[ Upstream commit 05457d9617 ]
This is needed so that the kernel can handle R_SPARC_UA64 relocations,
which is emitted by LLVM's IAS.
Signed-off-by: Koakuma <koachan@protonmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49a6c160ad ]
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf7154ffb1 ]
EEE speed down means speed down MAC MCU clock. It is not from spec.
It is kind of Realtek specific power saving feature. But enable it
may cause some issues, like packet drop or interrupt loss. Different
hardware may have different issues.
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed
down rate. The larger this value is, the more power can save. But it
actually save less power then we expected. And, as mentioned above,
will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0)
, which means not to speed down, to improve compatibility.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e9c5ffbb ]
Variable idx is set in the loop, but is never used resulting in dead
code. Building with GCC 16, which enables
-Werror=unused-but-set-parameter= by default results in build error.
This patch removes the idx parameter, since all the callers of the
fm10k_unbind_hw_stats_q as 0 as idx anyways.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f79d2f13d ]
In case that NAN is started, mark the device as non idle,
and set LED triggering similar to scan and ROC. Set the
device to idle once NAN is stopped.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.2711d62fce22.I9b9f826490e50967a66788d713b0eba985879873@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b5355b37 ]
The function ieee80211_sdata_from_skb() always returned the P2P Device
interface in case the skb was not associated with a netdev and didn't
consider the possibility that an NAN Device interface is also enabled.
To support configurations where both P2P Device and a NAN Device
interface are active, extend the function to match the correct
interface based on address 2 in the 802.11 MAC header.
Since the 'p2p_sdata' field in struct ieee80211_local is no longer
needed, remove it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.5252d2579a49.Id4576531c6b2ad83c9498b708dc0ade6b0214fa8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4402e8f39d ]
Bit 66 in the page group response descriptor used to be the LPIG (Last
Page in Group), but it was marked as Reserved since Specification 4.0.
Remove programming on this bit to make it consistent with the latest
specification.
Existing hardware all treats bit 66 of the page group response descriptor
as "ignored", therefore this change doesn't break any existing hardware.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250901053943.1708490-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487e8a8c34 ]
It appears that not all hardware/firmware implementations support
group key deletion correctly, which can lead to connection hangs
and deauthentication following GTK rekeying (delete and install).
To avoid this issue, instead of attempting to delete the key using
the special WMI_CIPHER_NONE value, we now replace the key with an
invalid (random) value.
This behavior has been observed with WCN39xx chipsets.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Closes: https://lore.kernel.org/all/DAWJQ2NIKY28.1XOG35E4A682G@linaro.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # QRB2210 RB1
Link: https://patch.msgid.link/20250902143225.837487-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75c02a0376 ]
snprintf() returns the number of bytes that would have been written, not
the number actually written. Using this for offset tracking can cause
buffer overruns if truncation occurs.
Replace snprintf() with scnprintf() to ensure the offset stays within
bounds.
Since scnprintf() never returns a negative value, and zero is not possible
in this context because 'bytes' starts at 0 and 'size - bytes' is
DEBUG_BUFFER_SIZE in the first call, which is large enough to hold the
string literals used, the return value is always positive. An integer
overflow is also completely out of reach here due to the small and fixed
buffer size. The error check in latency_show_one() is therefore
unnecessary. Remove it and make dmar_latency_snapshot() return void.
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250731225048.131364-1-ImanDevel@gmail.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa1a0e93ed ]
Allow mhi_sync_power_up to handle SYS_ERR during power-up, reboot,
or recovery. This is to avoid premature exit when MHI_PM_IN_ERROR_STATE is
observed during above mentioned system states.
To achieve this, treat SYS_ERR as a valid state and let its handler process
the error and queue the next transition to Mission Mode instead of aborting
early.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-5-fa2f6ccd301b@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6287982aa5 ]
LAN969x switchdev support depends on the SparX-5 core,so make it selectable
for ARCH_LAN969X.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250917110106.55219-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60f887b129 ]
When a PHY is halted (e.g. `ip link set dev lan2 down`), several
fields in struct phy_device may still reflect the last active
connection. This leads to ethtool showing stale values even though
the link is down.
Reset selected fields in _phy_state_machine() when transitioning
to PHY_HALTED and the link was previously up:
- speed/duplex -> UNKNOWN, but only in autoneg mode (in forced mode
these fields carry configuration, not status)
- master_slave_state -> UNKNOWN if previously supported
- mdix -> INVALID (state only, same meaning as "unknown")
- lp_advertising -> always cleared
The cleanup is skipped if the PHY is in PHY_ERROR state, so the
last values remain available for diagnostics.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250917094751.2101285-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9565c9d53c ]
Setting format to s16le is required for compressed playback on compatible
soundcards.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250911154340.2798304-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc9a8e238e ]
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb29fc32ae ]
Connect ioctl has the same memory for in and out parameters.
Copy in parameter (client uuid) to the local stack to avoid it be
overwritten by out parameters fill.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-3-alexander.usyskin@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 300b072df7 ]
The transaction manager initialization in txInit() was not properly
initializing TxBlock[0].waitor waitqueue, causing a crash when
txEnd(0) is called on read-only filesystems.
When a filesystem is mounted read-only, txBegin() returns tid=0 to
indicate no transaction. However, txEnd(0) still gets called and
tries to access TxBlock[0].waitor via tid_to_tblock(0), but this
waitqueue was never initialized because the initialization loop
started at index 1 instead of 0.
This causes a 'non-static key' lockdep warning and system crash:
INFO: trying to register non-static key in txEnd
Fix by ensuring all transaction blocks including TxBlock[0] have
their waitqueues properly initialized during txInit().
Reported-by: syzbot+c4f3462d8b2ad7977bea@syzkaller.appspotmail.com
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a5aa54fba ]
The inode mode loaded from corrupted disk can be invalid. Do like what
commit 0a9e740513 ("isofs: Verify inode mode when loading from disk")
does.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1aefee2e ]
These older chips now support the fw log traces via backing store
qcaps_v2. No other backing store memory types are supported besides
the fw trace types.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250917040839.1924698-6-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42f993d343 ]
Currently, all master upper netdevices (e.g., bond, VRF) are treated
equally.
When a VRF netdevice is used over an IPoIB netdevice, the expected
netdev resolution is on the lower IPoIB device which has the IP address
assigned to it and not the VRF device.
The rdma_cm module (CMA) tries to match incoming requests to a
particular netdevice. When successful, it also validates that the return
path points to the same device by performing a routing table lookup.
Currently, the former would resolve to the VRF netdevice, while the
latter to the correct lower IPoIB netdevice, leading to failure in
rdma_cm.
Improve this by ignoring the VRF master netdevice, if it exists, and
instead return the lower IPoIB device.
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250916111103.84069-5-edwards@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060842fed5 ]
Update Kconfig to add dependency on idpf module and
add IPU E2000 to the list of supported devices.
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20250827152545.2056-17-tatyana.e.nikolova@intel.com
Tested-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fba1eb39e ]
Add READ_ONCE() annotations because np->rxpmtu can be changed
while udpv6_recvmsg() and rawv6_recvmsg() read it.
Since this is a very rarely used feature, and that udpv6_recvmsg()
and rawv6_recvmsg() read np->rxopt anyway, change the test order
so that np->rxpmtu does not need to be in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250916160951.541279-4-edumazet@google.com
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 719de070f7 ]
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.
Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181
Tested-by: Nick Nielsen <nick.kainielsen@free.fr>
Tested-by: grm1 <grm1@mailbox.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc2a5a12fa ]
Logically before a waiting side which has already timed out turns the
atomic status back to idle, a completing side could still pass atomic
condition and call complete. It will make the following H2C commands,
waiting C2H events, get a completion unexpectedly early. Hence, renew
a completion for each H2C command waiting a C2H event.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065343.39023-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e156d2ab36 ]
The header v2 of ppdu status is optional, If it is not enabled, the RX
path must be obtained from IE00 or IE01. Append the IE00 part.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e79a5cc01 ]
The IE length of RTW89_PHYSTS_IE09_FTR_0 is dynamic, need to calculate
more to get it. This IE is not necessary now, disable it to avoid get
wrong IE length to let the parse function check failed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23361bd549 ]
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case.
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41cf11946b ]
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 368ed48a5e ]
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
Link: https://lore.kernel.org/CAO3ALPzdUkmMr0YMrODLeDSLZqNCkWcAP8NumuPHLjNJ8wC1kQ@mail.gmail.com
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/CAO3ALPxU5RzcoueC454L=WZ1qGMfAcnxm+T+p+9D8O9mcrUbCQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe91e078b6 ]
... allowing any ->lookup() return value to be passed to it.
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bf81856a4 ]
There is a timing race condition when a PRLI may be sent on the wire
before PLOGI_ACC in Point to Point topology. Fix by deferring REG_RPI
mbox completion handling to after PLOGI_ACC's CQE completion. Because
the discovery state machine only sends PRLI after REG_RPI mbox
completion, PRLI is now guaranteed to be sent after PLOGI_ACC.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-8-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5de09770b1 ]
To assist in debugging lpfc_xri_rebalancing driver parameter, a debugfs
entry is used. The debugfs file operations for xri rebalancing have
been previously implemented, but lack definition for its information
buffer size. Similar to other pre-existing debugfs entry buffers,
define LPFC_HDWQINFO_SIZE as 8192 bytes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-9-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4809b98eb ]
In lpfc_cleanup, there is an extraneous nlp_put for NPIV ports on the
F_Port_Ctrl ndlp object. In cases when an ABTS is issued, the
outstanding kref is needed for when a second XRI_ABORTED CQE is
received. The final kref for the ndlp is designed to be decremented in
lpfc_sli4_els_xri_aborted instead. Also, add a new log message to allow
for future diagnostics when debugging related issues.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-5-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f408dde246 ]
If lpfc_reset_flush_io_context fails to execute, then the wrong return
status code may be passed back to upper layers when issuing a target
reset TMF command. Fix by checking the return status from
lpfc_reset_flush_io_context() first in order to properly return FAILED
or FAST_IO_FAIL.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-7-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5bf6d681f ]
The kref for Fabric_DID ndlps is not decremented after repeated FDISC
failures and exhausting maximum allowed retries. This can leave the
ndlp lingering unnecessarily. Add a test and set bit operation for the
NLP_DROPPED flag. If not previously set, then a kref is decremented. The
ndlp is freed when the remaining reference for the completing ELS is
put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-6-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 803dfd83df ]
lpfc_sli4_queue_setup() does not allocate memory and is used for
submitting CREATE_QUEUE mailbox commands. Thus, if such mailbox
commands fail we should clean up by also freeing the memory allocated
for the queues with lpfc_sli4_queue_destroy(). Change the intended
clean up label for the lpfc_sli4_queue_setup() error case to
out_destroy_queue.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-4-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb1f456834 ]
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3f7457da7 ]
The selftests 'make clean' does not clean the net/lib because it only
processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves
compiled objects in net/lib after cleaning, requiring manual cleanup.
Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib
dependency is properly cleaned.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7ddcf921e ]
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b09b11805 ]
Due to multiple explosion issues in the early days of the Xe driver,
the GuC load was hacked to never return a failure. That prevented
kernel panics and such initially, but now all it achieves is creating
more confusing errors when the driver tries to submit commands to a
GuC it already knows is not there. So fix that up.
As a stop-gap and to help with debug of load failures due to invalid
GuC init params, a wedge call had been added to the inner GuC load
function. The reason being that it leaves the GuC log accessible via
debugfs. However, for an end user, simply aborting the module load is
much cleaner than wedging and trying to continue. The wedge blocks
user submissions but it seems that various bits of the driver itself
still try to submit to a dead GuC and lots of subsequent errors occur.
And with regards to developers debugging why their particular code
change is being rejected by the GuC, it is trivial to either add the
wedge back in and hack the return code to zero again or to just do a
GuC log dump to dmesg.
v2: Add support for error injection testing and drop the now redundant
wedge call.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250909224132.536320-1-John.C.Harrison@Intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d99aa4ed7 ]
In nested arrays don't require that the intermediate attribute
type should be a valid attribute type, it might just be zero
or an incrementing index, it is often not even used.
See include/net/netlink.h about NLA_NESTED_ARRAY:
> The difference to NLA_NESTED is the structure:
> NLA_NESTED has the nested attributes directly inside
> while an array has the nested attributes at another
> level down and the attribute types directly in the
> nesting don't matter.
Example based on include/uapi/linux/wireguard.h:
> WGDEVICE_A_PEERS: NLA_NESTED
> 0: NLA_NESTED
> WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
> [..]
> 0: NLA_NESTED
> ...
> ...
Previous the check required that the nested type was valid
in the parent attribute set, which in this case resolves to
WGDEVICE_A_UNSPEC, which is YNL_PT_REJECT, and it took the
early exit and returned YNL_PARSE_CB_ERROR.
This patch renames the old nl_attr_validate() to
__nl_attr_validate(), and creates a new inline function
nl_attr_validate() to mimic the old one.
The new __nl_attr_validate() takes the attribute type as an
argument, so we can use it to validate attributes of a
nested attribute, in the context of the parents attribute
type, which in the above case is generated as:
[WGDEVICE_A_PEERS] = {
.name = "peers",
.type = YNL_PT_NEST,
.nest = &wireguard_wgpeer_nest,
},
__nl_attr_validate() only checks if the attribute length
is plausible for a given attribute type, so the .nest in
the above example is not used.
As the new inline function needs to be defined after
ynl_attr_type(), then the definitions are moved down,
so we avoid a forward declaration of ynl_attr_type().
Some other examples are NL80211_BAND_ATTR_FREQS (nest) and
NL80211_ATTR_SUPPORTED_COMMANDS (u32) both in nl80211-user.c
$ make -C tools/net/ynl/generated nl80211-user.c
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-7-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4404f6af81 ]
As netif_queue_set_napi checks napi->dev, if it doesn't have it and
it will warn_on and return. So we should use netif_napi_add before
netif_queue_set_napi because netif_napi_add has "napi->dev = dev".
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/a17a5a087350eaf2e081dcd879779ca2c69b0908.1757653621.git.zhuyikai1@h-partners.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d62beb102 ]
Dell systems utilize an EC-based touchpad emulation when the ACPI
touchpad _DSM is not invoked. This emulation acts as a secondary
master on the I2C bus, designed for scenarios where the I2C touchpad
driver is absent, such as in BIOS menus. Typically, loading the
i2c-hid module triggers the _DSM at initialization, disabling the
EC-based emulation.
However, if the i2c-hid module is missing from the boot kernel
used for hibernation snapshot restoration, the _DSM remains
uncalled, resulting in dual masters on the I2C bus and
subsequent arbitration errors. This issue arises when i2c-hid
resides in the rootfs instead of the kernel or initramfs.
To address this, switch from using the SYSTEM_SLEEP_PM_OPS()
macro to dedicated callbacks, introducing a specific
callback for restoring the S4 image. This callback ensures
the _DSM is invoked.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1553fc105 ]
Currently, the UFS lane clocks remain enabled even after the link enters
the Hibern8 state and are only disabled during runtime/system
suspend.This patch modifies the behavior to disable the lane clocks
during ufs_qcom_setup_clocks(), which is invoked shortly after the link
enters Hibern8 via gate work.
While hibern8_notify() offers immediate control, toggling clocks on
every transition isn't ideal due to varied contexts like clock scaling.
Since setup_clocks() manages PHY/controller resources and is invoked
soon after Hibern8 entry, it serves as a central and stable point for
clock gating.
Signed-off-by: Palash Kambar <quic_pkambar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909055149.2068737-1-quic_pkambar@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2d3f529e7 ]
A lot of modern SoC have the ability to store MAC addresses in their
NVMEM. So extend the generic function device_get_mac_address() to
obtain the MAC address from an nvmem cell named 'mac-address' in
case there is no firmware node which contains the MAC address directly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250912140332.35395-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b52167a0 ]
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250912161703.361272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0915cb2245 ]
Clear EEE runtime flags when the PHY transitions to HALTED or ERROR
and the state machine drops the link. This avoids stale EEE state being
reported via ethtool after the PHY is stopped or hits an error.
This change intentionally only clears software runtime flags and avoids
MDIO accesses in HALTED/ERROR. A follow-up patch will address other
link state variables.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250912132000.1598234-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c97a7dccb3 ]
dml21_map_dc_state_into_dml_display_cfg calls (the call is usually
inlined by the compiler) populate_dml21_surface_config_from_plane_state
and populate_dml21_plane_config_from_plane_state which may use FPU. In
a x86-64 build:
$ objdump --disassemble=dml21_map_dc_state_into_dml_display_cfg \
> drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.o |
> grep %xmm -c
63
Thus it needs to be guarded with DC_FP_START. But we must note that the
current code quality of the in-kernel FPU use in AMD dml2 is very much
problematic: we are actually calling DC_FP_START in dml21_wrapper.c
here, and this translation unit is built with CC_FLAGS_FPU. Strictly
speaking this does not make any sense: with CC_FLAGS_FPU the compiler is
allowed to generate FPU uses anywhere in the translated code, perhaps
out of the DC_FP_START guard. This problematic pattern also occurs in
at least dml2_wrapper.c, dcn35_fpu.c, and dcn351_fpu.c. Thus we really
need a careful audit and refactor for the in-kernel FPU uses, and this
patch is simply whacking a mole. However per the reporter, whacking
this mole is enough to make a 9060XT "just work."
Reported-by: Asiacn <710187964@qq.com>
Closes: https://github.com/loongson-community/discussions/issues/102
Tested-by: Asiacn <710187964@qq.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043c87d7d5 ]
DCE 6 was not advertised as being able to support VRR,
so let's mark it as unsupported for now.
The VRR implementation in amdgpu_dm depends on the VUPDATE
interrupt which is not registered for DCE 6.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 489f0f600c ]
When the EDID has the HDMI bit, we should simply select
the HDMI signal type even on DVI ports.
For reference see, the legacy amdgpu display code:
amdgpu_atombios_encoder_get_encoder_mode
which selects ATOM_ENCODER_MODE_HDMI for the same case.
This commit fixes DVI connectors to work with DVI-D/HDMI
adapters so that they can now produce output over these
connectors for HDMI monitors with higher bandwidth modes.
With this change, even HDMI audio works through DVI.
For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter
with the following GPUs:
Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI
Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
