After commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic"),
tasks that transition directly from TASK_FREEZABLE to TASK_FROZEN are
always woken up on the thaw path. Prior to that commit, tasks could ask
freezer to consider them "frozen enough" via freezer_do_not_count(). The
commit replaced freezer_do_not_count() with a TASK_FREEZABLE state which
allows freezer to immediately mark the task as TASK_FROZEN without
waking up the task. This is efficient for the suspend path, but on the
thaw path, the task is always woken up even if the task didn't need to
wake up and goes back to its TASK_(UN)INTERRUPTIBLE state. Although
these tasks are capable of handling of the wakeup, we can observe a
power/perf impact from the extra wakeup.
We observed on Android many tasks wait in the TASK_FREEZABLE state
(particularly due to many of them being binder clients). We observed
nearly 4x the number of tasks and a corresponding linear increase in
latency and power consumption when thawing the system. The latency
increased from ~15ms to ~50ms.
Avoid the spurious wakeups by saving the state of TASK_FREEZABLE tasks.
If the task was running before entering TASK_FROZEN state
(__refrigerator()) or if the task received a wake up for the saved
state, then the task is woken on thaw. saved_state from PREEMPT_RT locks
can be re-used because freezer would not stomp on the rtlock wait flow:
TASK_RTLOCK_WAIT isn't considered freezable.
Reported-by: Prakash Viswalingam <quic_prakashv@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for freezer to also use saved_state, remove the
CONFIG_PREEMPT_RT compilation guard around saved_state.
On the arm64 platform I tested which did not have CONFIG_PREEMPT_RT,
there was no statistically significant deviation by applying this patch.
Test methodology:
perf bench sched message -g 40 -l 40
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The erdma_create_scatter_mtt() function is supposed to return error
pointers. Returning NULL will lead to an Oops.
Fixes: ed10435d35 ("RDMA/erdma: Implement hierarchical MTT")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1eb400d5-d8a3-4a8e-b3da-c43c6c377f86@moroto.mountain
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add support to fetch firmware info such as heartbeat miss count,
heartbeat interval. This shall be used for heartbeat monitor.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not necessary to carry separate suspended status information in
intel_runtime_pm struct as this information is already in underlying device
structure. Remove it and use pm_runtime_suspended() to obtain suspended
status information when needed.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913100430.3433969-1-jouni.hogander@intel.com
Add HyperX controller support to xpad_device and xpad_table.
Suggested-by: Chris Toledanes <chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230906231514.4291-1-hphyperxdev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix typo in DT name for TDES node.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230906135838.59247-1-nicolas.ferre@microchip.com
[claudiu.beznea: removed fixes tag as tdes node is not referenced
anywhere by its node name]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Syzkaller reported a sleep in atomic context bug relating to the HASHCHK
handler logic:
BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by syz-executor/25040.
irq event stamp: 34
hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline]
hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230
hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176
softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries
Call Trace:
[c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189
[c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853
[c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518
[c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0
To determine if a trap was caused by a HASHCHK instruction, we inspect
the user instruction that triggered the trap. However this may sleep
if the page needs to be faulted in (get_user_instr() reaches
__get_user(), which calls might_fault() and triggers the bug message).
Move the HASHCHK handler logic to after we allow IRQs, which is fine
because we are only interested in HASHCHK if it's a user space trap.
Fixes: 5bcba4e6c1 ("powerpc/dexcr: Handle hashchk exception")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230915034604.45393-1-bgray@linux.ibm.com
It used to be impossible to select CONFIG_CPM2 without selecting
CONFIG_FSL_SOC at the same time because CONFIG_CPM2 was dependent
on CONFIG_8260 and CONFIG_8260 was selecting CONFIG_FSL_SOC.
But after commit eb5aa21372 ("powerpc/82xx: Remove CONFIG_8260
and CONFIG_8272") CONFIG_CPM2 depends on CONFIG_PPC_82xx instead
but CONFIG_PPC_82xx doesn't directly selects CONFIG_FSL_SOC.
Fix it by forcing CONFIG_PPC_82xx to select CONFIG_FSL_SOC just
like already done by PPC_8xx, PPC_MPC512x, PPC_83xx, PPC_86xx.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: eb5aa21372 ("powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7ab513546148ebe33ddd4b0ea92c7bfd3cce3ad7.1694705016.git.christophe.leroy@csgroup.eu
We recently added support for -fpatchable-function-entry and it is
enabled by default on ppc32 (ppc64 needs gcc v13.1.0). When building the
kernel for ppc32 and also enabling CONFIG_LD_DEAD_CODE_DATA_ELIMINATION,
we see the below build error with older gcc versions:
powerpc-linux-gnu-ld: init/main.o(__patchable_function_entries): error: need linked-to section for --gc-sections
This error is thrown since __patchable_function_entries section would be
garbage collected with --gc-sections since it does not reference any
other kept sections. This has subsequently been fixed with:
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=b7d072167715829eed0622616f6ae0182900de3e
Disable LD_DEAD_CODE_DATA_ELIMINATION for gcc versions before v11.1.0 if
using -fpatchable-function-entry to avoid this bug.
Fixes: 0f71dcfb4a ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230913134129.2782088-1-naveen@kernel.org
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.
In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564b ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3eb ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
Add more config options that wouldn't be done by the generic debug
config in kernel/configs/debug.config
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
Adds an initialized check on each (cpu|mmu)_has_feature()
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
Adds some extra checks around IRQ mask manipulation
CONFIG_PPC_KUAP_DEBUG
Adds some extra KAUP checks around interrupts/context switching
CONFIG_PPC_RFI_SRR_DEBUG
Adds some extra SSR checks around interrupts/syscalls
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230830044238.578840-1-bgray@linux.ibm.com
Currently, is_kdump_kernel() returns true in crash dump capture kernel
for both kdump and fadump crash dump capturing methods, as both these
methods set elfcorehdr_addr. Some restrictions enforced for crash dump
capture kernel, based on is_kdump_kernel(), are specifically meant for
kdump case and not desirable for fadump - eg. IO queues restriction in
device drivers. So, define is_kdump_kernel() to return false when f/w
assisted dump is active.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230912082950.856977-2-hbathini@linux.ibm.com
Currently, is_kdump_kernel() returns true when elfcorehdr_addr is set.
While elfcorehdr_addr is set for kexec based kernel dump mechanism,
alternate dump capturing methods like fadump [1] also set it to export
the vmcore. Since, is_kdump_kernel() is used to restrict resources in
crash dump capture kernel and such restrictions may not be desirable
for fadump, allow is_kdump_kernel() to be defined differently for such
scenarios. With this, is_kdump_kernel() could be false while vmcore is
usable. So, remove unnecessary dependency with is_kdump_kernel(), for
exporting vmcore.
[1] https://docs.kernel.org/powerpc/firmware-assisted-dump.html
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230912082950.856977-1-hbathini@linux.ibm.com
Presently, while reading a vmcore, makedumpfile uses
`cur_cpu_spec.mmu_features` to decide whether the crashed system had
RADIX MMU or not.
Currently, makedumpfile fails to get the `cur_cpu_spec` symbol (unless
a vmlinux is passed with the `-x` flag to makedumpfile), and hence
assigns offsets and shifts (such as pgd_offset_l4) incorrecly considering
MMU to be hash MMU.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the
`cpu_spec` struct, to VMCOREINFO, so that the symbol address and offset
is accessible to makedumpfile, without needing the vmlinux file
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230911091409.415662-1-adityag@linux.ibm.com
Enable POWER_RESET, and drop ADB_CUDA as it will now be selected.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/73716a14e9a24bcea4ca6c454aae308c419933c6.1694685860.git.tanyuan@tinylab.org
for_each_node_with_property performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230907095521.14053-7-Julia.Lawall@inria.fr
for_each_node_by_name performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230907095521.14053-4-Julia.Lawall@inria.fr
Running commands such as
# ./perf stat -e cs -- true
Segmentation fault (core dumped)
# ./perf stat -e cpu-clock-- true
Segmentation fault (core dumped)
#
dump core. This should not happen as these events are defined
even when no hardware PMU is available.
Debugging this reveals this call chain:
perf_pmus__find_by_type(type=1)
+--> pmu_read_sysfs(core_only=false)
+--> perf_pmu__find2(dirfd=3, name=0x152a113 "software")
+--> perf_pmu__lookup(pmus=0x14f0568 <other_pmus>, dirfd=3,
lookup_name=0x152a113 "software")
+--> perf_pmu__find_events_table (pmu=0x1532130)
Now the pmu is "software" and it tries to find a proper table
generated by the pmu-event generation process for s390:
# cd pmu-events/
# ./jevents.py s390 all /root/linux/tools/perf/pmu-events/arch |\
grep -E '^const struct pmu_table_entry'
const struct pmu_table_entry pmu_events__cf_z10[] = {
const struct pmu_table_entry pmu_events__cf_z13[] = {
const struct pmu_table_entry pmu_metrics__cf_z13[] = {
const struct pmu_table_entry pmu_events__cf_z14[] = {
const struct pmu_table_entry pmu_metrics__cf_z14[] = {
const struct pmu_table_entry pmu_events__cf_z15[] = {
const struct pmu_table_entry pmu_metrics__cf_z15[] = {
const struct pmu_table_entry pmu_events__cf_z16[] = {
const struct pmu_table_entry pmu_metrics__cf_z16[] = {
const struct pmu_table_entry pmu_events__cf_z196[] = {
const struct pmu_table_entry pmu_events__cf_zec12[] = {
const struct pmu_table_entry pmu_metrics__cf_zec12[] = {
const struct pmu_table_entry pmu_events__test_soc_cpu[] = {
const struct pmu_table_entry pmu_metrics__test_soc_cpu[] = {
const struct pmu_table_entry pmu_events__test_soc_sys[] = {
#
However event "software" is not listed, as can be seen in the
generated const struct pmu_events_map pmu_events_map[].
So in function perf_pmu__find_events_table(), the variable
table is initialized to NULL, but never set to a proper
value. The function scans all generated &pmu_events_map[]
tables, but no table matches, because the tables are
s390 CPU Measurement unit specific:
i = 0;
for (;;) {
const struct pmu_events_map *map = &pmu_events_map[i++];
if (!map->arch)
break;
--> the maps are there because the build generated them
if (!strcmp_cpuid_str(map->cpuid, cpuid)) {
table = &map->event_table;
break;
}
--> Since no matching CPU string the table var remains 0x0
}
free(cpuid);
if (!pmu)
return table;
--> The pmu is "software" so it exists and no return
--> and here perf dies because table is 0x0
for (i = 0; i < table->num_pmus; i++) {
...
}
return NULL;
Fix this and do not access the table variable. Instead return 0x0
which is the same return code when the for-loop was not successful.
Output after:
# ./perf stat -e cs -- true
Performance counter stats for 'true':
0 cs
0.000853105 seconds time elapsed
0.000061000 seconds user
0.000827000 seconds sys
# ./perf stat -e cpu-clock -- true
Performance counter stats for 'true':
0.25 msec cpu-clock # 0.341 CPUs utilized
0.000728383 seconds time elapsed
0.000055000 seconds user
0.000706000 seconds sys
# ./perf stat -e cycles -- true
Performance counter stats for 'true':
<not supported> cycles
0.000767298 seconds time elapsed
0.000055000 seconds user
0.000739000 seconds sys
#
Fixes: 7c52f10c0d ("perf pmu: Cache JSON events table")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: dengler@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20230913125157.2790375-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723dbb96 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The parser wraps all strings as Events, so the input is an
Event. Using a string would be bad as functions like Simplify are
called on the arguments, which wouldn't be present on a string.
Fixes: 9d5da30e4a ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230914022204.1488383-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make part of an existing TODO conditional to avoid the following build
error:
```
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:14: error: cannot combine with previous 'char' declaration specifier
26 | typedef char bool;
| ^
include/stdbool.h:20:14: note: expanded from macro 'bool'
20 | #define bool _Bool
| ^
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:1: error: typedef requires a name [-Werror,-Wmissing-declarations]
26 | typedef char bool;
| ^~~~~~~~~~~~~~~~~
2 errors generated.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230913184957.230076-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Fix an UV boot crash,
- Skip spurious ENDBR generation on _THIS_IP_,
- Fix ENDBR use in putuser() asm methods,
- Fix corner case boot crashes on 5-level paging,
- and fix a false positive WARNING on LTO kernels.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BMjT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
balancing bug, and a topology setup bug on (Intel) hybrid processors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jIeN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
If, for any reason, `tx_stats_num + rx_stats_num` wraps around, the
protection that struct_size() adds against potential integer overflows
is defeated. Fix this by hardening call to struct_size() with size_add().
Fixes: 691f4077d5 ("gve: Replace zero-length array with flexible-array member")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Align x86 with other EFI architectures, and increase the section
alignment to the EFI page size (4k), so that firmware is able to honour
the section permission attributes and map code read-only and data
non-executable.
There are a number of requirements that have to be taken into account:
- the sign tools get cranky when there are gaps between sections in the
file view of the image
- the virtual offset of each section must be aligned to the image's
section alignment
- the file offset *and size* of each section must be aligned to the
image's file alignment
- the image size must be aligned to the section alignment
- each section's virtual offset must be greater than or equal to the
size of the headers.
In order to meet all these requirements, while avoiding the need for
lots of padding to accommodate the .compat section, the latter is placed
at an arbitrary offset towards the end of the image, but aligned to the
minimum file alignment (512 bytes). The space before the .text section
is therefore distributed between the PE header, the .setup section and
the .compat section, leaving no gaps in the file coverage, making the
signing tools happy.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-18-ardb@google.com
Describe the code and data of the decompressor binary using separate
.text and .data PE/COFF sections, so that we will be able to map them
using restricted permissions once we increase the section and file
alignment sufficiently. This avoids the need for memory mappings that
are writable and executable at the same time, which is something that
is best avoided for security reasons.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-17-ardb@google.com
Ancient buggy EFI loaders may have required a .reloc section to be
present at some point in time, but this has not been true for a long
time so the .reloc section can just be dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-16-ardb@google.com
Now that the size of the setup block is visible to the assembler, it is
possible to populate the PE/COFF header fields from the asm code
directly, instead of poking the values into the binary using the build
tool. This will make it easier to reorganize the section layout without
having to tweak the build tool in lockstep.
This change has no impact on the resulting bzImage binary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-15-ardb@google.com
Tweak the linker script so that the value of _edata represents the
decompressor binary's file size rounded up to the appropriate alignment.
This removes the need to calculate it in the build tool, and will make
it easier to refer to the file size from the header directly in
subsequent changes to the PE header layout.
While adding _edata to the sed regex that parses the compressed
vmlinux's symbol list, tweak the regex a bit for conciseness.
This change has no impact on the resulting bzImage binary when
configured with CONFIG_EFI_STUB=y.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-14-ardb@google.com
The setup block contains the real mode startup code that is used when
booting from a legacy BIOS, along with the boot_params/setup_data that
is used by legacy x86 bootloaders to pass the command line and initial
ramdisk parameters, among other things.
The setup block also contains the PE/COFF header of the entire combined
image, which includes the compressed kernel image, the decompressor and
the EFI stub.
This PE header describes the layout of the executable image in memory,
and currently, the fact that the setup block precedes it makes it rather
fiddly to get the right values into the right place in the final image.
Let's make things a bit easier by defining the setup_size in the linker
script so it can be referenced from the asm code directly, rather than
having to rely on the build tool to calculate it. For the time being,
add 64 bytes of fixed padding for the .reloc and .compat sections - this
will be removed in a subsequent patch after the PE/COFF header has been
reorganized.
This change has no impact on the resulting bzImage binary when
configured with CONFIG_EFI_MIXED=y.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-13-ardb@google.com
The offsets of the EFI handover entrypoints are available to the
assembler when constructing the header, so there is no need to set them
from the build tool afterwards.
This change has no impact on the resulting bzImage binary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-12-ardb@google.com
Instead of parsing zoffset.h and poking the kernel_info offset value
into the header from the build tool, just grab the value directly in the
asm file that describes this header.
This change has no impact on the resulting bzImage binary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-11-ardb@google.com
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f9 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e16 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=WtnH
-----END PGP SIGNATURE-----
Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
=DopS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
queue
Tony Nguyen says:
====================
This series contains updates to iavf and i40e drivers.
Radoslaw prevents admin queue operations being added when the driver is
being removed for iavf.
Petr Oros immediately starts reconfiguration on changes to VLANs on
iavf.
Ivan Vecera moves reset of VF to occur after port VLAN values are set
on i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor
pointing to non TCP socket (af_unix for example).
Return -EINVAL if this is attempted, instead of crashing the kernel.
Fixes: 7ba2471389 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: open-iscsi@googlegroups.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/test: add recv_buf()/send_buf() utility functions and some improvements
We recently found that some tests were failing [1].
The problem was that we were not waiting for all the bytes correctly,
so we had a partial read. I had initially suggested using MSG_WAITALL,
but this could have timeout problems.
Since we already had send_byte() and recv_byte() that handled the timeout,
but also the expected return value, I moved that code to two new functions
that we can now use to send/receive generic buffers.
The last commit is just an improvement to a test I found difficult to
understand while using the new functions.
@Arseniy a review and some testing are really appreciated :-)
[1] https://lore.kernel.org/netdev/63xflnwiohdfo6m3vnrrxgv2ulplencpwug5qqacugqh7xxpu3@tsczkuqgwurb/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>