Commit graph

286,663 commits

Author SHA1 Message Date
Eyal Shapira
cc438fccd5 wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters
A minor fix for the check that verifies that all given SSIDs (in req) exist
in the filters (the match sets)

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08 15:02:45 -05:00
Helmut Schaa
a59be0811c ath: Fix NULL ptr dereference in ath_reg_apply_world_flags
This happens with devices using a regulatory domain 0x68 that are only
5Ghz capable because ath_reg_apply_active_scan_flags assumes that we
always have a 2,4Ghz band.

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384
Oops[#1]:
Cpu 0
$ 0 : 00000000 00000061 00000003 00000024
$ 4 : 00000003 000016c1 82f900ac 00000024
$ 8 : 00000000 82cda304 0058bad8 00000005
$12 : 005908f8 001e8481 00000003 1dcd6500
$16 : 00000002 00000000 82c700c0 82c700c0
$20 : 82d415e4 82c70d64 82c70200 82c715bc
$24 : 00000000 11e1a300
$28 : 82ce2000 82ce3c70 82c715a8 82cd8384
Hi : 00000000
Lo : 0000001e
epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath]
Not tainted
ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath]
Status: 1000d403 KERNEL EXL IE
Cause : 80800008
BadVA : 00000000
PrId : 00019374 (MIPS 24Kc)
Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211
	compat_firmware_class compat arc4 aes_generic deflate ecb cbc
	leds_gpio button_hotplug gpio_buttons input_polldev ie
Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000)
Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068
82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40
00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8
00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000
82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0
...
Call Trace:
[<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath]
[<82cd88f4>] ath_regd_init+0x464/0x488 [ath]
[<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k]
[<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k]
[<80181de0>] pci_device_probe+0x64/0xa4
[<8019e874>] driver_probe_device+0xb8/0x190
[<8019e9b8>] __driver_attach+0x6c/0xa4
[<8019dfc0>] bus_for_each_dev+0x60/0xb0
[<8019d744>] bus_add_driver+0xc4/0x25c
[<8019ed6c>] driver_register+0xe0/0x198
[<8018206c>] __pci_register_driver+0x50/0xe0
[<82dd0010>] ath9k_init+0x10/0x54 [ath9k]
[<8006b4a0>] do_one_initcall+0x68/0x1ec
[<800a901c>] sys_init_module+0xec/0x23c
[<80062544>] stack_done+0x20/0x3c

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08 15:02:45 -05:00
Johannes Berg
c26887d2a4 cfg80211: fix missing kernel-doc
Two new struct members were not documented, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08 15:02:44 -05:00
John W. Linville
9270fd61a3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth 2011-11-08 14:59:14 -05:00
Paul Gortmaker
6aec187a90 drivers/media: video/a5k6aa is a module and so needs module.h
This file uses core functions like module_init() and module_exit()
and so it explicitly needs to include the module.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-08 14:56:50 -05:00
Chris Mason
917c16b2b6 Btrfs: fix oops on NULL trans handle in btrfs_truncate
If we fail to reserve space in the transaction during truncate, we can
error out with a NULL trans handle.  The cleanup code needs an extra
check to make sure we aren't trying to use the bad handle.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-08 14:49:59 -05:00
Grant Likely
a59024f1ec Merge branch 'for_3.2/gpio-cleanup' of git://gitorious.org/khilman/linux-omap-pm into gpio/merge 2011-11-08 12:48:27 -07:00
Nishanth Menon
1c78217fc8 cpufreq: OMAP: fix freq_table leak
We use a single frequency table for multiple CPUs. But, with
OMAP4, since we have multiple CPUs, the cpu_init call for CPU1
causes freq_table previously allocated for CPU0 to be overwritten.
In addition, we dont free the table on exit path.

We solve this by maintaining an atomic type counter to ensure
just a single table exists at a given time.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:17 -08:00
Nishanth Menon
11e04fdd98 cpufreq: OMAP: put clk if cpu_init failed
Release the mpu_clk in fail paths.

Reported-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:17 -08:00
Nishanth Menon
ffe4f0f115 cpufreq: OMAP: only supports OPP library
OMAP2 is the only family using clk_[init|exit]_cpufreq_table, however,
the cpufreq code does not currently use clk_init_cpufreq_table. As a
result, it is unusuable for OMAP2 and only usable only on platforms
using OPP library.

Remove the unbalanced clk_exit_cpufreq_table().  Any platforms where
OPPs are not availble will fail on init because a freq table will not
be properly initialized.

Signed-off-by: Nishanth Menon <nm@ti.com>
[khilman@ti.com: changelog edits, and graceful failure mode changes]
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:17 -08:00
Nishanth Menon
bf2a359d50 cpufreq: OMAP: dont support !freq_table
OMAP2+ all have frequency tables, hence the hacks we had for older
silicon do not need to be carried forward. As part of this change,
use cpufreq_frequency_table_target to find the best match for
frequency requested.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:17 -08:00
Nishanth Menon
a820ffa8fd cpufreq: OMAP: deny initialization if no mpudev
if we do not have mpu_dev we normally fail in cpu_init. It is better
to fail driver registration if the devices are not available.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:17 -08:00
Nishanth Menon
08ca3e3b8d cpufreq: OMAP: move clk name decision to init
Clk name does'nt need to dynamically detected during clk init.
move them off to driver initialization, if we dont have a clk name,
there is no point in registering the driver anyways. The actual clk
get and put is left at cpu_init and exit functions.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:16 -08:00
Colin Cross
022ac03b45 cpufreq: OMAP: notify even with bad boot frequency
Sometimes, bootloaders starts up with a frequency which is not
in the OPP table. At cpu_init, policy->cur contains the frequency
we pick at boot.  It is possible that system might have fixed
it's boot frequency later on as part of power initialization.
After this condition, the first call to omap_target results in the
following:

omap_getspeed(actual device frequency) != policy->cur(frequency that
cpufreq thinks that the system is at), and it is possible that
freqs.old == freqs.new (because the governor requested a scale down).

We exit without triggering the notifiers in the current code, which
does'nt let code which depends on cpufreq_notify_transition to have
accurate information as to what the system frequency is.

Instead, we do a normal transition if policy->cur is wrong, then,
freqs.old will be the actual cpu frequency, freqs.new will be the
actual new cpu frequency and all required notifiers have the accurate
information.

Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Colin Cross <ccross@google.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:16 -08:00
Todd Poynor
ed8ce00c52 cpufreq: OMAP: Enable all CPUs in shared policy mask
Enable all CPUs in the shared policy in the CPU init callback.
Otherwise, the governor CPUFREQ_GOV_START event is invoked with
a policy that only includes the first CPU, leaving other CPUs
uninitialized by the governor.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:16 -08:00
Russell King
46c12216c8 cpufreq: OMAP: Add SMP support for OMAP4+
On OMAP SMP configuartion, both processors share the voltage
and clock. So both CPUs needs to be scaled together and hence
needs software co-ordination.

Also, update lpj with reference value to avoid progressive error.

Adjust _both_ the per-cpu loops_per_jiffy and global lpj. Calibrate
them with with reference to the initial values to avoid a
progressively bigger and bigger error in the value over time.

While at this, re-use the notifiers for UP/SMP since on UP machine or
UP_ON_SMP policy->cpus mask would contain only the boot CPU.

Based on initial SMP support by Santosh Shilimkar.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[khilman@ti.com: due to overlap/rework, combined original Santosh patch
                 and Russell's rework]
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:16 -08:00
Santosh Shilimkar
731e0cc639 cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq
Move OMAP cpufreq driver from arch/arm/mach-omap2 into
drivers/cpufreq, along with a few cleanups:

- generalize support for better handling of different SoCs in the OMAP
- use OPP layer instead of OMAP clock internals for frequency table init

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[khilman@ti.com: move to drivers]
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08 11:42:16 -08:00
Steffen Klassert
2bc8ca40f9 ipv4: Fix inetpeer expire time information
As we update the learned pmtu informations on demand, we might
report a nagative expiration time value to userspace if the
pmtu informations are already expired and we have not send a
packet to that inetpeer after expiration. With this patch we
send a expire time of null to userspace after expiration
until the next packet is send to that inetpeer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 14:40:40 -05:00
Eric Dumazet
20db93c340 net: min_pmtu default is 552
Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 14:21:44 -05:00
Feng King
6d67e9beb6 tcp: Fix comments for Nagle algorithm
TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small
segments will always pass Nagle test regardless of TCP_NODELAY option.

Signed-off-by: Feng King <kinwin2008@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 14:02:47 -05:00
oftedal
59caa5612c sunhme: Allow usage on SBI based SBus systems
To prevent the SBus driver for Sun Happy Meal cards from being loaded for
PCI cards utilizing the same chipset, a filter was added to the probe
function in commit 0b492fce3d.

The filter was implemented by checking the name of the parent node in
the OF tree. This patch extends this filter, so that the driver will
load on SBus systems that are based upon SBI SBus Bridges.

Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 14:01:42 -05:00
Eric Dumazet
e50e705ca7 l2tp: fix l2tp_udp_recv_core()
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 13:59:44 -05:00
Mike Marciniszyn
042f36e156 IB/qib: Don't use schedule_work()
It was mistakenly introduced by dde05cbdf8 ("IB/qib: Hold links
until tuning data is available").

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-08 10:37:53 -08:00
Dirk B
5f300acd8a ARM: 7152/1: distclean: Remove generated .dtb files
The patch 'arm/dt: Add dtb make rule' adds support to
create a .dtb file. But this is never removed afterwards.
Remove the generated .dtb file if 'distclean' is called.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-08 18:25:04 +00:00
Catalin Marinas
8428e84d42 ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors
Recent gcc versions generate unaligned accesses by default on ARMv6 and
later processors. This patch ensures that the SCTLR.A bit is always
cleared on such processors to avoid kernel traping before
alignment_init() is called.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: John Linn <John.Linn@xilinx.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-08 18:25:04 +00:00
Ulf Hansson
71e63e748e ARM: 7149/1: spi/pl022: Enable clock in probe
Make sure we enable the clock before leaving probe.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-08 18:25:03 +00:00
Alan Cox
a8d12007c7 n_gsm: Fix timings
Alek Du reported that the code erroneously applies time to jiffies
conversions twice to the t1 and t2 values. In normal use on a modem link
this cases no visible problem but on a slower link it will break as with
HZ=1000 as is typical we are running t1/t2 ten times too fast.

Alek's original patch removed the conversion from the timer setting but we
in fact have to be more careful as the contents of t1/t2 are visible via
the device API and we thus need to correct the constants.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-08 10:10:20 -08:00
Al Cooper
4f1a1eb530 MIPS: Kernel hangs occasionally during boot.
The Kernel hangs occasionally during boot after "Calibrating delay loop..".
This is caused by the c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable the timer and hang later.
The false return happens because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits for the timer changes to
propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb instructions and can take
as little as a few clock ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not working.  This fix uses up
to a max number of cycle counter ticks for the delay and uses
back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the
hazard condition between cp0 writes and cp0 reads.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2911/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 17:59:22 +00:00
Nico Erfurth
ea1649dea9 Fix incorrect usage of NET_IP_ALIGN
The driver used NET_IP_ALIGN to remove some additional padding inside of
the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2
which removed the correct amount of bytes.

On MCORE2-machines commit ea812ca1b0
introduces a change which sets NET_IP_ALIGN to 0 by default. Which
triggered the bug on these machines.

This fix introduces a new RXW_PADDING define and uses this instead of
NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which
is provided by SMSC.

Signed-off-by: Nico Erfurth <ne@erfurth.eu>
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 12:37:07 -05:00
Brian Haley
c457338d7a ipv6: drop packets when source address is multicast
RFC 4291 Section 2.7 says Multicast addresses must not be used as source
addresses in IPv6 packets - drop them on input so we don't process the
packet further.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Reported-and-Tested-by: Kumar Sanghvi <divinekumar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 12:37:06 -05:00
hayeswang
10953db8e1 r8169: increase the delay parameter of pm_schedule_suspend
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds
from link down to link up. If the delay of pm_schedule_suspend is not long enough,
the device would enter runtime_suspend before link up. After link up, the device
would wake up and reset PHY again. Then, you would find the driver keep in a loop
of runtime_suspend and rumtime_resume.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08 12:37:06 -05:00
Marc Zyngier
eca55f4d9c ARM: msm: fix compilation flags for MSM_SCM
CONFIG_MSM_SCM uses the smc instruction, which with some
toolchains requires a ".arch_extension" directive.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 08:58:28 -08:00
Takashi Iwai
dcaaf9f2c1 ALSA: usb-audio - Fix the missing volume quirks at delayed init
In the recent usb-audio driver, the initialization of volume ranges
may be delayed when the device doesn't respond well at the probing time.
But the volume quirks for certain devices are applied only in
mixer_ctl_feature_info() thus only at the very first probe and will be
missing when the volume range is initialized later.

This patch moves the volume quirk code to be always called from the
volume-range extraction (get_min_max()), so that the quirks are properly
applied in the later init time.

Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 17:50:27 +01:00
Christoph Hellwig
810627d9a6 xfs: fix force shutdown handling in xfs_end_io
Ensure ioend->io_error gets propagated back to e.g. AIO completions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
2011-11-08 10:48:23 -06:00
Christoph Hellwig
272e42b215 xfs: constify xfs_item_ops
The log item ops aren't nessecarily the biggest exploit vector, but marking
them const is easy enough.  Also remove the unused xfs_item_ops_t typedef
while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
2011-11-08 10:48:23 -06:00
Carlos Maiolino
b52a360b2a xfs: Fix possible memory corruption in xfs_readlink
Fixes a possible memory corruption when the link is larger than
MAXPATHLEN and XFS_DEBUG is not enabled. This also remove the
S_ISLNK assert, since the inode mode is checked previously in
xfs_readlink_by_handle() and via VFS.

Updated to address concerns raised by Ben Hutchings about the loose
attention paid to 32- vs 64-bit values, and the lack of handling a
potentially negative pathlen value:
 - Changed type of "pathlen" to be xfs_fsize_t, to match that of
   ip->i_d.di_size
 - Added checking for a negative pathlen to the too-long pathlen
   test, and generalized the message that gets reported in that case
   to reflect the change
As a result, if a negative pathlen were encountered, this function
would return EFSCORRUPTED (and would fail an assertion for a debug
build)--just as would a too-long pathlen.

Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-11-08 10:48:23 -06:00
J. Bruce Fields
16bfdaafa2 nfsd4: share open and lock owner hash tables
Now that they're used in the same way, it's a little simpler to put open
and lock owners in the same hash table, and I can't see a reason not to.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-11-08 11:28:45 -05:00
Ming Lei
08f2e6312c iommu: omap: Fix compile failure
Fix compile failure in drivers/iommu/omap-iommu-debug.c
because of missing module.h include.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-11-08 17:11:57 +01:00
Mark Brown
0469e7b98c ASoC: Disable debounce on some WM8962 interrupts
Allow them to work when the device is unclocked.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 15:39:54 +00:00
Mark Brown
620c36ae66 Merge branch 'for-3.2' into for-3.3 2011-11-08 15:39:44 +00:00
Axel Lin
adf463626a ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL register
WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h).
Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 15:39:36 +00:00
Axel Lin
f1e10354fc ASoC: wm9081: Fix reading wrong register for setting VMID 2*240k
VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL
register (04h).
Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting
VMID 2*240k.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 15:39:32 +00:00
Luck, Tony
66f5ddf30a x86/mce: Make mce_chrdev_ops 'static const'
Arjan would like to make struct file_operations const, but
mce-inject directly writes to the mce_chrdev_ops to install its
write handler. In an ideal world mce-inject would have its own
character device, but we have a sizable legacy of test scripts
that hardwire "/dev/mcelog", so it would be painful to switch to
a separate device now. Instead, this patch switches to a stub
function in the mce code, with a registration helper that
mce-inject can call when it is loaded.

Note that this would also allow for a sane process to allow
mce-inject to be unloaded again (with an unregister function,
and appropriate module_{get,put}() calls), but that is left for
potential future patches.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/4eb2e1971326651a3b@agluck-desktop.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-08 16:17:11 +01:00
Wen-chien Jesse Sung
d13431ca3e Bluetooth: Add support for Broadcom BCM20702A0
Since this device declares itself as vendor specific, must add
a new entry to device ID table to support it.

usb-device output of this device:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=D0DF9AA9C9F1
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 13:15:43 -02:00
Johan Hedberg
4c659c3976 Bluetooth: Add address type fields to mgmt messages that need them
This patch adds address type info (typically BR/EDR vs LE) to management
messages that need this. This also ensures conformance to the latest
management API specification.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 13:05:57 -02:00
Johan Hedberg
86742e1eca Bluetooth: Update link key mgmt APIs to match latest spec.
BR/EDR link keys have their own commands and events (separate from SMP)
and the remove_keys command (previously remove_key) removes keys of any
kind for the specified remote address.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 13:03:25 -02:00
Johan Hedberg
bd2d1334e1 Bluetooth: Fix response for mgmt_start_discovery when powered off
We should return a ENETDOWN status response if the adapter is powered
off (i.e. the HCI_UP flag isn't set).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 13:02:08 -02:00
Johan Hedberg
889d07ee57 Bluetooth: Remove redundant code from mgmt_block & mgmt_unblock
There's no need to deal with mgmt_pending_cmd when blocking and
unblocking devices since these actions are synchronous.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 13:01:53 -02:00
Johan Hedberg
3243553fdc Bluetooth: Convert power off mechanism to use delayed_work
The power off code doesn't need to use its own custom timer since the
delayed_work API provides the exact same functionality.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 12:54:10 -02:00
Johan Hedberg
2d7cee5836 Bluetooth: Fix mgmt response when HCI_Write_Scan_Enable fails
A proper mgmt_command_status should be returned to user-space if either
discoverable or connectable enabling fails.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08 12:54:10 -02:00