[ Upstream commit eb74c19fe1 ]
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b096c137 ]
Before accessing the disk_bytenr field of a file extent item we need
to check if we are dealing with an inline extent.
This is because for inline extents their data starts at the offset of
the disk_bytenr field. So accessing the disk_bytenr
means we are accessing inline data or in case the inline data is less
than 8 bytes we can actually cause an invalid
memory access if this inline extent item is the first item in the leaf
or access metadata from other items.
Fixes: 82bfb2e7b6 ("Btrfs: incremental send, fix unnecessary hole writes for sparse files")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32b63acd78 ]
Commit efa5630590 ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
added ttag bounds checking and data_offset
validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate
whether the command's data structures (cmd->req.sg and cmd->iov) have
been properly initialized before processing H2C_DATA PDUs.
The nvmet_tcp_build_pdu_iovec() function dereferences these pointers
without NULL checks. This can be triggered by sending H2C_DATA PDU
immediately after the ICREQ/ICRESP handshake, before
sending a CONNECT command or NVMe write command.
Attack vectors that trigger NULL pointer dereferences:
1. H2C_DATA PDU sent before CONNECT → both pointers NULL
2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL
3. H2C_DATA PDU for uninitialized command slot → both pointers NULL
The fix validates both cmd->req.sg and cmd->iov before calling
nvmet_tcp_build_pdu_iovec(). Both checks are required because:
- Uninitialized commands: both NULL
- READ commands: cmd->req.sg allocated, cmd->iov NULL
- WRITE commands: both allocated
Fixes: efa5630590 ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1979778e9 ]
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open().
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Reported-by: syzbot+e8cb6691a7cf68256cb8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e8cb6691a7cf68256cb8
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251223011732.39361-1-swilczek.lx@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54b603f2db ]
Due to commit 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove
division"), the logic for energy consumption calculation has been modified.
The actual calculation of cost is 10 * power * max_frequency / frequency
instead of power * max_frequency / frequency.
Therefore, the comment for cost has been updated to reflect the correct
content.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added Fixes: tag ]
Link: https://patch.msgid.link/20251230061534.816894-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a0cff455 ]
Some of the warnings need to be reordered between these two functions
in order to be correct. This has happened multiple times.
Merging them solves this problem once and for all.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260107152059.3048329-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a74af51c3 ]
In bl_parse_scsi(), if the block device length is zero, the function
returns immediately without releasing the file reference obtained via
bl_open_path(), leading to a memory leak.
Fix this by jumping to the out_blkdev_put label to ensure the file
reference is properly released.
Fixes: d76c769c8d ("pnfs/blocklayout: Don't add zero-length pnfs_block_dev")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c72808365 ]
In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails,
the function jumps to the out_scratch label without freeing the already
allocated dsaddrs list, leading to a memory leak.
Fix this by jumping to the out_err_drain_dsaddrs label, which properly
frees the dsaddrs list before cleaning up other resources.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cce0be6eb4 ]
Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery
waiting on kthreadd, which is attempting to reclaim memory by calling
nfs_release_folio(). The latter cannot make progress due to state
recovery being needed.
It seems that the only safe thing to do here is to kick off a writeback
of the folio, without waiting for completion, or else kicking off an
asynchronous commit.
Reported-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Fixes: 96780ca55e ("NFS: fix up nfs_release_folio() to try to release the page")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857bf90562 ]
Ben Coddington reports seeing a hang in the following stack trace:
0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415
1 [ffffd0b50e177548] schedule at ffffffff9ca05717
2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1
3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb
4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5
5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4]
6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4]
7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4]
8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4]
9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4]
10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4]
11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4]
12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4]
13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4]
14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4]
15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4]
16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4]
17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea
18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e
19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935
The issue is that the delegreturn is being asked to wait for a layout
return that cannot complete because a state recovery was initiated. The
state recovery cannot complete until the open() finishes processing the
delegations it was given.
The solution is to propagate the existing flags that indicate a
non-blocking call to the function pnfs_roc(), so that it knows not to
wait in this situation.
Reported-by: Benjamin Coddington <bcodding@hammerspace.com>
Fixes: 29ade5db12 ("pNFS: Wait on outstanding layoutreturns to complete in pnfs_roc()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c196def07b ]
The XFRM_STATE_NOPMTUDISC flag is only meaningful for output SAs, but
it was being applied regardless of the SA direction when the sysctl
ip_no_pmtu_disc is enabled. This can unintentionally affect input SAs.
Limit setting XFRM_STATE_NOPMTUDISC to output SAs when the SA direction
is configured.
Closes: https://github.com/strongswan/strongswan/issues/2946
Fixes: a4a87fa4e9 ("xfrm: Add Direction to the SA in or out")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d5221af9c ]
Commit 61fafbee6c ("xfrm: Determine inner GSO type from packet inner
protocol") attempted to fix GSO segmentation by reading the inner
protocol from XFRM_MODE_SKB_CB(skb)->protocol. This was incorrect
because the field holds the inner L4 protocol (TCP/UDP) instead of the
required tunnel protocol. Also, the memory location (shared by
XFRM_SKB_CB(skb) which could be overwritten by xfrm_replay_overflow())
is prone to corruption. This combination caused the kernel to select
the wrong inner mode and get the wrong address family.
The correct value is in xfrm_offload(skb)->proto, which is set from
the outer tunnel header's protocol field by esp[4|6]_gso_encap(). It
is initialized by xfrm[4|6]_tunnel_encap_add() to either IPPROTO_IPIP
or IPPROTO_IPV6, using xfrm_af2proto() and correctly reflects the
inner packet's address family.
Fixes: 61fafbee6c ("xfrm: Determine inner GSO type from packet inner protocol")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 120f3e6ff7 upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fix the inverted hw_init flag which was set to false instead of true
after initialisation which defeats its purpose and may result in
repeated unnecessary initialisation.
Similarly, the initial state of the flag was also inverted so that the
codec would only be initialised and brought out of regmap cache only
mode if its status first transitions to UNATTACHED.
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Cc: stable@vger.kernel.org # 6.5
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b45f721775 upstream.
When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in
response to a guest WRMSR, clear XFD-disabled features in the saved (or to
be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for
features that are disabled via the guest's XFD. Because the kernel
executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1
will cause XRSTOR to #NM and panic the kernel.
E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
Modules linked in: kvm_intel kvm irqbypass
CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
switch_fpu_return+0x4a/0xb0
kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1,
and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's
call to fpu_update_guest_xfd().
and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
Modules linked in: kvm_intel kvm irqbypass
CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
fpu_swap_kvm_fpstate+0x6b/0x120
kvm_load_guest_fpu+0x30/0x80 [kvm]
kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The new behavior is consistent with the AMX architecture. Per Intel's SDM,
XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD
(and non-compacted XSAVE saves the initial configuration of the state
component):
If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i,
the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1;
instead, it operates as if XINUSE[i] = 0 (and the state component was
in its initial state): it saves bit i of XSTATE_BV field of the XSAVE
header as 0; in addition, XSAVE saves the initial configuration of the
state component (the other instructions do not save state component i).
Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using
a constant XFD based on the set of enabled features when XSAVEing for
a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled
features can only happen in the above interrupt case, or in similar
scenarios involving preemption on preemptible kernels, because
fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the
outgoing FPU state with the current XFD; and that is (on all but the
first WRMSR to XFD) the guest XFD.
Therefore, XFD can only go out of sync with XSTATE_BV in the above
interrupt case, or in similar scenarios involving preemption on
preemptible kernels, and it we can consider it (de facto) part of KVM
ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 820a6ee944 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 469d71512d upstream.
This reverts commit 8a157e0a0a.
That commit incorrectly assumed that the bio_chain() arguments were
swapped in gfs2. However, gfs2 intentionally constructs bio chains so
that the first bio's bi_end_io callback is invoked when all bios in the
chain have completed, unlike bio chains where the last bio's callback is
invoked.
Fixes: 8a157e0a0a ("gfs2: Fix use of bio_chain")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7f1b4bdc7 upstream.
The return value calculation was incorrect: `return len - buf_size;`
Initially `len = buf_size`, then `len` decreases with each operation.
This results in a negative return value on success.
Fix by returning `buf_size - len` which correctly calculates the actual
number of bytes written.
Fixes: a976d790f4 ("efi/cper: Add a new helper function to print bitmasks")
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff3f9913bc upstream.
mu_resource_id is referenced in imx_scu_irq_get_status() and
imx_scu_irq_group_enable() which could be used by other modules, so
need to set correct value before using imx_sc_irq_ipc_handle in
SCU API call.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes: 81fb53feb6 ("firmware: imx: scu-irq: Init workqueue before request mbox channel")
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f9ee5fc97 upstream.
Fix a memory leak in bpf_prog_test_run_xdp() where the context buffer
allocated by bpf_ctx_init() is not freed when the function returns early
due to a data size check.
On the failing path:
ctx = bpf_ctx_init(...);
if (kattr->test.data_size_in - meta_sz < ETH_HLEN)
return -EINVAL;
The early return bypasses the cleanup label that kfree()s ctx, leading to a
leak detectable by kmemleak under fuzzing. Change the return to jump to the
existing free_ctx label.
Fixes: fe9544ed1a ("bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN")
Reported-by: BPF Runtime Fuzzer (BRF)
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20251014120037.1981316-1-shardulsb08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 161a0c617a upstream.
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e9722e9a7 upstream.
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d67396c9d6 ]
A race condition exists between the read loop and IRQ `complete()` call.
An interrupt could call the complete() between the inner loop and
reinit_completion(), potentially losing the completion event and causing
an unnecessary timeout. Moving reinit_completion() before the loop
prevents this. A premature signal will only result in a spurious wakeup
and another wait cycle, which is preferable to waiting for a timeout.
Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com>
Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-1-396079972f2a@nokia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e16776542 ]
A race condition was found in sg_proc_debug_helper(). It was observed on
a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring
/proc/scsi/sg/debug every second. A very large elapsed time would
sometimes appear. This is caused by two race conditions.
We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64
architecture. A patched kernel was built, and the race condition could
not be observed anymore after the application of this patch. A
reproducer C program utilising the scsi_debug module was also built by
Changhui Zhong and can be viewed here:
https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c
The first race happens between the reading of hp->duration in
sg_proc_debug_helper() and request completion in sg_rq_end_io(). The
hp->duration member variable may hold either of two types of
information:
#1 - The start time of the request. This value is present while
the request is not yet finished.
#2 - The total execution time of the request (end_time - start_time).
If sg_proc_debug_helper() executes *after* the value of hp->duration was
changed from #1 to #2, but *before* srp->done is set to 1 in
sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the
elapsed time (value type #2) is subtracted from a timestamp, which
cannot yield a valid elapsed time (which is a type #2 value as well).
To fix this issue, the value of hp->duration must change under the
protection of the sfp->rq_list_lock in sg_rq_end_io(). Since
sg_proc_debug_helper() takes this read lock, the change to srp->done and
srp->header.duration will happen atomically from the perspective of
sg_proc_debug_helper() and the race condition is thus eliminated.
The second race condition happens between sg_proc_debug_helper() and
sg_new_write(). Even though hp->duration is set to the current time
stamp in sg_add_request() under the write lock's protection, it gets
overwritten by a call to get_sg_io_hdr(), which calls copy_from_user()
to copy struct sg_io_hdr from userspace into kernel space. hp->duration
is set to the start time again in sg_common_write(). If
sg_proc_debug_helper() is called between these two calls, an arbitrary
value set by userspace (usually zero) is used to compute the elapsed
time.
To fix this issue, hp->duration must be set to the current timestamp
again after get_sg_io_hdr() returns successfully. A small race window
still exists between get_sg_io_hdr() and setting hp->duration, but this
window is only a few instructions wide and does not result in observable
issues in practice, as confirmed by testing.
Additionally, we fix the format specifier from %d to %u for printing
unsigned int values in sg_proc_debug_helper().
Signed-off-by: Michal Rábek <mrabek@redhat.com>
Suggested-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ed688792 ]
Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
unexpected behavior
Fix this by adding missing writable register defaults.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cb8ef037 ]
Add a DMI quirk for the Honor MagicBook X16 2025 laptop
fixing the issue where the internal microphone was
not detected.
Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com>
Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d5602236f ]
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/b9653191-d479-4c8b-8536-1326d028db5c@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 969faea4e9 ]
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e7143e5e6)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c04b77f87 ]
This driver is migrated to use threaded IRQ since commit 5972eb05ca
("spi: spi-mt65xx: Use threaded interrupt for non-SPIMEM transfer"), and
we almost always want to disable the interrupt line to avoid excess
interrupts while the threaded handler is processing SPI transfer.
Use IRQF_ONESHOT for that purpose.
In practice, we see MediaTek devices show SPI transfer timeout errors
when communicating with ChromeOS EC in certain scenarios, and with
IRQF_ONESHOT, the issue goes away.
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://patch.msgid.link/20251217101131.1975131-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3886b198bd ]
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf5e396957)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba624ba88d ]
According to a user report, the ST2000DM008-2FR102 has problems with LPM.
Reported-by: Emerson Pinter <e@pinter.dev>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220693
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e1a1bc4f5 ]
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location.
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Closes: https://lore.kernel.org/netfilter-devel/20251118221735.GA5477@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Tested-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efc4c35b74 ]
Fix inconsistent error handling for sscanf() return value check.
Implicit boolean conversion is used instead of explicit return
value checks. The code checks if (!sscanf(...)) which is incorrect
because:
1. sscanf returns the number of successfully parsed items
2. On success, it returns 1 (one item passed)
3. On failure, it returns 0 or EOF
4. The check 'if (!sscanf(...))' is wrong because it treats
success (1) as failure
All occurrences of sscanf() now uses explicit return value check.
With this behavior it returns '-EINVAL' when parsing fails (returns
0 or EOF), and continues when parsing succeeds (returns 1).
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251207151549.202452-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bda1910c4 ]
The device becomes visible to userspace via device_register()
even before it fully initialized by idr_init(). If userspace
or another thread tries to register a zone immediately after
device_register(), the control_type_valid() will fail because
the control_type is not yet in the list. The IDR is not yet
initialized, so this race condition causes zone registration
failure.
Move idr_init() and list addition before device_register()
fix the race condition.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject adjustment, empty line added ]
Link: https://patch.msgid.link/20251205190216.5032-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71cfa7c893 ]
Some Potron SFP+ XGSPON ONU sticks are shipped with different EEPROM
vendor ID and vendor name strings, but are otherwise functionally
identical to the existing "Potron SFP+ XGSPON ONU Stick" handled by
sfp_quirk_potron().
These modules, including units distributed under the "Better Internet"
branding, use the same UART pin assignment and require the same
TX_FAULT/LOS behaviour and boot delay. Re-use the existing Potron
quirk for this EEPROM variant.
Signed-off-by: Marcus Hughes <marcus.hughes@betterinternet.ltd>
Link: https://patch.msgid.link/20251207210355.333451-1-marcus.hughes@betterinternet.ltd
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec69daabe4 ]
syzbot is reporting
unregister_netdevice: waiting for sit0 to become free. Usage count = 2
problem. A debug printk() patch found that a refcount is obtained at
xdp_convert_md_to_buff() from bpf_prog_test_run_xdp().
According to commit ec94670fcb ("bpf: Support specifying ingress via
xdp_md context in BPF_PROG_TEST_RUN"), the refcount obtained by
xdp_convert_md_to_buff() will be released by xdp_convert_buff_to_md().
Therefore, we can consider that the error handling path introduced by
commit 1c19499825 ("bpf: introduce frags support to
bpf_prog_test_run_xdp()") forgot to call xdp_convert_buff_to_md().
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: 1c19499825 ("bpf: introduce frags support to bpf_prog_test_run_xdp()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/af090e53-9d9b-4412-8acb-957733b3975c@I-love.SAKURA.ne.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e558cca217 ]
The xdp_frame structure takes up part of the XDP frame headroom,
limiting the size of the metadata. However, in bpf_test_run, we don't
take this into account, which makes it possible for userspace to supply
a metadata size that is too large (taking up the entire headroom).
If userspace supplies such a large metadata size in live packet mode,
the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call
will fail, after which packet transmission proceeds with an
uninitialised frame structure, leading to the usual Bad Stuff.
The commit in the Fixes tag fixed a related bug where the second check
in xdp_update_frame_from_buff() could fail, but did not add any
additional constraints on the metadata size. Complete the fix by adding
an additional check on the metadata size. Reorder the checks slightly to
make the logic clearer and add a comment.
Link: https://lore.kernel.org/r/fa2be179-bad7-4ee3-8668-4903d1853461@hust.edu.cn
Fixes: b6f1f780b3 ("bpf, test_run: Fix packet size check for live packet mode")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260105114747.1358750-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9544ed1a ]
To test bpf_xdp_pull_data(), an xdp packet containing fragments as well
as free linear data area after xdp->data_end needs to be created.
However, bpf_prog_test_run_xdp() always fills the linear area with
data_in before creating fragments, leaving no space to pull data. This
patch will allow users to specify the linear data size through
ctx->data_end.
Currently, ctx_in->data_end must match data_size_in and will not be the
final ctx->data_end seen by xdp programs. This is because ctx->data_end
is populated according to the xdp_buff passed to test_run. The linear
data area available in an xdp_buff, max_linear_sz, is alawys filled up
before copying data_in into fragments.
This patch will allow users to specify the size of data that goes into
the linear area. When ctx_in->data_end is different from data_size_in,
only ctx_in->data_end bytes of data will be put into the linear area when
creating the xdp_buff.
While ctx_in->data_end will be allowed to be different from data_size_in,
it cannot be larger than the data_size_in as there will be no data to
copy from user space. If it is larger than the maximum linear data area
size, the layout suggested by the user will not be honored. Data beyond
max_linear_sz bytes will still be copied into fragments.
Finally, since it is possible for a NIC to produce a xdp_buff with empty
linear data area, allow it when calling bpf_test_init() from
bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such
xdp_buff. This is done by moving lower-bound check to callers as most of
them already do except bpf_prog_test_run_skb(). The change also fixes a
bug that allows passing an xdp_buff with data < ETH_HLEN. This can
happen when ctx is used and metadata is at least ETH_HLEN.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com
Stable-dep-of: e558cca217 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eb83bff02 ]
Change the variable naming in bpf_prog_test_run_xdp() to make the
overall logic less confusing. As different modes were added to the
function over the time, some variables got overloaded, making
it hard to understand and changing the code becomes error-prone.
Replace "size" with "linear_sz" where it refers to the size of metadata
and data. If "size" refers to input data size, use test.data_size_in
directly.
Replace "max_data_sz" with "max_linear_sz" to better reflect the fact
that it is the maximum size of metadata and data (i.e., linear_sz). Also,
xdp_rxq.frags_size is always PAGE_SIZE, so just set it directly instead
of subtracting headroom and tailroom and adding them back.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-6-ameryhung@gmail.com
Stable-dep-of: e558cca217 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fc012daf9 ]
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL
In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().
To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: e558cca217 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9e3b22ddf ]
[BUG]
For the following write sequence with 64K page size and 4K fs block size,
it will lead to file extent items to be inserted without any data
checksum:
mkfs.btrfs -s 4k -f $dev > /dev/null
mount $dev $mnt
xfs_io -f -c "pwrite 0 16k" -c "pwrite 32k 4k" -c pwrite "60k 64K" \
-c "truncate 16k" $mnt/foobar
umount $mnt
This will result the following 2 file extent items to be inserted (extra
trace point added to insert_ordered_extent_file_extent()):
btrfs_finish_one_ordered: root=5 ino=257 file_off=61440 num_bytes=4096 csum_bytes=0
btrfs_finish_one_ordered: root=5 ino=257 file_off=0 num_bytes=16384 csum_bytes=16384
Note for file offset 60K, we're inserting a file extent without any
data checksum.
Also note that range [32K, 36K) didn't reach
insert_ordered_extent_file_extent(), which is the correct behavior as
that OE is fully truncated, should not result any file extent.
Although file extent at 60K will be later dropped by btrfs_truncate(),
if the transaction got committed after file extent inserted but before
the file extent dropping, we will have a small window where we have a
file extent beyond EOF and without any data checksum.
That will cause "btrfs check" to report error.
[CAUSE]
The sequence happens like this:
- Buffered write dirtied the page cache and updated isize
Now the inode size is 64K, with the following page cache layout:
0 16K 32K 48K 64K
|/////////////| |//| |//|
- Truncate the inode to 16K
Which will trigger writeback through:
btrfs_setsize()
|- truncate_setsize()
| Now the inode size is set to 16K
|
|- btrfs_truncate()
|- btrfs_wait_ordered_range() for [16K, u64(-1)]
|- btrfs_fdatawrite_range() for [16K, u64(-1)}
|- extent_writepage() for folio 0
|- writepage_delalloc()
| Generated OE for [0, 16K), [32K, 36K] and [60K, 64K)
|
|- extent_writepage_io()
Then inside extent_writepage_io(), the dirty fs blocks are handled
differently:
- Submit write for range [0, 16K)
As they are still inside the inode size (16K).
- Mark OE [32K, 36K) as truncated
Since we only call btrfs_lookup_first_ordered_range() once, which
returned the first OE after file offset 16K.
- Mark all OEs inside range [16K, 64K) as finished
Which will mark OE ranges [32K, 36K) and [60K, 64K) as finished.
For OE [32K, 36K) since it's already marked as truncated, and its
truncated length is 0, no file extent will be inserted.
For OE [60K, 64K) it has never been submitted thus has no data
checksum, and we insert the file extent as usual.
This is the root cause of file extent at 60K to be inserted without
any data checksum.
- Clear dirty flags for range [16K, 64K)
It is the function btrfs_folio_clear_dirty() which searches and clears
any dirty blocks inside that range.
[FIX]
The bug itself was introduced a long time ago, way before subpage and
large folio support.
At that time, fs block size must match page size, thus the range
[cur, end) is just one fs block.
But later with subpage and large folios, the same range [cur, end)
can have multiple blocks and ordered extents.
Later commit 18de34daa7 ("btrfs: truncate ordered extent when skipping
writeback past i_size") was fixing a bug related to subpage/large
folios, but it's still utilizing the old range [cur, end), meaning only
the first OE will be marked as truncated.
The proper fix here is to make EOF handling block-by-block, not trying
to handle the whole range to @end.
By this we always locate and truncate the OE for every dirty block.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46a2390859 ]
Instead of repeating the expression "start + len" multiple times, store it
in a variable and use it where needed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 18de34daa7 ]
While running test case btrfs/192 from fstests with support for large
folios (needs CONFIG_BTRFS_EXPERIMENTAL=y) I ended up getting very sporadic
btrfs check failures reporting that csum items were missing. Looking into
the issue it turned out that btrfs check searches for csum items of a file
extent item with a range that spans beyond the i_size of a file and we
don't have any, because the kernel's writeback code skips submitting bios
for ranges beyond eof. It's not expected however to find a file extent item
that crosses the rounded up (by the sector size) i_size value, but there is
a short time window where we can end up with a transaction commit leaving
this small inconsistency between the i_size and the last file extent item.
Example btrfs check output when this happens:
$ btrfs check /dev/sdc
Opening filesystem to check...
Checking filesystem on /dev/sdc
UUID: 69642c61-5efb-4367-aa31-cdfd4067f713
[1/8] checking log skipped (none written)
[2/8] checking root items
[3/8] checking extents
[4/8] checking free space tree
[5/8] checking fs roots
root 5 inode 332 errors 1000, some csum missing
ERROR: errors found in fs roots
(...)
Looking at a tree dump of the fs tree (root 5) for inode 332 we have:
$ btrfs inspect-internal dump-tree -t 5 /dev/sdc
(...)
item 28 key (332 INODE_ITEM 0) itemoff 2006 itemsize 160
generation 17 transid 19 size 610969 nbytes 86016
block group 0 mode 100666 links 1 uid 0 gid 0 rdev 0
sequence 11 flags 0x0(none)
atime 1759851068.391327881 (2025-10-07 16:31:08)
ctime 1759851068.410098267 (2025-10-07 16:31:08)
mtime 1759851068.410098267 (2025-10-07 16:31:08)
otime 1759851068.391327881 (2025-10-07 16:31:08)
item 29 key (332 INODE_REF 340) itemoff 1993 itemsize 13
index 2 namelen 3 name: f1f
item 30 key (332 EXTENT_DATA 589824) itemoff 1940 itemsize 53
generation 19 type 1 (regular)
extent data disk byte 21745664 nr 65536
extent data offset 0 nr 65536 ram 65536
extent compression 0 (none)
(...)
We can see that the file extent item for file offset 589824 has a length of
64K and its number of bytes is 64K. Looking at the inode item we see that
its i_size is 610969 bytes which falls within the range of that file extent
item [589824, 655360[.
Looking into the csum tree:
$ btrfs inspect-internal dump-tree /dev/sdc
(...)
item 15 key (EXTENT_CSUM EXTENT_CSUM 21565440) itemoff 991 itemsize 200
range start 21565440 end 21770240 length 204800
item 16 key (EXTENT_CSUM EXTENT_CSUM 1104576512) itemoff 983 itemsize 8
range start 1104576512 end 1104584704 length 8192
(..)
We see that the csum item number 15 covers the first 24K of the file extent
item - it ends at offset 21770240 and the extent's disk_bytenr is 21745664,
so we have:
21770240 - 21745664 = 24K
We see that the next csum item (number 16) is completely outside the range,
so the remaining 40K of the extent doesn't have csum items in the tree.
If we round up the i_size to the sector size, we get:
round_up(610969, 4096) = 614400
If we subtract from that the file offset for the extent item we get:
614400 - 589824 = 24K
So the missing 40K corresponds to the end of the file extent item's range
minus the rounded up i_size:
655360 - 614400 = 40K
Normally we don't expect a file extent item to span over the rounded up
i_size of an inode, since when truncating, doing hole punching and other
operations that trim a file extent item, the number of bytes is adjusted.
There is however a short time window where the kernel can end up,
temporarily,persisting an inode with an i_size that falls in the middle of
the last file extent item and the file extent item was not yet trimmed (its
number of bytes reduced so that it doesn't cross i_size rounded up by the
sector size).
The steps (in the kernel) that lead to such scenario are the following:
1) We have inode I as an empty file, no allocated extents, i_size is 0;
2) A buffered write is done for file range [589824, 655360[ (length of
64K) and the i_size is updated to 655360. Note that we got a single
large folio for the range (64K);
3) A truncate operation starts that reduces the inode's i_size down to
610969 bytes. The truncate sets the inode's new i_size at
btrfs_setsize() by calling truncate_setsize() and before calling
btrfs_truncate();
4) At btrfs_truncate() we trigger writeback for the range starting at
610304 (which is the new i_size rounded down to the sector size) and
ending at (u64)-1;
5) During the writeback, at extent_write_cache_pages(), we get from the
call to filemap_get_folios_tag(), the 64K folio that starts at file
offset 589824 since it contains the start offset of the writeback
range (610304);
6) At writepage_delalloc() we find the whole range of the folio is dirty
and therefore we run delalloc for that 64K range ([589824, 655360[),
reserving a 64K extent, creating an ordered extent, etc;
7) At extent_writepage_io() we submit IO only for subrange [589824, 614400[
because the inode's i_size is 610969 bytes (rounded up by sector size
is 614400). There, in the while loop we intentionally skip IO beyond
i_size to avoid any unnecessay work and just call
btrfs_mark_ordered_io_finished() for the range [614400, 655360[ (which
has a 40K length);
8) Once the IO finishes we finish the ordered extent by ending up at
btrfs_finish_one_ordered(), join transaction N, insert a file extent
item in the inode's subvolume tree for file offset 589824 with a number
of bytes of 64K, and update the inode's delayed inode item or directly
the inode item with a call to btrfs_update_inode_fallback(), which
results in storing the new i_size of 610969 bytes;
9) Transaction N is committed either by the transaction kthread or some
other task committed it (in response to a sync or fsync for example).
At this point we have inode I persisted with an i_size of 610969 bytes
and file extent item that starts at file offset 589824 and has a number
of bytes of 64K, ending at an offset of 655360 which is beyond the
i_size rounded up to the sector size (614400).
--> So after a crash or power failure here, the btrfs check program
reports that error about missing checksum items for this inode, as
it tries to lookup for checksums covering the whole range of the
extent;
10) Only after transaction N is committed that at btrfs_truncate() the
call to btrfs_start_transaction() starts a new transaction, N + 1,
instead of joining transaction N. And it's with transaction N + 1 that
it calls btrfs_truncate_inode_items() which updates the file extent
item at file offset 589824 to reduce its number of bytes from 64K down
to 24K, so that the file extent item's range ends at the i_size
rounded up to the sector size (614400 bytes).
Fix this by truncating the ordered extent at extent_writepage_io() when we
skip writeback because the current offset in the folio is beyond i_size.
This ensures we don't ever persist a file extent item with a number of
bytes beyond the rounded up (by sector size) value of the i_size.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 619611e87f ]
For the future large folio support, our filemap can have folios with
different sizes, thus we can no longer rely on a fixed blocks_per_page
value.
To prepare for that future, here we do:
- Remove btrfs_fs_info::sectors_per_page
- Introduce a helper, btrfs_blocks_per_folio()
Which uses the folio size to calculate the number of blocks for each
folio.
- Migrate the existing btrfs_fs_info::sectors_per_page to use that
helper
There are some exceptions:
* Metadata nodesize < page size support
In the future, even if we support large folios, we will only
allocate a folio that matches our nodesize.
Thus we won't have a folio covering multiple metadata unless
nodesize < page size.
* Existing subpage bitmap dump
We use a single unsigned long to store the bitmap.
That means until we change the bitmap dumping code, our upper limit
for folio size will only be 256K (4K block size, 64 bit unsigned
long).
* btrfs_is_subpage() check
This will be migrated into a future patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 975a6a8855 ]
All the error handling bugs I hit so far are all -ENOSPC from either:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
Previously when those functions failed, there was no error message at
all, making the debugging much harder.
So here we introduce extra error messages for:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
- writepage_delalloc() when btrfs_run_delalloc_range() failed
- extent_writepage() when extent_writepage_io() failed
One example of the new debug error messages is the following one:
run fstests generic/750 at 2024-12-08 12:41:41
BTRFS: device fsid 461b25f5-e240-4543-8deb-e7c2bd01a6d3 devid 1 transid 8 /dev/mapper/test-scratch1 (253:4) scanned by mount (2436600)
BTRFS info (device dm-4): first mount of filesystem 461b25f5-e240-4543-8deb-e7c2bd01a6d3
BTRFS info (device dm-4): using crc32c (crc32c-arm64) checksum algorithm
BTRFS info (device dm-4): forcing free space tree for sector size 4096 with page size 65536
BTRFS info (device dm-4): using free-space-tree
BTRFS warning (device dm-4): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-4): checking UUID tree
BTRFS error (device dm-4): cow_file_range failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): run_delalloc_nocow failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): failed to run delalloc range, root=363 ino=412 folio=458752 submit_bitmap=11-15 start=503808 len=98304: -28
Which shows an error from cow_file_range() which is called inside a
nocow write attempt, along with the extra bitmap from
writepage_delalloc().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61d730731b ]
For btrfs_folio_assert_not_dirty() and btrfs_folio_set_lock(), we call
bitmap_test_range_all_zero() to ensure the involved range has no
dirty/lock bit already set.
However with my recent enhanced delalloc range error handling, I was
hitting the ASSERT() inside btrfs_folio_set_lock(), and it turns out
that some error handling path is not properly updating the folio flags.
So add some extra dumping for the ASSERTs to dump the involved bitmap
to help debug.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7858d5c36 ]
[BUG]
If we failed to compress the range, or cannot reserve a large enough
data extent (e.g. too fragmented free space), we will fall back to
submit_uncompressed_range().
But inside submit_uncompressed_range(), run_delalloc_cow() can also fail
due to -ENOSPC or any other error.
In that case there are 3 bugs in the error handling:
1) Double freeing for the same ordered extent
This can lead to crash due to ordered extent double accounting
2) Start/end writeback without updating the subpage writeback bitmap
3) Unlock the folio without clear the subpage lock bitmap
Both bugs 2) and 3) will crash the kernel if the btrfs block size is
smaller than folio size, as the next time the folio gets writeback/lock
updates, subpage will find the bitmap already have the range set,
triggering an ASSERT().
[CAUSE]
Bug 1) happens in the following call chain:
submit_uncompressed_range()
|- run_delalloc_cow()
| |- cow_file_range()
| |- btrfs_reserve_extent()
| Failed with -ENOSPC or whatever error
|
|- btrfs_clean_up_ordered_extents()
| |- btrfs_mark_ordered_io_finished()
| Which cleans all the ordered extents in the async_extent range.
|
|- btrfs_mark_ordered_io_finished()
Which cleans the folio range.
The finished ordered extents may not be immediately removed from the
ordered io tree, as they are removed inside a work queue.
So the second btrfs_mark_ordered_io_finished() may find the finished but
not-yet-removed ordered extents, and double free them.
Furthermore, the second btrfs_mark_ordered_io_finished() is not subpage
compatible, as it uses fixed folio_pos() with PAGE_SIZE, which can cover
other ordered extents.
Bugs 2) and 3) are more straightforward, btrfs just calls folio_unlock(),
folio_start_writeback() and folio_end_writeback(), other than the helpers
which handle subpage cases.
[FIX]
For bug 1) since the first btrfs_cleanup_ordered_extents() call is
handling the whole range, we should not do the second
btrfs_mark_ordered_io_finished() call.
And for the first btrfs_cleanup_ordered_extents(), we no longer need to
pass the @locked_page parameter, as we are already in the async extent
context, thus will never rely on the error handling inside
btrfs_run_delalloc_range().
So just let the btrfs_clean_up_ordered_extents() handle every folio
equally.
For bug 2) we should not even call
folio_start_writeback()/folio_end_writeback() anymore.
As the error handling protocol, cow_file_range() should clear
dirty flag and start/finish the writeback for the whole range passed in.
For bug 3) just change the folio_unlock() to btrfs_folio_end_lock()
helper.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: e9e3b22ddf ("btrfs: fix beyond-EOF write handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
