The MPTCP protocol currently clears the msk token both at connect() and
listen() time. That is needed to deal with failing connect() calls that
can create a new token while leaving the sk in TCP_CLOSE,SS_UNCONNECTED
status and thus allowing later connect() and/or listen() calls.
Let's deal with such failures explicitly, cleaning the token in a timely
manner and avoid the confusing early mptcp_token_destroy().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debug print for enabling SDP CRC16 is applicable only for DP2.0, but
this debug print was not within the uhbr check and was always printed.
Fix this by adding proper checks and returning.
v2: Fix typo in commit message (Ankit)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230808042000.3210715-1-arun.r.murthy@intel.com
On checking DSC1.1 Errata and DSC 1.2 spec the current formula
we were using was incorrect to calculate first_line_bpg_offset.
The new fixed formula is derived from C model.
--v2
-Use clamp function in linux/minmax.h [Ankit]
--v3
-remove linux/minmax.h header
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804083737.3844575-1-suraj.kandpal@intel.com
Similar to A5, E5 uses a Melfas MMS345L touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812071448.4710-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This is the parent clock of gpll0_early, so it needs to be enabled
for gpll0_early to return the correct rate. Enable GPLL0_SLEEP_CLK_SRC
by adding its existing definition to the clock list.
This clock also doesn't work with clk_alpha_pll_ops, use
clk_branch_simple_ops instead to make it enable and disable correctly.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Link: https://lore.kernel.org/r/20230802170317.205112-3-otto.pflueger@abscue.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing #define for GPLL0_SLEEP_CLK_SRC, the parent clock of
GPLL0_EARLY.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802170317.205112-2-otto.pflueger@abscue.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When initially submitted, the sc7180 support only targeted CROS devices
that make use of alternative TF-A firmware and not the official Qualcomm
firmware. The PSCI implementations in those firmwares differ however so
devices that use qcom firmware, like WoA laptops such as aspire1 need
different setup.
This commit adjusts the SoC dtsi to the OSI mode PSCI setup, common to
the Qualcomm firmware and introduces new sc7180-firmware-tfa.dtsi that
overrides the PSCI setup for the PC mode and uses TF-A specific
psci-suspend-param. This dtsi is added to all boards that appear to use
TF-A.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230808-sc7180-tfa-fw-v1-1-666d5d8467e5@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock RCGs are required to be parked at safe clock source(XO)
during disable as per the hardware expectation and clk_rcg2_shared_ops
are the closest implementation for the same. Hence update the clock
RCG ops to clk_rcg2_shared_ops.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-9-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the GCC SDCC clock RCG ops to clk_rcg2_floor_ops to avoid
the overclocking issues on QDU1000 and QRU1000 SoCs.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-8-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the GDSCs support for QDU1000 and QRU1000 SoCs.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-7-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the gcc_ddrss_ecpri_gsi_clk support as per the latest hardware
version of QDU1000 and QRU100 SoCs.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-6-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
gcc_gpll1_out_even clock is referenced as a parent, but not registered
with the clock framework. Hence add support to register the same.
Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-5-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the GCC clkref clock's halt_check to BRANCH_HALT, as it's
status bit is not inverted in the latest hardware version of QDU1000
and QRU1000 SoCs. While at it, fix the gcc clkref clock ops as well.
Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-4-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix the gcc pcie pipe clock handling as per the clk_regmap_phy_mux_ops
implementation to let the clock framework automatically park the clock
at XO when the clock is switched off and restore the parent when the
clock is switched on.
Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-3-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the
maintainers list.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disappointigly, the camera activity LED is implemented in software.
Hook it up as a gpio-led and (until we have camera *and* a "camera on"
LED trigger) configure it as a panic indicator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-x13s_cam_led-v1-1-443d752158c4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pins 83-86 and 158-160 are NC, so there's no point in keeping them
reserved. Take care of that.
Fixes: 32c231385e ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the required nodes to support the display hardware on msm8998.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[konrad: update the commit msg and AGdR's email, rebase]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-8998_dpu-v1-1-9d402dc1ecc0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add rpmhpd node and opps for this node to the SDX75 dts.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-9-git-send-email-quic_rohiagar@quicinc.com
[bjorn: include qcom-rpmpd.h as well]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MMSS SMMU has its own power domain. Attach it so that we can drop
the "keep it always-on" hack.
Fixes: 05ce21b544 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MMSS SMMU has been abusingly consuming the exposed RPM interconnect
clock. Drop it.
Fixes: 05ce21b544 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the floor ops to prevent warnings like this at suspend exit and boot:
mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz
Fixes: db0c944ee9 ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With the removal of the mem noc clocks in the commit e224dc703521 ("clk:
qcom: gcc-ipq5332: drop the mem noc clocks"), we can drop the
gcc_apss_axi_clk_src clock as well, since there are no clocks uses this
clock as a parent.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-3-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to the recent design changes, all the mem noc clocks will be
configured by the bootloaders and it will be access protected by the TZ
firmware. So drop these clocks from the GCC driver.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230710102807.1189942-2-quic_kathirav@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MMCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
We've already been using the correct one in the non-div case, start
doing so for the other one as well.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-8-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPUCC has its own GPLL0 leg, switch to it to allow shutting it down
when it's unused.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-7-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
Add .name lookup to make sure older DTs consume the correct clock.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed
child of MMSS_GPLL0_DIV that's always-on. Properly representing the
former in the GCC driver makes us unable to keep doing so.
Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a
fixed .name link to keep backwards compatibility.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Up until now, we've been relying on some non-descript hardware magic
to pinkypromise turn the clocks on for us. While new SoCs shine with
that feature, MSM8998 can not always be fully trusted.
Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual
enable voting.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We've not been consuming that clock for no apparent reason. Describe it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-2-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's
2-divided and one that runs at the same rate as the GPLL0 itself.
Add the missing ones to the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230616083238.20690-2-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At the moment we define a single ov5640 sensor in the apq8016-sbc and
disable that sensor.
The sensor mezzanine for this is a D3 Engineering Dual ov5640 mezzanine
card. Move the definition from the apq8016-sbc where it shouldn't be to a
standalone dts.
Enables the sensor by default, as we are adding a standalone mezzanine
structure.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-7-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are two control lines controlled by GPIO going into ov5640
- Reset
- Powerdown
The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has
never been an "enable-gpios".
Fixes: 39e0ce6cd1 ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-6-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The driver for the ov5640 doesn't do a set-rate, instead it expects the
clock to already be set at an appropriate rate.
Similarly the yaml for ov5640 doesn't understand clock-frequency. Convert
from clock-rate to assigned-clock and assigned-clock-rate to remediate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-5-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The yaml constraint for data-lanes is [1, 2] not [0, 2]. The driver itself
doesn't do anything with the data-lanes declaration save count the number
of specified data-lanes and calculate the link rate so, this change doesn't
have any functional side-effects.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-4-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>