commit c8dbdc6e38 upstream.
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/20260222152601.1978655-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb868db5f4 upstream.
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers.
Cc: stable@vger.kernel.org
Fixes: a6fb8d5a8b ("gve: Tx path for DQO-QPL")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220215324.1631350-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21e4271e65 upstream.
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 017c179252 upstream.
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 162d331d83 upstream.
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 767d23ade7 upstream.
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03cc8f90d0 upstream.
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c3 ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written.
Fixes: 8f641d93c3 ("libertas: detect TX lockups and reset hardware")
Fixes: 954ee164f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206195356.15647-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c854758abe upstream.
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present.
Cc: stable@vger.kernel.org
Fixes: 33e5a2f776 ("wireless: update radiotap parser")
Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com
Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbddd30341 upstream.
The Acer Aspire V3-572G has a combo jack (ALC283) but the BIOS
sets pin 0x19 to 0x411111f0 (not connected), so the headset mic
is not detected.
Add a quirk to override pin 0x19 as a headset mic and enable
headset mode.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221075
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://patch.msgid.link/20260221-fix-detect-mic-v1-1-b6e427b5275d@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9fb2028f1 upstream.
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54f9d645a5 upstream.
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1a196e0a6 upstream.
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260303113050.58127-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ca191cec1 upstream.
As part of the work to remove the dependency on calling into the decompressor
code (startup_64()) for a UEFI boot, a call to rmpadjust() was removed from
sev_enable() in favor of checking the value of the snp_vmpl variable.
When booting through a non-UEFI path and calling startup_64(), the call to
sev_enable() is performed before the BSS section is zeroed. With the removal
of the rmpadjust() call and the corresponding check of the return code, the
snp_vmpl variable is checked.
Since the kernel is running at VMPL0, the snp_vmpl variable will not have been
set and should be the default value of 0. However, since the call occurs
before the BSS is zeroed, the snp_vmpl variable may not actually be zero,
which will cause the guest boot to fail.
Since the decompressor relocates itself, the BSS would need to be cleared both
before and after the relocation, but this would, in effect, cause all of the
changes to BSS variables before relocation to be lost after relocation.
Instead, move the snp_vmpl variable into the .data section so that it is
initialized and the value made safe during relocation. As a pre-caution
against future changes, move other SEV-related decompressor variables into the
.data section, too.
Fixes: 68a501d7fd ("x86/boot: Drop redundant RMPADJUST in SEV SVSM presence check")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Tested-by: Kevin Hui <kevinhui@meta.com>
Tested-by: Changyuan Lyu <changyuanl@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/5648b7de5b0a5d0dfef3785f9582b718678c6448.1770217260.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9073428bb2 upstream.
The SEV-SNP IBPB-on-Entry feature does not require a guest-side
implementation. It was added in Zen5 h/w, after the first SNP Zen
implementation, and thus was not accounted for when the initial set of SNP
features were added to the kernel.
In its abundant precaution, commit
8c29f01654 ("x86/sev: Add SEV-SNP guest feature negotiation support")
included SEV_STATUS' IBPB-on-Entry bit as a reserved bit, thereby masking
guests from using the feature.
Allow guests to make use of IBPB-on-Entry when supported by the hypervisor, as
the bit is now architecturally defined and safe to expose.
Fixes: 8c29f01654 ("x86/sev: Add SEV-SNP guest feature negotiation support")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260203222405.4065706-2-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d1973a0c7 upstream.
CONFIG_EFI_SBAT_FILE can be a relative path. When compiling using a different
output directory (O=) the build currently fails because it can't find the
filename set in CONFIG_EFI_SBAT_FILE:
arch/x86/boot/compressed/sbat.S: Assembler messages:
arch/x86/boot/compressed/sbat.S:6: Error: file not found: kernel.sbat
Add $(srctree) as include dir for sbat.o.
[ bp: Massage commit message. ]
Fixes: 61b57d3539 ("x86/efi: Implement support for embedding SBAT data for x86")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/f4eda155b0cef91d4d316b4e92f5771cb0aa7187.1772047658.git.jstancek@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a8a48644c upstream.
IMC on SPR and EMR does not support sub-channels. In contrast, CPUs
that use gnr_uncores[] (e.g. Granite Rapids and Sierra Forest)
implement two command schedulers (SCH0/SCH1) per memory channel,
providing logically independent command and data paths.
Do not reuse the spr_uncore_imc[] configuration for these CPUs.
Instead, introduce a dedicated gnr_uncore_imc[] with per-scheduler
events, so userspace can monitor SCH0 and SCH1 independently.
On these CPUs, replace cas_count_{read,write} with
cas_count_{read,write}_sch{0,1}. This may break existing userspace
that relies on cas_count_{read,write}, prompting it to switch to the
per-scheduler events, as the legacy event reports only partial
traffic (SCH0).
Fixes: 632c4bf6d0 ("perf/x86/intel/uncore: Support Granite Rapids")
Fixes: cb4a6ccf35 ("perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260210005225.20311-1-zide.chen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4b0bf6a40 upstream.
efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE
and EFI_BOOT_SERVICES_DATA using memblock_free_late().
There are two issue with that: memblock_free_late() should be used for
memory allocated with memblock_alloc() while the memory reserved with
memblock_reserve() should be freed with free_reserved_area().
More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
efi_free_boot_services() is called before deferred initialization of the
memory map is complete.
Benjamin Herrenschmidt reports that this causes a leak of ~140MB of
RAM on EC2 t3a.nano instances which only have 512MB or RAM.
If the freed memory resides in the areas that memory map for them is
still uninitialized, they won't be actually freed because
memblock_free_late() calls memblock_free_pages() and the latter skips
uninitialized pages.
Using free_reserved_area() at this point is also problematic because
__free_page() accesses the buddy of the freed page and that again might
end up in uninitialized part of the memory map.
Delaying the entire efi_free_boot_services() could be problematic
because in addition to freeing boot services memory it updates
efi.memmap without any synchronization and that's undesirable late in
boot when there is concurrency.
More robust approach is to only defer freeing of the EFI boot services
memory.
Split efi_free_boot_services() in two. First efi_unmap_boot_services()
collects ranges that should be freed into an array then
efi_free_boot_services() later frees them after deferred init is complete.
Link: https://lore.kernel.org/all/ec2aaef14783869b3be6e3c253b2dcbf67dbc12a.camel@kernel.crashing.org
Fixes: 916f676f8d ("x86, efi: Retain boot service code until after switching to virtual mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec3070f01f upstream.
Uniwill devices have a built in gesture in the touchpad to de- and
reactivate it by double taping the upper left corner. This gesture stops
working when latency is set to high, so this patch keeps the latency on
normal.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
[jkosina@suse.com: change bit from 24 to 25]
[jkosina@suse.com: update shortlog]
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97d5c8f5c0 upstream.
As reported by MPDarkGuy on discord, NULL pointer dereferences were
happening because not all the conditional effects bits were cleared.
Properly clear all conditional effect bits from ffbit
Fixes: 7f3d7bc0df ("HID: pidff: Better quirk assigment when searching for fields")
Cc: stable@vger.kernel.org # 6.18.x
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecfa6f3449 upstream.
In commit 2ff5baa9b5 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f9478072 upstream.
If a write urb fails then more needs to be done other than just logging
the message, otherwise the transmission could be stalled. Properly
increment the error counters and wake up the queues so that data will
continue to flow.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-slackness-dynamic-9195@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7299b1b39a upstream.
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5eaad4f768 upstream.
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Tested-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/2026022320-poser-stiffly-9d84@gregkh
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e446fd058 upstream.
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022319-huff-absurd-6a18@gregkh
Fixes: 9f2d3eae88 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 952caa5da1 upstream.
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-starlight-scaling-2cea@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38a01c9700 upstream.
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022316-answering-strainer-a5db@gregkh
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11de1d3ae5 upstream.
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022347-legibly-attest-cc5c@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c58b6c29a4 upstream.
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: d40261236e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Link: https://patch.msgid.link/2026022326-shack-headstone-ef6f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b063c002c upstream.
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/2026022305-substance-virtual-c728@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12133a483d upstream.
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: c46ee38620 ("NFC: pn533: add NXP pn533 nfc device driver")
Link: https://patch.msgid.link/2026022329-flashing-ought-7573@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfbc0b5b32 upstream.
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock.
Cc: stable@vger.kernel.org
Fixes: 34731df288 ("V4L/DVB (3501): Dmxdev: use dvb_ringbuffer")
Reported-by: syzbot+ab12f0c08dd7ab8d057c@syzkaller.appspotmail.com
Tested-by: syzbot+ab12f0c08dd7ab8d057c@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/698a26d3.050a0220.3b3015.007d.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a403d7aa9 upstream.
The m->index isn't updated when m->show() overflows and retains its
value before the current mount causing a restart to start at the same
value. If that happens in short order to due a quickly expanding mount
table this would cause the same mount to be shown again and again.
Ensure that *pos always equals the mount id of the mount that was
returned by start/next. On restart after overflow mnt_find_id_at(*pos)
finds the exact mount. This should avoid duplicates, avoid skips and
should handle concurrent modification just fine.
Cc: <stable@vger.kernel.org>
Fixed: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Link: https://patch.msgid.link/20260129-geleckt-treuhand-4bb940acacd9@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdcfce9307 upstream.
If a recursive call to ep_loop_check_proc() hits the `result = INT_MAX`,
an integer overflow will occur in the calling ep_loop_check_proc() at
`result = max(result, ep_loop_check_proc(ep_tovisit, depth + 1) + 1)`,
breaking the recursion depth check.
Fix it by using a different placeholder value that can't lead to an
overflow.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: f2e467a482 ("eventpoll: Fix semi-unbounded recursion")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260223-epoll-int-overflow-v1-1-452f35132224@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7d9be66b7 ]
Commit 8c14f9c703 ("ARCNET: add com20020 PCI IDs with metadata")
converted the com20020-pci driver to use a card info structure instead
of a single flag mask in driver_data. However, it failed to take into
account that in the original code, driver_data of 0 indicates a card
with no special flags, not a card that should not have any card info
structure. This introduced a null pointer dereference when cards with
no flags were probed.
Commit bd6f1fd5d3 ("net: arcnet: com20020: Fix null-ptr-deref in
com20020pci_probe()") then papered over this issue by rejecting cards
with no driver_data instead of resolving the problem at its source.
Fix the original issue by introducing a new card info structure for
2.5Mbit cards that does not set any flags and using it if no
driver_data is present.
Fixes: 8c14f9c703 ("ARCNET: add com20020 PCI IDs with metadata")
Fixes: bd6f1fd5d3 ("net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260213045510.32368-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe26ae6ac8 ]
The pipe BPP value shouldn't be set outside of the source's / sink's
valid pipe BPP range, ensure this when increasing the minimum pipe BPP
value to 30 due to HDR.
While at it debug print if the HDR mode was requested for a connector by
setting the corresponding HDR connector property. This indicates
if the requested HDR mode could not be enabled, since the selected
pipe BPP is below 30, due to a sink capability or link BW limit.
v2:
- Also handle the case where the sink could support the target 30 BPP
only in DSC mode due to a BW limit, but the sink doesn't support DSC
or 30 BPP as a DSC input BPP. (Chaitanya)
- Debug print the connector's HDR mode in the link config dump, to
indicate if a BPP >= 30 required by HDR couldn't be reached. (Ankit)
- Add Closes: trailer. (Ankit)
- Don't print the 30 BPP-outside of valid BPP range debug message if
the min BPP is already > 30 (and so a target BPP >= 30 required
for HDR is ensured).
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7052
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15503
Fixes: ba49a4643c ("drm/i915/dp: Set min_bpp limit to 30 in HDR mode")
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> # v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-1-imre.deak@intel.com
(cherry picked from commit 08b7ef16b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 338465490c ]
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-17-imre.deak@intel.com
Stable-dep-of: fe26ae6ac8 ("drm/i915/dp: Fix pipe BPP clamping due to HDR")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e6f596d6a ]
There are declarations of the variable "eentry", "pcpu_handlers[]" and
"exception_handlers[]" in asm/setup.h, the source files already include
this header file directly or indirectly, so no need to declare them in
the source files, just remove the code.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 055c7e7519 ]
After commit 4cd641a79e ("LoongArch: Remove unnecessary checks for ORC
unwinder"), the system can not boot normally under some configs (such as
enable KASAN), there are many error messages "cannot find unwind pc".
The kernel boots normally with the defconfig, so no problem found out at
the first time. Here is one way to reproduce:
cd linux
make mrproper defconfig -j"$(nproc)"
scripts/config -e KASAN
make olddefconfig all -j"$(nproc)"
sudo make modules_install
sudo make install
sudo reboot
The address that can not unwind is not a valid kernel address which is
between "pcpu_handlers[cpu]" and "pcpu_handlers[cpu] + vec_sz" due to
the code of eentry was copied to the new area of pcpu_handlers[cpu] in
setup_tlb_handler(), handle this special case to get the valid address
to unwind normally.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cd641a79e ]
According to the following function definitions, __kernel_text_address()
already checks __module_text_address(), so it should remove the check of
__module_text_address() in bt_address() at least.
int __kernel_text_address(unsigned long addr)
{
if (kernel_text_address(addr))
return 1;
...
return 0;
}
int kernel_text_address(unsigned long addr)
{
bool no_rcu;
int ret = 1;
...
if (is_module_text_address(addr))
goto out;
...
return ret;
}
bool is_module_text_address(unsigned long addr)
{
guard(rcu)();
return __module_text_address(addr) != NULL;
}
Furthermore, there are two checks of __kernel_text_address(), one is in
bt_address() and the other is after calling bt_address(), it looks like
redundant.
Handle the exception address first and then use __kernel_text_address()
to validate the calculated address for exception or the normal address
in bt_address(), then it can remove the check of __kernel_text_address()
after calling bt_address().
Just remove unnecessary checks, no functional changes intended.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: 055c7e7519 ("LoongArch: Handle percpu handler address for ORC unwinder")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e244a9f1 ]
When CONFIG_SLAB_FREELIST_RANDOM is enabled and get_random_u32()
is called in an NMI context, lockdep complains because it acquires
a local_lock:
================================
WARNING: inconsistent lock state
6.19.0-rc5-slab-for-next+ #325 Tainted: G N
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
kunit_try_catch/8312 [HC2[2]:SC0[0]:HE0:SE1] takes:
ffff88a02ec49cc0 (batched_entropy_u32.lock){-.-.}-{3:3}, at: get_random_u32+0x7f/0x2e0
{INITIAL USE} state was registered at:
lock_acquire+0xd9/0x2f0
get_random_u32+0x93/0x2e0
__get_random_u32_below+0x17/0x70
cache_random_seq_create+0x121/0x1c0
init_cache_random_seq+0x5d/0x110
do_kmem_cache_create+0x1e0/0xa30
__kmem_cache_create_args+0x4ec/0x830
create_kmalloc_caches+0xe6/0x130
kmem_cache_init+0x1b1/0x660
mm_core_init+0x1d8/0x4b0
start_kernel+0x620/0xcd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xf3/0x140
common_startup_64+0x13e/0x148
irq event stamp: 76
hardirqs last enabled at (75): [<ffffffff8298b77a>] exc_nmi+0x11a/0x240
hardirqs last disabled at (76): [<ffffffff8298b991>] sysvec_irq_work+0x11/0x110
softirqs last enabled at (0): [<ffffffff813b2dda>] copy_process+0xc7a/0x2350
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(batched_entropy_u32.lock);
<Interrupt>
lock(batched_entropy_u32.lock);
*** DEADLOCK ***
Fix this by using pseudo-random number generator if !allow_spin.
This means kmalloc_nolock() users won't get truly random numbers,
but there is not much we can do about it.
Note that an NMI handler might interrupt prandom_u32_state() and
change the random state, but that's safe.
Link: https://lore.kernel.org/all/0c33bdee-6de8-4d9f-92ca-4f72c1b6fb9f@suse.cz
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Cc: stable@vger.kernel.org
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260210081900.329447-3-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31e0886fd5 ]
CONFIG_SLUB_TINY minimizes the SLUB's memory overhead in multiple ways,
mainly by avoiding percpu caching of slabs and objects. It also reduces
code size by replacing some code paths with simplified ones through
ifdefs, but the benefits of that are smaller and would complicate the
upcoming changes.
Thus remove these code paths and associated ifdefs and simplify the code
base.
Link: https://patch.msgid.link/20251105-sheaves-cleanups-v1-4-b8218e1ac7ef@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Stable-dep-of: a1e244a9f1 ("mm/slab: use prandom if !allow_spin")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007be4327e ]
Simply copying shared data to a local variable cannot prevent data
races. The compiler is allowed to optimize away the local copy and
re-read the shared memory, causing a Time-of-Check Time-of-Use (TOCTOU)
issue if the data changes between the check and the usage.
To enforce the use of the local variable, use READ_ONCE() when reading
the shared data and WRITE_ONCE() when updating it. Apply these macros to
the three identified locations (curr_sense, adc, and fault) where local
variables are used for error validation, ensuring the value remains
consistent.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Closes: https://lore.kernel.org/all/6fe17868327207e8b850cf9f88b7dc58b2021f73.camel@decadent.org.uk/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Fixes: b8d5acdcf5 ("hwmon: (max16065) Use local variable to avoid TOCTOU")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20260203121443.5482-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7afda7fcd ]
The commit 6a23e7b433 ("drm/amd: Clean up kfd node on surprise
disconnect") introduced early KFD cleanup when drm_dev_is_unplugged()
returns true. However, this causes hangs during normal module unload
(rmmod amdgpu).
The issue occurs because drm_dev_unplug() is called in amdgpu_pci_remove()
for all removal scenarios, not just surprise disconnects. This was done
intentionally in commit 39934d3ed5 ("Revert "drm/amdgpu: TA unload
messages are not actually sent to psp when amdgpu is uninstalled"") to
fix IGT PCI software unplug test failures. As a result,
drm_dev_is_unplugged() returns true even during normal module unload,
triggering the early KFD cleanup inappropriately.
The correct check should distinguish between:
- Actual surprise disconnect (eGPU unplugged): pci_dev_is_disconnected()
returns true
- Normal module unload (rmmod): pci_dev_is_disconnected() returns false
Replace drm_dev_is_unplugged() with pci_dev_is_disconnected() to ensure
the early cleanup only happens during true hardware disconnect events.
Cc: stable@vger.kernel.org
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/b0c22deb-c0fa-3343-33cf-fd9a77d7db99@absolutedigital.net/
Fixes: 6a23e7b433 ("drm/amd: Clean up kfd node on surprise disconnect")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
