8250_mid uses FL_*BASE* from linux/8250_pci.h and nothing else. The
code can be simplified by directly defining BARs within the driver
instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230915094336.13278-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The probe process may generate EPROBE_DEFER. In this case
dev_err_probe() can still record err information. Otherwise
it may pollute logs on that occasion.
This also helps simplifing code and standardizing the error output.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230912165607.402580-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The probe process may generate EPROBE_DEFER. In this case
dev_err_probe() can still record err information. Otherwise
it may pollute logs on that occasion.
This also helps simplifing code and standardizing the error output.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230912165540.402504-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UART_IIR_64BYTE_FIFO is always being used in conjunction with
UART_IIR_FIFO_ENABLED. Introduce a joined UART_IIR_FIFO_ENABLED_16750
definition and use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230911144308.4169752-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add check for the return value of kstrdup() and return the error, if it
fails in order to avoid NULL pointer dereference.
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for break control to the stm32 serial driver.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230906151547.840302-1-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable vdev in hvcs_destruct_port() is set
but not used. Remove the variable and related code.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230908061726.2641-1-liubo03@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not used anywhere.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230905181649.134720-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Jacky Huang <ychuang3@nuvoton.com>
Link: https://lore.kernel.org/r/20230915071106.3347-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a result of the recent Kconfig reworks, the default settings for the
framebuffer interfaces changed in unexpected ways:
Configurations that leave CONFIG_FB disabled but use DRM now get
DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb
device nodes for machines that don't actually want it.
In turn, configurations that previously had DRM_FBDEV_EMULATION enabled
now only get the /dev/fb front-end but not the more useful framebuffer
console, which is not selected any more.
We had previously decided that any combination of the three frontends
(FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the
new default settings mean that a lot of defconfig files would have to
get adapted.
Change the defaults back to what they were in Linux 6.5:
- Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB
is enabled. Previously this was a hard dependency but now the two are
independent. However, configurations that enable CONFIG_FB probably
also want to keep the emulation for DRM, while those without FB
presumably did that intentionally in the past.
- Leave FB_DEVICE turned off for FB=n. Following the same
logic, the deprecated option should not automatically get enabled
here, most users that had FB turned off in the past do not want it,
even if they want the console
- Turn the FRAMEBUFFER_CONSOLE option on if
DRM_FBDEV_EMULATION is set to avoid having to change defconfig
files that relied on it being selected unconditionally in the past.
This also makes sense since both LOGO and FB_DEVICE are now disabled
by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION
would make no sense if all three are disabled.
Fixes: a5ae331edb ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION")
Fixes: 701d2054fa ("fbdev: Make support for userspace interfaces configurable")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911205338.2385278-1-arnd@kernel.org
The following compilation error is false alarm as RDMA devices don't
have such large amount of ports to actually cause to format truncation.
drivers/infiniband/core/cma_configfs.c: In function ‘make_cma_ports’:
drivers/infiniband/core/cma_configfs.c:223:57: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
223 | snprintf(port_str, sizeof(port_str), "%u", i + 1);
| ^
drivers/infiniband/core/cma_configfs.c:223:17: note: ‘snprintf’ output between 2 and 11 bytes into a destination of size 10
223 | snprintf(port_str, sizeof(port_str), "%u", i + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[5]: *** [scripts/Makefile.build:243: drivers/infiniband/core/cma_configfs.o] Error 1
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/a7e3b347ee134167fa6a3787c56ef231a04bc8c2.1694434639.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: 3f1071ec39 ("net: spider_net: Use struct_size() helper")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There should not be a blank line before the "help" keyword in the
ARCH_R9A07G043 configuration section.
Fixes: c6a906cce6 ("soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/2a3a9d595579b7cea416c12bf9abcfa2227243bb.1694768174.git.geert+renesas@glider.be
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: e034c6d23b ("tipc: Use struct_size() helper")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: b89fec54fd ("tls: rx: wrap decrypt params in a struct")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound, the
protection that `struct_size()` adds against potential integer overflows
is defeated. Fix this by hardening call to `struct_size()` with `size_mul()`.
Fixes: 2285ec872d ("mlxsw: spectrum_acl_bloom_filter: use struct_size() in kzalloc()")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mendes says:
====================
kselftest: rtnetlink: add additional command line options
Many other tests implement options like verbose, pause, and pause
on failure. These patches just add these options to rtnetlink.sh.
The same conventions are used as the tests that already have this
functionality: eg verbose is 0 or 1 but PAUSE is "yes" or "no".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'Pause' prompts the user to press Enter to continue running tests
once one test has finished. Pause on fail on prompts the user to press
enter only when a test fails.
Modifications to kci_test_addrlft() and kci_test_ipsec_offload()
ensure that whenever end_test is called, [$ret -ne 0] indicates
failure. This allows end_test to really easily implement pause on fail
functionality.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uses a run_cmd helper function similar to other selftests to add
verbose functionality i.e. print executed commands and their outputs
Many commands silence or redirect output. This can be removed since
the verbose helper function captures output anyway and only outputs it
if VERBOSE is true. Similarly, the helper command for pipes to grep
searches stderr and stdout. This makes output redirection unnecessary
in those cases.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
pds_core: add PCI reset handling
Make sure pds_core can handle and recover from PCI function resets and
similar PCI bus issues: add detection and handlers for PCI problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If we see a 0xff value from a PCI register read, we know that
the PCI connection is broken, possibly by a low level reset that
didn't go through the nice pci_error_handlers path.
Make use of the PCI cleanup code that we already have from the
reset handlers and add some detection and attempted recovery
from a broken PCI connection.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the callbacks for a nice PCI reset. These get called
when a user is nice enough to use the sysfs PCI reset entry, e.g.
echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep the viftypes and the current enable/disable states
across a recovery action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to what we do in the AdminQ, check for devcmd health
while waiting for an answer.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 9b9c8195f3.
The commit above is reverted as it did not solve the original issue.
gsm_cleanup_mux() tries to free up the virtual ttys by calling
gsm_dlci_release() for each available DLCI. There, dlci_put() is called to
decrease the reference counter for the DLCI via tty_port_put() which
finally calls gsm_dlci_free(). This already clears the pointer which is
being checked in gsm_cleanup_mux() before calling gsm_dlci_release().
Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux()
as done in the reverted commit. The commit introduces a null pointer
dereference:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x156/0x420
? search_exception_tables+0x37/0x50
? fixup_exception+0x21/0x310
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? tty_port_put+0x19/0xa0
gsmtty_cleanup+0x29/0x80 [n_gsm]
release_one_tty+0x37/0xe0
process_one_work+0x1e6/0x3e0
worker_thread+0x4c/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xe1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The actual issue is that nothing guards dlci_put() from being called
multiple times while the tty driver was triggered but did not yet finished
calling gsm_dlci_free().
Fixes: 9b9c8195f3 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230914051507.3240-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clarify the content of the r9a06g032_clkdesc structure by naming the
remaining anonymous structures defined inside. Renaming each field and
updating the doc then becomes necessary in order to avoid name
duplications and kdoc warnings.
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230913203805.465780-2-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mention the 'dual' structure in the kdoc. This fixes the following
W=1 warning during build:
> drivers/clk/renesas/r9a06g032-clocks.c:119: warning: Function parameter or member 'dual' not described in 'r9a06g032_clkdesc'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309101314.kTRoxND5-lkp@intel.com/
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230913203805.465780-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
flag and mux_flags are intended to keep bit masks. Use u32 type for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-15-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use FIELD_GET() for PLL register fields. This is its purpose.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bitmask << 16 is anyway set on both branches of if thus move it
before the if and set the lower bits of registers only in case clock is
enabled.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
core->name already contains the clock name thus, there is no
need to check the GET_SHIFT(core->conf) to decide on it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document RZ/G3S (R9A08G045) SYSC bindings. The SYSC block found on the
RZ/G3S SoC is similar to the one found on the RZ/G2UL.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
6 GHz regulatory domains introduces Power Spectral Density (PSD).
The PSD value of the regulatory rule should be taken into effect
for the ieee80211_channels falling into that particular regulatory
rule. Save the values in the channel which has PSD value and add
nl80211 attributes accordingly to handle it.
Co-developed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230914082026.3709-1-quic_wgong@quicinc.com
[use hole in chan flags, reword docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove duplicated includes of linux/cgroup.h and linux/psi.h. Both of
these includes are included regardless of the config and they are all
protected by ifndef, so no point including them again.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230818015633.18370-1-guozihua@huawei.com
If userspace quickly opens /dev/rfkill after a new
instance was created, it might see the old state of
the instance from before the sync work runs and may
even _change_ the state, only to have the sync work
change it again.
Fix this by doing the sync inline where needed, not
just for /dev/rfkill but also for sysfs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sebastian Andrzej Siewior says:
====================
net: hsr: Properly parse HSRv1 supervisor frames.
this is a follow-up to
https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/
replacing
https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/
by grabing/ adding tags and reposting with a commit message plus a
missing __packed to a struct (#2) plus extending the testsuite to sover
HSRv1 which is what broke here (#3-#5).
HSRv0 is (was) not affected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The testsuite already has simply tests for HSRv0. The testuite would
have been able to notice the v1 breakage if it was there at the time.
Extend the testsuite to also cover HSRv1.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code and group into functions so it will be easier to extend
the test to HSRv1 so that both versions are covered.
Move the ping/test part into do_complete_ping_test() and the interface
setup into setup_hsr_interfaces().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timeout in the while loop is never subtracted due wrong usage of
`let' leading to an endless loop if the former condition never gets
true.
Put the statement for let in quotes so it is parsed as a single
statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed
attribute to ensure the compiler does not add any padding.
Due to the size and __packed attribute of the structs that use
hsr_sup_tlv it has no functional impact.
Add __packed to struct hsr_sup_tlv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
While adding support for parsing the redbox supervision frames, the
author added `pull_size' and `total_pull_size' to track the amount of
bytes that were pulled from the skb during while parsing the skb so it
can be reverted/ pushed back at the end.
In the process probably copy&paste error occurred and for the HSRv1 case
the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used
instead of hsr_sup_tag. The later error didn't matter because both
structs have the size so HSRv0 was still working. It broke however HSRv1
parsing because struct ethhdr is larger than struct hsr_tag.
Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case
followed by hsr_sup_tag.
[bigeasy: commit message]
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")'
Suggested-by: Tristram.Ha@microchip.com
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code calling ima_free_kexec_buffer() runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range().
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid
that bug.
Fixes: fee3ff99bc ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Suggested-by: Mike Rappoport <rppt@kernel.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230817135558.67274c83@imladris.surriel.com
LKP reported below build warning:
vmlinux.o: warning: objtool: __tdx_hypercall+0x128: __tdx_hypercall_failed() is missing a __noreturn annotation
The __tdx_hypercall_failed() function definition already has __noreturn
annotation, but it turns out the __noreturn must be annotated to the
function declaration.
PeterZ explains:
"FWIW, the reason being that...
The point of noreturn is that the caller should know to stop generating
code. For that the declaration needs the attribute, because call sites
typically do not have access to the function definition in C."
Add __noreturn annotation to the declaration of __tdx_hypercall_failed()
to fix. It's not a bad idea to document the __noreturn nature at the
definition site either, so keep the annotation at the definition.
Note <asm/shared/tdx.h> is also included by TDX related assembly files.
Include <linux/compiler_attributes.h> only in case of !__ASSEMBLY__
otherwise compiling assembly file would trigger build error.
Also, following the objtool documentation, add __tdx_hypercall_failed()
to "tools/objtool/noreturns.h".
Fixes: c641cfb5c1 ("x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230918041858.331234-1-kai.huang@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309140828.9RdmlH2Z-lkp@intel.com/
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct udf_bitmap.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230915201404.never.574-kees@kernel.org>
When using sysbench to benchmark Postgres in a single docker instance
with sysbench's nr_threads set to nr_cpu, it is observed there are times
update_cfs_group() and update_load_avg() shows noticeable overhead on
a 2sockets/112core/224cpu Intel Sapphire Rapids(SPR):
13.75% 13.74% [kernel.vmlinux] [k] update_cfs_group
10.63% 10.04% [kernel.vmlinux] [k] update_load_avg
Annotate shows the cycles are mostly spent on accessing tg->load_avg
with update_load_avg() being the write side and update_cfs_group() being
the read side. tg->load_avg is per task group and when different tasks
of the same taskgroup running on different CPUs frequently access
tg->load_avg, it can be heavily contended.
E.g. when running postgres_sysbench on a 2sockets/112cores/224cpus Intel
Sappire Rapids, during a 5s window, the wakeup number is 14millions and
migration number is 11millions and with each migration, the task's load
will transfer from src cfs_rq to target cfs_rq and each change involves
an update to tg->load_avg. Since the workload can trigger as many wakeups
and migrations, the access(both read and write) to tg->load_avg can be
unbound. As a result, the two mentioned functions showed noticeable
overhead. With netperf/nr_client=nr_cpu/UDP_RR, the problem is worse:
during a 5s window, wakeup number is 21millions and migration number is
14millions; update_cfs_group() costs ~25% and update_load_avg() costs ~16%.
Reduce the overhead by limiting updates to tg->load_avg to at most once
per ms. The update frequency is a tradeoff between tracking accuracy and
overhead. 1ms is chosen because PELT window is roughly 1ms and it
delivered good results for the tests that I've done. After this change,
the cost of accessing tg->load_avg is greatly reduced and performance
improved. Detailed test results below.
==============================
postgres_sysbench on SPR:
25%
base: 42382±19.8%
patch: 50174±9.5% (noise)
50%
base: 67626±1.3%
patch: 67365±3.1% (noise)
75%
base: 100216±1.2%
patch: 112470±0.1% +12.2%
100%
base: 93671±0.4%
patch: 113563±0.2% +21.2%
==============================
hackbench on ICL:
group=1
base: 114912±5.2%
patch: 117857±2.5% (noise)
group=4
base: 359902±1.6%
patch: 361685±2.7% (noise)
group=8
base: 461070±0.8%
patch: 491713±0.3% +6.6%
group=16
base: 309032±5.0%
patch: 378337±1.3% +22.4%
=============================
hackbench on SPR:
group=1
base: 100768±2.9%
patch: 103134±2.9% (noise)
group=4
base: 413830±12.5%
patch: 378660±16.6% (noise)
group=8
base: 436124±0.6%
patch: 490787±3.2% +12.5%
group=16
base: 457730±3.2%
patch: 680452±1.3% +48.8%
============================
netperf/udp_rr on ICL
25%
base: 114413±0.1%
patch: 115111±0.0% +0.6%
50%
base: 86803±0.5%
patch: 86611±0.0% (noise)
75%
base: 35959±5.3%
patch: 49801±0.6% +38.5%
100%
base: 61951±6.4%
patch: 70224±0.8% +13.4%
===========================
netperf/udp_rr on SPR
25%
base: 104954±1.3%
patch: 107312±2.8% (noise)
50%
base: 55394±4.6%
patch: 54940±7.4% (noise)
75%
base: 13779±3.1%
patch: 36105±1.1% +162%
100%
base: 9703±3.7%
patch: 28011±0.2% +189%
==============================================
netperf/tcp_stream on ICL (all in noise range)
25%
base: 43092±0.1%
patch: 42891±0.5%
50%
base: 19278±14.9%
patch: 22369±7.2%
75%
base: 16822±3.0%
patch: 17086±2.3%
100%
base: 18216±0.6%
patch: 18078±2.9%
===============================================
netperf/tcp_stream on SPR (all in noise range)
25%
base: 34491±0.3%
patch: 34886±0.5%
50%
base: 19278±14.9%
patch: 22369±7.2%
75%
base: 16822±3.0%
patch: 17086±2.3%
100%
base: 18216±0.6%
patch: 18078±2.9%
Reported-by: Nitin Tekchandani <nitin.tekchandani@intel.com>
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Vernet <void@manifault.com>
Tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Tested-by: Swapnil Sapkal <Swapnil.Sapkal@amd.com>
Link: https://lkml.kernel.org/r/20230912065808.2530-2-aaron.lu@intel.com