SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced804 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Soft lockup occurs when reading file 'trace_pipe':
watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
[...]
RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
[...]
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__find_next_entry+0x1a8/0x4b0
? peek_next_entry+0x250/0x250
? down_write+0xa5/0x120
? down_write_killable+0x130/0x130
trace_find_next_entry_inc+0x3b/0x1d0
tracing_read_pipe+0x423/0xae0
? tracing_splice_read_pipe+0xcb0/0xcb0
vfs_read+0x16b/0x490
ksys_read+0x105/0x210
? __ia32_sys_pwrite64+0x200/0x200
? switch_fpu_return+0x108/0x220
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu().
Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: a5fb833172 ("ring-buffer: Fix uninitialized read_stamp")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
These are all tracing W=1 warnings in arm64 allmodconfig about missing
prototypes:
kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro
totypes]
kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes]
arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]
Move the declarations to an appropriate header where they can be seen
by the caller and callee, and make sure the headers are included where
needed.
Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The self tests for user_events currently does not ensure that the edge
case for struct types work properly with size differences.
Add cases for mis-matching struct names and sizes to ensure they work
properly.
Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make IS_ERR() judge the debugfs_create_dir() function return.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Instead of relying on free-form comments to document locking
requirements use well-known lockdep annotations.
These can also be validated at runtime make sure the invariants are not
violated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230704-thinkpad_acpi-lockdep-v1-2-60129548a738@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
hotkey_mask_set() and hotkey_mask_get() expect hotkey_mutex to be held.
While it should not matter during initialization a following patch will
enable lockdep for hotkey_mutex which would produce warnings here.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230704-thinkpad_acpi-lockdep-v1-1-60129548a738@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Expose various CPU and dGPU tunables that are available on many ASUS
ROG laptops. The tunables shown in sysfs will vary depending on the CPU
and dGPU vendor.
All of these variables are write only and there is no easy way to find
what the defaults are. In general they seem to default to the max value
the vendor sets for the CPU and dGPU package - this is not the same as
the min/max writable value. Values written to these variables that are
beyond the capabilities of the CPU are ignored by the laptop.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add session context buffer to decoder ring test for vcn v1 to v3.
v3 - correct the cmd for sesssion ctx buf
v2 - add the buffer into IB (Leo liu)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add session context buffer to decoder ring test.
v5 - clear the session ct buffer (Christian)
v4 - data type, explain change of ib size change (Christian)
v3 - indent and v2 changes correction. (Christian)
v2 - put the buffer at the end of the IB (Christian)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.
The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.
Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.
This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX9.4.3, setup a reduced default CWSR grace period equal to
1000 cycles instead of 64000 cycles.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix five occurrences of the checkpatch.pl error:
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix eleven occurrences of the checkpatch.pl error:
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix four occurrences of the checkpatch.pl error:
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix four occurrences of the checkpatch.pl error:
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix nine occurrences of the checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the old ones with psp_execute_load_ip_fw.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will make this function more general, and then serve other IPs.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to GC v9.4.2, GC v9.4.3 should use the 5-Dword extended
MAP_PROCESS packet to support multi-process debugging. Update the
mutli-process debug support list so that the KFD updates the runlist
on debug mode setting and that it allocates enough GTT memory during
KFD device initialization.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set watch points for all xcc instances on GFX943.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional information that the KFD reports to the debugger was
destroyed when the following commit was merged:
"drm/amdkfd: convert switches to IP version checking"
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support changing the mini-LED mode on some of the newer ASUS laptops.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-8-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add safety checking to dgpu_disable, egpu_enable, gpu_mux_mode.
These checks prevent users from doing such things as:
- disabling the dGPU while is muxed to drive the internal screen
- enabling the eGPU which also disables the dGPU, while muxed to
the internal screen
- switching the MUX to dGPU while the dGPU is disabled
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-7-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Check the ASUS_WMI_DEVID_EGPU_CONNECTED method for eGPU connection
before allowing the ASUS_WMI_DEVID_EGPU method to run.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-6-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Exposes the WMI method which tells if the eGPU is properly connected
on the devices that support it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-5-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adds support for fan curves defined for the middle fan which
is available on some ASUS ROG laptops.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-4-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some newer ASUS ROG laptops now have a middle/center fan in addition
to the CPU and GPU fans. This new fan typically blows across the
heatpipes and VRMs betweent eh CPU and GPU.
This commit exposes that fan to PWM control plus showing RPM.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Expose a WMI method in sysfs platform for showing which connected
charger the laptop is currently using.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement the similarities as GC v9.4.2, and the difference
for GC v9.4.3 HW spec, i.e. xcc instance.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On 32-bit architectures comparing a resource against a value larger than
U32_MAX can cause a warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
res->start > 0x100000000ull)
~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
As gcc does not warn about this in dead code, add an IS_ENABLED() check at
the start of the function. This will always return success but not actually resize
the BAR on 32-bit architectures without high memory, which is exactly what
we want here, as the driver can fall back to bank switching the VRAM
access.
Fixes: 31b8adab32 ("drm/amdgpu: require a root bus window above 4GB for BAR resize")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retry faults are delegated to soft IH ring and then processed by
deferred worker. Current soft IH ring size PAGE_SIZE can store 128
entries, which may overflow and drop retry faults, causes HW stucks
because the retry fault is not recovered.
Increase soft IH ring size to 8KB, enough to store 256 CAM entries
because we clear the CAM entry after handling the retry fault from soft
ring.
Define macro IH_RING_SIZE and IH_SW_RING_SIZE to remove duplicate
constant.
Show warning message if soft IH ring overflows with CAM enabled because
this should not happen.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rlc_init() is part of sw_init() so it should not touch hardware.
Additionally, calling the rlc update_spm_vmid() callback
directly invokes a gfx on/off cycle which could result in
powergating being enabled before hw init is complete. Split
update_spm_vmid() into an internal implementation for local
use without gfxoff interaction and then the rlc callback
which includes gfxoff handling.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a per-cpu array resizing use case and demonstrate how
bpf_get_smp_processor_id() can be used to directly access proper data
with no extra checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230711232400.1658562-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_get_smp_processor_id() helper returns current CPU on which BPF
program runs. It can't return value that is bigger than maximum allowed
number of CPUs (minus one, due to zero indexing). Teach BPF verifier to
recognize that. This makes it possible to use bpf_get_smp_processor_id()
result to index into arrays without extra checks, as demonstrated in
subsequent selftests/bpf patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230711232400.1658562-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
rlc_init() is part of sw_init() so it should not touch hardware.
Additionally, calling the rlc update_spm_vmid() callback
directly invokes a gfx on/off cycle which could result in
powergating being enabled before hw init is complete. Split
update_spm_vmid() into an internal implementation for local
use without gfxoff interaction and then the rlc callback
which includes gfxoff handling. lbpw_init also touches
hardware so mvoe that to rlc_resume as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change "gkc" to "gconfig" in 3 places since it is called "gconfig" and
not "gkc". Add a period at the end of one sentence.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>