Commit graph

766,491 commits

Author SHA1 Message Date
Tom Levens
7de859fcf9 hwmon: (ltc2990) add devicetree binding
Add a devicetree binding for the ltc2990 hwmon driver.

Signed-off-by: Tom Levens <tom.levens@cern.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:52:00 -07:00
Tom Levens
a6282d1703 hwmon: (ltc2990) Fix incorrect conversion of negative temperatures
Fix incorrect conversion of negative temperatures by using
sign_extend32() instead of a home-grown conversion function.

Fixes: df92270357 ("hwmon: Add LTC2990 sensor driver")
Signed-off-by: Tom Levens <tom.levens@cern.ch>
[groeck: Updated subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:52:00 -07:00
Lucas Magasweran
59df4f4e8e hwmon: (core) check parent dev != NULL when chip != NULL
hwmon_device_register_with_info() registration API requires a
non-NULL parent device when chip is non-NULL.

This commit adds a check and documents this requirement.

Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:51:59 -07:00
Wolfram Sang
2b2acdc889 hwmon: (fschmd) fix typo 'can by' to 'can be'
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:51:59 -07:00
Guenter Roeck
f934c0599e hwmon: (k10temp) Display both Tctl and Tdie
On some AMD CPUs, there is a different between the die temperature
(Tdie) and the reported temperature (Tctl). Tdie is the real measured
temperature, and Tctl is used for fan control. Lets report both for
affected CPUs.

Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:51:58 -07:00
Guenter Roeck
ccaf63b4d6 hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUs
Add support for Stoney Ridge and Bristol Ridge (Family 15h Model 0x70)
CPUs. Registers match those of Family 15h Model 0x60.

Cc: stable@vger.kernel.org # v4.16+
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:51:57 -07:00
Jens Axboe
68fa9dbe08 nvme-pci: fix race between poll and IRQ completions
If polling completions are racing with the IRQ triggered by a
completion, the IRQ handler will find no work and return IRQ_NONE.
This can trigger complaints about spurious interrupts:

[  560.169153] irq 630: nobody cared (try booting with the "irqpoll" option)
[  560.175988] CPU: 40 PID: 0 Comm: swapper/40 Not tainted 4.17.0-rc2+ #65
[  560.175990] Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.00.01.0010.010920180151 01/09/2018
[  560.175991] Call Trace:
[  560.175994]  <IRQ>
[  560.176005]  dump_stack+0x5c/0x7b
[  560.176010]  __report_bad_irq+0x30/0xc0
[  560.176013]  note_interrupt+0x235/0x280
[  560.176020]  handle_irq_event_percpu+0x51/0x70
[  560.176023]  handle_irq_event+0x27/0x50
[  560.176026]  handle_edge_irq+0x6d/0x180
[  560.176031]  handle_irq+0xa5/0x110
[  560.176036]  do_IRQ+0x41/0xc0
[  560.176042]  common_interrupt+0xf/0xf
[  560.176043]  </IRQ>
[  560.176050] RIP: 0010:cpuidle_enter_state+0x9b/0x2b0
[  560.176052] RSP: 0018:ffffa0ed4659fe98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[  560.176055] RAX: ffff9527beb20a80 RBX: 000000826caee491 RCX: 000000000000001f
[  560.176056] RDX: 000000826caee491 RSI: 00000000335206ee RDI: 0000000000000000
[  560.176057] RBP: 0000000000000001 R08: 00000000ffffffff R09: 0000000000000008
[  560.176059] R10: ffffa0ed4659fe78 R11: 0000000000000001 R12: ffff9527beb29358
[  560.176060] R13: ffffffffa235d4b8 R14: 0000000000000000 R15: 000000826caed593
[  560.176065]  ? cpuidle_enter_state+0x8b/0x2b0
[  560.176071]  do_idle+0x1f4/0x260
[  560.176075]  cpu_startup_entry+0x6f/0x80
[  560.176080]  start_secondary+0x184/0x1d0
[  560.176085]  secondary_startup_64+0xa5/0xb0
[  560.176088] handlers:
[  560.178387] [<00000000efb612be>] nvme_irq [nvme]
[  560.183019] Disabling IRQ #630

A previous commit removed ->cqe_seen that was handling this case,
but we need to handle this a bit differently due to completions
now running outside the queue lock. Return IRQ_HANDLED from the
IRQ handler, if the completion ring head was moved since we last
saw it.

Fixes: 5cb525c831 ("nvme-pci: handle completions outside of the queue lock")
Reported-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Tested-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21 08:41:52 -06:00
Jens Axboe
81b1dab458 Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-4.18/block
Pull NVMe changes from Keith:

"This is just the first nvme pull request for 4.18. There are several
fabrics and target patches that I missed, so there will be more to
come."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-pci: drop IRQ disabling on submission queue lock
  nvme-pci: split the nvme queue lock into submission and completion locks
  nvme-pci: handle completions outside of the queue lock
  nvme-pci: move ->cq_vector == -1 check outside of ->q_lock
  nvme-pci: remove cq check after submission
  nvme-pci: simplify nvme_cqe_valid
  nvme: mark the result argument to nvme_complete_async_event volatile
  nvme/pci: Sync controller reset for AER slot_reset
  nvme/pci: Hold controller reference during async probe
  nvme: only reconfigure discard if necessary
  nvme/pci: Use async_schedule for initial reset work
  nvme: lightnvm: add granby support
  NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage
  nvme: change order of qid and cmdid in completion trace
  nvme: fc: provide a descriptive error
2018-05-21 08:33:37 -06:00
Srinivas Kandagatla
a4ae3af59b
ASoC: qdsp6: q6afe: Add support to MI2S sysclks
This patch adds support to LPASS Bit clock, LPASS Digital
core clock and OSR clock. These clocks are required for both
MI2S and PCM setup.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 15:31:01 +01:00
Srinivas Kandagatla
d383914572
ASoC: qdsp6: q6afe: Add support to MI2S ports
This patch adds support to 4 MI2S ports on LPASS.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 15:31:00 +01:00
Srinivas Kandagatla
4d430d5a0e
ASoC: qdsp6: qdafe: Add SLIMBus port Support
This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 15:30:59 +01:00
Srinivas Kandagatla
7fa2d70f97
ASoC: qdsp6: q6afe: Add q6afe driver
This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.

AFE module sits right at the other end of cpu where the codec/audio
devices are connected.

AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 15:30:58 +01:00
Ulf Hansson
8603f1e838 Merge branch 'fixes' into next 2018-05-21 15:49:25 +02:00
Christoph Hellwig
9181ece38c mmc: wbsd: handle highmem pages
Use sg_copy_{from,to}_buffer to bounce buffer and kmap_atomic to map the
scatterlist entry before using it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:21 +02:00
Christoph Hellwig
a403417382 mmc: ushc: handle highmem pages
Pass the scatterlist on to the USB subsystem instead of expecting a
kernel virtual address.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:20 +02:00
Christoph Hellwig
b189e7589f mmc: mxcmmc: handle highmem pages
Use kmap_atomic to map the scatterlist entry before using it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:20 +02:00
Christoph Hellwig
5b4277814e mmc: atmel-mci: use sg_copy_{from,to}_buffer
This handles highmem pages, and also cleans up the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:19 +02:00
Christoph Hellwig
53d7e098ba mmc: android-goldfish: use sg_copy_{from,to}_buffer
This handles highmem pages, and also cleans up the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:19 +02:00
Shawn Lin
65f9e20e0d mmc: block: Don't switch to the same partition type in mmc_blk_remove()
It's pointless to switch and trace partition type if the current
selected device partition is the same with that one. Moreover, cycled
claiming host associated with mmc_blk_part_switch() could make
mmc_blk_remove() end up waiting for grabbing the context if it's
occupied, which lead requests could still hit the low-level drivers,
if an asynchronous unbind for host drivers happened, as the card hasn't
been set removed in the remove path.

So a simple dd in background:
dd if=/dev/mmcblk0 of=/dev/null bs=512k count=100000 &

and doing unbind then:
echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/unbind

could make the console stuck for quite a while depending on the
numbers of requests.

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 15:49:18 +02:00
Honghui Zhang
42fe2f91b4 PCI: mediatek: Implement chained IRQ handling setup
Implement irq_chip based solution for IRQs management in order to
comply with IRQ framework.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-21 14:43:45 +01:00
Dmitry Osipenko
dc628cdf5c cpufreq: tegra20: Wrap cpufreq into platform driver
Currently tegra20-cpufreq kernel module isn't getting autoloaded because
there is no device associated with the module, this is one of two patches
that resolves the module autoloading. This patch adds a module alias that
will associate the tegra20-cpufreq kernel module with the platform device,
other patch will instantiate the actual platform device. And now it makes
sense to wrap cpufreq driver into a platform driver for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
7732c9e0db cpufreq: tegra20: Allow cpufreq driver to be built as loadable module
Nothing prevents Tegra20 CPUFreq module to be unloaded, hence allow it to
be built as a non-builtin kernel module.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
a413d2cea1 cpufreq: tegra20: Check if this is Tegra20 machine
Don't even try to request the clocks during of module initialization on
non-Tegra20 machines (this is the case for a multi-platform kernel) for
consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
f39d4d5ed3 cpufreq: tegra20: Remove unneeded variable initialization
Remove unneeded variable initialization solely for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
c22d1cb0dc cpufreq: tegra20: Remove unnecessary parentheses
Remove unnecessary parentheses as suggested by the checkpatch script.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
f53908680c cpufreq: tegra20: Remove unneeded check in tegra_cpu_init
Remove checking of the CPU number for consistency as it won't ever fail
unless there is a severe bug in the cpufreq core.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
64cd64e72b cpufreq: tegra20: Release clocks properly
Properly put requested clocks in the module init/exit code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
9b633cb621 cpufreq: tegra20: Remove EMC clock usage
The EMC driver has been gone 4 years ago, since the commit a7cbe92cef
("ARM: tegra: remove tegra EMC scaling driver"). Remove the EMC clock
usage as it does nothing. We may consider re-implementing the EMC scaling
later, probably using PM Memory Bandwidth QoS API.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
9a25ba9a15 cpufreq: tegra20: Clean up included headers
Remove unused/unneeded headers and sort them in the alphabet order.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
e08551b827 cpufreq: tegra20: Clean up whitespaces in the code
Remove unneeded blank line and replace whitespaces with a tab in the code
for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:24 +02:00
Dmitry Osipenko
4964027700 cpufreq: tegra20: Change module description
Change module description to be in line with the other Tegra drivers, just
for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21 13:44:23 +02:00
Corneliu Doban
3de06d5a1f mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus
The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to
properly reset the host controller (reset all) on initialization
after exiting deep sleep.

Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
Fixes: c833e92bbb ("mmc: sdhci-iproc: support standard byte register accesses")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 13:27:22 +02:00
Corneliu Doban
5f651b8704 mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
When the host controller accepts only 32bit writes, the value of the
16bit TRANSFER_MODE register, that has the same 32bit address as the
16bit COMMAND register, needs to be saved and it will be written
in a 32bit write together with the command as this will trigger the
host to send the command on the SD interface.
When sending the tuning command, TRANSFER_MODE is written and then
sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and
write it again resulting in wrong value to be written because the
initial write value was saved in a shadow and the read-back returned
a wrong value, from the register.
Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE
when a saved value exist.
Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are
saved for a different reason, although a scenario that will cause the
mentioned problem on this registers is not probable.

Fixes: b580c52d58 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 13:19:48 +02:00
Srinath Mannam
4c94238f37 mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
Remove hard coded mmc cap 1.8v from platform data as it is board specific.
The 1.8v DDR mmc caps can be enabled using DTS property for those
boards that support it.

Fixes: b17b4ab8ce ("mmc: sdhci-iproc: define MMC caps in platform data")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 13:15:49 +02:00
Daniel Mack
637917b1ef
ASoC: core: fix return code in error message
Log the correct error code in case the .open() call to a component fails.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 11:55:03 +01:00
Fabio Estevam
9ff3036a60
ASoC: fsl: Mark 'big-endian' property as optional
Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.

Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 11:54:59 +01:00
Colin Ian King
7608102ee6
ASoC: intel: skylake: fix spelling mistake: "Homogenous" -> "Homogeneous"
Trivial fix to spelling mistake in snprintf literal string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21 11:54:54 +01:00
Borislav Petkov
eaa3a1d46c EDAC, ghes: Make platform-based whitelisting x86-only
ARM machines all have DMI tables so if they request hw error reporting
through GHES, then the driver should be able to detect DIMMs and report
errors successfully (famous last words :)).

Make the platform-based list x86-specific so that ghes_edac can load on
ARM.

Reported-by: Qiang Zheng <zhengqiang10@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Qiang Zheng <zhengqiang10@huawei.com>
Link: https://lkml.kernel.org/r/1526039543-180996-1-git-send-email-zhengqiang10@huawei.com
2018-05-21 12:18:57 +02:00
Stefan Mavrodiev
5d9ef839f8 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC.
Currently used card is KLMAG2GEND, wired to MMC2 slot.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-21 11:41:03 +02:00
Takashi Sakamoto
d0aa590962 ALSA: dice: add stream format parameters for TC Electronic Digital Konnekt x32
TC Electronic Digital Konnekt x32 is an application of WaveFront DiceII STD
and doesn't support TCAT extended application protocol. For such devices,
ALSA dice driver needs to have hard-coded parameters for stream formats.

This commit adds stream format parameters for this model. Unfortunately, at
sampling transmission frequencies of 88.2/96.0kHz, I confirmed that current
ALSA dice driver doesn't drive the device appropriately due to detecting
packet discontinuities.

$ journalctl
kernel: snd_dice fw1.0: Detect discontinuity of CIP: 90 80

At the frequencies, the device transfers 16 data blocks per packet and 16
data channels per data block, as a result one packet includes 1032 bytes
if it's not NODATA. However, as long as I checked, the device often
postpone packet transmission and continue with truncated payload than
metadata in isochronous packet header. Below is a sample of sequence I got.

sec cycle bytes       CIP1       CIP2
 37  3314  1032 0x01100090 0x900449E2
 37  3315     8 0x011000A0 0x9004FFFF
 37  3316  1032 0x011000A0 0x900461E2
 37  3317  1032 0x011000B0 0x900475E2
 37  3318  1032 0x011000C0 0x900489E2
 37  3319     8 0x011000D0 0x9004FFFF
 37  3320  1032 0x011000D0 0x9004A1E2
 37  3321  1032 0x011000E0 0x9004B5E2
 37  3322  1032 0x011000F0 0x9004C9E2
 37  3323     8 0x01100000 0x9004FFFF
 37  3324  1032 0x01100000 0x9004E1E2
 37  3325  1032 0x01100010 0x9004F5E2
 37  3326  1032 0x01100020 0x900409E2
 37  3327     8 0x01100030 0x9004FFFF
 37  3328  1032 0x01100030 0x900421E2
 37  3329  1032 0x01100040 0x900435E2
 37  3330  (skip)
 37  3331  (skip)
 37  3332  (skip)
 37  3333  (skip)
 37  3334  (skip)
 37  3335  (skip)
 37  3336  (skip)
 37  3337  (skip)
 37  3338  (skip)
 37  3339  (skip)
 37  3340  (skip)
 37  3341  (skip)
 37  3342  (skip)
 37  3343  (skip)
 37  3344  (skip)
 37  3345  (skip)
 37  3346  (skip)
 37  3347  (skip)
 37  3348  (skip)
 37  3349  (skip)
 37  3350  (skip)
 37  3351  (skip)
 37  3352  (skip)
 37  3353  (skip)
 37  3354  (skip)
 37  3355  (skip)
 37  3356  (skip)
 37  3357  (skip)
 37  3358  (skip)
 37  3359  (skip)
 37  3360  (skip)
 37  3361  (skip)
 37  3362  (skip)
 37  3363  (skip)
 37  3364  (skip)
 37  3365  (skip)
 37  3366  (skip)
 37  3367  1032 0x01100050 0x900461E1
 37  3368  1032 0x01100060 0x900475E1
 37  3369  1032 0x01100070 0x9004A1E1
 37  3370  1032 0x01100080 0x9004A1E1 but content of payload is truncated.
 37  3371  (skip)
 37  3371  1032 0x01100080 0x9004B5E0 detect discontinuity
 37  3372  1032 0x01100090 0x9004C9E0
 37  3373  1032 0x011000A0 0x9004E1E0
 37  3374  1032 0x011000B0 0x9004F5E0
 37  3375  1032 0x011000C0 0x900409E0
 37  3376  1032 0x011000D0 0x900421E0
 37  3377  1032 0x011000E0 0x900435E0
 37  3378  1032 0x011000F0 0x900449DF
 37  3379     8 0x01100000 0x9004FFFF
 37  3380  1032 0x01100000 0x900461DF
 37  3381  1032 0x01100010 0x900475DF
 37  3382  1032 0x01100020 0x900489DF
 37  3383     8 0x01100030 0x9004FFFF
 37  3384  1032 0x01100030 0x9004A1DF
 37  3385  1032 0x01100040 0x9004B5DF
 37  3386  1032 0x01100050 0x9004C9DF
 37  3387     8 0x01100060 0x9004FFFF

I cannot confirm this quirks with Windows driver. ALSA dice driver has a
cause if assumed differences between these two drivers are ways of
timestampling to RX packets from the drivers to the device. I've already
reported timestamping quirk of Dice-based devices and this might bring
this issue.

[alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6
http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html

Well, nevertheless, I enable ALSA dice driver to work at the frequencies.
This may brings inconvenience to users but I expect developers and users
to fix it.

$ cd linux-firewire-utils/src
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  040423bb  bus_info_length 4, crc_length 4, crc 9147
404  31333934  bus_name "1394"
408  e0ff8112  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
               max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c  00016604  company_id 000166     |
410  0c232c28  device_id 040c232c28  | EUI-64 000166040c232c28

               root directory
               -----------------------------------------------------------------
414  0006b6cb  directory_length 6, crc 46795
418  03000166  vendor
41c  8100000a  --> descriptor leaf at 444
420  17000030  model
424  8100000f  --> descriptor leaf at 460
428  0c0087c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  000476c2  directory_length 4, crc 30402
434  12000166  specifier id
438  13000001  version
43c  17000030  model
440  81000010  --> descriptor leaf at 480

               descriptor leaf at 444
               -----------------------------------------------------------------
444  0006c490  leaf_length 6, crc 50320
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  54432045  "TC E"
454  6c656374  "lect"
458  726f6e69  "roni"
45c  63000000  "c"

               descriptor leaf at 460
               -----------------------------------------------------------------
460  000772b4  leaf_length 7, crc 29364
464  00000000  textual descriptor
468  00000000  minimal ASCII
46c  44696769  "Digi"
470  74616c4b  "talK"
474  6f6e6e65  "onne"
478  6b747833  "ktx3"
47c  32000000  "2"

               descriptor leaf at 480
               -----------------------------------------------------------------
480  000772b4  leaf_length 7, crc 29364
484  00000000  textual descriptor
488  00000000  minimal ASCII
48c  44696769  "Digi"
490  74616c4b  "talK"
494  6f6e6e65  "onne"
498  6b747833  "ktx3"
49c  32000000  "2"

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-21 11:33:37 +02:00
Jerome Brunet
de1ca2d07b clk: meson: axg: let mpll clocks round closest
Let the mpll dividers achieve the closest rate possible, even if
it means rounding the requested rate up.

This is done to improve the accuracy of the rates provided by these
plls to the audio subsystem

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-21 11:31:59 +02:00
Jerome Brunet
bae1106c37 clk: meson: mpll: add round closest support
Allow the mpll driver to round the requested rate up if
CLK_MESON_MPLL_ROUND_CLOSEST is set and it provides a rate closer to the
requested rate.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-21 11:31:29 +02:00
Mathieu Malaterre
b25b750df9 mmc: block: propagate correct returned value in mmc_rpmb_ioctl
In commit 97548575be ("mmc: block: Convert RPMB to a character device") a
new function `mmc_rpmb_ioctl` was added. The final return is simply
returning a value of `0` instead of propagating the correct return code.

Discovered during a compilation with W=1, silence the following gcc warning

drivers/mmc/core/block.c:2470:6: warning: variable ‘ret’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 97548575be ("mmc: block: Convert RPMB to a character device")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:57:59 +02:00
Jerome Brunet
19c6beaa06 mmc: meson-gx: add device reset
Trigger the reset line of the mmc controller while probing, if available.
The reset should be optional for now, at least until all related DT nodes
have the reset property.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:50:45 +02:00
Jerome Brunet
c5f9ae6cf2 dt-bindings: mmc: meson-gx: add reset
Add the reset to the documentation of the meson-gx mmc controller
bindings.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:50:45 +02:00
Liming Sun
0e190fd071 dt-bindings: mmc: Add binding for BlueField SoC
This commit adds "mellanox,bluefield-dw-mshc" for dwmmc driver
extension on Mellanox BlueField SoC platform.

Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-by: David Woods <dwoods@mellanox.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:44:40 +02:00
Liming Sun
86958dcc5a mmc: dw_mmc-bluefield: Add driver extension
This commit adds extension to the dw_mmc driver for Mellanox BlueField
SoC. It updates the UHS_REG_EXT register to bring up the eMMC card on
this SoC.

Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-by: David Woods <dwoods@mellanox.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:44:40 +02:00
Shawn Lin
6d796c68cd mmc: core: add tunable delay waiting for power to be stable
The hard-coded 10ms delay in mmc_power_up came from
commit 79bccc5aef ("mmc: increase power up delay"), which said "The TI
controller on Toshiba Tecra M5 needs more time to power up or the cards
will init incorrectly or not at all." But it's too engineering solution
for a special board but force all platforms to wait for that long time,
especially painful for mmc_power_up for eMMC when booting.

However, it's added since 2009, and we can't tell if other platforms
benefit from it. But in practise, the modern hardware are most likely to
have a stable power supply with 1ms after setting it for no matter PMIC
or discrete power. And more importnatly, most regulators implement the
callback of ->set_voltage_time_sel() for regulator core to wait for
specific period of time for the power supply to be stable, which means
once regulator_set_voltage_* return, the power should reach the the
minimum voltage that works for initialization. Of course, if there
are some other ways for host to power the card, we should allow them
to argue a suitable delay as well.

With this patch, we could assign the delay from firmware, or we could
assigne it via ->set_ios() callback from host drivers.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:38:50 +02:00
Shawn Lin
10a0ed7a94 Documentation: mmc: addtional description for post-power-on-delay-ms
post-power-on-delay-ms woule be reused to substitute the hard-coded 10ms
delay waiting for power supply to be stable, specificed by individual
platform/board. Default to 10ms as before, if no available.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:38:36 +02:00
Masaharu Hayakawa
caeffcf1b2 mmc: renesas_sdhi: Add r8a77965 support
This patch adds r8a77965 support in SDHI.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21 10:36:16 +02:00