'interrupt-parent' is never required as it can be in a parent node or a
parent node itself can be an interrupt provider. Where exactly it lives is
outside the scope of a binding schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org
The '/bits/ 8' notation applies the next <> list of values. Another <> list
is encoded as 32-bits by default. IOW, each <> list needs to be preceeded
with '/bits/ 8'.
While the dts format allows this, as a rule we don't mix sizes for DT
properties since all size information is lost in the dtb file.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107030419.2380198-1-robh@kernel.org
Each independent example should be a separate entry. This allows for
'interrupts' to have different cell sizes.
The first example also has a phandle in 'interrupts', so drop the phandle.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-8-robh@kernel.org
The schemas for MDIO bus nodes range from missing to duplicating
everything in mdio.yaml. The MDIO bus node schemas only need to
reference mdio.yaml, define any binding specific properties, and define
'unevaluatedProperties: false'. This ensures that MDIO nodes only
contain defined properties. With this, any duplicated properties can
be removed.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "Fernández Rojas" <noltari@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220105151009.3093506-1-robh@kernel.org
env->scratched_stack_slots is a 64-bit value, we should use ULL
instead of UL literal values.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christy Lee <christylee@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220108005854.658596-1-christylee@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This series provides KCSAN fixes and also the ability to take memory
barriers into account for weakly-ordered systems. This last can increase
the probability of detecting certain types of data races.
-----BEGIN PGP SIGNATURE-----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=Q5fg
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
Add a check to the xdp_link selftest that the kernel rejects replacing an
XDP program with a different program type on link update.
v2:
- Split this out into its own patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the selftest to use the preferred ASSERT_* macros instead of the
deprecated CHECK().
v2:
- Don't add if statements around checks if they weren't there before.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.
Fix this by adding a check and bailing out if the types don't match.
Fixes: 026a4c28e1 ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: syzbot+983941aa85af6ded1fd9@syzkaller.appspotmail.com
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This series contains documentation and litmus tests for locking, courtesy
of Boqun Feng.
-----BEGIN PGP SIGNATURE-----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=3YsU
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model documentation updates from Paul McKenney:
"This series contains documentation and litmus tests for locking,
courtesy of Boqun Feng"
* tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: litmus: Add two tests for unlock(A)+lock(B) ordering
tools/memory-model: doc: Describe the requirement of the litmus-tests directory
tools/memory-model: Provide extra ordering for unlock+lock pair on the same CPU
This pull request contains the following branches:
doc.2021.11.30c: Documentation updates, perhaps most notably Neil Brown's
writeup of the reference-counting analogy to RCU.
exp.2021.12.07a: Expedited grace-period cleanups.
fastnohz.2021.11.30c: Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid
users. I have asked around, posted a blog entry, and sent this
series to LKML without result.
fixes.2021.11.30c: Miscellaneous fixes.
nocb.2021.12.09a: RCU callback offloading updates, perhaps most notably
Frederic Weisbecker's updates allowing CPUs booted in the
de-offloaded state to be offloaded at runtime.
nolibc.2021.11.30c: nolibc fixes from Willy Tarreau and Anmar Faizi, but
also including Mark Brown's addition of gettid().
tasks.2021.12.09a: RCU Tasks Trace fixes, including changes that increase
the scalability of call_rcu_tasks_trace() for the BPF folks
(Martin Lau and KP Singh).
torture.2021.12.07a: Various fixes including those from Wander Lairson
Costa and Li Zhijian.
torturescript.2021.11.30c: Fixes plus addition of tests for the increased
call_rcu_tasks_trace() scalability.
-----BEGIN PGP SIGNATURE-----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=K6AN
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates, perhaps most notably Neil Brown's writeup of
the reference-counting analogy to RCU.
- Expedited grace-period cleanups.
- Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
around, posted a blog entry, and sent this series to LKML without
result.
- Miscellaneous fixes.
- RCU callback offloading updates, perhaps most notably Frederic
Weisbecker's updates allowing CPUs booted in the de-offloaded state
to be offloaded at runtime.
- nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
Mark Brown's addition of gettid().
- RCU Tasks Trace fixes, including changes that increase the
scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
and KP Singh).
- Various fixes including those from Wander Lairson Costa and Li
Zhijian.
- Fixes plus addition of tests for the increased call_rcu_tasks_trace()
scalability.
* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
rcu/nocb: Optimize kthreads and rdp initialization
rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
rcu-tasks: Use fewer callbacks queues if callback flood ends
rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
rcu-tasks: Use more callback queues if contention encountered
rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
rcu-tasks: Abstract invocations of callbacks
rcu-tasks: Abstract checking of callback lists
rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
rcu-tasks: Inspect stalled task's trc state in locked state
rcu-tasks: Use spin_lock_rcu_node() and friends
rcutorture: Combine n_max_cbs from all kthreads in a callback flood
...
-----BEGIN PGP SIGNATURE-----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=k1A+
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Remove some twists in the console registration code. It does not
change the existing behavior except for one corner case. The proper
default console (with tty binding) will be registered again even when
it has been removed in the meantime. It is actually a bug fix.
Anyway, this modified behavior requires some manual interaction.
- Optimize gdb extension for huge ring buffers.
- Do not use atomic operations for a local bitmap variable.
- Update git links in MAINTAINERS.
* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
MAINTAIERS/printk: Add link to printk git
MAINTAINERS/vsprintf: Update link to printk git tree
scripts/gdb: lx-dmesg: read records individually
printk/console: Clean up boot console handling in register_console()
printk/console: Remove need_default_console variable
printk/console: Remove unnecessary need_default_console manipulation
printk/console: Rename has_preferred_console to need_default_console
printk/console: Split out code that enables default console
vsprintf: Use non-atomic bitmap API when applicable
Pull workqueue updates from Tejun Heo:
- The code around workqueue scheduler hooks got reorganized early 2019
which unfortuately introdued a couple subtle and rare race conditions
where preemption can mangle internal workqueue state triggering a
WARN and possibly causing a stall or at least delay in execution.
Frederic fixed both early December and the fixes were sitting in
for-5.16-fixes which I forgot to push. They are here now. I'll
forward them to stable after they land.
- The scheduler hook reorganization has more implicatoins for workqueue
code in that the hooks are now more strictly synchronized and thus
the interacting operations can become more straight-forward.
Lai is in the process of simplifying workqueue code and this pull
request contains some of the patches.
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Remove the cacheline_aligned for nr_running
workqueue: Move the code of waking a worker up in unbind_workers()
workqueue: Remove schedule() in unbind_workers()
workqueue: Remove outdated comment about exceptional workers in unbind_workers()
workqueue: Remove the advanced kicking of the idle workers in rebind_workers()
workqueue: Remove the outdated comment before wq_worker_sleeping()
workqueue: Fix unbind_workers() VS wq_worker_sleeping() race
workqueue: Fix unbind_workers() VS wq_worker_running() race
workqueue: Upgrade queue_work_on() comment
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. The only two noticeable changes are a subtle
cpuset behavior fix and trace event id field being expanded to u64
from int. Most others are code cleanups"
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: convert 'allowed' in __cpuset_node_allowed() to be boolean
cgroup/rstat: check updated_next only for root
cgroup: rstat: explicitly put loop variant in while
cgroup: return early if it is already on preloaded list
cgroup/cpuset: Don't let child cpusets restrict parent in default hierarchy
cgroup: Trace event cgroup id fields should be u64
cgroup: fix a typo in comment
cgroup: get the wrong css for css_alloc() during cgroup_init_subsys()
cgroup: rstat: Mark benign data race to silence KCSAN
A task can end up indefinitely sleeping in do_select() ->
poll_schedule_timeout() when the following race happens:
TASK1 (thread1) TASK2 TASK1 (thread2)
do_select()
setup poll_wqueues table
with 'fd'
write data to 'fd'
pollwake()
table->triggered = 1
closes 'fd' thread1 is
waiting for
poll_schedule_timeout()
- sees table->triggered
table->triggered = 0
return -EINTR
loop back in do_select()
But at this point when TASK1 loops back, the fdget() in the setup of
poll_wqueues fails. So now so we never find 'fd' is ready for reading
and sleep in poll_schedule_timeout() indefinitely.
Treat an fd that got closed as a fd on which some event happened. This
makes sure cannot block indefinitely in do_select().
Another option would be to return -EBADF in this case but that has a
potential of subtly breaking applications that excercise this behavior
and it happens to work for them. So returning fd as active seems like a
safer choice.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some devices have an erratum such that they only support DWORD accesses to
some registers. E.g., this Bayhub O2 device ([VID:DID] = [0x1217:0x8621])
only supports DWORD accesses to LTR latency registers and L1 PM substates
control registers:
https://github.com/rajatxjain/public_shared/blob/main/OZ711LV2_appnote.pdf
The L1 PM substate control registers are DWORD sized, and hence their
access in the kernel is already DWORD sized, so we don't need to do
anything for them.
However, the LTR registers being WORD sized, are in need of a solution.
Convert the WORD sized accesses to these registers into DWORD sized
accesses while saving and restoring them.
Link: https://lore.kernel.org/r/20211222012105.3438916-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If we encounter an error after the kfree(acpi_hw_cfg); then the goto
err; will result in a double free.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111072232.GG11243@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before this patch, glock dumps would not dump the gl_object for iopen
glocks. This information can help us debug problems related to eviction:
when AN iopen glock is blocked we can see the status of its underlying
inode and its flags, etc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If table->serial_port.access_width is more than 29, it causes
undefined behavior when ACPI_ACCESS_BIT_WIDTH shifts it to
(1 << ((size) + 2)):
[ 0.000000] UBSAN: Undefined behaviour in drivers/acpi/spcr.c:114:11
[ 0.000000] shift exponent 102 is too large for 32-bit type 'int'
Use the new ACPI_ACCESS_ defines to test that serial_port.access_width
is less than 30 and set it to 6 if it is not.
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Actual hardware state of CRTC is controlled by the member 'active' in
struct drm_crtc_state instead of the member 'enable', according to the
kernel doc of the member 'enable'. In fact, the drm client modeset
and atomic helpers are using the member 'active' to do the control.
Referencing the member 'enable' of new_crtc_state, the function
crtc_needs_disable() may fail to reflect if CRTC needs disable in
self refresh mode, e.g., when the framebuffer emulation will be blanked
through the client modeset helper with the next commit, the member
'enable' of new_crtc_state is still true while the member 'active' is
false, hence the relevant potential encoder and bridges won't be disabled.
So, let's check new_crtc_state->active to determine if CRTC needs disable
in self refresh mode instead of new_crtc_state->enable.
Fixes: 1452c25b0e ("drm: Add helpers to kick off self refresh mode in drivers")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230040626.646807-1-victor.liu@nxp.com
Because devres_alloc() may fail, devm_ioremap() may return NULL.
Then, 'clk_data->base' will be assigned to clkdev->data->base in
platform_device_register_data().
The PTR_ERR_OR_ZERO() check on clk_data does not cover 'base', so
it is better to add an explicit check against NULL after updating
it.
Fixes: 3f4ba94e36 ("ACPI: APD: Add AMD misc clock handler support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its
Expansion ROM unless both the Memory Space Enable and the Expansion ROM
Enable bit are set. But apparently some Intel I210 NICs don't work
correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is
disabled.
Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot
v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at
all:
BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M]
BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K]
ROM: 0x40200000 (disabled) [size=1M]
NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
igb 0002:01:00.0 enP2p1s0: Reset adapter
Previously, pci_std_update_resource() wrote the assigned ROM address to the
BAR only when the ROM was enabled. This meant that the I210 ROM BAR could
be left with an address assigned by firmware, which might overlap with
other BARs.
Quirk these I210 devices so pci_std_update_resource() always writes the
assigned address to the ROM BAR, whether or not the ROM is enabled.
Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas
Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some BIOS-es contain a bug where they add addresses which map to system
RAM in the PCI host bridge window returned by the ACPI _CRS method, see
commit 4dc2287c18 ("x86: avoid E820 regions when allocating address
space").
To work around this bug Linux excludes E820 reserved addresses when
allocating addresses from the PCI host bridge window since 2010.
Recently (2019) some systems have shown-up with E820 reservations which
cover the entire _CRS returned PCI bridge memory window, causing all
attempts to assign memory to PCI BARs which have not been setup by the
BIOS to fail. For example here are the relevant dmesg bits from a
Lenovo IdeaPad 3 15IIL 81WE:
[mem 0x000000004bc50000-0x00000000cfffffff] reserved
pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
The ACPI specifications appear to allow this new behavior:
The relationship between E820 and ACPI _CRS is not really very clear.
ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means:
This range of addresses is in use or reserved by the system and is
not to be included in the allocatable memory pool of the operating
system's memory manager.
and it may be used when:
The address range is in use by a memory-mapped system device.
Furthermore, sec 15.2 says:
Address ranges defined for baseboard memory-mapped I/O devices, such
as APICs, are returned as reserved.
A PCI host bridge qualifies as a baseboard memory-mapped I/O device,
and its apertures are in use and certainly should not be included in
the general allocatable pool, so the fact that some BIOS-es reports
the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug.
So it seems that the excluding of E820 reserved addresses is a mistake.
Ideally Linux would fully stop excluding E820 reserved addresses,
but then the old systems this was added for will regress.
Instead keep the old behavior for old systems, while ignoring
the E820 reservations for any systems from now on.
Old systems are defined here as BIOS year < 2018, this was chosen to make
sure that E820 reservations will not be used on the currently affected
systems, while at the same time also taking into account that the systems
for which the E820 checking was originally added may have received BIOS
updates for quite a while (esp. CVE related ones), giving them a more
recent BIOS year then 2010.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793
BugLink: https://bugs.launchpad.net/bugs/1878279
BugLink: https://bugs.launchpad.net/bugs/1931715
BugLink: https://bugs.launchpad.net/bugs/1932069
BugLink: https://bugs.launchpad.net/bugs/1921649
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 81424d0ad0 ("MIPS: ath79: Use the reset controller to restart
OF machines") removed setup of _machine_restart on OF machines to use
reset handler in reset controller driver.
While removing remnants of non-OF machines in commit 3a77e0d75e
("MIPS: ath79: drop machfiles"), this was introduced again, making it
impossible to use additional restart handlers registered through device
tree. Drop setting _machine_restart altogether, and ath79_restart
function, which is no longer used after this.
Fixes: 3a77e0d75e ("MIPS: ath79: drop machfiles")
Cc: John Crispin <john@phrozen.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Qemu currently supports up to 16 CPUs, so increase the default from 4 to 16.
Bload-o-meter shows only an increase of 800 bytes with this change.
Signed-off-by: Helge Deller <deller@gmx.de>
With CONFIG_KALLSYMS_ALL=y, the function is_ksym_addr() is used to
determine if a symbol is from inside the kernel range. For that the
given symbol address is checked if it's inside the _stext to _end range.
Although this is correct, some architectures (e.g. parisc) may have the
init area before the _stext address and as such the check in
is_ksym_addr() fails. By extending the range check to include the init
section, __is_kernel() will now detect symbols in this range as well.
This fixes an issue on parisc where addresses of kernel functions in
init sections aren't resolved to their symbol names.
Signed-off-by: Helge Deller <deller@gmx.de>
No need to have an own hpmc_stack. Just re-use the toc_stack of the
monarch CPU as either a TOC or a HPMC will happen at the same time.
This reduces the kernel memory footprint by 16k.
Signed-off-by: Helge Deller <deller@gmx.de>
Before this patch, the TOC code used a pre-allocated stack of 16kb for
each possible CPU. That space overhead was the reason why the TOC
feature wasn't enabled by default for 32-bit kernels.
This patch rewrites the TOC code to use a per-cpu stack. That way we use
much less memory now and as such we enable the TOC feature by default on
all kernels.
Additionally the dump of the registers and the stacktrace wasn't
serialized, which led to multiple CPUs printing the stack backtrace at
once which rendered the output unreadable.
Now the backtraces are nicely serialized by a lock.
Signed-off-by: Helge Deller <deller@gmx.de>
The current brcmstb driver works for Arm and Arm64. A few things are
modified here for us to support MIPs as well.
o There are four outbound range register groups and each directs a window
of up to 128MB. Even though there are four 128MB DT "ranges" in the
bmips PCIe DT node, these ranges are contiguous and are collapsed into
a single range by the OF range parser. Now the driver assumes a single
range -- for MIPs only -- and splits it back into 128MB sizes.
o For bcm7425, the config space accesses must be 32-bit reads or
writes. In addition, the 4k config space register array is missing
and not used.
o The registers for the upper 32-bits of the outbound window address do
not exist.
o Burst size must be set to 256 (this refers to an internal bus).
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The code in 'arch/mips/bmips/dma.c' performed DMA mapping for inbound
regions. This mapping was and is required for the Broadcom STB PCIe
controller HW. This code is removed as the current 'struct device' has a
@dma_range_map field which performs the same functionality by processing
the "dma-ranges" DT property.
Subsequently, ARCH_HAS_PHYS_TO_DMA is now unset since the dma_to_phys()
and phys_to_dma() functions are removed.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
For Broadcom STB PCIe HW. The 7425 and 7435 are MIPs-based SOCs. Not much
difference between the two for the DT properties except that they have
slightly different PCIe interrupt assignments.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The Broadcom STB Arm and MIPs SOCs use the same PCIe controller
HW, although the MIPs version is older.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 9bf3797796 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107083633.20843-1-linmq006@gmail.com
We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4 ("vfs: Convert bpf to use the new mount API").
In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:
- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)
The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.
After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
Fixes: d2935de7e4 ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
The helper gets registered as 'netbios-ns', not netbios_ns.
Intentionally not adding a fixes-tag because i don't want this to go to
stable. This wasn't noticed for a very long time so no so no need to risk
regressions.
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Here are the GNSS updates for 5.17-rc1, including:
- support for GNSS receivers with USB interface
- support for Sierra Wireless XM1210
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYdxJjQAKCRALxc3C7H1l
CMSxAQCP3UVqHxIBtBlHpQSAQ3PgNCYxAriBiPOweBHX819sgQD/XKiXJywrmXFZ
oUW/1C7PYz/ntW1YTHAaQY6OW7g1PA8=
=rY4F
-----END PGP SIGNATURE-----
Merge tag 'gnss-5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-next
Johan writes:
GNSS updates for 5.17-rc1
Here are the GNSS updates for 5.17-rc1, including:
- support for GNSS receivers with USB interface
- support for Sierra Wireless XM1210
All have been in linux-next with no reported issues.
* tag 'gnss-5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: usb: add support for Sierra Wireless XM1210
gnss: add USB support
gnss: drop stray semicolons
Reading from a file that was just extended by a write, but the write had
not yet reached the server would return ENODATA as illustrated by this
command:
$ xfs_io -c 'open -ft test' -c 'w 4096 1000' -c 'r 0 1000'
wrote 1000/1000 bytes at offset 4096
1000.000000 bytes, 1 ops; 0.0001 sec (5.610 MiB/sec and 5882.3529 ops/sec)
pread: No data available
Fix this case by having netfs assume zeroes when reads from server come
short like AFS and CEPH do
Link: https://lkml.kernel.org/r/20220110111444.926753-1-asmadeus@codewreck.org
Cc: stable@vger.kernel.org
Fixes: eb497943fa ("9p: Convert to using the netfs helper lib to do reads and caching")
Co-authored-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This reverts commit 6bf950a8ff.
To align with other vendors, NET_VENDOR configs are supposed to be ON by
default, while their drivers should default to OFF.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220110205246.66298-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This should check for NULL in case memory allocation fails.
Reported-by: Julian Wiedmann <jwiedmann.dev@gmail.com>
Fixes: 3b9e2ea6c1 ("netfilter: nft_limit: move stateful fields out of expression data")
Fixes: 37f319f37d ("netfilter: nft_connlimit: move stateful fields out of expression data")
Fixes: 33a24de37e ("netfilter: nft_last: move stateful fields out of expression data")
Fixes: ed0a0c60f0 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20220110194817.53481-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Remove device_add_properties() which does not work correctly if
software nodes holding additional device properties are shared
or reused (Heikki Krogerus).
- Fix nargs_prop property handling for software nodes (Clément Léger).
- Update documentation of ACPI device properties (Sakari Ailus).
- Update the handling of graph properties in the generic framework
to match the DT case (Sakari Ailus).
- Update software nodes entry in MAINTAINERS (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=/oIe
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These update the handling of software nodes and graph properties, and
the MAINTAINERS entry for the former.
Specifics:
- Remove device_add_properties() which does not work correctly if
software nodes holding additional device properties are shared or
reused (Heikki Krogerus).
- Fix nargs_prop property handling for software nodes (Clément
Léger).
- Update documentation of ACPI device properties (Sakari Ailus).
- Update the handling of graph properties in the generic framework to
match the DT case (Sakari Ailus).
- Update software nodes entry in MAINTAINERS (Andy Shevchenko)"
* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: Update MAINTAINERS data base
software node: fix wrong node passed to find nargs_prop
device property: Drop fwnode_graph_get_remote_node()
device property: Use fwnode_graph_for_each_endpoint() macro
device property: Implement fwnode_graph_get_endpoint_count()
Documentation: ACPI: Update references
Documentation: ACPI: Fix data node reference documentation
device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
device property: Fix fwnode_graph_devcon_match() fwnode leak
device property: Remove device_add_properties() API
driver core: Don't call device_remove_properties() from device_del()
PCI: Convert to device_create_managed_software_node()
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping).
-----BEGIN PGP SIGNATURE-----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=Crok
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a new driver for Renesas RZ/G2L TSU, update a few existing
thermal control drivers and clean up the tmon utility.
Specifics:
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping)"
* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/int340x: Fix RFIM mailbox write commands
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
thermal: tools: tmon: remove unneeded local variable
thermal: int340x: Use struct_group() for memcpy() region
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano).
-----BEGIN PGP SIGNATURE-----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=1egI
-----END PGP SIGNATURE-----
Merge tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
* iASL/Disassembler: Additional support for NHLT table (Bob Moore).
* Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
* Fix a couple of warnings under MSVC (Bob Moore).
* iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
* iASL/NHLT table: "Specific Data" field support (Bob Moore).
* Use original data_table_region pointer for accesses (Jessica
Clarke).
* Use original pointer for virtual origin tables (Jessica Clarke).
* Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
* Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
* iASL: Add suppport for AGDI table (Ilkka Koskinen).
* Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
* Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
* Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
* Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
* Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
* Fix wrong interpretation of PCC address (Sudeep Holla).
* Add support for PCC Opregion special context data (Sudeep Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh).
-----BEGIN PGP SIGNATURE-----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=IGwJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are usual ACPICA code updates (although there are more of them
than in the last few releases), a noticeable EC driver update (which
mostly consists of cleanups, though), the device enumeration quirks
handling rework from Hans, some updates eliminating unnecessary CPU
cache flushing in some places (processor idle and system-wide PM code)
and a bunch of assorted cleanups and fixes.
Specifics:
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
- iASL/Disassembler: Additional support for NHLT table (Bob
Moore).
- Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
- Fix a couple of warnings under MSVC (Bob Moore).
- iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
- iASL/NHLT table: "Specific Data" field support (Bob Moore).
- Use original data_table_region pointer for accesses (Jessica
Clarke).
- Use original pointer for virtual origin tables (Jessica Clarke).
- Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
- Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
- iASL: Add suppport for AGDI table (Ilkka Koskinen).
- Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
- Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
- Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
- Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
- Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
- Fix wrong interpretation of PCC address (Sudeep Holla).
- Add support for PCC Opregion special context data (Sudeep
Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system PM
transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
Li).
- Rework flushing of EC work while suspended to idle and clean up the
handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used when
the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh)"
* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
ACPI: processor: thermal: avoid cpufreq_get_policy()
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
ACPI: battery: Add the ThinkPad "Not Charging" quirk
ACPI: sysfs: use default_groups in kobj_type
ACPICA: Update version to 20211217
ACPICA: iASL/NHLT table: "Specific Data" field support
ACPICA: iASL: Add suppport for AGDI table
ACPICA: iASL: Add TDEL table to both compiler/disassembler
ACPICA: Fixed a couple of warnings under MSVC
ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
ACPICA: Add support for PCC Opregion special context data
ACPICA: Fix wrong interpretation of PCC address
...
