Group single-entries into an enum list
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vladislav Leonov <vlad@zlab.su>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
When interrupt timestamp interval is not valid, we use an estimated value
that can in rare case be bigger than the interrupt timestamp. This is
obviously wrong, so better use interrupt timestamp in this case.
Fixes: 8f4b627656 ("iio: inv_sensors: better timestamp alignment when using watermark")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
aspeed_adc_probe() continues to register ADC resources after deasserting
the shared reset, even if the reset controller reports a failure.
A failed deassertion leaves the hardware unavailable, so stop probing
before installing the cleanup action and enabling the ADC.
Fixes: edf7550a1f ("iio: adc: aspeed: Deassert reset in probe")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
iio_dmaengine_buffer_submit_block() counts scatterlist entries with
sg_nents_for_len(), which walks the CPU-side lengths (sg->length), but
then consumes the DMA-side fields (sg_dma_address()/sg_dma_len()).
After dma_map_sgtable() the two views may differ: an IOMMU can coalesce
the mapping so that only the first sgt->nents entries carry valid DMA
addresses, with nents < orig_nents.
On x86 with an IOMMU enabled, a DMABUF block backed by two 1 MiB
system-heap chunks maps to a single 2 MiB IOVA range. The CPU-side
count is 2, so the loop reads one entry past the mapped set and emits a
garbage vec ({addr = ~0, len = 0}). The DMA engine driver rejects the
vec array (prep returns NULL), the fence is signalled with -ENOMEM,
which a userspace poller cannot observe, and the block is left in
ACTIVE state so every further enqueue of it fails with -EBUSY. The
visible symptom is a stream of zero-filled blocks followed by a wedged
buffer.
Platforms without an IOMMU never hit this because nents == orig_nents.
Size the vec array with sgt->nents, i.e. the DMA-mapped view, and stop
the fill loop once bytes_used is covered - which is allowed to be
smaller than the block size - passing the number of vecs actually
filled to dmaengine_prep_peripheral_dma_vec().
One vec per mapped entry is enough since coalescing can only ever
reduce the number of entries. A single mapped entry longer than the
device's maximum segment size would need more than one, but the DMA API
already assumes no single segment exceeds it [1], and splitting a vec
down to the hardware descriptor size is the DMA engine driver's job -
which both current .device_prep_peripheral_dma_vec() implementations
do.
[1]: commit ab2cbeb0ed ("iommu/dma: Handle SG length overflow better")
Assisted-by: Claude:claude-fable-5
Fixes: 7a86d46998 ("iio: buffer-dmaengine: Support new DMABUF based userspace API")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer,
which only calls iio_triggered_buffer_cleanup() -- it does not undo the
iio_device_register() that already succeeded a few lines above. probe()
then returns the error, the devm-managed indio_dev is freed, but the
iio core still has it registered: the sysfs/chardev nodes stay live and
point at freed memory.
Add an error_unreg_dev label that unregisters the iio device before
falling through to the existing buffer cleanup, mirroring the teardown
order already used in lidar_remove().
Fixes: 4ac4e086fd ("iio: pulsedlight-lidar-lite: add runtime PM")
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool.
Fixes: 9020ef6598 ("iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
admv1013_read_raw() switches on chan->channel instead of
chan->channel2 when handling IIO_CHAN_INFO_CALIBBIAS. The channel
field only ever holds 0 or 1 (see ADMV1013_CHAN_CALIB()), while the
IIO_MOD_I / IIO_MOD_Q modifiers are stored in channel2. As a result,
the switch always falls through to the default case and calibbias
reads always fail with -EINVAL, even though the corresponding
admv1013_write_raw() path correctly uses channel2 and works as
expected.
Fix the read path to switch on chan->channel2, matching the write
path and the actual channel_spec definition.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
When setting the sampling frequency, the check for `base_freq / 2` is
followed by an independent `if` statement for `base_freq / 4`. If `val`
equals `base_freq / 2`, the second check fails and falls through to the
`else if (val != base_freq)` branch, returning `-EINVAL` erroneously.
Fix this by chaining the checks with `else if`.
Fixes: e0f3fc9b47 ("iio: accel: sca3000_core: implemented IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
admv1013_probe() registers a clock notifier whose callback takes st->lock
on POST_RATE_CHANGE. Initialize the mutex before
devm_clk_notifier_register() so the callback cannot observe an
uninitialized lock during probe.
Use devm_mutex_init() so the lock lifetime is tied to the device and
cleanup stays paired with the rest of the managed probe resources.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
Fixes: 9aaea09b4c ("gyro:adis16136: fix debugfs_simple_attr.cocci warnings")
Signed-off-by: Arka Mondal <arkamondalofficial@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be
converted without changing what the file returns. adis16475 and
adis16550 already use debugfs_create_file() for their open coded
files. Use it here too.
Fixes: ae1d37a9bb ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE")
Signed-off-by: Arka Mondal <arkamondalofficial@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
Fixes: 9bf94f836e ("imu:adis16480: fix debugfs_simple_attr.cocci warnings")
Signed-off-by: Arka Mondal <arkamondalofficial@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool.
Fixes: 2a9685d1a3 ("iio: adc: xilinx: use more devres helpers and remove remove()")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
iio_push_to_buffers_with_ts_unaligned() leaks uninitialized heap memory
to userspace if the data passed in is not a multiple of 8 bytes and the
timestamp is enabled. Specify __GFP_ZERO for the devm_krealloc()
to ensure any extra space is cleared.
Fixes: 95ec3fdf2b ("iio: core: Introduce iio_push_to_buffers_with_ts_unaligned()")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260529121005.1470-1-kimjinseob88%40gmail.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and require it to contain whole register/value entries.
Fixes: 07b241262d ("iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor")
Link: https://lore.kernel.org/r/20260314-iio-proximity-aw96103-fix-firmware-read-v1-1-c74fe9ccd82b@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
adf4377_clk_register() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Similarly, adf4377_clk_register() fills in only parent_data.fw_name,
leaving other members of the clk_parent_data structure uninitialized.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
Fixes: 60e5448ddb ("iio: frequency: adf4377: add clk provider support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The proximity channels were previously defined with 12 realbits.
However, PROXDIFF is read from RegDiffMsb (0x65) and RegDiffLsb
(0x66). The SX9324 datasheet assigns bits 7:0 of each register to
PROXDIFF and documents it as a signed two's-complement value
(Revision 3, Section 8, Table 8, page 43). In contrast, RegOffsetMsb
explicitly marks bits 7:6 as reserved. Thus, PROXDIFF is a 16-bit
signed value.
With realbits = 12, sx_common_read_proximity() uses bit 11 as the
sign bit in sign_extend32(), causing samples outside the 12-bit
signed range to wrap into the [-2048, 2047] range.
Correct the realbits value to 16 to accurately reflect the hardware.
Tested on an SX9324-based device: a phase 0 DIFF readback of 0x7fff
was reported as -1 before this change and as 32767 afterward.
Fixes: 4c18a890df ("iio:proximity:sx9324: Add SX9324 support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Jie <zhangjie14@huaqin.corp-partner.google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The driver performs a sanity check for an array size, when converting a
register value to an array index. The check incorrectly accepts the
sizeof(array) as a last index, when last valid index should be
sizeof(array) - 1.
Fix the check by bailing out when index >= sizeof(array).
Fixes: 7c1d1677b3 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
When BU27034 fails to read gain value at integration-time setting, it
returns 0. This leaves caller unaware of the fact that setting the
integration time failed.
Fix this by returning the relevant error instead of zero.
Fixes: 439c2cef81 ("iio: bu27034: simplify using guard(mutex)")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage.
Fixes: 534674463a ("iio: bm1390: simplify using guard(mutex)")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The BD79703 has adds IIO_CHAN_INFO_SCALE in the info_mask_shared_by_type
so users can read the scale, which depends on the used reference
voltage. This, however, enables users to try writing the scale as well.
This isn't really supported but the bd79703_write_raw() does not check
the mask, and if written scale values pass the validation, the driver
will proceed writing the DAC value when users writes the scale.
Prevent the unsupported scale setting and return an error.
Fixes: af6aca656a ("iio: dac: Support ROHM BD79703 DAC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The bd79124_start_measurement() and bd79124_stop_measurement() ignore
errors from the regmap reads, causing potential use of uninitialized
stack variable when deciding whether the measurement is already
started/stopped. The bd79124_stop_measurement() may also ignore failure
to clear the sequencer state bits, which may make the hardware to ignore
the setting and leave hardware and driver states out of sync.
Check the return value and bail-out if error is detected.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The ROHM BD79124 has pins which can be configured as GPOs or as ADC
inputs. The bd79124gpo_set_multiple() is intended to ensure that a pin
which is requested to be toggled, is indeed configured as a GPO.
The check uses XOR, causing it to fail if mask is not exactly same as
GPO configuration. Eg, if not all GPOs are asked to be toggled at once.
Fix this by checking that mask does not contain pins that are not
configured as GPO, allowing some of the pins which are configured as
GPO to be untouched.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The alarm limit register on BD79124 span to two consecutive registers.
The first register for high-limit containing also hysteresis
configuration. The initialization in driver writes only one 8-bit
register, overwriting the hysteresis and leaving the other limit
register uninitialized.
Fix the limit initialization by using the bd79124_write_int_to_reg(),
which correctly initializes the limit on both of the registers.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The rising alarm is using the cached falling alarm value causing wrong
value to be used.
Fix this by using the correct cached value for rising alarm.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
MAX1363 differential channels are bipolar, but max1363_read_single_chan()
masks the raw value to the ADC resolution without sign-extending it.
Negative differential readings are therefore reported to userspace as
large positive values (e.g. -1 as 4095 on a 12-bit part).
Sign-extend the masked value from the resolution bit for differential
channels. Single-ended channels are unipolar and are left unchanged.
Fixes: d1325cf450 ("Staging: IIO: max1363 ADC driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the
STATUS1 event bits, so a value of 25 left out the highest event bit,
ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported.
Bump the value to 26 so bit 25 is scanned.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Current channels used scan_index "num" and voltage "num + 1", so with
phases 0, 1 and 2 the indices overlapped and no longer matched the
IA=0, VA=1, IB=2, VB=3, IC=4, VC=5 layout expected by
ade9000_waveform_buffer_config(). Phase B and C buffers were configured
incorrectly.
Use "num * 2" for current and "num * 2 + 1" for voltage to get the
non-overlapping 0/1, 2/3, 4/5 layout.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The IRQ handlers do SPI register accesses, but the interrupts were
requested before the vdd regulator was enabled. An interrupt arriving
while the chip is unpowered runs a handler against a dead chip, causing
SPI errors or garbage reads.
Request the interrupts after enabling the regulator. This keeps irq1
registered before ade9000_reset(), which waits on it, and lets devm free
the interrupts before the regulator is disabled.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend.
Fixes: 7ecb8ee5c9 ("iio: adc: adi-axi-adc: support digital interface calibration")
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The threaded IRQ handler queues data->work through irq_work_queue() so
the trigger is polled from a per-CPU context. free_irq() does not flush
an irq_work the handler already queued, so after gp2ap020a00f_remove()
returns that work may still run and call iio_trigger_poll() on data->trig,
which the devm cleanup has already freed, causing a use-after-free.
Add irq_work_sync(&data->work) after free_irq() in remove() and in the
probe error path, mirroring commit 78601726d4 ("iio: trigger: sysfs:
fix use-after-free on remove").
Found by an in-house static analysis tool, confirmed by manual review.
Fixes: bf29fbeaa1 ("iio: gp2ap020a00f: Add a driver for the device")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table.
Fixes: 10b40ffba2 ("iio: pressure: bmp280: Add more tunable config parameters for BMP380")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handler and return early
unless it reports a FIFO sample is ready. Because FIFO_RDY is the only
interrupt source enabled in max30102_chip_init(), an invocation of
max30102_interrupt_handler() without the FIFO_RDY interrupt status bit
set carries no data to read and can return before touching
active_scan_mask. A negative return from max30102_fifo_count()
indicates a failed interrupt status read and is treated the same way.
Fixes: 90579b69e9 ("iio: health: max30102: Add MAX30105 support")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Marco Chen <marcochen.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Sang-Heon Jeon <ekffu200098@gmail.com> has cleaned up a number
of the semantic patches in the scripts/coccinelle directory,
particularly with respect to functions that no longer exist in
the kernel. He and I have also done some reorganizations that
improve performance.
I eliminatd some false positives.
相浦彰 / AIURA，AKIRA <akira.aiura.bj@hitachi.com> fixed an
out of date URL.
-----BEGIN PGP SIGNATURE-----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=AgiL
-----END PGP SIGNATURE-----
Merge tag 'cocci-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull Coccinelle updates from Julia Lawall:
- Clean up a number of the semantic patches in the scripts/coccinelle
directory, particularly with respect to functions that no longer
exist in the kernel (Sang-Heon Jeon)
He and I have also done some reorganizations that improve
performance.
- Eliminate some false positives (me)
- Fix an out of date URL (相浦彰)
* tag 'cocci-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: ifnulldev_put: update error message
coccinelle: ifnulldev_put: update outdated helper names
coccinelle: atomic_as_refcounter: drop atomic_long_dec_and_lock
coccinelle: kfree_mismatch: drop vmalloc_exec
coccinelle: pool_zalloc-simple: drop the pci_pool_alloc rules
coccinelle: zalloc-simple: drop the kmem_alloc rules
coccinelle: alloc_cast: drop removed allocators
coccinelle: remove obsolete pci_free_consistent.cocci
scripts: coccinelle: devm_free: reduce false positives
coccinelle: misc: struct_size: drop unneeded parentheses
coccinelle: mini_lock: improve performance when searching loops
coccinelle: api: check for macro context
coccinelle: update Coccinelle website URL
coccinelle: misc: minmax: avoid unhelpful isomorphisms
coccinelle: misc: minmax: check for the presence of if cases
coccinelle: misc: minmax: drop unneeded parentheses
coccinelle: misc: minmax: improve performance when no candidate exists
coccinelle: double_lock: improve performance when no double lock exists
Add myself to CREDITS because apparently I've never done that; and
update mailmap so that all my old email addresses get remapped to the
kernel.org redirector.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
specific timex.h header. (Thomas Weißschuh)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eGi8
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
- Fix UM build regression caused by the removal of the UM
specific timex.h header (Thomas Weißschuh)
* tag 'timers-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
um: Use asm-generic/timex.h over the host architecture one
in the subtle limitations & fragility of guards (again...) and
caused a regression (Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EtPf
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
- Revert a commit to spinlock cleanup guards that got caught up
in the subtle limitations & fragility of guards (again...) and
caused a regression (Peter Zijlstra)
* tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Revert switching guards to _irq_{disable,enable}()
Toolchain and infrastructure:
- Fix KCFI failures, such as in Rust doctests, by disabling function
merging when CFI is enabled. Gary reported the LLVM bug to upstream
and it is now fixed in their mainline.
- Fix 'objtool' fallthrough warnings under the experimental
'CONFIG_RUST_INLINE_HELPERS' by passing (for the combined Rust and
helpers code) the LLVM options needed to preserve the unreachable
traps that 'rustc' normally emits.
In addition, fix 'objtool' errors when LTO is enabled on top, by
also filtering out the LTO flags (for the combined Rust and helpers
code) so that the traps are kept in place.
- Fix 'objtool' warnings by adding one more 'noreturn' function.
- Fix 'make rusttest' target when the 'rustc-dev' component is
installed and Rust >= 1.82.0, <= 1.87.0 is used.
'kernel' crate:
- 'num' module: fix soundness issue in the 'Bounded' conversion from
'bool' by restricting the conversions to unsigned 'Bounded'.
- 'jump_label' module: fix future 'make rusttest' target failures when
'ARCH=' is set to an arch different than the host's.
- 'list' module: fix incorrect 'pop_back()' comment.
-----BEGIN PGP SIGNATURE-----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=EBLX
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix KCFI failures, such as in Rust doctests, by disabling function
merging when CFI is enabled. Gary reported the LLVM bug to upstream
and it is now fixed in their mainline.
- Fix 'objtool' fallthrough warnings under the experimental
'CONFIG_RUST_INLINE_HELPERS' by passing (for the combined Rust and
helpers code) the LLVM options needed to preserve the unreachable
traps that 'rustc' normally emits.
In addition, fix 'objtool' errors when LTO is enabled on top, by
also filtering out the LTO flags (for the combined Rust and helpers
code) so that the traps are kept in place.
- Fix 'objtool' warnings by adding one more 'noreturn' function.
- Fix 'make rusttest' target when the 'rustc-dev' component is
installed and Rust >= 1.82.0, <= 1.87.0 is used.
'kernel' crate:
- 'num' module: fix soundness issue in the 'Bounded' conversion from
'bool' by restricting the conversions to unsigned 'Bounded'.
- 'jump_label' module: fix future 'make rusttest' target failures
when 'ARCH=' is set to an arch different than the host's.
- 'list' module: fix incorrect 'pop_back()' comment"
* tag 'rust-fixes-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: disambiguate `zerocopy_derive` for `rusttest`
rust: num: restrict bool conversion to unsigned Bounded
kbuild: rust: keep Rust objects out of Clang LTO with inline helpers
kbuild: rust: preserve unreachable traps with inline helpers
rust: cfi: disable function merging if CFI is enabled
rust: jump_label: skip arch-specific asm in `testlib` builds
objtool/rust: add one more `noreturn` Rust function
rust: kernel: list: fix incorrect pop_back example comment
- add module description for kprobes testing module
- remove references to CONFIG_CPU_ARM92x_CPU_IDLE options
- expand comment in ARM's __switch_to()
Also a number of fixes that missed 7.2:
- disable broken eBPF on RiscPC
- more BKPT fixes (guys, it's a *very* bad idea when everyone uses
the BKPT instruction for their own differing purposes.)
- another preempt-rt fix, this time for siglock / CPU timers
- fix another path where we try to send signals to processes
with interrupts disabled
- acquire mmap write lock for show_pte() with user faults
-----BEGIN PGP SIGNATURE-----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=KcxS
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull arm updates from Russell King:
"Updates for 7.3:
- add module description for kprobes testing module
- remove references to CONFIG_CPU_ARM92x_CPU_IDLE options
- expand comment in ARM's __switch_to()
Also a number of fixes that missed 7.2:
- disable broken eBPF on RiscPC
- more BKPT fixes (guys, it's a *very* bad idea when everyone uses
the BKPT instruction for their own differing purposes)
- another preempt-rt fix, this time for siglock / CPU timers
- fix another path where we try to send signals to processes with
interrupts disabled
- acquire mmap write lock for show_pte() with user faults"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9480/1: entry: expand comment in __switch_to
ARM: 9478/1: Remove references to removed CONFIG_CPU_ARM92x_CPU_IDLE options
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
ARM: 9481/2: breakpoint: CFI breakpoints only on demand
ARM: 9477/1: Disable broken eBPF JIT on the Risc PC
ARM: 9473/1: kprobes: test: add MODULE_DESCRIPTION
One small item and one bug fix.
* The bug fix is to fix an unchecked access in our or1k_atomic syscall,
I am debating if we should just deprecate this as there is minimal
need for it.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmqSfncACgkQw7McLV5m
J+TprRAAuyxaYmmnTQqJacQt8OEaVJ5DPsZfCtENwEg9BkXpvzo1F/uK4Enp+YEf
VABscIWCAEKY2BCbn6TYdq6uDAHg9GY0fRUcJ7ERUH9pZt7RD24R6uP0oTIffYL4
wzD5E7DOkVdKHrw5KHB75K4BTPgHPLK2aJxhnS9eX/tYS2yDLQNyFvH5OxZ/uezp
6wJlZhdSdcTTNNBu/ZLj0YHa/22RixqxWHB0Wax061LU4QFjbYo8qufSA1sdP5Do
qz/zjW6fr6ieJOwNKsM6n9BLcCS1OqTNKRrWUbxUYqeni8jX2qXWxnwjOK0RrXH2
nmraEviXMrYGg29BIi914nG1uePp0MeX8LE2+GrBQ8iEMmnJeVk+TDNqGiXT4Zg1
1NTeQaGDJu2aggPlNC2DnnJyKb7KkTceBcpBC1amUco6co7m+TbFzcnqpUcTsVSu
HhH72NGnKmY7aFuMaw6Apl6pqw8C38moXhDo45XkucQzRQJADlIkm4amm8gV+MFk
ivP6OMuW4I08DxUlZw/thUdG6qMXVUKCrVqlohjQFXNKuFeHJM+rfJFXGnEmoSCW
AkFtgCH2wMDcW5BsM1d3YV3Bj4OFYR/YaElx0T83fcTUvGNbwdFQOlmGy06Jo2Hj
Vr/5pvoYbTUdL0uJMLPEG6mZuB5LmW5K4ktGTMTPosunXRQipIk=
=DkYR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"One small trivial macro cleanup and one bug fix.
The bug fix is to fix an unchecked access in our or1k_atomic syscall,
I am debating if we should just deprecate this as there is minimal
need for it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
openrisc: drop unneeded semicolon
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out the
name of the instance that failed, it prints "(null)". That is because it
prints "cur_str" that had already been processed by strsep(). Print the
saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events. But
if the named histogram has a variable attached, the second event that uses
the named histogram which duplicates it and needs to free the original
after duplication leaves the old variable in place and still visible. If
another histogram uses than variable, it will use the stale one which will
try to reference the freed duplicate histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check if it
succeeded in creating a kthread. If the kthread creation were to fail, the
code will still try to call kthread_stop() on the error returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update the
ring buffer sub-buffer size, can cause the trace_pipe read to read stale
data. Add trace_access_lock() around updating the ring buffer sub-buffer
size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which calls
free_ei(). The free_ei() will test if eventfs_inode being freed has no
children. It is a bug if it does. But on the failure case of the creation
of the "events" directory, the children lists have not yet been
initialized and the free will trigger a warning because list_empty() on an
uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and makes
sure that a created eventfs_inode has its lists initialized upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does not
test the return of kthread_run() to see if it succeeds. Return a failure
if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state. It
makes a copy of it then updates the child's pointer to it. But if the
allocation fails, the duplication function leaves the child with a pointer
to its parent's descriptor. When the child cleans up its data, it will free
the parent's descriptor while the parent is still using it.
In the duplication function, set the child's user_event_mm to NULL before
testing if the allocation succeeded, and when it exits it will not free
the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a failed
replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and exits
with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it triggers
a WARN_ON_ONCE() and continues normally. Instead, have it exit with an
error and a pr_warn() print instead of a full WARNING.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCapOC3hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvjkAQCGVuyK980rwiBnfenWLpeB3QjfHA8B
mV0mJSlGWm1t1gEA9WWzMGbp+OHeRV2xyA+xW7OS1S58VO9OIGrzXCGqbAM=
=TrF5
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
dev_put_track() and dev_hold_track() were renamed to netdev_put() and
netdev_hold() by commit d62607c3fe ("net: rename reference+tracking
helpers").
So update the names.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
atomic_long_dec_and_lock() has never existed. So drop it from the rules.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
vmalloc_exec() was removed by commit 7a0e27b2a0 ("mm: remove
vmalloc_exec").
So drop it from the rules.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
pci_pool_alloc() and pci_pool_zalloc() were removed by commit
88dee3b0ef ("PCI: Remove unused pci_pool wrappers").
So drop the pci_pool_alloc rules.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS. The remaining
changes are either bug fixes or hardening.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=tfy0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi
Pull more SCSI updates from Martin Petersen:
"Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS.
The remaining changes are either bug fixes or hardening"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: (26 commits)
scsi: snic: Fix SCSI host leak on workqueue allocation failure
scsi: MAINTAINERS: Update my email address
scsi: MAINTAINERS: Leave the cumana_1 and oak drivers to the RISCPC maintainers
scsi: leapraid: Standardize NCQ priority sysfs attributes
scsi: leapraid: Serialize firmware log mmap with teardown
scsi: leapraid: Balance host references for firmware log VMAs
scsi: lpfc: Remove unnnecessary NULL check
scsi: qla2xxx: Fix an loop timeout test
scsi: qla2xxx: Fix an error code in qla_get_tmf()
scsi: ibmvfc: Fix use of uninitialized rport in ibmvfc_do_work()
scsi: core: Enable context analysis for hosts.o
scsi: lpfc: Replace strlcat() with sysfs_emit_at() in the sysfs show functions
scsi: lpfc: Replace strlcat() with seq_buf in the debugfs dump helpers
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_rx_monitor_report()
scsi: lpfc: Replace strlcat() with scnprintf() in lpfc_vport_symbolic_node_name()
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_info()
scsi: core: Enable context analysis
scsi: core: Protect host state changes with the host lock
scsi: core: Add lock context annotations
scsi: core: Pass the SCSI host pointer directly to scanning functions
...
