Single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not. Reduce the problems of
incorrectly using CDL commands on older devices by checking SCSI spec
compliance at SPC-5 (the spec which introduced the command) before
turning on CDL.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZRQglCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYJdAP4rjE8a
/X3Vs7C0PoFDl6HlkN3w4Eeq54vLMmxNez2tywEA6cB3RdwG58g34p8wBt7Lb6UI
1HAIhRub2mpHZyQH0/U=
=qq6Q
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not.
Reduce the problems of incorrectly using CDL commands on older devices
by checking SCSI spec compliance at SPC-5 (the spec which introduced
the command) before turning on CDL"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: ata: Do no try to probe for CDL on old drives
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access. (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned. (Jinjie Ruan)
-----BEGIN PGP SIGNATURE-----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=yMVA
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned (Jinjie Ruan)
* tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
vfio/pds: Use proper PF device access helper
vfio/pds: Add missing PCI_IOV depends
After a recent change, two variables are only used in an #ifdef:
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function 'nv50_sor_atomic_disable':
drivers/gpu/drm/nouveau/dispnv50/disp.c:1569:13: error: unused variable 'ret' [-Werror=unused-variable]
1569 | int ret;
| ^~~
drivers/gpu/drm/nouveau/dispnv50/disp.c:1568:28: error: unused variable 'aux' [-Werror=unused-variable]
1568 | struct drm_dp_aux *aux = &nv_connector->aux;
| ^~~
Move them into the same conditional block, along with the nv_connector variable
that becomes unused during that fix.
Fixes: 757033808c ("drm/nouveau/kms/nv50-: fixup sink D3 before tearing down link")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925155930.677620-1-arnd@kernel.org
Changing the direct dependencies of IMA_BLACKLIST_KEYRING and
IMA_LOAD_X509 caused them to no longer depend on IMA, but a
a configuration without IMA results in link failures:
arm-linux-gnueabi-ld: security/integrity/iint.o: in function `integrity_load_keys':
iint.c:(.init.text+0xd8): undefined reference to `ima_load_x509'
aarch64-linux-ld: security/integrity/digsig_asymmetric.o: in function `asymmetric_verify':
digsig_asymmetric.c:(.text+0x104): undefined reference to `ima_blacklist_keyring'
Adding explicit dependencies on IMA would fix this, but a more reliable
way to do this is to enclose the entire Kconfig file in an 'if IMA' block.
This also allows removing the existing direct dependencies.
Fixes: be210c6d35 ("ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Normally we could be in a deep PkgC state all the way up to the
point when DSB starts its execution at the transcoders undelayed
vblank. The DSB will then have to wait for the hardware to
wake up before it can execute anything. This will waste a huge
chunk of the vblank time just waiting, and risks the DSB execution
spilling into the vertical active period. That will be very bad,
especially when programming the LUTs as the anti-collision logic
will cause DSB to corrupt LUT writes during vertical active.
To avoid these problems we can instruct the DSB to pre-wake the
display engine on a specific scanline so that everything will
be 100% ready to go when we hit the transcoder's undelayed vblank.
One annoyance is that the scanline is specified as just that,
a single scanline. So if we happen to start the DSB execution
after passing said scanline no DEwake will happen and we may drop
back into some PkgC state before reaching the transcoder's undelayed
vblank. To prevent that we'll use the "force DEwake" bit to manually
force the display engine to stay awake. We'll then have to clear
the force bit again after the DSB is done (the force bit remains
effective even when the DSB is otherwise disabled).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-18-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Add a helper to convert our idea of a scanline to the hw's idea
of the same scanline (ie. apply crtc->scanline_offset in reverse).
We'll need this to tell the DSB do stuff on a specific scanline.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-17-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We want to start the DSB execution from the transcoder's undelayed
vblank, so in order to guarantee atomicity with the all the other
mmio register writes we need to evade both vblanks.
Note that currently we don't add any vblank delay, so this is
effectively a nop. But in the future when we start to program
double buffered registers from the DSB we'll need to delay the
pipe's vblank to provide the register programming "window2"
for the DSB.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-15-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The DSB has problems writing the legacy LUT. The two workarounds
I've discoverted are:
- write each entry twice back to back
- use non-posted writes
Let's use non-posted writes as that seems a bit more standard.
TODO: measure which is faster
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-14-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Loading LUTs with the DSB outside of vblank doesn't really
work due to the palette anti-collision logic. Apparently the
DSB register writes don't get stalled like CPU mmio writes
do and instead we end up corrupting the LUT entries. Disabling
the anti-collision logic would allow us to successfully load
the LUT outside of vblank, but presumably that risks the LUT
reads from the scanout (temporarily) getting corrupted data
from the LUT instead.
The anti-collision logic isn't active during vblank so that
is when we can successfully load the LUT with the DSB. That is
what we want to do anyway to avoid tearing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-13-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Avoid the locking overhead for DSB registers. We don't need the locks
and intel_dsb_commit() in particular needs to be called from the
vblank evade critical section and thus needs to be fast.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
When device_register() fails, zfcp_port_release() will be called after
put_device(). As a result, zfcp_ccw_adapter_put() will be called twice: one
in zfcp_port_release() and one in the error path after device_register().
So the reference on the adapter object is doubly put, which may lead to a
premature free. Fix this by adjusting the error tag after
device_register().
Fixes: f3450c7b91 ("[SCSI] zfcp: Replace local reference counting with common kref")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230923103723.10320-1-dinghao.liu@zju.edu.cn
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.33+
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tcmu_tmr.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175300.work.148-kees@kernel.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the UFS device execute realtime (RT) requests before other requests.
This will be used in Android to reduce the I/O latency of the foreground
app.
Note: UFS devices do not support CDL so using CDL is not a viable
alternative.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-5-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_comp_scsi_upiu() has one caller and that caller ensures that
lrbp->cmd != NULL. Hence leave out the lrbp->cmd check from
ufshcd_comp_scsi_upiu().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-4-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DMA alignment for the Exynos controller follows directly from the PRDT
segment size configured in ufs-exynos.c. Hence, move the DMA alignment code
into the Exynos driver source code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The block layer core guarantees that tag numbers are in the expected
range. Hence remove the statements that check this. This patch suppresses
Coverity warnings about left shifts with a negative right hand operand.
The following commit originally introduced request tag range checks:
14497328b6 ("scsi: ufs: verify command tag validity").
Cc: daejun7.park@samsung.com
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-2-bvanassche@acm.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bug fix to correct return value of gxp_spi_write function to zero.
Completion of succesful operation should return zero.
Fixes: 730bc8ba5e spi: spi-gxp: Add support for HPE GXP SoCs
Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sg_reset performs a target or LUN reset. Since the command is issued by the
user, it does not come into the driver with a tag or a queue id. Fix the
fnic driver to create an io_req and use a SCSI command tag. Fix the ITMF
path to special case the sg_reset response.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20230919182436.6895-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All the caller has been removed since commit 336f560a89 ("x86/xen: don't
let xen_pv_play_dead() return")
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230912104406.312185-5-frederic@kernel.org
In lowres dynticks mode, just like in highres dynticks mode, when there
is no tick to program in the future, the tick eventually gets
deactivated either:
* From the idle loop if in idle mode.
* From the IRQ exit if in full dynticks mode.
Therefore there is no need to deactivate it from the tick itself. This
just just brings more overhead in the idle tick path for no reason.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20230912104406.312185-4-frederic@kernel.org
Some comments are obsolete enough to assume that IRQ exit restarts the
tick in idle or RCU is turned on at the same time as the tick, among
other details.
Update them and add more.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230912104406.312185-3-frederic@kernel.org
The current names of the tick handlers don't tell much about what different
between them. Use names that better reflect their role and resolution.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230912104406.312185-2-frederic@kernel.org
The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().
PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx"
#0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364
Fixes: 36d4cb460b ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Specific stress involving frequent CPU-hotplug operations, such as
running rcutorture for example, may trigger the following message:
NOHZ tick-stop error: local softirq work is pending, handler #02!!!"
This happens in the CPU-down hotplug process, after
CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and
before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this
fragile intermediate state, softirqs waiting for threaded handling may be
forever ignored and eventually reported by the idle task as in the above
example.
However some vectors are known to be safe as long as the corresponding
subsystems have teardown callbacks handling the migration of their
events. The above error message reports pending timers softirq although
this vector can be considered as hotplug safe because the
CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration
of timers after the death of the CPU. Hrtimers also have a similar
hotplug handling.
Therefore this error message, as far as (hr-)timers are concerned, can
be considered spurious and the relevant softirq vectors can be marked as
hotplug safe.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org
Free "tz" if the "trip" allocation fails.
Fixes: 5fc2189f9335 ("ACPI: thermal: Create and populate trip points table earlier")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is very confusing to use *_v2 for everything applicable until SCMI
clock protocol version v2.0 including v1.0 for example. So let us rename
such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also
add comment to indicate the same explicitly.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This is to cater the need for non-ACPI system whereby
a platform device has to be created in order to bind
with the Denverton pinctrl platform driver.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Both pc->async_powercap_cap_set and ignore_dresp are already boolean.
Use of !! on them is obviously dubious.
Sparse reports:
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
Remove the unnecessary !! and get rid of the warning.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230921085257.3125744-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We have a special place for OF polarity quirks in gpiolib-of.c. Let's
move this over there so that it doesn't pollute the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Commit ade8a0f598 ("drm/i915: Make all GPU resets atomic") added a
preempt disable section over the hardware reset callback to prepare the
driver for being able to reset from atomic contexts.
In retrospect I can see that the work item at a time was about removing
the struct mutex from the reset path. Code base also briefly entertained
the idea of doing the reset under stop_machine in order to serialize
userspace mmap and temporary glitch in the fence registers (see
eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex"),
but that never materialized and was soon removed in 2caffbf117
("drm/i915: Revoke mmaps and prevent access to fence registers across
reset") and replaced with a SRCU based solution.
As such, as far as I can see, today we still have a requirement that
resets must not sleep (invoked from submission tasklets), but no need to
support invoking them from a truly atomic context.
Given that the preemption section is problematic on RT kernels, since the
uncore lock becomes a sleeping lock and so is invalid in such section,
lets try and remove it. Potential downside is that our short waits on GPU
to complete the reset may get extended if CPU scheduling interferes, but
in practice that probably isn't a deal breaker.
In terms of mechanics, since the preemption disabled block is being
removed we just need to replace a few of the wait_for_atomic macros into
busy looping versions which will work (and not complain) when called from
non-atomic sections.
v2:
* Fix timeouts which are now in us. (Andi)
* Update one comment as a drive by. (Andi)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926100855.61722-1-tvrtko.ursulin@linux.intel.com
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The OEMID is an 8-bit binary number rather than 16-bit as the current code
parses for. The OEMID occupies bits [111:104] in the CID register, see the
eMMC spec JESD84-B51 paragraph 7.2.3. It seems that the 16-bit comes from
the legacy MMC specs (v3.31 and before).
Let's fix the parsing by simply move to use 8-bit instead of 16-bit. This
means we ignore the impact on some of those old MMC cards that may be out
there, but on the other hand this shouldn't be a problem as the OEMID seems
not be an important feature for these cards.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230927071500.1791882-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>