MSM8976 downstream dts define reloc region which is used by pil-tz
to load both wcnss and lpass, on mainline however we might not be
able to do it and we need separate regions(also validating dts might get
problematic if we had to put memory-region(rproc node) per device).
Luckily it seems size and entry points in firmware headers appears
to be static across multiple devices including Sony Loire platform
and Xiaomi Redmi Note 3 Pro this should let us fit in first ~17MB
Split lpass region(reloc on downstream) into two separate regions.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-7-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This change is to adjust TCLK-POST timing so DSI signaling can
meet CTS specification.
For clock lane, the TCLK-POST timing may be changed from
133.44 ns to 178.72 ns, which is greater than (60 ns+52*UI)
and is conformed to the CTS standard.
The computed UI is around 1.47 ns.
v2: remove the change of HS-TRAIL.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: William Tseng <william.tseng@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914095137.4132029-1-william.tseng@intel.com
When external bridges are attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR,
the panel bridge may also get the same flag, but in the .attach()
callback for the panel bridge a device link is added only when this
flag is not present; To make things worse, the .detach() callback
tries to delete the device link unconditionally and without checking
if it was created in the first place, crashing the kernel with a NULL
pointer kernel panic upon calling panel_bridge_detach().
Fix that by moving the device_link_add() call before checking if the
DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is present.
Fixes: 199cf07ebd ("drm/bridge: panel: Add a device link between drm device and panel device")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920082727.57729-1-angelogioacchino.delregno@collabora.com
Add an ICE node to sa8775p SoC description and enable it by adding a
phandle to the UFS node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913153529.32777-2-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems. The fix for the i.MX driver is fairly urgent, it's
fixing a data corruption issue when bits per word isn't 8. There's also
one fix which was queued but not sent for v6.4 due to being minor and
arriving at the end of the release.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUK64oACgkQJNaLcl1U
h9AbJgf9F4aRSuHTYThemL6PRHpW2b0QCRFe4rbeho+H3JPmgQBPlrnriwbnL2kL
oTcPQJgrP7wPQxoN4MSJ4JRh8Rkj7v5I9KOxe+TeIsxGeYpDnyLUDnhOAP6f2FZZ
nlJ0fUKFRzobqAd2n9Wb15hF08rf/fFSI0KSjyN2EHCj02OLSu+IJQReXHvtbuZ3
TX3gW7FAgFqV/YzR3A2IBLteMhJPqQAY5U6x3DlIAVhgafww9nj4OyVjP5HftRSv
zArx+mRoeaqqsUd/oodyPpMSuaspMyathdWvPfpNkGiRJgCVZ2FB3pfZbyK7tTk2
hAxGPpfe8WRMD4JpifSJggm4HR46Ng==
=WxRo
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems.
The fix for the i.MX driver is fairly urgent, it's fixing a data
corruption issue when bits per word isn't 8.
There's also one fix which was queued but not sent for v6.4 due to
being minor and arriving at the end of the release"
* tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: Take in account bits per word instead of assuming 8-bits
spi: intel-pci: Add support for Granite Rapids SPI serial flash
spi: stm32: add a delay before SPI disable
spi: nxp-fspi: reset the FLSHxCR1 registers
spi: zynqmp-gqspi: fix clock imbalance on probe failure
The modem firmware size is typically highly device-specific.
The current size of the mpss_mem region in msm8916.dtsi (0x2b00000)
only works for some APQ8016 devices without full-featured modem,
such as the DragonBoard 410c.
The full modem firmware is typically about twice as large (~45 MiB
-> ~90 MiB) but also varies by a few MiB from device to device. Since
these devices are quite memory-constrained nowadays it's important to
minimize the unnecessary memory reservations.
Make it clear that each board needs to specify the necessary mpss_mem
size by replacing the DB410c-specific size in msm8916.dtsi with a
simple comment. &mpss_mem is disabled by default so it's fine to leave
some properties up to the boards if they want to enable it.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-8-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now that we no longer have fixed addresses for the firmware memory
regions, disable them by default and only enable them together with
the actual user in the board DT.
This frees up unnecessary reserved memory for boards that do not use
some of the remoteprocs and allows moving selected device-specific
properties (such as firmware size) to the board-specific DT part in
the next step.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-7-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the example of MSM8916 and reserve the firmware memory regions
dynamically to allow boards to define only the device-specific parts.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-6-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At a first glance the MBA memory region on MSM8916 looks intentionally
placed at the fixed address 0x8ea00000. This is what the ELF headers of
the firmware specify as base address, and the typical Qualcomm-specific
bits suggest the binary is not relocatable.
However, on a closer look this is pointless: Unlike other firmware
images the hardware expects to have the raw ELF image loaded to the MBA
region, including the ELF header (without parsing it at all). This
means that we actually just load the ELF header (not the code!) at
0x8ea00000. The real LOAD segments follow at arbitrary aligned
addresses depending on the structure of the ELF binary.
In practice it looks like we can use an arbitrary 1 MiB-aligned region
for MBA. The downstream/vendor kernel just allocates this dynamically
at an arbitrary (aligned) address.
Drop the pointless fixed address and use the new dynamic reserved
memory mechanism to allocate a region close to the others. This reduces
gaps in the memory map and provides Linux with more contiguous memory.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-5-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Most of the reserved firmware memory on MSM8916 can be relocated when
respecting the required alignment. To avoid having to precompute the
reserved memory regions in every board DT, describe the actual
requirements (size, alignment, alloc-ranges) using the dynamic reserved
memory allocation.
This approach has several advantages:
1. We can define "templates" for the reserved memory regions in
msm8916.dtsi and keep only device-specific details in the board DT.
This is useful for the "mpss" region size for example, which varies
from device to device. It is no longer necessary to redefine all
firmware regions to shift their addresses.
2. When some of the functionality (e.g. WCNSS, Modem, Venus) is not
enabled or needed for a device, the reserved memory can stay
disabled, freeing up the unused reservation for Linux.
3. Devices with special requirements for one of the firmware regions
are handled automatically. For example, msm8916-longcheer-l8150
has non-relocatable "wcnss" firmware that must be loaded exactly
at address 0x8b600000. When this is defined as a static region,
the other dynamic allocations automatically adjust to a different
place with suitable alignment.
All in all this approach significantly reduces the boilerplate necessary
to define the different firmware regions, and makes it easier to enable
functionality on the different devices.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-4-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MSM8916/39 do not need signed GPU firmware so it is generally okay to
have it enabled by default. However, currently the GPU does not work
without also enabling MDSS and it's questionable if someone would
really need it without a display in practice.
For consistency let's follow newer SoCs and disable the GPU by default.
Enable it for all existing devices that already have &mdss enabled.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-2-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Venus needs firmware that is usually signed with a device-specific key.
There are also devices that might not need it (especially during
bring-up), so let's follow more recent SoCs and disable it by default.
Enable it explicitly for all current devices except msm8916-mtp. That
one has just UART enabled currently so it cannot really benefit from
Venus.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-1-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUK680ACgkQJNaLcl1U
h9APfwf9EmhIJcm1kfaT4mExcronA/gzPgZQ/8cHyrf4B1AFFBjddISeCq8rKtQR
vJ7hKzKlQ3UEGAn0gNTsd3k1MshKIAI3vjuqpOiMJfEZ48MUMkvS4A6j5fETvUr/
T2TA/uNqr2reaHnPSiJjnVm/dQT2e4gNZv/kClEpTfSsLIqjI3NNR8AJWToHzim+
vbWs3OKmKz/c+Wuppkb+8PIVj6t8IC57t8u+EDOwhKS1494w5XPo2BOXbldhTH4k
2KtisFLRLXr/n2SsR+s+CQ9ODGPajN6RLGMwIwcVes4u1kD4kIDwNRzd/ov8TrSY
iXbfkiVmVEm2b3qRiO3WIYwVzDQ1LA==
=UlNw
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set"
* tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix voltage range selection
Assert that vasprintf() succeeds as the "returned" string is undefined
on failure. Checking the result also eliminates the only warning with
default options in KVM selftests, i.e. is the only thing getting in the
way of compile with -Werror.
lib/test_util.c: In function ‘strdup_printf’:
lib/test_util.c:390:9: error: ignoring return value of ‘vasprintf’
declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
390 | vasprintf(&str, fmt, ap);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Don't bother capturing the return value, allegedly vasprintf() can only
fail due to a memory allocation failure.
Fixes: dfaf20af76 ("KVM: arm64: selftests: Replace str_with_index with strdup_printf")
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230914010636.1391735-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add missing IP discovery info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pp_dpm_*clk nodes also could show the frequencies when a clock is in
'sleep' state. Add documentation related to that.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Seamless boot can technically be supported as far back as DCN1
but to avoid regressions on older hardware, enable it for DCN3 and
later.
If users report using the module parameter that it works on older
ASICs as well, this can be adjusted.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The module parameter can be used to test more easily enabling seamless
boot support on additional ASICs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During jpeg init, CPU writes to frame buffer which can be cached by HDP,
occasionally causing invalid header to be sent to MMSCH. Perform HDP flush
after writing to frame buffer before continuing with jpeg init sequence.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow base driver to dictate whether seamless should be
enabled. No intended functional changes.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
`amdgpu_gmc_get_vbios_allocations` has a special case for how to
bring up yellow carp when amdgpu discovery is turned off. As this ASIC
ships with discovery turned on, it's generally dead code and worse it
causes `adev->mman.keep_stolen_vga_memory` to not be initialized for
yellow carp.
Remove it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.6, keep GFX deep sleep clock reporting style consistent
with that of other clocks. Sample format below.
S: 78Mhz *
0: 600Mhz
1: 800Mhz
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.6, effective clocks are reported by FW which won't exactly
match with DPM level. Report the current clock based on the values
matching closest to the effective clock. Also, when deep sleep is
applied to a clock, report it with a special level "S:" as in sample
clock levels below
S: 19Mhz *
0: 615Mhz
1: 800Mhz
2: 888Mhz
3: 1000Mhz
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When parsing the configs, keep track of card configurations that match
the current system but haven't matched any card, and report those as
test failures as they represent that a card which was expected to be
present on the system is missing. This allows the configuration files to
not only be used to detect missing PCM devices (which is currently
possible) but also that the soundcard hasn't been registered at all.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230919152702.100617-1-nfraprado@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The only feature using the Firmware (FW) shared parameters was the PTP
clock ID. Since this ID is now shared using auxiliary buss - remove the
FW shared parameters from the code.
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PHC clock id used to be moved between PFs using FW admin queue
shared parameters - move the implementation to auxiliary bus.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit ffb6cf19e0.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 50e9ceef1d.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 0269b58586.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit e44df26647.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit d48c339729.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add support for qcom global clock controller bindings for SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230909123431.1725728-4-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The E822 (and other devices based on the same PHY) is having issue while
setting the PHC timer - the PHY timers are drifting from the PHC. After
such a set all PHYs need to be restarted and resynchronised - do it
using auxiliary bus.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
sc7180 has an ADSP remoteproc that exclusively controls the audio
hardware on devices that use Qualcomm firmware.
Add it along with the relevant audio services.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-4-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some devices use tertiary mi2s to connect external audio codec.
Add it near the other two i2s pinctrl definitions so the devices don't
have to duplicate it.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-3-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is a problem in HW in E822-based devices leading to race
condition.
It might happen that, in order:
- PF0 (which owns the PHC) requests few timestamps,
- PF1 requests a timestamp,
- interrupt is being triggered and both PF0 and PF1 threads are woken
up,
- PF0 got one timestamp, still waiting for others so not going to sleep,
- PF1 gets it's timestamp, process it and go to sleep,
- PF1 requests a timestamp again,
- just before PF0 goes to sleep timestamp of PF1 appear,
- PF0 finishes all it's timestamps and go to sleep (PF1 also sleeping).
That leaves PF1 timestamp memory not read, which lead to blocking the
next interrupt from arriving.
Fix it by adding auxiliary devices and only one driver to handle all the
timestamps for all PF's by PHC owner. In the past each PF requested it's
own timestamps and process it from the start till the end which causes
problem described above. Currently each PF requests the timestamps as
before, but the actual reading of the completed timestamps is being done
by the PTP auxiliary driver, which is registered by the PF which owns PHC.
Additionally, the newly introduced auxiliary driver/devices for PTP clock
owner will be used for other features in all products (including E810).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
SM6375 hosts an ADSP, CDSP and modem as remote processors. Create
related bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-6375_rproc-v5-1-a8e9cde56a20@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>