Since the previous patch change to only account active requests when
we really allocate the driver tag, the RQF_MQ_INFLIGHT can be removed
and no double account problem.
1. none elevator: flush request will use the first pending request's
driver tag, won't double account.
2. other elevator: flush request will be accounted when allocate driver
tag when issue, and will be unaccounted when it put the driver tag.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-3-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a limit that batched queue_rqs() can't work on shared tags
queue, since the account of active requests can't be done there.
Now we account the active requests only in blk_mq_get_driver_tag(),
which is not the time we get driver tag actually (with none elevator).
To support batched queue_rqs() on shared tags queue, we move the
account of active requests to where we get the driver tag:
1. none elevator: blk_mq_get_tags() and blk_mq_get_tag()
2. other elevator: __blk_mq_alloc_driver_tag()
This is clearer and match with the unaccount side, which just happen
when we put the driver tag.
The other good point is that we don't need RQF_MQ_INFLIGHT trick
anymore, which used to avoid double account of flush request.
Now we only account when actually get the driver tag, so all is good.
We will remove RQF_MQ_INFLIGHT in the next patch.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently provide the physical address of the DMA region
rather than the output of dma_map_resource() which is obviously wrong.
Fixes: 7330fc505a ("mtd: rawnand: qcom: stop using phys_to_dma()")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230913070702.12707-1-quic_bibekkum@quicinc.com
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-3-miquel.raynal@bootlin.com
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Fixes: 88ffef1b65 ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-2-miquel.raynal@bootlin.com
A pm_runtime_disable was left in when the driver was ported to use
devm_pm_runtime_enable, remove it.
Fixes: ef75e76716 ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230922090829.1467594-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DT property no-unaligned-direct-access is set, map->phys is set
to NO_XIP. With this property set, the flash should not be exposed
directly to MTD users, since it cannot be mapped.
map_ram() exposes the flash direct access unconditionally which leads to
access errors (when the bus width does not match the RAM width).
Therefore do not set point and unpoint when NO_XIP is set.
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230919113320.16953-1-shivamurthy.shastri@linutronix.de
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct sunxi_nand_chip.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Manuel Dipolt <mdipolt@robart.cc>
Cc: linux-mtd@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201300.never.057-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct rnand_chip.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201254.never.511-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct meson_nfc_nand_chip.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Liang Yang <liang.yang@amlogic.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201249.never.509-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct marvell_nand_chip.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201243.never.235-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ingenic_nfc.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201234.never.868-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct denali_chip.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201227.never.483-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct atmel_nand.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: linux-mtd@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201219.never.352-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfi_private.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201206.never.107-kees@kernel.org
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct lpddr_private.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230915201159.never.112-kees@kernel.org
Due to the presence of the fastboot micro cable in the CI farm,
it causes the hardware to remain in gadget mode instead of host mode.
So it doesn't find the network, which results in failure to mount root
fs via NFS.
Add an overlay dtso file that sets the dr_mode to host, allowing the
USB controllers to work in host mode. With commit 15d16d6dad
("kbuild: Add generic rule to apply fdtoverlay"), overlay target can
be used to simplify the build of DTB overlays. It uses fdtoverlay to
merge base device tree with the overlay dtso. apq8016-sbc-usb-host.dtb
file can be used by drm-ci, mesa-ci.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20230911161518.650726-1-vignesh.raman@collabora.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The following error message is reported when running the example in document.
# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa
Failed to set timerlat period
Could not apply config
The unit of the period is microsecond, '1ms' cannot be accepted.
usage: [rtla] timerlat hist [-h] [-q] [-d s] [-D] [-n] [-a us] [-p us] [-i us] [-T us] [-s us] ...
...
-p/--period us: timerlat period in us
...
Also fix another minor missleading comment.
Link: https://lore.kernel.org/lkml/20230919133028.697144-1-xiexiuqi@huaweicloud.com
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
If no CPU list is passed, timerlat in user-space will dispatch
one thread per sysconf(_SC_NPROCESSORS_CONF). However, not all
CPU might be available, for instance, if HT is disabled.
Currently, rtla timerlat is stopping the session if an user-space
thread cannot set affinity to a CPU, or if a running user-space
thread is killed. However, this is too restrictive.
So, reduce the error to a debug message, and rtla timerlat run as
long as there is at least one user-space thread alive.
Link: https://lore.kernel.org/lkml/59cf2c882900ab7de91c6ee33b382ac7fa6b4ed0.1694781909.git.bristot@kernel.org
Fixes: cdca4f4e5e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
The code in fs_param_is_fd() expects param->dirfd to be set to the fd
that was used to set param->file to initialize result->uint_32. So make
sure it's set so users like autofs using FSCONFIG_SET_FD with the new
mount api can rely on this to be set to the correct value.
Link: https://lore.kernel.org/lkml/20230922-vorbringen-spaghetti-946729122076@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
There were a number of updates to protocol version 4, take account of
that when setting the super block info sub version field.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-9-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert the autofs filesystem to use the mount API.
The conversion patch was originally written by David Howells.
I have taken that patch and broken it into several patches in an effort
to make the change easier to review.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-8-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
During direct reads and writes, the caller is holding the inode glock in
deferred mode, which doesn't allow metadata updates. However, a previous
change caused callers to update the inode modification time before carrying out
direct writes, which caused the inode glock to be converted to exclusive mode
for the timestamp update, only to be immediately converted back to deferred
mode for the direct write. This locks out other direct readers and writers
and wreaks havoc on performance.
Fix that by reverting to not updating the inode modification time for direct
writes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Those helpers don't add any clarity and are easy to use wrong. Spell
them out to make more obvious what's happening.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Corrected a typo in the blk-mq.rst documentation where 'places' was
incorrectly used instead of 'place'.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20230902164121.2653109-1-visitorckw@gmail.com>
arch/arm64/kernel/efi-entry.S has been moved to
drivers/firmware/efi/libstub/arm64-entry.S by commit
v6.1-rc4-6-g4ef806096bdb and to
drivers/firmware/efi/libstub/arm64.c by commit
v6.2-rc3-6-g617861703830
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20230904113214.4147021-1-mikko.rapeli@linaro.org>
from uncategorized list
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20230913105519.675183-1-costa.shul@redhat.com>
Remove the repeated word "the" in comments.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Actually, it should be /sys/devices/
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <ZQz1NUATBMOb3RT+@fedora>
In order to use run_kselftest.sh the list of tests must be emitted to
populate kselftest-list.txt.
The powerpc Makefile is written to use EMIT_TESTS. But support for
EMIT_TESTS was dropped in commit d4e59a536f ("selftests: Use runner.sh
for emit targets"). Although prior to that commit a548de0fe8
("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had
already broken run_kselftest.sh for powerpc due to the executable check
using the wrong path.
It can be fixed by replacing the EMIT_TESTS definitions with actual
emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh
able to run powerpc tests:
$ cd linux
$ export ARCH=powerpc
$ export CROSS_COMPILE=powerpc64le-linux-gnu-
$ make headers
$ make -j -C tools/testing/selftests install
$ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt
182
Fixes: d4e59a536f ("selftests: Use runner.sh for emit targets")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au
The changes to copy_thread() made in commit eed7c420aa ("powerpc:
copy_thread differentiate kthreads and user mode threads") inadvertently
broke arch_stack_walk_reliable() because it has knowledge of the stack
layout.
Fix it by changing the condition to match the new logic in
copy_thread(). The changes make the comments about the stack layout
incorrect, rather than rephrasing them just refer the reader to
copy_thread().
Also the comment about the stack backchain is no longer true, since
commit edbd0387f3 ("powerpc: copy_thread add a back chain to the
switch stack frame"), so remove that as well.
Fixes: eed7c420aa ("powerpc: copy_thread differentiate kthreads and user mode threads")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921232441.1181843-1-mpe@ellerman.id.au
`strncpy` is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.
We know `txselect_list` is expected to be NUL-terminated based on its
use in `param_get_string()`:
| int param_get_string(char *buffer, const struct kernel_param *kp)
| {
| const struct kparam_string *kps = kp->str;
| return scnprintf(buffer, PAGE_SIZE, "%s\n", kps->string);
| }
Note that `txselect_list` is assigned to `kp_txselect`'s string field:
| static struct kparam_string kp_txselect = {
| .string = txselect_list,
| .maxlen = MAX_ATTEN_LEN
| };
Wherein it is then assigned the set and get methods:
| module_param_call(txselect, setup_txselect, param_get_string,
| &kp_txselect, S_IWUSR | S_IRUGO);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230921-strncpy-drivers-infiniband-hw-qib-qib_iba7322-c-v1-1-373727763f5b@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We see that `buf` is expected to be NUL-terminated based on it's use
within a trace event wherein `is_misc_err_name` and `is_various_name`
map to `is_name` through `is_table`:
| TRACE_EVENT(hfi1_interrupt,
| TP_PROTO(struct hfi1_devdata *dd, const struct is_table *is_entry,
| int src),
| TP_ARGS(dd, is_entry, src),
| TP_STRUCT__entry(DD_DEV_ENTRY(dd)
| __array(char, buf, 64)
| __field(int, src)
| ),
| TP_fast_assign(DD_DEV_ASSIGN(dd);
| is_entry->is_name(__entry->buf, 64,
| src - is_entry->start);
| __entry->src = src;
| ),
| TP_printk("[%s] source: %s [%d]", __get_str(dev), __entry->buf,
| __entry->src)
| );
Considering the above, a suitable replacement is `strscpy_pad` due to
the fact that it guarantees NUL-termination on the destination buffer
while maintaining the NUL-padding behavior that strncpy provides.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230921-strncpy-drivers-infiniband-hw-hfi1-chip-c-v1-1-37afcf4964d9@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
__arm_smmu_tlb_inv_range+0x118/0x254
arm_smmu_tlb_inv_range_asid+0x6c/0x130
arm_smmu_mm_invalidate_range+0xa0/0xa4
__mmu_notifier_invalidate_range_end+0x88/0x120
unmap_vmas+0x194/0x1e0
unmap_region+0xb4/0x144
do_mas_align_munmap+0x290/0x490
do_mas_munmap+0xbc/0x124
__vm_munmap+0xa8/0x19c
__arm64_sys_munmap+0x28/0x50
invoke_syscall+0x78/0x11c
el0_svc_common.constprop.0+0x58/0x1c0
do_el0_svc+0x34/0x60
el0_svc+0x2c/0xd4
el0t_64_sync_handler+0x114/0x140
el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------
Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed
to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains.
The commit 06ff87bae8 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called
typically next to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_arch_invalidate_secondary_tlbs {
arm_smmu_mm_arch_invalidate_secondary_tlbs {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230920052257.8615-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
`info.type` is expected to be NUL-terminated judging by its use in
`i2c_new_client_device()` wherein it is used to populate `client->name`:
| strscpy(client->name, info->type, sizeof(client->name));
NUL-padding is not required and even if it was, `client` is already
zero-initialized.
Considering the two points from above, a suitable replacement is
`strscpy` [2] due to the fact that it guarantees NUL-termination on the
destination buffer without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
We expect name to be NUL-terminated based on its numerous uses with
functions that expect NUL-terminated strings.
For example in i2c-core-base.c +1533:
| dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
NUL-padding is not required as `adap` is already zero-alloacted with:
| adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
With the above in mind, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Kernels older than v5.19 do not support PerfMonV2 and the PMI handler
does not clear the overflow bits of the PerfCntrGlobalStatus register.
Because of this, loading a recent kernel using kexec from an older
kernel can result in inconsistent register states on Zen 4 systems.
The PMI handler of the new kernel gets confused and shows a warning when
an overflow occurs because some of the overflow bits are set even if the
corresponding counters are inactive. These are remnants from overflows
that were handled by the older kernel.
During CPU hotplug, the PerfCntrGlobalCtl and PerfCntrGlobalStatus
registers should always be cleared for PerfMonV2-capable processors.
However, a condition used for NB event constaints applicable only to
older processors currently prevents this from happening. Move the reset
sequence to an appropriate place and also clear the LBR Freeze bit.
Fixes: 21d59e3e2c ("perf/x86/amd/core: Detect PerfMonV2 support")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/882a87511af40792ba69bb0e9026f19a2e71e8a3.1694696888.git.sandipan.das@amd.com
The error paths for xiic_reinit() return negative values on failure
and 0 on success - this error message therefore is triggered on
_success_ rather than failure. Correct the condition so it's only
shown on failure as intended.
Fixes: 8fa9c93880 ("i2c: xiic: return value of xiic_reinit")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Advertise our coding style by following it :)
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
debugfs can handle error pointers in subsequent calls. So, remove the
error checks as suggested by kerneldoc of this function.
Reported-by: Minjie Du <duminjie@vivo.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20230713101829.15548-1-duminjie@vivo.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With some new registers, SCL can be calculated to be closer to the
desired rate. Apply the new formula for R-Car Gen3 device types.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Initially, we only needed a reset controller to make sure RXDMA works at
least once per transfer. Meanwhile, documentation has been updated. It
now says that a reset has to be performed prior every transaction, even
if it is non-DMA. So, make the reset controller a requirement instead of
being optional. And bail out if resetting fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
in_atomic_preempt_off() already gets called in schedule_debug() once,
which is the only caller of __schedule_bug().
Skip the second call within __schedule_bug(), it should always be true
at this point.
[ mingo: Clarified the changelog. ]
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230825023501.1848-1-liming.wu@jaguarmicro.com
The driver uses a naming convention where functions for struct drm_*_funcs
callbacks are named ssd130x_$object_$operation, while the callbacks for
struct drm_*_helper_funcs are named ssd130x_$object_helper_$operation.
The idea is that this helper_ prefix in the function names denote that are
for struct drm_*_helper_funcs callbacks. This convention was copied from
other drivers when ssd130x was written, but Maxime pointed out that is the
exception rather than the norm.
So let's get rid of the _helper prefixes from the function handlers names.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914195138.1518065-1-javierm@redhat.com
I2C core ensures in i2c_smbus_xfer() that the I2C bus lock is held when
calling the smbus_xfer callback. That's i801_access() in our case.
I think it's safe in general to assume that the I2C bus lock is held
when the smbus_xfer callback is called.
Therefore I see no need to define an own mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
.discard.retpoline_safe sections do not have the SHF_ALLOC flag. These
sections referencing text sections' STT_SECTION symbols with PC-relative
relocations like R_386_PC32 [0] is conceptually not suitable. Newer
LLD will report warnings for REL relocations even for relocatable links [1]:
ld.lld: warning: vmlinux.a(drivers/i2c/busses/i2c-i801.o):(.discard.retpoline_safe+0x120): has non-ABS relocation R_386_PC32 against symbol ''
Switch to absolute relocations instead, which indicate link-time
addresses. In a relocatable link, these addresses are also output
section offsets, used by checks in tools/objtool/check.c. When linking
vmlinux, these .discard.* sections will be discarded, therefore it is
not a problem that R_X86_64_32 cannot represent a kernel address.
Alternatively, we could set the SHF_ALLOC flag for .discard.* sections,
but I think non-SHF_ALLOC for sections to be discarded makes more sense.
Note: if we decide to never support REL architectures (e.g. arm, i386),
we can utilize R_*_NONE relocations (.reloc ., BFD_RELOC_NONE, sym),
making .discard.* sections zero-sized. That said, the section content
waste is 4 bytes per entry, much smaller than sizeof(Elf{32,64}_Rel).
[0] commit 1c0c1faf56 ("objtool: Use relative pointers for annotations")
[1] https://github.com/ClangBuiltLinux/linux/issues/1937
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20230920001728.1439947-1-maskray@google.com
When entering the suspend callback, at first we should ensure that
transfers are finished and I2C core can't start further transfers.
Use i2c_mark_adapter_suspended() for this purpose, and complement it
with a call to i2c_mark_adapter_resumed() in the resume path.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When SVM is disabled by BIOS, one cannot use KVM but the
SVM feature is still shown in the output of /proc/cpuinfo.
On Intel machines, VMX is cleared by init_ia32_feat_ctl(),
so do the same on AMD and Hygon processors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230921114940.957141-1-pbonzini@redhat.com