gpio_sim_make_line_names() returns NULL or ERR_PTR() so we must not use
__free(kfree) on the returned address. Split this function into two, one
that determines the size of the "gpio-line-names" array to allocate and
one that actually sets the names at correct offsets. The allocation and
assignment of the managed pointer happens in between.
Fixes: 3faf89f27a ("gpio: sim: simplify code with cleanup helpers")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Closes: https://lore.kernel.org/all/07c32bf1-6c1a-49d9-b97d-f0ae4a2b42ab@p183/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When the CS35L41 amp is requested to mute using the ACPI
notification mechanism, userspace is not notified that the amp
is muted. To allow userspace to know about the mute, add an
ALSA control which tracks the forced mute override.
This control does not track the overall mute state of the amp,
since the amp is only unmuted during playback anyway, instead
it tracks the mute override request from the ACPI notification.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some laptops require a hardware based mute system, where when a hotkey
is pressed, it forces the amp to be muted.
For CS35L41, when the hotkey is pressed, an acpi notification is sent
to the CS35L41 Device Node. The driver needs to handle this notification
and call a _DSM function to retrieve the mute state.
Since the amp is only muted during playback, the driver will only mute
or unmute if playback is occurring, otherwise it will save the mute
state for when playback starts.
This uses the ACPI Notification mechanism, where a handler has been
registered in the component master, which notifies each amp through
the component binding.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For systems which have support for ACPI notifications, add a mechanism to
register a handler for ACPI notifications and then call the acpi_notify
api on the bound components.
Registering a handler in the Realtek HDA driver, allows a single handler to
be registered, which then calls into all the components, rather than
attempting to register the same handler multiple times, once for each
component.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some systems support a notification from ACPI, which can be used
for different things.
Only one handler can be registered for the acpi notification, but all
amps need to receive that notification, we can register a single handler
inside the component master, so that it can then notify through the
component framework.
This is required to support mute notifications from ACPI.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the protocol parameter validation into a seperate function.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-7-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Seperate out parts of parse_options() that will match better the
individual option processing used in the mount API to further simplify
the upcoming conversion.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-6-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The enum of options is only reformated in the patch to convert autofs
to use the mount API so do that now to simplify the conversion patch.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-5-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the allocation and initialisation of the super block
info struct to its own function.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-4-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Factor out the fd mount option handling.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-3-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Refactor autofs_prepare_pipe() by seperating out a check function
to be used later.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Message-Id: <20230922041215.13675-2-raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The following FW elements are recognized, and then the valid entries
in them are loaded into SW struct case by case.
* TX power by rate
* TX power limit 2 GHz
* TX power limit 5 GHz
* TX power limit 6 GHz
* TX power limit RU 2 GHz
* TX power limit RU 5 GHz
* TX power limit RU 6 GHz
* TX shape limit
* TX shape limit RU
One single firmware file can contain multiples of each of the above FW
elements. Each of them is configured with a target RFE (RF front end)
type. We choose one of the multiples to load based on RFE type. If there
are multiples of the same FW elements with the same target RFE type. The
last one will be applied.
We don't want to have many loading variants for above FW elements. Even if
between different chips or between different generations, we would like to
maintain only one single set of loadings. So, the loadings are designed to
consider compatibility. The main concepts are listed below.
* The driver structures, which are used to cast binary entry from FW,
cannot insert new members in the middle. If there are something new,
they should always be appended at the tail.
* Each binary entry from FW uses a dictionary way containing a key set
and a data. The keys in the key set indicate where to put the data.
* If size of driver struct and size of binary entry do not match when
loading, it means the number of keys in the key set are different.
Then, we deal with compatibility. No matter which one has more keys,
we take/use zero on those mismatched keys.
If driver struct is bigger (backward compatibility):
e.g. SW uses two keys, but FW is built with one key.
Then, put the data of FW(keyX) into SW[keyX][0].
If binary entry is bigger (forward compatibility):
e.g. FW is built with two keys, but SW uses one key.
Then, only take the data of FW(keyX, keyY = 0) into SW[keyX]
Besides, chip info setup flow is tweaked a bit for the following.
* Before loading FW elements, we need to determine chip RFE via efuse.
* Setting up RFE parameters depends on loading FW elements ahead.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-8-pkshih@realtek.com
The following are introduced for Wi-Fi 7 chips.
1. take BW/OFDMA into account on TX power by rate
2. increase TX power offset types up to EHT
3. split TX shape into tx_shape_lmt and tx_shape_lmt_ru
If functions which are only for AX, they always access TX power by rate
with BW/OFDMA = 0/0, and they don't access tx_shape's lmt_ru section.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-7-pkshih@realtek.com
Table of TX power by rate only needs to be loaded once. But, we originally
loaded it every time we start core. Now, we load it one time along as RFE
(RF Front End) parameters are determined.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-6-pkshih@realtek.com
Originally, these helpers were implemented by macros. We rewrite them
by normal functions. In the new function to seek raw TX power by rate,
we access the array according to rate section and discard the original
pointer arithmetic.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-5-pkshih@realtek.com
For next-generation chips, TX power by rate table comes from RFE (RF
front end) parameter. It can be different according to RFE type. So,
we indicate TX power by rate table inside RFE parameter ahead. For
current chips, even with different RFE types, a chip is configured
with a single TX power by rate table. So, this commit doesn't really
affect these currently supported chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-4-pkshih@realtek.com
For next-generation chips, TX shape table comes from RFE (RF front end)
parameter. It can be different according to RFE type. So, we indicate
TX shape table inside RFE parameter ahead. For current chips, even with
different RFE types, a chip is configured with a single TX shape table.
So, this commit doesn't really affect these currently supported chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-3-pkshih@realtek.com
The subband index is a hardware value of relationship between primary
channel and bandwidth, and it is used by setting channel/bandwidth to
specify the primary channel.
Because this index is only needed when bandwidth >= 20 MHz, adjust
order of enumerator bandwidth to access offsets array easier. To prevent
misuse RTW89_CHANNEL_WIDTH_NUM as size, change it to
RTW89_CHANNEL_WIDTH_ORDINARY_NUM that will be the size of array. The
enumerator values of bandwidth (before ordinary number) will be also
used by upcoming TX power table built in firmware file, so add a comment
to remind keeping the order.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920074322.42898-2-pkshih@realtek.com
I've seen what appears to be livelocks in the stress_inorder_work()
function, and looking at the code it is clear we can have a case
where we continually retry acquiring the locks and never check to
see if we have passed the specified timeout.
This patch reworks that function so we always check the timeout
before iterating through the loop again.
I believe others may have hit this previously here:
https://lore.kernel.org/lkml/895ef450-4fb3-5d29-a6ad-790657106a5a@intel.com/
Reported-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-4-jstultz@google.com
In some cases running with the test-ww_mutex code, I was seeing
odd behavior where sometimes it seemed flush_workqueue was
returning before all the work threads were finished.
Often this would cause strange crashes as the mutexes would be
freed while they were being used.
Looking at the code, there is a lifetime problem as the
controlling thread that spawns the work allocates the
"struct stress" structures that are passed to the workqueue
threads. Then when the workqueue threads are finished,
they free the stress struct that was passed to them.
Unfortunately the workqueue work_struct node is in the stress
struct. Which means the work_struct is freed before the work
thread returns and while flush_workqueue is waiting.
It seems like a better idea to have the controlling thread
both allocate and free the stress structures, so that we can
be sure we don't corrupt the workqueue by freeing the structure
prematurely.
So this patch reworks the test to do so, and with this change
I no longer see the early flush_workqueue returns.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-3-jstultz@google.com
Booting w/ qemu without kvm, and with 64 cpus, I noticed we'd
sometimes hung task watchdog splats in get_random_u32_below()
when using the test-ww_mutex stress test.
While entropy exhaustion is no longer an issue, the RNG may be
slower early in boot. The test-ww_mutex code will spawn off
128 threads (2x cpus) and each thread will call
get_random_u32_below() a number of times to generate a random
order of the 16 locks.
This intense use takes time and without kvm, qemu can be slow
enough that we trip the hung task watchdogs.
For this test, we don't need true randomness, just mixed up
orders for testing ww_mutex lock acquisitions, so it changes
the logic to use the prng instead, which takes less time
and avoids the watchdgos.
Feedback would be appreciated!
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-2-jstultz@google.com
Introduce a few more (PCIE and generic interface related)
cleanups which becomes reasonable after the previous patch.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-2-dmantipov@yandex.ru
Since 'mwifiex_write_reg()' just issues void 'iowrite32()',
convert the former to 'void' and simplify all related users
(with the only exception of 'read_poll_timeout()' which
explicitly requires a non-void function argument).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-1-dmantipov@yandex.ru
The list_head counterpart of list_for_each_entry_reverse() was missing,
add it to complete the list handling APIs in <linux/list.h>.
[ This new API is also relied on by a WIP scheduler patch, so this
variant is not a theoretical possibility only. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Header cleanups in the fast-headers tree highlighted that we have an
unused assembly implementation for __sw_hweight64():
WARNING: modpost: EXPORT symbol "__sw_hweight64" [vmlinux] version ...
__arch_hweight64() on x86-32 is defined in the
arch/x86/include/asm/arch_hweight.h header as an inline, using
__arch_hweight32():
#ifdef CONFIG_X86_32
static inline unsigned long __arch_hweight64(__u64 w)
{
return __arch_hweight32((u32)w) +
__arch_hweight32((u32)(w >> 32));
}
*But* there's also a __sw_hweight64() assembly implementation:
arch/x86/lib/hweight.S
SYM_FUNC_START(__sw_hweight64)
#ifdef CONFIG_X86_64
...
#else /* CONFIG_X86_32 */
/* We're getting an u64 arg in (%eax,%edx): unsigned long hweight64(__u64 w) */
pushl %ecx
call __sw_hweight32
movl %eax, %ecx # stash away result
movl %edx, %eax # second part of input
call __sw_hweight32
addl %ecx, %eax # result
popl %ecx
ret
#endif
But this __sw_hweight64 assembly implementation is unused - and it's
essentially doing the same thing that the inline wrapper does.
Remove the assembly version and add a comment about it.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
<linux/mm.h> relies on these definitions being included first,
which is true currently due to historic header spaghetti,
but in the future <asm/processor.h> will not guaranteed to be
included by the MM code.
Move these definitions over into a suitable MM header.
This is a preparatory patch for x86 header dependency simplifications
and reductions.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Add the node to use the ARM SMC watchdog support. It will
use a dedicated smc-id to configure and kick the watchdog.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes: 2daa67588f ("mt76x0: unify lna_gain parsing")
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
Petr Machata says:
====================
mlxsw: Improve blocks selection for IPv6 multicast forwarding
Amit Cohen writes:
The driver configures two ACL regions during initialization, these regions
are used for IPv4 and IPv6 multicast forwarding. Entries residing in these
two regions match on the {SIP, DIP, VRID} key elements.
Currently for IPv6 region, 9 key blocks are used. This can be improved by
reducing the amount key blocks needed for the IPv6 region to 8. It is
possible to use key blocks that mix subsets of the VRID element with
subsets of the DIP element.
To make this happen, we have to take in account the algorithm that chooses
which key blocks will be used. It is lazy and not the optimal one as it is
a complex task. It searches the block that contains the most elements that
are required, chooses it, removes the elements that appear in the chosen
block and starts again searching the block that contains the most elements.
To optimize the nubmber of the blocks for IPv6 multicast forwarding, handle
the following:
1. Add support for key blocks that mix subsets of the VRID element with
subsets of the DIP element.
2. Prevent the algorithm from chosing another blocks for VRID.
Currently, we have the block 'ipv4_4' which contains 2 sub-elements of
VRID. With the existing algorithm, this block might be chosen, then 8
blocks must be chosen for SIP and DIP and we will get 9 blocks to match on
{SIP, DIP, VRID}. Therefore, replace this block with a new block 'ipv4_5'
that contains 1 element for VRID, this will not be chosen for IPv6 as VRID
element will be broken to several sub-elements. In this way we can get 8
blocks for IPv6 multicast forwarding.
This improvement was tested and indeed 8 blocks are used instead of 9.
v2:
- Resending without changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Two ACL regions that are configured by the driver during initialization are
the ones used for IPv4 and IPv6 multicast forwarding. Entries residing
in these two regions match on the {SIP, DIP, VRID} key elements.
Currently for IPv6 region, 9 key blocks are used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 4 for DIP - 'ipv4_0', 'ipv6_{0,1,2/2b}'
* 1 for VRID - 'ipv4_4b'
This can be improved by reducing the amount key blocks needed for
the IPv6 region to 8. It is possible to use key blocks that mix subsets of
the VRID element with subsets of the DIP element.
The following key blocks can be used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 1 for subset of DIP - 'ipv4_0'
* 3 for the rest of DIP and subsets of VRID - 'ipv6_{0,1,2/2b}'
To make this happen, add VRID sub-elements as part of existing keys -
'ipv6_{0,1,2/2b}'. Note that one of the sub-elements is called
VRID_ROUTER_MSB and does not contain bit numbers like the rest, as for
Spectrum < 4 this element represents bits 8-10 and for Spectrum-4 it
represents bits 8-11.
Breaking VRID into 3 sub-elements makes the driver use one less block in
IPv6 region for multicast forwarding. The sub-elements can be filled in
blocks that are used for destination IP.
The algorithm in the driver that chooses which key blocks will be used is
lazy and not the optimal one. It searches the block that contains the most
elements that are required, chooses it, removes the elements that appear
in the chosen block and starts again searching the block that contains the
most elements.
When key block 'ipv4_4' is defined, the algorithm might choose it, as it
contains 2 sub-elements of VRID, then 8 blocks must be chosen for SIP and
DIP and we get 9 blocks to match on {SIP, DIP, VRID}. That is why we had to
remove key block 'ipv4_4' in a previous patch and use key block that
contains one field for VRID.
This improvement was tested and indeed 8 blocks are used instead of 9.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch replaced the key block 'ipv4_4' with 'ipv4_5'. The
corresponding block for Spectrum-4 is 'ipv4_4b'. To be consistent, replace
key block 'ipv4_4b' with 'ipv4_5b'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently virtual router ID element is broken to two sub-elements -
'VIRT_ROUTER_LSB' and 'VIRT_ROUTER_MSB'. It was broken as this field is
broken in 'ipv4_4' flex key which is used for IPv4 in Spectrum < 4.
For Spectrum-4, we use 'ipv4_4b' flex key which contains one field for
virtual router, this key is not supported in older ASICs.
Add 'ipv4_5' flex key which is supported in all ASICs and contains one
field for virtual router. Then there is no reason to use 'VIRT_ROUTER_LSB'
and 'VIRT_ROUTER_MSB', remove them and add one element 'VIRT_ROUTER' for
this field.
The motivation is to get rid of 'ipv4_4' flex key, as it might be chosen
for IPv6 multicast forwarding region. This will not allow the improvement
in a following patch. See more details in the cover letter and in a
following patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Kconfig help text for baycom drivers suggests that more information
on the hardware can be found at <https://www.baycom.de>. The website now
includes no information on their ham radio products other than a mention
that they were once produced by the company, saying:
"The amateur radio equipment is now no longer part and business of BayCom GmbH"
As there is no information relavent to the baycom driver on the site,
remove the link.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the configuration node for SD-card support on STM32MP257F-EV1 board.
For the moment it uses a fixed regulator for vmmc, and vqmmc is skipped
until regulator driver is available.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the pins used for SD-card on STM32MP257F-EV1 board.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The SDMMC1 peripheral is used for SD-cards (default on ST boards), or
eMMC cards. For the moment it uses the fixed clock ck_flexgen_51, until
clock driver is available.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
amdgpu:
- MST fix
- Vbios part number reporting fix
- Fix a possible memory leak in an error case in the RAS code
- Fix low resolution modes on eDP
amdkfd:
- Fix GPU address for user queue wptr when GART is not at 0
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZQtxigAKCRC93/aFa7yZ
2J1cAP4pAh6UNBxhVGm1YqDesK6q8K6vRznlapI0McReGsToHAD/bdsbLbrG0MCK
/l/rGEeM9YjXa2IQrmMOZ1zlVDEZfgM=
=Tr01
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.6-2023-09-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.6-2023-09-20:
amdgpu:
- MST fix
- Vbios part number reporting fix
- Fix a possible memory leak in an error case in the RAS code
- Fix low resolution modes on eDP
amdkfd:
- Fix GPU address for user queue wptr when GART is not at 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920222915.7789-1-alexander.deucher@amd.com
Trusted boot support requires the platform event log passed up
from the bootloader. In U-Boot, this can now be accomplished with
a reserved memory region, so add a region for this purpose to the
Bonnell BMC devicetree.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230616142610.356623-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a per target protocol field so target code can determine correct
protocol specific actions as well as identify the correct channel group
target list.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-12-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The target discovery buffer that the VIOS populates with targets is
currently a host adapter field. To facilitate the discovery of NVMe targets
as well as SCSI another discovery buffer is required. Move the discovery
buffer out of the host struct and into the ibmvfc_channels struct so that
each channels instance for a given protocol has its own discovery buffer.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-11-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are cases in the generic code where protocol specific configuration
or actions may need to be taken. Add a protocol field to struct
ibmvfc_channels and initial IBMVFC_PROTO_[SCSI/NVME] definitions.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-10-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the coming of NVMeoF support the driver will need to also allocate
channels for NVMe. Implement generic channel allocation wrappers that can
be used for both SCSI and NVMeoF protocol setup.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-9-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add fields for desired and max number of queues to ibmvfc_channels. With
support for NVMeoF protocol coming these sorts of values should be tracked
in the protocol specific channel struct instead of the overarching host
adapter.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-8-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is nothing scsi specific about the ibmvfc_scsi_channels struct. It is
meant to encapsulate a set of channels regardless of protocol.
Remove _scsi from the struct name to reflect this genric nature.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-7-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are currently 9 binary flag fields in the ibmvfc host
structure. Converting each of these to a single bitfield reduces the foot
print of the structure by 32 bytes.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-6-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>