13535 -> daddr:80

This allows the stack to send back a syn-ack to that address.
Reverse NAT during POSTROUTING will rewrite the packet to
daddr:1112 -> saddr:12345 again. Tuple will be unique on-wire
and peer can process it normally.

Problem is when ACK packet comes in:

After prerouting, packet payload is mangled to saddr:12345 -> daddr:80.
Early demux will assign the 3whs-completing ACK skb to the first
connections' established socket.

This will then elicit a challenge ack from the first connections'
socket rather than complete the connection of the second.
The second connection can never complete.

Detect this condition by checking if the associated sockets port
matches the conntrack entries reply tuple.

If it doesn't, then input source address translation mangled
payload after early demux and the found sk is incorrect.

Discard this sk and let TCP stack do another lookup.

Signed-off-by: Florian Westphal <fw@strlen.de>
2023-09-28 16:25:42 +02:00
Liang Chen
7c7dd1d649 pktgen: Introducing 'SHARED' flag for testing with non-shared skb
Currently, skbs generated by pktgen always have their reference count
incremented before transmission, causing their reference count to be
always greater than 1, leading to two issues:
  1. Only the code paths for shared skbs can be tested.
  2. In certain situations, skbs can only be released by pktgen.
To enhance testing comprehensiveness, we are introducing the "SHARED"
flag to indicate whether an SKB is shared. This flag is enabled by
default, aligning with the current behavior. However, disabling this
flag allows skbs with a reference count of 1 to be transmitted.
So we can test non-shared skbs and code paths where skbs are released
within the stack.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-2-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-28 16:25:14 +02:00
Liang Chen
057708a9ca pktgen: Automate flag enumeration for unknown flag handling
When specifying an unknown flag, it will print all available flags.
Currently, these flags are provided as fixed strings, which requires
manual updates when flags change. Replacing it with automated flag
enumeration.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-1-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-28 16:25:14 +02:00
Dmitry Antipov
458f66c30d wifi: ath11k: use kstrtoul_from_user() where appropriate
Use 'kstrtoul_from_user()' in 'ath11k_write_file_spectral_count()'
and 'ath11k_write_file_spectral_bins()'

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230824075121.121144-4-dmantipov@yandex.ru
2023-09-28 17:18:15 +03:00
Amadeusz Sławiński
b5d5c87986
ASoC: doc: Update codec to codec examples
There are examples in documentation for codec to codec connection.
However they show method before recent series of patches which renamed
the fields. Update documentation accordingly.

Fixes: 7ddc7f91be ("ASoC: soc.h: clarify Codec2Codec params")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230928134706.662947-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-28 16:04:13 +02:00
Flavio Suligoi
02c4e66165 dt-bindings: backlight: Add MPS MP3309C
The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
programmable switching frequency to optimize efficiency.
The brightness can be controlled either by I2C commands (called "analog"
mode) or by a PWM input signal (PWM mode).
This driver supports both modes.

For device driver details, please refer to:
- drivers/video/backlight/mp3309c_bl.c

The datasheet is available at:
- https://www.monolithicpower.com/en/mp3309c.html

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230925122609.78849-1-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
2023-09-28 15:03:06 +01:00
Harini Katakam
19f5eef8bf MAINTAINERS: Add an obsolete entry for LL TEMAC driver
LL TEMAC IP is no longer supported. Hence add an entry marking the
driver as obsolete.

Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20230920115047.31345-1-harini.katakam@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-28 15:55:14 +02:00
Jens Axboe
52e856c387 Merge branch 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into io_uring-futex
Pull in locking/core from the tip tree, to get the futex2 dependencies
from Peter Zijlstra.

* 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  locking/ww_mutex/test: Make sure we bail out instead of livelock
  locking/ww_mutex/test: Fix potential workqueue corruption
  locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
  futex: Add sys_futex_requeue()
  futex: Add flags2 argument to futex_requeue()
  futex: Propagate flags into get_futex_key()
  futex: Add sys_futex_wait()
  futex: FLAGS_STRICT
  futex: Add sys_futex_wake()
  futex: Validate futex value against futex size
  futex: Flag conversion
  futex: Extend the FUTEX2 flags
  futex: Clarify FUTEX2 flags
  asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()
  futex/pi: Fix recursive rt_mutex waiter state
  locking/rtmutex: Add a lockdep assert to catch potential nested blocking
  locking/rtmutex: Use rt_mutex specific scheduler helpers
  sched: Provide rt_mutex specific scheduler helpers
  sched: Extract __schedule_loop()
  locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES
  ...
2023-09-28 07:47:07 -06:00
Jens Axboe
73c7e7a91f Merge branch 'for-6.7/io_uring' into io_uring-futex
* for-6.7/io_uring:
  io_uring: cancelable uring_cmd
  io_uring: retain top 8bits of uring_cmd flags for kernel internal use
  io_uring: add IORING_OP_WAITID support
  exit: add internal include file with helpers
  exit: add kernel_waitid_prepare() helper
  exit: move core of do_wait() into helper
  exit: abstract out should_wake helper for child_wait_callback()
  io_uring/rw: add support for IORING_OP_READ_MULTISHOT
  io_uring/rw: mark readv/writev as vectored in the opcode definition
  io_uring/rw: split io_read() into a helper
2023-09-28 07:46:55 -06:00
Paolo Abeni
416a01a4da mlx5-updates-2023-09-19
Misc updates for mlx5 driver
 
 1) From Erez, Add support for multicast forwarding to multi destination
    in bridge offloads with software steering mode (SMFS).
 
 2) From Jianbo, Utilize the maximum aggregated link speed for police
    action rate.
 
 3) From Moshe, Add a health error syndrome for pci data poisoned
 
 4) From Shay, Enable 4 ports multiport E-switch
 
 5) From Jiri, Trivial SF code cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmUKkiUACgkQSD+KveBX
 +j6HnwgAgeK+RwWac/FRPmA0cKZmQQm8JXmaSYBkfDHl+F6IYjysxOGmEw9E6p96
 Xmpw9DQxLdJ9Qm+qCPVSop5IhDObJBhMwbJV6QWuc47sgLPBxj/EVZxDeEDTobsZ
 zjWVbdmpvUPnc3ktERszCmI5PLR/fsj2+gWuvj4m0tvDDO6SC7xp2QCs11AdfThn
 jax7nE7YoOrJw4iUFD9FRFbRJwdmWKeYTQCj0ZJljAhYv33MIp95SYTe/NGgXRqK
 ssZ7eDyCR3xP2DJdnO83VbcU79Dis3kcQP21HD2CjbN6nFMkFjqste/ArUcD16n1
 Nf0SIOPj1PHOX4xOgly+iQL1bZRVpg==
 =D/YM
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2023-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2023-09-19

Misc updates for mlx5 driver

1) From Erez, Add support for multicast forwarding to multi destination
   in bridge offloads with software steering mode (SMFS).

2) From Jianbo, Utilize the maximum aggregated link speed for police
   action rate.

3) From Moshe, Add a health error syndrome for pci data poisoned

4) From Shay, Enable 4 ports multiport E-switch

5) From Jiri, Trivial SF code cleanup

====================

Link: https://lore.kernel.org/r/20230920063552.296978-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-28 15:45:25 +02:00
Ming Lei
93b8cc60c3 io_uring: cancelable uring_cmd
uring_cmd may never complete, such as ublk, in which uring cmd isn't
completed until one new block request is coming from ublk block device.

Add cancelable uring_cmd to provide mechanism to driver for cancelling
pending commands in its own way.

Add API of io_uring_cmd_mark_cancelable() for driver to mark one command as
cancelable, then io_uring will cancel this command in
io_uring_cancel_generic(). ->uring_cmd() callback is reused for canceling
command in driver's way, then driver gets notified with the cancelling
from io_uring.

Add API of io_uring_cmd_get_task() to help driver cancel handler
deal with the canceling.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-28 07:36:00 -06:00
Ming Lei
528ce67817 io_uring: retain top 8bits of uring_cmd flags for kernel internal use
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-28 07:31:41 -06:00
Mark Brown
37b4346ed8
ASoC: codecs: Add aw87390 amplifier driver
Merge series from wangweidong.a@awinic.com:

The awinic aw87390 is a new high efficiency, low noise,
constant large volume, 6th Smart K audio amplifier.
2023-09-28 15:22:35 +02:00
Mark Brown
54ac512048
ASoC: codecs: rtq9128: Add TDM input source select
Merge series from cy_huang@richtek.com:

This patch series create a TDM source select property and use it to
decide which TDM data source is connected.

Following by the below patch disccuion
https://lore.kernel.org/lkml/1695780376-32301-1-git-send-email-cy_huang@richtek.com/#t
It may not be a good choice to add the user controlable mixer control
item. Since it follows the board design, make it as a device property.
2023-09-28 14:42:32 +02:00
Damien Le Moal
49728bdc70 ata: libata-eh: Fix compilation warning in ata_eh_link_report()
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:

drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                           ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                        ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2372 |                          ap->eh_tries);
      |                          ~~~~~~~~~~~~~

Avoid this warning by increasing the string size to 16B.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:24:18 +09:00
Damien Le Moal
ed518d9ba9 ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:

drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                                        ^~
In function ‘ata_dev_config_ncq’,
    inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
    inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                         ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2379 |                         ddepth, aa_desc);
      |                         ~~~~~~~~~~~~~~~~

Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:24:10 +09:00
Damien Le Moal
99398d2070 scsi: sd: Do not issue commands to suspended disks on shutdown
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.

Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().

Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:23:18 +09:00
Damien Le Moal
75e2bd5f1e ata: libata-core: Do not register PM operations for SAS ports
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).

Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.

Fixes: 2fcbdcb4c8 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:23:14 +09:00
Damien Le Moal
8b4d9469d0 ata: libata-scsi: Fix delayed scsi_rescan_device() execution
Commit 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
   device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
   not atomic and a suspend PM event may be triggered between them,
   casuing scsi_rescan_device() to be called on a suspended device and
   in that function blocking while holding the scsi device lock. This
   would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:

for (( i=0; i<10; i++ )); do
	echo "+2 > /sys/class/rtc/rtc0/wakealarm
	echo mem > /sys/power/state
done

that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.

Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.

Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:23:10 +09:00
Damien Le Moal
ff48b37802 scsi: Do not attempt to rescan suspended devices
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.

Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.

The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.

Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
2023-09-28 21:23:07 +09:00
Damien Le Moal
aa3998dbeb ata: libata-scsi: Disable scsi device manage_system_start_stop
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.

For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.

However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.

Commit 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.

Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.

To do this, the following libata helper functions are introduced:

1) ata_dev_power_set_standby():

This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.

For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.

2) ata_dev_power_set_active() and

This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.

For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.

With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.

Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:23:03 +09:00
Damien Le Moal
3cc2ffe5c1 scsi: sd: Differentiate system and runtime start/stop management
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.

For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.

Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.

Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28 21:23:00 +09:00