[ Upstream commit 7a84394f02 ]
The setting of delay_retrans is applied to synchronous RPC operations
because the retransmit count is stored in same struct nfs4_exception
that is passed each time an error is checked. However, for asynchronous
operations (READ, WRITE, LOCKU, CLOSE, DELEGRETURN), a new struct
nfs4_exception is made on the stack each time the task callback is
invoked. This means that the retransmit count is always zero and thus
delay_retrans never takes effect.
Apply delay_retrans to these operations by tracking and updating their
retransmit count.
Change-Id: Ieb33e046c2b277cb979caa3faca7f52faf0568c9
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bb3baa9d1 ]
Since the last renewal time was initialized to 0 and jiffies start
counting at -5 minutes, any clients connected in the first 5 minutes
after a reboot would have their renewal timer set to a very long
interval. If the connection was idle, this would result in the client
state timing out on the server and the next call to the server would
return NFS4ERR_BADSESSION.
Fix this by initializing the last renewal time to the current jiffies
instead of 0.
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 883f309add ]
Previously, APU platforms (and other scenarios with uninitialized VRAM managers)
triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root
cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL,
but that `man->bdev` (the backing device pointer within the manager) remains
uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully
set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to
acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to
a kernel OOPS.
1. **amdgpu_cs.c**: Extend the existing bandwidth control check in
`amdgpu_cs_get_threshold_for_moves()` to include a check for
`ttm_resource_manager_used()`. If the manager is not used (uninitialized
`bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific
logic that would trigger the NULL dereference.
2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info
reporting to use a conditional: if the manager is used, return the real VRAM
usage; otherwise, return 0. This avoids accessing `man->bdev` when it is
NULL.
3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function)
data write path. Use `ttm_resource_manager_used()` to check validity: if the
manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set
`fb_usage` to 0 (APUs have no discrete framebuffer to report).
This approach is more robust than APU-specific checks because it:
- Works for all scenarios where the VRAM manager is uninitialized (not just APUs),
- Aligns with TTM's design by using its native helper function,
- Preserves correct behavior for discrete GPUs (which have fully initialized
`man->bdev` and pass the `ttm_resource_manager_used()` check).
v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33cc891b56 ]
Otherwise accessing them can cause a crash.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c05bcf6ae ]
On various SI GPUs, a flickering can be observed near the bottom
edge of the screen when using a single 4K 60Hz monitor over DP.
Disabling MCLK switching works around this problem.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d55ed19d4 ]
Those can be triggered trivially by userspace.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69a8b62a7a ]
Similar to the ARM64 commit 3505f30fb6a9s ("ARM64 / ACPI: If we chose
to boot from acpi then disable FDT"), let's not do DT hardware probing
if ACPI is enabled in early boot. This avoids errors caused by
repeated driver probing.
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Link: https://lore.kernel.org/r/20250910112401.552987-1-rabenda.cn@gmail.com
[pjw@kernel.org: cleaned up patch description and subject]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae9e9f3d67 ]
openSBI v1.7 adds harts checks for ipi operations. Especially it
adds comparison between hmask passed as an argument from linux
and mask of online harts (from openSBI side). If they don't
fit each other the error occurs.
When cpu is offline, cpu_online_mask is explicitly cleared in
__cpu_disable. However, there is no explicit clearing of
mm_cpumask. mm_cpumask is used for rfence operations that
call openSBI RFENCE extension which uses ipi to remote harts.
If hart is offline there may be error if mask of linux is not
as mask of online harts in openSBI.
this patch adds explicit clearing of mm_cpumask for offline hart.
Signed-off-by: Danil Skrebenkov <danil.skrebenkov@cloudbear.ru>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250919132849.31676-1-danil.skrebenkov@cloudbear.ru
[pjw@kernel.org: rewrote subject line for clarity]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ad1b71fdc ]
According to the explanation in commit ef10bdf9c3 ("riscv:
Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210"),
loader.bin is a special feature of the Canaan K210 and
is not applicable to other SoCs.
Fixes: e79dfcbfb9 ("riscv: make image compression configurable")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20251029094429.553842-1-jiangfeng@kylinos.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9818af18db ]
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ec364c0c9 ]
Since commit a166563e7e ("arm64: mm: support large block mapping when
rodata=full"), __change_memory_common has more chance to fail due to
memory allocation failure when splitting page table. So check the return
value of set_memory_rox(), then bail out if it fails otherwise we may have
RW memory mapping for kprobes insn page.
Fixes: 195a1b7d83 ("arm64: kprobes: call set_memory_rox() for kprobe page")
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b11a020d91 ]
Currently Xe driver is triggering flr without any clean-up on
shutdown. This is causing random warnings from pending related works as the
underlying hardware is reset in the middle of their execution.
Fix this by performing clean shutdown also when using flr.
Fixes: 501d799a47 ("drm/xe: Wire up device shutdown handler")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20251031122312.1836534-1-jouni.hogander@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit a4ff26b7c8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cd27eec87 ]
The xe_device_shutdown() function was needing a few declarations
that were only required under a specific condition. This change
moves those declarations to be within that conditional branch
to avoid unnecessary declarations.
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251007100208.1407021-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 15b3036045)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: b11a020d91 ("drm/xe: Do clean shutdown also when using flr")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95af8f4fdc ]
Cancel and wait for any Dead CT worker to complete before continuing
with device unbinding. Else the worker will end up using resources freed
by the undind operation.
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Fixes: d2c5a5a926 ("drm/xe/guc: Dead CT helper")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251103123144.3231829-6-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4926713391)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b09cb2996c ]
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4104c0a454)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b540de9e3b ]
Fix refcount leak in `smb2_set_path_attr` when path conversion fails.
Function `cifs_get_writable_path` returns `cfile` with its reference
counter `cfile->count` increased on success. Function `smb2_compound_op`
would decrease the reference counter for `cfile`, as stated in its
comment. By calling `smb2_rename_path`, the reference counter of `cfile`
would leak if `cifs_convert_path_to_utf16` fails in `smb2_set_path_attr`.
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d44ad6b43 ]
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2ada9cb1df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added the Fixes tag while cherry-picking to fixes]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afcfb6c847 ]
Call pm_runtime_resume_and_get() before accessing GCE hardware in
mbox_send_message(), and invoke pm_runtime_put_autosuspend() in the
cmdq callback to release the PM reference and start autosuspend for
GCE. This ensures correct power management for the GCE device.
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829091727.3745415-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fdc93beead upstream.
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600c ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 678c901443)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38ab33dbea upstream.
Align the function headers for `amdgpu_max_hdmi_pixel_clock` and
`amdgpu_connector_dvi_mode_valid` with the function implementations so
they match the expected kdoc style.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns the maximum supported HDMI (TMDS) pixel clock in KHz.
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Validates the given display mode on DVI and HDMI connectors.
Fixes: 585b2f685c ("drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2)")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46b0e6b9d7 upstream.
The error log is supposed to be gaurded under if failure condition.
Fixes: faab5ea083 ("drm/amdgpu: Check vcn sram load return value")
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 543d350040 upstream.
Commit 4d330fe541 ("ACPI: SPCR: Support Precise Baud Rate field")
added support to use the precise baud rate available since SPCR 1.09
(revision 4) but failed to check the version of the table provided by
the firmware.
Accessing an older version of SPCR table causes accesses beyond the
end of the table and can lead to garbage data to be used for the baud
rate.
Check the version of the firmware provided SPCR to ensure that the
precise baudrate is vaild before using it.
Fixes: 4d330fe541 ("ACPI: SPCR: Support Precise Baud Rate field")
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024123125.1081612-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f9c638837 upstream.
Use `atomic_commit_setup` to change the DC stream state. It's a
preparation to remove from `atomic_check` changes in CRTC color
components of DC stream state and prevent DC to commit TEST_ONLY
changes.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d34caa89a1 upstream.
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d968e99488 upstream.
Link startup becomes unreliable for Intel Alder Lake based host
controllers when a 2nd DME_LINKSTARTUP is issued unnecessarily. Employ
UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress that from happening.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-4-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb44826c3b upstream.
Intel platforms with UFS, can support Suspend-to-Idle (S0ix) and
Suspend-to-RAM (S3). For S0ix the link state should be HIBERNATE. For
S3, state is lost, so the link state must be OFF. Driver policy,
expressed by spm_lvl, can be 3 (link HIBERNATE, device SLEEP) for S0ix
but must be changed to 5 (link OFF, device POWEROFF) for S3.
Fix support for S0ix/S3 by switching spm_lvl as needed. During suspend
->prepare(), if the suspend target state is not Suspend-to-Idle, ensure
the spm_lvl is at least 5 to ensure that resume will be possible from
deep sleep states. During suspend ->complete(), restore the spm_lvl to
its original value that is suitable for S0ix.
This fix is first needed in Intel Alder Lake based controllers.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-2-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b81082ad3 upstream.
Commit 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.
Cc: stable@vger.kernel.org
Fixes: 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c71670396 upstream.
Since commit 4959aebba8 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change.
Fixes: 4959aebba8 ("virtio-net: use mtu size as buffer length for big packets")
Cc: stable@vger.kernel.org
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251030144438.7582-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c5609b72b upstream.
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd39b5a583)
Cc: <stable@vger.kernel.org> # c81f5cebe8: drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734e99623c upstream.
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4012abe8a7 upstream.
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 162f24cbb0 upstream.
This code is intended to operate on the CTRL1 register, but ctrl[1] is
actually CTRL2. Correctly, ctrl[0] is CTRL1.
Signed-off-by: Yuta Hayama <hayama@lineo.co.jp>
Fixes: 71af915650 ("rtc: rx8025: fix 12/24 hour mode detection on RX-8035")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/eae5f479-5d28-4a37-859d-d54794e7628c@lineo.co.jp
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd9f30d103 upstream.
Guenter Roeck reported this kernel crash on his emulated B160L machine:
Starting network: udhcpc: started, v1.36.1
Backtrace:
[<104320d4>] unwind_once+0x1c/0x5c
[<10434a00>] walk_stackframe.isra.0+0x74/0xb8
[<10434a6c>] arch_stack_walk+0x28/0x38
[<104e5efc>] stack_trace_save+0x48/0x5c
[<105d1bdc>] set_track_prepare+0x44/0x6c
[<105d9c80>] ___slab_alloc+0xfc4/0x1024
[<105d9d38>] __slab_alloc.isra.0+0x58/0x90
[<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0
[<105b8e54>] __anon_vma_prepare+0x60/0x280
[<105a823c>] __vmf_anon_prepare+0x68/0x94
[<105a8b34>] do_wp_page+0x8cc/0xf10
[<105aad88>] handle_mm_fault+0x6c0/0xf08
[<10425568>] do_page_fault+0x110/0x440
[<10427938>] handle_interruption+0x184/0x748
[<11178398>] schedule+0x4c/0x190
BUG: spinlock recursion on CPU#0, ifconfig/2420
lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0
While creating the stack trace, the unwinder uses the stack pointer to guess
the previous frame to read the previous stack pointer from memory. The crash
happens, because the unwinder tries to read from unaligned memory and as such
triggers the unalignment trap handler which then leads to the spinlock
recursion and finally to a deadlock.
Fix it by checking the alignment before accessing the memory.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d59fba493 upstream.
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 487df8b698 upstream.
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c6a743c69 upstream.
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f5 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62320fb8d9)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 80f0d631dc ]
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee87c63f9b ]
As Ido pointed out, the static key usage in MST is buggy and should use
inc/dec instead of enable/disable because we can have multiple bridges
with MST enabled which means a single bridge can disable MST for all.
Use static_branch_inc/dec to avoid that. When destroying a bridge decrement
the key if MST was enabled.
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/netdev/20251104120313.1306566-1-razor@blackwall.org/T/#m6888d87658f94ed1725433940f4f4ebb00b5a68b
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dca36978a ]
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0216721ce7 ]
The following warning was seen when we try to connect using ssh to the device.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE
Tainted: [W]=WARN
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __might_resched+0x16c/0x2b0
__might_resched from __mutex_lock+0x64/0xd34
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from lan966x_stats_get+0x5c/0x558
lan966x_stats_get from dev_get_stats+0x40/0x43c
dev_get_stats from dev_seq_printf_stats+0x3c/0x184
dev_seq_printf_stats from dev_seq_show+0x10/0x30
dev_seq_show from seq_read_iter+0x350/0x4ec
seq_read_iter from seq_read+0xfc/0x194
seq_read from proc_reg_read+0xac/0x100
proc_reg_read from vfs_read+0xb0/0x2b0
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b11fa8 to 0xf0b11ff0)
1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001
1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001
1fe0: 0005404c be9048c0 00018684 b6ec2cd8
It seems that we are using a mutex in a atomic context which is wrong.
Change the mutex with a spinlock.
Fixes: 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251105074955.1766792-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96baf482ca ]
KSZ9477/KSZ9897 and LAN937X families of switches use a reserved multicast
address table for some specific forwarding with some multicast addresses,
like the one used in STP. The hardware assumes the host port is the last
port in KSZ9897 family and port 5 in LAN937X family. Most of the time
this assumption is correct but not in other cases like KSZ9477.
Originally the function just setups the first entry, but the others still
need update, especially for one common multicast address that is used by
PTP operation.
LAN937x also uses different register bits when accessing the reserved
table.
Fixes: 457c182af5 ("net: dsa: microchip: generic access to ksz9477 static and reserved table")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251105033741.6455-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d6ec3a793 ]
The driver calls mfd_add_devices() but fails to call mfd_remove_devices()
in error paths after successful MFD device registration and in the remove
function. This leads to resource leaks where MFD child devices are not
properly unregistered.
Replace mfd_add_devices with devm_mfd_add_devices to automatically
manage the device resources.
Fixes: c96e976d9a ("net: wan: framer: Add support for the Lantiq PEF2256 framer")
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20251105034716.662-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bacd8d8018 ]
mlx5e_hw_gro_skb_has_enough_space() uses a formula to check if there is
enough space in the skb frags to store more data. This formula is
incorrect for 64K page sizes and it triggers early GRO session
termination because the first fragment will blow up beyond
GRO_LEGACY_MAX_SIZE.
This patch adds a special case for page sizes >= GRO_LEGACY_MAX_SIZE
(64K) which uses the skb->len instead. Within this context,
the check is safe from fragment overflow because the hardware
will continuously fill the data up to the reservation size of 64K
and the driver will coalesce all data from the same page to the same
fragment. This means that the data will span one fragment or at most
two for such a large page size.
It is expected that the if statement will be optimized out as the
check is done with constants.
Fixes: 92552d3abd ("net/mlx5e: HW_GRO cqe handler implementation")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
