Commit graph

1,233,462 commits

Author SHA1 Message Date
David Francis
5f248462c6 drm/amdgpu: Add EXT_COHERENT memory allocation flags
These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.

On GFX943 these flags cause caches to be avoided on
non-local memory.

On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.

Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88

Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-20 16:24:06 -04:00
Jonathan Kim
d92e55565c drm/amdkfd: fix add queue process context clear without runtime enable
There are cases where HSA runtime is not enabled through the
AMDKFD_IOC_RUNTIME_ENABLE call when adding queues and the MES ADD_QUEUE
API should clear the MES process context instead of SET_SHADER_DEBUGGER.
Such examples are legacy HSA runtime builds that do not support the
current exception handling and running KFD tests.

The only time ADD_QUEUE.skip_process_ctx_clear is required is for
debugger use cases where a debugged process is always runtime enabled
when adding a queue.

Tested-by: Shikai Guo <shikai.guo@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-20 16:23:57 -04:00
Ville Syrjälä
16a9359401 drm/i915: Implement transcoder LRR for TGL+
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).

The panel itself must support VRR for this to work, and
only TGL+ has the double buffred TRANS_VTOTAL.VTOTAL that
we need to make the switch properly. The double buffer
latching happens at the start of transcoders undelayed
vblank. The other thing that we change is
TRANS_VBLANK.VBLANK_END but the hardware entirely ignores
that in DP mode. But I decided to keep writing it anyway
just to avoid more special cases in readout/state check.

v2: Document that TRANS_VBLANK.VBLANK_END is ignored by
    the hardware
v3: Reconcile with VRR fastset
    Adjust update_lrr flag behaviour
    Make sure timings stay within VRR range
v4: Fix up update_m_n vs. update_lrr rebase fail (Manasi)
    Drop DOUBLE_BUFFER_VACTIVE define as it's not needed (Manasi)

TODO: Hook LRR into the automatic DRRS downclocking stuff?

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915103800.14218-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
2023-09-20 22:32:55 +03:00
Ville Syrjälä
26f03ef816 drm/i915: Assert that VRR is off during vblank evasion if necessary
Whenever we change the actual transcoder timings (clock via
seamless M/N, full modeset, (or soon) vtotal via LRR) we
want the timing generator to be in non-VRR during the commit.
Warn if we forgot to turn VRR off prior to vblank evasion.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-12-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:32:22 +03:00
Ville Syrjälä
0ce013a4e8 drm/i915: Update VRR parameters in fastset
We should be able to change any of the VRR parameters
during fastsets as long as we toggle VRR off at the start
and then back on at the end. The transcoder will be running
in non-VRR mode during the transition.

Co-developed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-11-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
2023-09-20 22:31:39 +03:00
Ville Syrjälä
8f782270cc drm/i915: Disable VRR during seamless M/N changes
Make life less confusing by making sure VRR is disabled whenever
we do any drastic changes to the display timings, such as seamless
M/N changes.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:31:21 +03:00
Ville Syrjälä
6a38b36c27 drm/i915: Validate that the timings are within the VRR range
Let's assume there are some crazy displays where the high
end of the VRR range ends up being lower than the refresh
rate as determined by the actual timings. In that case
when we toggle VRR on/off we would step outside the VRR
range when toggling VRR on/off. Let's just make sure that
never happens by not using VRR in such cases. If the user
really wants VRR they should then select the timings to
land within the VRR range.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-9-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:30:55 +03:00
Ville Syrjälä
f0f7ec743d drm/i915: Relocate is_in_vrr_range()
Move is_in_vrr_range() into intel_vrr.c in anticipation of
more users, and rename it accordingly.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:30:08 +03:00
Ville Syrjälä
b4ac591b8e drm/i915: Optimize out redundant M/N updates
Don't perform a seamless M/N update if the values aren't actually
changing. This avoids doing extra shenanigans during vblank evasion
needlessly.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-7-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
2023-09-20 22:29:43 +03:00
Ville Syrjälä
825edc8bc7 drm/i915: Adjust seamless_m_n flag behaviour
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.

I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
2023-09-20 22:29:23 +03:00
Ville Syrjälä
691dec86ac drm/i915: Enable VRR later during fastsets
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.

This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).

This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:28:14 +03:00
Ville Syrjälä
f4b0cece71 drm/i915: Extract intel_crtc_vblank_evade_scanlines()
Pull the vblank evasion scanline calculations into their own helper
to declutter intel_pipe_update_start() a bit.

Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:27:46 +03:00
Ville Syrjälä
09f390d4e2 drm/i915: Change intel_pipe_update_{start,end}() calling convention
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:27:31 +03:00
Ville Syrjälä
f895e3db65 drm/i915: Move psr unlock out from the pipe update critical section
Do the PSR unlock after the vblank evade critcal section is
fully over, not before.

Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20 22:27:08 +03:00
Nícolas F. R. A. Prado
14571ab1ad kselftest: Add new test for detecting unprobed Devicetree devices
Introduce a new kselftest to detect devices that were declared in the
Devicetree, and are expected to be probed by a driver, but weren't.

The test uses two lists: a list of compatibles that can match a
Devicetree device to a driver, and a list of compatibles that should be
ignored. The first is automatically generated by the
dt-extract-compatibles script, and is run as part of building this test.
The list of compatibles to ignore is a hand-crafted list to capture the
few exceptions of compatibles that are expected to match a driver but
not be bound to it.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230828211424.2964562-4-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-20 14:25:10 -05:00
Nícolas F. R. A. Prado
365ba0c7a7 dt: dt-extract-compatibles: Add flag for driver matching compatibles
Add a new flag, '--driver-match', to the dt-extract-compatibles script
that causes it to only print out compatibles that are expected to match
a driver. This output can then be used by tests to detect device probe
failures.

In order to filter the compatibles down to only ones that will match to
a driver, the following is considered:
- A compatible needs to show up in a driver's of_match_table for it to
  be matched to a driver
- Compatibles that are used in both of_match_table and OF_DECLARE type
  macros can't be expected to match to a driver and so are ignored.
  One exception is CLK_OF_DECLARE_DRIVER, since it indicates that a
  driver will also later probe, so compatibles in this macro are not
  ignored.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-3-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-20 14:25:10 -05:00
Nícolas F. R. A. Prado
eb2139fc0d dt: dt-extract-compatibles: Handle cfile arguments in generator function
Move the handling of the cfile arguments to a separate generator
function to avoid redundancy.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-2-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-20 14:25:10 -05:00
Linus Torvalds
42dc814987 Linux media updates for v6.6-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmULM54THG1jaGVoYWJA
 a2VybmVsLm9yZwAKCRAIXz69juThFbQdD/9D0i18wZthZoHGDkDK5hlIg1W8bpXc
 Q0LwIZRq4/qhl7XbV7T5vqNhSPJUkSwEgJQOfRrv6Mc/1udkfsl6+YjJLoJhSXbY
 vYPVBvNlf+X6PBxewNkobigXKQRnBV7cCElzYtc3Nh+3gyBKFxDyKV1oCwUAcUDP
 2hw1PDy6oPXCTfV8FO4pKlcwleLwtqZ1jXhhrQX6wAAhF3O1CzRCeF/znxUQBbfW
 /1PYMCyHKfLY4NtAxPlj4Sq6AvSBMUklhoVydcJMceCM02Rl/Y6rs6HTtrJNdZd8
 NGQdyfnxTn7Kt+Mgp7TkuITpHCLQEHR1DGwMFk/oExQ9UwL3q/384s9ECswQA3/N
 EVf2eQlCkHT8jqTLNm5YKBxeJ1xBmt2HJoEYc2vHWMO23/y7BECfKdIRTqoZH2EI
 dn4H1n836tGD0O/z1StG4wir6RK0YLQXJiEzji30EXMcpdoElY7nK51QMn034EaQ
 PjIAoyqLOUJBcJg75FYO/fus4QLO6ujyLwKGuRxulPti+VTdO3PYhlGDKNC9BHpJ
 3HcRhu/uBha9nWjqv9BPI9PGNw/P3bCcgaolyk2wDvq2a91N9YvETtkYYiIdTKrE
 JUaUO+w4mzbju6Kn771JZK0xLTrklWNmwO1s9tzZjonOTz4f0jqIR0PYFtBf2JZg
 yMlAflZyQMJCZg==
 =Tr0P
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - driver fixes due to incorrect fwnode_handle_put() call

 - bt8xx: bttv_risc_packed(): remove field checks

 - vb2: frame_vector.c: replace WARN_ONCE with a comment

 - imx219: a couple typo fixes and perform a full mode set
   unconditionally

 - uvcvideo: Fix OOB read

 - some dependency fixes

* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
  media: vb2: frame_vector.c: replace WARN_ONCE with a comment
  media: uvcvideo: Fix OOB read
  media: bt8xx: bttv_risc_packed(): remove field checks
  media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
  media: i2c: imx219: Perform a full mode set unconditionally
  media: i2c: imx219: Fix crop rectangle setting when changing format
  media: i2c: imx219: Fix a typo referring to a wrong variable
  media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
  media: ivsc: Depend on VIDEO_DEV
  media: via: Use correct dependency for camera sensor drivers
  media: v4l: Use correct dependency for camera sensor drivers
  media: pci: ivsc: Select build dependencies
2023-09-20 12:09:23 -07:00
Qu Wenruo
74ee79142c btrfs: reset destination buffer when read_extent_buffer() gets invalid range
Commit f98b6215d7 ("btrfs: extent_io: do extra check for extent buffer
read write functions") changed how we handle invalid extent buffer range
for read_extent_buffer().

Previously if the range is invalid we just set the destination to zero,
but after the patch we do nothing and error out.

This can lead to smatch static checker errors like:

  fs/btrfs/print-tree.c:186 print_uuid_item() error: uninitialized symbol 'subvol_id'.
  fs/btrfs/tests/extent-io-tests.c:338 check_eb_bitmap() error: uninitialized symbol 'has'.
  fs/btrfs/tests/extent-io-tests.c:353 check_eb_bitmap() error: uninitialized symbol 'has'.
  fs/btrfs/uuid-tree.c:203 btrfs_uuid_tree_remove() error: uninitialized symbol 'read_subid'.
  fs/btrfs/uuid-tree.c:353 btrfs_uuid_tree_iterate() error: uninitialized symbol 'subid_le'.
  fs/btrfs/uuid-tree.c:72 btrfs_uuid_tree_lookup() error: uninitialized symbol 'data'.
  fs/btrfs/volumes.c:7415 btrfs_dev_stats_value() error: uninitialized symbol 'val'.

Fix those warnings by reverting back to the old memset() behavior.
By this we keep the static checker happy and would still make a lot of
noise when such invalid ranges are passed in.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f98b6215d7 ("btrfs: extent_io: do extra check for extent buffer read write functions")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:44:57 +02:00
Josef Bacik
58bfe2ccec btrfs: properly report 0 avail for very full file systems
A user reported some issues with smaller file systems that get very
full.  While investigating this issue I noticed that df wasn't showing
100% full, despite having 0 chunk space and having < 1MiB of available
metadata space.

This turns out to be an overflow issue, we're doing:

  total_available_metadata_space - SZ_4M < global_block_rsv_size

to determine if there's not enough space to make metadata allocations,
which overflows if total_available_metadata_space is < 4M.  Fix this by
checking to see if our available space is greater than the 4M threshold.
This makes df properly report 100% usage on the file system.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:44:40 +02:00
Filipe Manana
8ec0a4a577 btrfs: log message if extent item not found when running delayed extent op
When running a delayed extent operation, if we don't find the extent item
in the extent tree we just return -EIO without any logged message. This
indicates some bug or possibly a memory or fs corruption, so the return
value should not be -EIO but -EUCLEAN instead, and since it's not expected
to ever happen, print an informative error message so that if it happens
we have some idea of what went wrong, where to look at.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:42:58 +02:00
Filipe Manana
d2f79e6385 btrfs: remove redundant BUG_ON() from __btrfs_inc_extent_ref()
At __btrfs_inc_extent_ref() we are doing a BUG_ON() if we are dealing with
a tree block reference that has a reference count that is different from 1,
but we have already dealt with this case at run_delayed_tree_ref(), making
it useless. So remove the BUG_ON().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:42:47 +02:00
Filipe Manana
1bf76df3fe btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to 1
When running a delayed tree reference, if we find a ref count different
from 1, we return -EIO. This isn't an IO error, as it indicates either a
bug in the delayed refs code or a memory corruption, so change the error
code from -EIO to -EUCLEAN. Also tag the branch as 'unlikely' as this is
not expected to ever happen, and change the error message to print the
tree block's bytenr without the parenthesis (and there was a missing space
between the 'block' word and the opening parenthesis), for consistency as
that's the style we used everywhere else.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:42:33 +02:00
Filipe Manana
a7ddeeb079 btrfs: prevent transaction block reserve underflow when starting transaction
When starting a transaction, with a non-zero number of items, we reserve
metadata space for that number of items and for delayed refs by doing a
call to btrfs_block_rsv_add(), with the transaction block reserve passed
as the block reserve argument. This reserves metadata space and adds it
to the transaction block reserve. Later we migrate the space we reserved
for delayed references from the transaction block reserve into the delayed
refs block reserve, by calling btrfs_migrate_to_delayed_refs_rsv().

btrfs_migrate_to_delayed_refs_rsv() decrements the number of bytes to
migrate from the source block reserve, and this however may result in an
underflow in case the space added to the transaction block reserve ended
up being used by another task that has not reserved enough space for its
own use - examples are tasks doing reflinks or hole punching because they
end up calling btrfs_replace_file_extents() -> btrfs_drop_extents() and
may need to modify/COW a variable number of leaves/paths, so they keep
trying to use space from the transaction block reserve when they need to
COW an extent buffer, and may end up trying to use more space then they
have reserved (1 unit/path only for removing file extent items).

This can be avoided by simply reserving space first without adding it to
the transaction block reserve, then add the space for delayed refs to the
delayed refs block reserve and finally add the remaining reserved space
to the transaction block reserve. This also makes the code a bit shorter
and simpler. So just do that.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:42:18 +02:00
Filipe Manana
2ed45c0f18 btrfs: fix race when refilling delayed refs block reserve
If we have two (or more) tasks attempting to refill the delayed refs block
reserve we can end up with the delayed block reserve being over reserved,
that is, with a reserved space greater than its size. If this happens, we
are holding to more reserved space than necessary for a while.

The race happens like this:

1) The delayed refs block reserve has a size of 8M and a reserved space of
   6M for example;

2) Task A calls btrfs_delayed_refs_rsv_refill();

3) Task B also calls btrfs_delayed_refs_rsv_refill();

4) Task A sees there's a 2M difference between the size and the reserved
   space of the delayed refs rsv, so it will reserve 2M of space by
   calling btrfs_reserve_metadata_bytes();

5) Task B also sees that 2M difference, and like task A, it reserves
   another 2M of metadata space;

6) Both task A and task B increase the reserved space of block reserve
   by 2M, by calling btrfs_block_rsv_add_bytes(), so the block reserve
   ends up with a size of 8M and a reserved space of 10M;

7) The extra, over reserved space will eventually be freed by some task
   calling btrfs_delayed_refs_rsv_release() -> btrfs_block_rsv_release()
   -> block_rsv_release_bytes(), as there we will detect the over reserve
   and release that space.

So fix this by checking if we still need to add space to the delayed refs
block reserve after reserving the metadata space, and if we don't, just
release that space immediately.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-20 20:42:08 +02:00
Luca Weiss
eee9602ad6 arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
Add device tree for the Fairphone 5 smartphone which is based on
the QCM6490 SoC.

Supported features are, as of now:
* Bluetooth
* Debug UART
* Display via simplefb
* Flash/torch LED
* Flip cover sensor
* Power & volume buttons
* RTC
* SD card
* USB
* Various plumbing like regulators, i2c, spi, etc

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-7-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:36:06 -07:00
Luca Weiss
4b1a16d776 dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
Fairphone 5 is a smartphone based on the QCM6490 SoC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-6-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:36:06 -07:00
Luca Weiss
bfd4412a02 arm64: dts: qcom: pm8350c: Add flash led node
Add a node for the led controller found on PM8350C, used for flash and
torch purposes.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-4-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:36:06 -07:00
Luca Weiss
8e2d56f645 arm64: dts: qcom: pm7250b: make SID configurable
Like other Qualcomm PMICs the PM7250B can be used on different addresses
on the SPMI bus. Use similar defines like the PMK8350 to make this
possible but skip the ifndef based on maintainer feedback.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-3-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:36:06 -07:00
Luca Weiss
6da24ba932 arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
With the standard Qualcomm TrustZone setup, components such as lpasscc,
pdc_reset and watchdog shouldn't be touched by Linux. Mark them with
the status 'reserved' and reenable them in the chrome-common dtsi.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-1-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:36:05 -07:00
Konrad Dybcio
e1592981c5 remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
The PNoC clock is a clock for the entire PNoC bus, managed from
within the interconnect driver. Attaching it to MSS was a total hack.
Get rid of it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-rpm_clk_cleanup-v2-10-1e506593b1bd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:25:14 -07:00
Konrad Dybcio
e778190144 dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
The PNoC clock is a clock for the entire PNoC bus, managed from
within the interconnect driver. Attaching it to MSS was a total hack.
Get rid of it.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-rpm_clk_cleanup-v2-9-1e506593b1bd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:25:14 -07:00
Konrad Dybcio
c4c5b47958 dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
The AGGRE2 clock is a clock for the entire AGGRE2 bus, managed from
within the interconnect driver. Attaching it to SLPI was a total hack.
Get rid of it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-rpm_clk_cleanup-v2-8-1e506593b1bd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:25:14 -07:00
Gaurav Kohli
d40291e52d arm64: dts: qcom: msm8939: Fix iommu local address range
Fix the apps iommu local address space range as per data sheet.

Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230917140039.25283-1-quic_gkohli@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:16:26 -07:00
Linus Torvalds
a229cf67ab for-6.6-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmULIZUACgkQxWXV+ddt
 WDv77Q//ZiKpmevPQmQfUtmV8WwMfD2a9zRlKBpGggwtrD4mf3CYRLnOpTm81MPO
 vFIuYacBn+9UXqp2j/IbvNWfQAPQNVDxSPXx66uba93RJc+bB1J3TydxcEyJ7fr4
 dwhLLk01jttfk0+rnjF34fmXiHSTtI6D2WeaLCzUbaPLw4SZ+ul+GAdeF3P174iO
 OMNBUln7hK00Q7j8kFf4j6SW1yIIKMTl6MfOFJYanIqzx51PYFFVtKwoCr0Vt53v
 ZHbgrK582ZJO6pKF9kJF/1tqrY9/Df8jzgSypK8pew/SukMOrf7iVwrmhietuhKA
 92j5sxKhCRyq6Qg6ZwC0jyk+oMqrT8r+q3r38a5qDJx/9Q279vkXBqQnACfLjmnH
 6+sNdkY5/uBWnDMh/+d6yBtfbdW5DtuET4McYpJt1Nk2St/f3UzPaL4LcNkDXNPk
 t1Q4W4v0KS1V8TbsLfdD629CMghxQNKVs1XqyCAbUq9ub4LE2CtL3lDm730qZoZt
 +LM7+sAxEOJC6yqYfdEbcIc8l27Hl5nZEzamcvMrRz61N85/8Jx4Sq2b6VSE9TCE
 hNEWAL5sOjhuhmUPhatYC+KO1P6NDP+Yg99yZCZIT9s/P1oK5H+aETshWX+lvJ+Q
 Ai+qzKvp2ERHFcE+R5qIXs/uX7azpzjqsRZxY2/zdp70ugQDSXE=
 =0eEg
 -----END PGP SIGNATURE-----

Merge tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more followup fixes to the directory listing.

  People have noticed different behaviour compared to other filesystems
  after changes in 6.5. This is now unified to more "logical" and
  expected behaviour while still within POSIX. And a few more fixes for
  stable.

   - change behaviour of readdir()/rewinddir() when new directory
     entries are created after opendir(), properly tracking the last
     entry

   - fix race in readdir when multiple threads can set the last entry
     index for a directory

  Additionally:

   - use exclusive lock when direct io might need to drop privs and call
     notify_change()

   - don't clear uptodate bit on page after an error, this may lead to a
     deadlock in subpage mode

   - fix waiting pattern when multiple readers block on Merkle tree
     data, switch to folios"

* tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between reading a directory and adding entries to it
  btrfs: refresh dir last index during a rewinddir(3) call
  btrfs: set last dir index to the current last index when opening dir
  btrfs: don't clear uptodate on write errors
  btrfs: file_remove_privs needs an exclusive lock in direct io write
  btrfs: convert btrfs_read_merkle_tree_page() to use a folio
2023-09-20 11:03:45 -07:00
Luiz Augusto von Dentz
b938790e70 Bluetooth: hci_codec: Fix leaking content of local_codecs
The following memory leak can be observed when the controller supports
codecs which are stored in local_codecs list but the elements are never
freed:

unreferenced object 0xffff88800221d840 (size 32):
  comm "kworker/u3:0", pid 36, jiffies 4294898739 (age 127.060s)
  hex dump (first 32 bytes):
    f8 d3 02 03 80 88 ff ff 80 d8 21 02 80 88 ff ff  ..........!.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffb324f557>] __kmalloc+0x47/0x120
    [<ffffffffb39ef37d>] hci_codec_list_add.isra.0+0x2d/0x160
    [<ffffffffb39ef643>] hci_read_codec_capabilities+0x183/0x270
    [<ffffffffb39ef9ab>] hci_read_supported_codecs+0x1bb/0x2d0
    [<ffffffffb39f162e>] hci_read_local_codecs_sync+0x3e/0x60
    [<ffffffffb39ff1b3>] hci_dev_open_sync+0x943/0x11e0
    [<ffffffffb396d55d>] hci_power_on+0x10d/0x3f0
    [<ffffffffb30c99b4>] process_one_work+0x404/0x800
    [<ffffffffb30ca134>] worker_thread+0x374/0x670
    [<ffffffffb30d9108>] kthread+0x188/0x1c0
    [<ffffffffb304db6b>] ret_from_fork+0x2b/0x50
    [<ffffffffb300206a>] ret_from_fork_asm+0x1a/0x30

Cc: stable@vger.kernel.org
Fixes: 8961987f3f ("Bluetooth: Enumerate local supported codec and cache details")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:03:11 -07:00
Luiz Augusto von Dentz
dcda165706 Bluetooth: hci_core: Fix build warnings
This fixes the following warnings:

net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
 2620 |         snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
      |                                                      ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
 2620 |         snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
      |                                                  ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
 2620 |         snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:02:41 -07:00
Ying Hsu
1d8e801422 Bluetooth: Avoid redundant authentication
While executing the Android 13 CTS Verifier Secure Server test on a
ChromeOS device, it was observed that the Bluetooth host initiates
authentication for an RFCOMM connection after SSP completes.
When this happens, some Intel Bluetooth controllers, like AC9560, would
disconnect with "Connection Rejected due to Security Reasons (0x0e)".

Historically, BlueZ did not mandate this authentication while an
authenticated combination key was already in use for the connection.
This behavior was changed since commit 7b5a9241b7
("Bluetooth: Introduce requirements for security level 4").
So, this patch addresses the aforementioned disconnection issue by
restoring the previous behavior.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:02:22 -07:00
Luiz Augusto von Dentz
e0275ea521 Bluetooth: ISO: Fix handling of listen for unicast
iso_listen_cis shall only return -EADDRINUSE if the listening socket has
the destination set to BDADDR_ANY otherwise if the destination is set to
a specific address it is for broadcast which shall be ignored.

Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:02:02 -07:00
Ying Hsu
c7eaf80bfb Bluetooth: Fix hci_link_tx_to RCU lock usage
Syzbot found a bug "BUG: sleeping function called from invalid context
at kernel/locking/mutex.c:580". It is because hci_link_tx_to holds an
RCU read lock and calls hci_disconnect which would hold a mutex lock
since the commit a13f316e90 ("Bluetooth: hci_conn: Consolidate code
for aborting connections"). Here's an example call trace:

   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xfc/0x174 lib/dump_stack.c:106
   ___might_sleep+0x4a9/0x4d3 kernel/sched/core.c:9663
   __mutex_lock_common kernel/locking/mutex.c:576 [inline]
   __mutex_lock+0xc7/0x6e7 kernel/locking/mutex.c:732
   hci_cmd_sync_queue+0x3a/0x287 net/bluetooth/hci_sync.c:388
   hci_abort_conn+0x2cd/0x2e4 net/bluetooth/hci_conn.c:1812
   hci_disconnect+0x207/0x237 net/bluetooth/hci_conn.c:244
   hci_link_tx_to net/bluetooth/hci_core.c:3254 [inline]
   __check_timeout net/bluetooth/hci_core.c:3419 [inline]
   __check_timeout+0x310/0x361 net/bluetooth/hci_core.c:3399
   hci_sched_le net/bluetooth/hci_core.c:3602 [inline]
   hci_tx_work+0xe8f/0x12d0 net/bluetooth/hci_core.c:3652
   process_one_work+0x75c/0xba1 kernel/workqueue.c:2310
   worker_thread+0x5b2/0x73a kernel/workqueue.c:2457
   kthread+0x2f7/0x30b kernel/kthread.c:319
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298

This patch releases RCU read lock before calling hci_disconnect and
reacquires it afterward to fix the bug.

Fixes: a13f316e90 ("Bluetooth: hci_conn: Consolidate code for aborting connections")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:01:42 -07:00
Luiz Augusto von Dentz
941c998b42 Bluetooth: hci_sync: Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
When HCI_QUIRK_STRICT_DUPLICATE_FILTER is set LE scanning requires
periodic restarts of the scanning procedure as the controller would
consider device previously found as duplicated despite of RSSI changes,
but in order to set the scan timeout properly set le_scan_restart needs
to be synchronous so it shall not use hci_cmd_sync_queue which defers
the command processing to cmd_sync_work.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/578e6d7afd676129decafba846a933f5@agner.ch/#t
Fixes: 27d54b778a ("Bluetooth: Rework le_scan_restart for hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 11:00:49 -07:00
Robert Marko
f6aa7386bc dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
It seems that IPQ5018 compatible was never documented in the bindings.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230816164641.3371878-3-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:00:08 -07:00
Robert Marko
ff4aa3bc98 firmware: qcom_scm: disable SDI if required
IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
means that WDT being asserted or just trying to reboot will hang the board
in the debug mode and only pulling the power and repowering will help.
Some IPQ4019 boards like Google WiFI have it enabled as well.

Luckily, SDI can be disabled via an SCM call.

So, lets use the boolean DT property to identify boards that have SDI
enabled by default and use the SCM call to disable SDI during SCM probe.
It is important to disable it as soon as possible as we might have a WDT
assertion at any time which would then leave the board in debug mode,
thus disabling it during SCM removal is not enough.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-2-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 11:00:08 -07:00
Rocky Liao
187f8b648c Bluetooth: btusb: add shutdown function for QCA6174
We should send hci reset command before bt turn off, which can reset bt
firmware status.

Signed-off-by: Rocky Liao <quic_rjliao@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 10:55:29 -07:00
Yao Xiao
cbaabbcdcb Bluetooth: Delete unused hci_req_prepare_suspend() declaration
hci_req_prepare_suspend() has been deprecated in favor of
hci_suspend_sync().

Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20 10:55:29 -07:00
Fedor Pchelkin
9850ccd5dd dm zoned: free dmz->ddev array in dmz_put_zoned_devices
Commit 4dba12881f ("dm zoned: support arbitrary number of devices")
made the pointers to additional zoned devices to be stored in a
dynamically allocated dmz->ddev array. However, this array is not freed.

Rename dmz_put_zoned_device to dmz_put_zoned_devices and fix it to
free the dmz->ddev array when cleaning up zoned device information.
Remove NULL assignment for all dmz->ddev elements and just free the
dmz->ddev array instead.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 4dba12881f ("dm zoned: support arbitrary number of devices")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-09-20 13:48:06 -04:00
Chris Morgan
488ef44c06 power: supply: rk817: Fix node refcount leak
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.

Fixes: 54c03bfd09 ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-20 19:37:15 +02:00
Robert Marko
79796e8721 arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-4-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 10:35:04 -07:00
Robert Marko
92dab9ea5f dt-bindings: firmware: qcom,scm: support indicating SDI default state
IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
means that WDT being asserted or just trying to reboot will hang the board
in the debug mode and only pulling the power and repowering will help.
Some IPQ4019 boards like Google WiFI have it enabled as well.

So, lets add a boolean property to indicate that SDI is enabled by default
and thus needs to be disabled by the kernel.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 10:34:38 -07:00
Adam Skladowski
684277525c arm64: dts: qcom: msm8976: Fix ipc bit shifts
Update bits to match downstream irq-bitmask values.

Fixes: 0484d3ce09 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-8-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-20 10:21:50 -07:00