[ Upstream commit 3651ad5249 ]
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
Fixes: 9e6be018b2 ("PCI: brcmstb: Enable child bus device regulators from DT")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250214173944.47506-5-james.quinlan@broadcom.com
[kwilczynski: commit log, use comma in the message to match style with
other similar messages]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c97321e11 ]
The driver has been mistakenly writing to a read-only (RO)
configuration space register (PCI_EXP_LNKCAP) to change the
PCIe link capability.
Although harmless in this case, the proper write destination
is an internal register that is reflected by PCI_EXP_LNKCAP.
Thus, fix the brcm_pcie_set_gen() function to correctly update
the link capability.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-3-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d36589c6 ]
When the user elects to limit the PCIe generation via the appropriate
devicetree property, apply the settings before the PCIe link up, not
after.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-2-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ac47fbf4f ]
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 660c396c98 ]
Ordering issues here cause an uninitialized (default STANDALONE)
usecase to be programmed (which appears to be a MUX) in some cases
when msm_dsi_host_register() is called, leading to the slave PLL in
bonded-DSI mode to source from a clock parent (dsi1vco) that is off.
This should seemingly not be a problem as the actual dispcc clocks from
DSI1 that are muxed in the clock tree of DSI0 are way further down, this
bit still seems to have an effect on them somehow and causes the right
side of the panel controlled by DSI1 to not function.
In an ideal world this code is refactored to no longer have such
error-prone calls "across subsystems", and instead model the "PLL src"
register field as a regular mux so that changing the clock parents
programmatically or in DTS via `assigned-clock-parents` has the
desired effect.
But for the avid reader, the clocks that we *are* muxing into DSI0's
tree are way further down, so if this bit turns out to be a simple mux
between dsiXvco and out_div, that shouldn't have any effect as this
whole tree is off anyway.
Fixes: 57bf433893 ("drm/msm/dsi: Pass down use case to PHY")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637650/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14ad809ceb ]
When configuring the timing of DSI hosts (interfaces) in
dsi_timing_setup() all values written to registers are taking
bonded-mode into account by dividing the original mode width by 2
(half the data is sent over each of the two DSI hosts), but the full
width instead of the interface width is passed as hdisplay parameter to
dsi_update_dsc_timing().
Currently only msm_dsc_get_slices_per_intf() is called within
dsi_update_dsc_timing() with the `hdisplay` argument which clearly
documents that it wants the width of a single interface (which, again,
in bonded DSI mode is half the total width of the mode) resulting in all
subsequent values to be completely off.
However, as soon as we start to pass the halved hdisplay
into dsi_update_dsc_timing() we might as well discard
msm_dsc_get_slices_per_intf() since the value it calculates is already
available in dsc->slice_count which is per-interface by the current
design of MSM DPU/DSI implementations and their use of the DRM DSC
helpers.
Fixes: 08802f515c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637648/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baf4907287 ]
Since SM8250 all downstream sources program clock inverters in
PLL_CLOCK_INVERTERS_1 register and leave the PLL_CLOCK_INVERTERS as
reset value (0x0). The most recent Hardware Programming Guide for 3 nm,
4 nm, 5 nm and 7 nm PHYs also mention PLL_CLOCK_INVERTERS_1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/634489/
Link: https://lore.kernel.org/r/20250129115504.40080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b4614843 ]
The driver isn't supposed to consult crtc_state->active/active_check for
resource allocation. Instead all resources should be allocated if
crtc_state->enabled is set. Stop consulting active / active_changed in
order to determine whether the hardware resources should be
(re)allocated.
Fixes: ccc862b957 ("drm/msm/dpu: Fix reservation failures in modeset")
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633393/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1addcf849 ]
Remove extraneous tab and newline in dml2_core_dcn4.c that was
reported by the bot
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502211920.txUfwtSj-lkp@intel.com/
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ce2c7e201 ]
This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios. Use the correct name when the
enable GPIO is not found.
Fixes: e2450d32e5 ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbf937dcad ]
Before 456d8aa37d ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
Link: https://lore.kernel.org/r/e12898835f25234561c9d7de4435590d957b85d9.1734924854.git.dns@arista.com
Fixes: 456d8aa37d ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free")
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72fcb88e7b ]
Rename member aud_sampe_size of struct hdmi_audio_param to
aud_sample_size to fix a typo and enhance readability.
This commit brings no functional changes.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-20-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be123cafc ]
The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.
Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.
To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-18-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06cc1e380 ]
Commit 566f1dd528 ("PCI: Relax bridge window tail sizing rules")
relaxed bridge window tail alignment rule for the non-optional part
(size0, no add_size/add_align). The change, however, also overwrote
add_align, which is only related to case where optional size1 related
entry is added into realloc head.
Correct this by removing the add_align overwrite.
Link: https://lore.kernel.org/r/20241216175632.4175-2-ilpo.jarvinen@linux.intel.com
Fixes: 566f1dd528 ("PCI: Relax bridge window tail sizing rules")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xiaochun Lee <lixc17@lenovo.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a596ad00f ]
7180c1d086 ("PCI: Distribute available resources for root buses, too")
breaks BAR assignment on some devices:
pci 0006:03:00.0: BAR 0 [mem 0x6300c0000000-0x6300c1ffffff 64bit pref]: assigned
pci 0006:03:00.1: BAR 0 [mem 0x6300c2000000-0x6300c3ffffff 64bit pref]: assigned
pci 0006:03:00.2: BAR 0 [mem size 0x00800000 64bit pref]: can't assign; no space
pci 0006:03:00.0: VF BAR 0 [mem size 0x02000000 64bit pref]: can't assign; no space
pci 0006:03:00.1: VF BAR 0 [mem size 0x02000000 64bit pref]: can't assign; no space
The apertures of domain 0006 before 7180c1d086:
6300c0000000-63ffffffffff : PCI Bus 0006:00
6300c0000000-6300c9ffffff : PCI Bus 0006:01
6300c0000000-6300c9ffffff : PCI Bus 0006:02 # 160MB
6300c0000000-6300c8ffffff : PCI Bus 0006:03 # 144MB
6300c0000000-6300c1ffffff : 0006:03:00.0 # 32MB
6300c2000000-6300c3ffffff : 0006:03:00.1 # 32MB
6300c4000000-6300c47fffff : 0006:03:00.2 # 8MB
6300c4800000-6300c67fffff : 0006:03:00.0 # 32MB
6300c6800000-6300c87fffff : 0006:03:00.1 # 32MB
6300c9000000-6300c9bfffff : PCI Bus 0006:04 # 12MB
6300c9000000-6300c9bfffff : PCI Bus 0006:05 # 12MB
6300c9000000-6300c91fffff : PCI Bus 0006:06 # 2MB
6300c9200000-6300c93fffff : PCI Bus 0006:07 # 2MB
6300c9400000-6300c95fffff : PCI Bus 0006:08 # 2MB
6300c9600000-6300c97fffff : PCI Bus 0006:09 # 2MB
After 7180c1d086:
6300c0000000-63ffffffffff : PCI Bus 0006:00
6300c0000000-6300c9ffffff : PCI Bus 0006:01
6300c0000000-6300c9ffffff : PCI Bus 0006:02 # 160MB
6300c0000000-6300c43fffff : PCI Bus 0006:03 # 68MB
6300c0000000-6300c1ffffff : 0006:03:00.0 # 32MB
6300c2000000-6300c3ffffff : 0006:03:00.1 # 32MB
--- no space --- : 0006:03:00.2 # 8MB
--- no space --- : 0006:03:00.0 # 32MB
--- no space --- : 0006:03:00.1 # 32MB
6300c4400000-6300c4dfffff : PCI Bus 0006:04 # 10MB
6300c4400000-6300c4dfffff : PCI Bus 0006:05 # 10MB
6300c4400000-6300c45fffff : PCI Bus 0006:06 # 2MB
6300c4600000-6300c47fffff : PCI Bus 0006:07 # 2MB
6300c4800000-6300c49fffff : PCI Bus 0006:08 # 2MB
6300c4a00000-6300c4bfffff : PCI Bus 0006:09 # 2MB
We can see that the window to 0006:03 gets shrunken too much and 0006:04
eats away the window for 0006:03:00.2.
The offending commit distributes the upstream bridge's resources multiple
times to every downstream bridge, hence makes the aperture smaller than
desired because calculation of io_per_b, mmio_per_b and mmio_pref_per_b
becomes incorrect.
Instead, distribute downstream bridges' own resources to resolve the issue.
Link: https://lore.kernel.org/r/20241204022457.51322-1-kaihengf@nvidia.com
Fixes: 7180c1d086 ("PCI: Distribute available resources for root buses, too")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219540
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Carol Soto <csoto@nvidia.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c917e39cbd ]
Return an error if the IP version doesn't match otherwise
we end up passing a NULL string to amdgpu_ucode_request.
We should never hit this in practice today since we only
enable the umsch code on the supported IP versions, but
add a check to be safe.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502130406.iWQ0eBug-lkp@intel.com/
Fixes: 020620424b ("drm/amd: Use a constant format string for amdgpu_ucode_request")
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f65727be3f ]
If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not
be disabled in any path.
The return value of clk_prepare_enable() is not checked. If mhdp->clk was
not enabled, it may be disabled in the error path of cdns_mhdp_probe()
(e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after
a successful cdns_mhdp_probe() call.
Use the devm_clk_get_enabled() helper function to ensure proper call
balance for mhdp->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: fb43aa0acd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed15511a77 ]
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com>
Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28b529a985 ]
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d226 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5072fc77f ]
Fix a typo where V compare incorrectly compares av[] with av[] itself,
which can result in HDCP failure.
The loop of V compare is expected to iterate for 5 times
which compare V array form av[0][] to av[4][].
It should check loop counter reach the last statement "i == 5"
before return true
Fixes: 0989c02c7a ("drm/bridge: it6505: fix HDCP CTS compare V matching")
Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121-fix-hdcp-v-comp-v4-1-185f45c728dc@ite.com.tw
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bbce873a9 ]
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 229adcffdb ]
The bounding rectangle is adjusted to ensure it aligns to
SSD132X_SEGMENT_WIDTH, which may adjust the pitch. Calculate the pitch
after aligning the left and right edge.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-3-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e14484677 ]
The ssd132x buffer is encoded one pixel per nibble, with two pixels in
each byte. When encoding an 8-bit greyscale input, take the top 4-bits
as the value and ensure the two pixels are distinct and do not overwrite
each other.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-2-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d40d4fae6 ]
The only reason for the ssd130x-spi driver to have an spi_device_id table
is that the SPI core always reports an "spi:" MODALIAS, even when the SPI
device has been registered via a Device Tree Blob.
Without spi_device_id table information in the module's metadata, module
autoloading would not work because there won't be an alias that matches
the MODALIAS reported by the SPI core.
This spi_device_id table is not needed for device matching though, since
the of_device_id table is always used in this case. For this reason, the
struct spi_driver .id_table member is currently not set in the SPI driver.
Because the spi_device_id table is always required for module autoloading,
the SPI core checks during driver registration that both an of_device_id
table and a spi_device_id table are present and that they contain the same
entries for all the SPI devices.
Not setting the .id_table member in the driver then confuses the core and
leads to the following warning when the ssd130x-spi driver is registered:
[ 41.091198] SPI driver ssd130x-spi has no spi_device_id for sinowealth,sh1106
[ 41.098614] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1305
[ 41.105862] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1306
[ 41.113062] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1307
[ 41.120247] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1309
[ 41.127449] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1322
[ 41.134627] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1325
[ 41.141784] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1327
[ 41.149021] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1331
To prevent the warning, set the .id_table even though it's not necessary.
Since the check is done even for built-in drivers, drop the condition to
only define the ID table when the driver is built as a module. Finally,
rename the variable to use the "_spi_id" convention used for ID tables.
Fixes: 74373977d2 ("drm/solomon: Add SSD130x OLED displays SPI support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231114516.2063201-1-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 574f5ee2c8 ]
Each bridge instance creates up to four auxiliary devices with different
names. However, their IDs are always zero, causing duplicate filename
errors when a system has multiple bridges:
sysfs: cannot create duplicate filename '/bus/auxiliary/devices/ti_sn65dsi86.gpio.0'
Fix this by using a unique instance ID per bridge instance. The
instance ID is derived from the I2C adapter number and the bridge's I2C
address, to support multiple instances on the same bus.
Fixes: bf73537f41 ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7a68a0e3f927e26edca6040067fb653eb06efb79.1733840089.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3424c8f53b ]
The infamous mmap_lock taken in copy_from/to_user() can be often
problematic when it's called inside another mutex, as they might lead
to deadlocks.
In the case of ALSA timer code, the bad pattern is with
guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which
was mistakenly introduced at converting to guard(), and it had been
carefully worked around in the past.
This patch fixes those pieces simply by moving copy_from/to_user() out
of the register mutex lock again.
Fixes: 3923de04c8 ("ALSA: pcm: oss: Use guard() for setup")
Reported-by: syzbot+2b96f44164236dda0f3b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67dd86c8.050a0220.25ae54.0059.GAE@google.com
Link: https://patch.msgid.link/20250321172653.14310-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45ff65e30d ]
For 'ti,j7200-cpb-audio' compatible, there is support for only one PLL for
48k. For 11025, 22050, 44100 and 88200 sampling rates, due to absence of
J721E_CLK_PARENT_44100, we get EINVAL while running any audio application.
Add support for these rates by using the 48k parent clock and adjusting
the clock for these rates later in j721e_configure_refclk.
Fixes: 6748d05590 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://patch.msgid.link/20250318113524.57100-1-j-choudhary@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a0c72c1da ]
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
Fixes: dad3197da7 ("ALSA: hda/realtek - Fixup headphone noise via runtime suspend")
Reported-and-tested-by: Oleg Gorobets <oleg.goro@gmail.com>
Link: https://patch.msgid.link/20250315143020.27184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f0d2de417 ]
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad5a0970f8 ]
Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.
Handle spi_setup() return value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 872fc0b6bd ("ASoC: cs35l41: Set the max SPI speed for the whole device")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250304115643.2748-1-v.shevtsov@mt-integration.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a248294a3 ]
On the Dell Inspiron 3505 the battery temperature is always
0.1 degrees larger than the temperature show inside the OEM
application.
Emulate this behaviour to avoid showing strange looking values
like 29.1 degrees.
Fixes: 0331b1b0ba ("platform/x86: dell-ddv: Fix temperature scaling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4878e0b14c ]
Sparse reports:
dell-uart-backlight.c:328:29: warning: symbol
'dell_uart_bl_serdev_driver' was not declared. Should it be static?
Fix it by making the symbol static.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Reviewed-by: Mario Limonciello <maroi.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 886ca11a0c ]
Sparse reports:
lenovo-yoga-tab2-pro-1380-fastcharger.c:222:29: warning: symbol
'yt2_1380_fc_serdev_driver' was not declared. Should it be static?
Fix that by making the symbol static.
Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72e1c440c8 ]
Variable allocated by charlcd_alloc() should be released
by charlcd_free(). The following patch changed kfree() to
charlcd_free() to fix an API misuse.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 718e05ed92 ("auxdisplay: Introduce hd44780_common.[ch]")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2b96a6818 ]
In allegro_probe(), the v4l2 device is not unregistered in the error
path, which results in a memory leak. Fix it by calling
v4l2_device_unregister() before returning error.
Fixes: d74d4e2359 ("media: allegro: move driver out of staging")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fcb42b383 ]
The HEVC driver needs to set the start_bit field explicitly to avoid
causing corrupted frames when the VP9 decoder is used in parallel. The
reason for this problem is that the VP9 and the HEVC decoder share this
register.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5aab0438e ]
The LDO5 regulator has two configuration registers, but only
LDO5CTRL_L contains the bits for enabling/disabling the regulator.
Fixes: 0935ff5f1f ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241218152842.97483-6-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d55f31e290 ]
ia32_emulation_override_cmdline() is an early_param() arg and these
are only needed at boot time. In fact, all other early_param() functions
in arch/x86 seem to have '__init' annotation and
ia32_emulation_override_cmdline() is the only exception.
Fixes: a11e097504 ("x86: Make IA32_EMULATION boot time configurable")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20241210151650.1746022-1-vkuznets%40redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dda366083e ]
Guest FPUs manage vCPU FPU states. They are allocated via
fpu_alloc_guest_fpstate() and are resized in fpstate_realloc() when XFD
features are enabled.
Since the introduction of guest FPUs, there have been inconsistencies in
the kernel buffer size and xfeatures:
1. fpu_alloc_guest_fpstate() uses fpu_user_cfg since its introduction. See:
69f6ed1d14 ("x86/fpu: Provide infrastructure for KVM FPU cleanup")
36487e6228 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
2. __fpstate_reset() references fpu_kernel_cfg to set storage attributes.
3. fpu->guest_perm uses fpu_kernel_cfg, affecting fpstate_realloc().
A recent commit in the tip:x86/fpu tree partially addressed the inconsistency
between (1) and (3) by using fpu_kernel_cfg for size calculation in (1),
but left fpu_guest->xfeatures and fpu_guest->perm still referencing
fpu_user_cfg:
https://lore.kernel.org/all/20250218141045.85201-1-stanspas@amazon.de/1937e18cc3 ("x86/fpu: Fix guest FPU state buffer allocation size")
The inconsistencies within fpu_alloc_guest_fpstate() and across the
mentioned functions cause confusion.
Fix them by using fpu_kernel_cfg consistently in fpu_alloc_guest_fpstate(),
except for fields related to the UABI buffer. Referencing fpu_kernel_cfg
won't impact functionalities, as:
1. fpu_guest->perm is overwritten shortly in fpu_init_guest_permissions()
with fpstate->guest_perm, which already uses fpu_kernel_cfg.
2. fpu_guest->xfeatures is solely used to check if XFD features are enabled.
Including supervisor xfeatures doesn't affect the check.
Fixes: 36487e6228 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
Suggested-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/20250317140613.1761633-1-chao.gao@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8085fcd78c ]
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c96fff391c ]
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ce ("perf: Split up buffer handling from core code")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87886b32d6 ]
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
Closes: https://lore.kernel.org/760e34f9-6034-40e0-82a5-ee9becd24438@roeck-us.net
Fixes: e8106b941c ("[PATCH] lockdep: core, add enable/disable_irq_irqsave/irqrestore() APIs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f1444016 ]
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b31 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2542a3f70e ]
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab4
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e2 ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>