Commit graph

286,663 commits

Author SHA1 Message Date
Sylwester Nawrocki
82aae98df4 [media] staging: as102: Remove leftovers of the SPI bus driver
SPI bus driver support is not included in this module, the SPI
driver files are missing. But some bits are still present so
clean up the unused code.
The SPI driver support can be properly added later if needed.

Then CONFIG_AS102_SPI and CONFIG_AS102_USB is now not needed
and the pre-processor statements using these config options
can now be removed from *.c files.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:28:06 -02:00
Sylwester Nawrocki
c06271e052 [media] staging: as102: Remove unnecessary typedefs
According to the kernel coding rules typedefs should be avoided,
so replace theit occurances with explicit enum/union types.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:24:44 -02:00
Piotr Chmura
7f033e3354 [media] staging: as102: Remove comment tags for editors configuration
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Piotr Chmura <chmooreck@poczta.onet.pl>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:24:25 -02:00
Malcolm Priestley
3339a5b165 [media] it913x-fe ver 1.10 correct SNR reading from frontend
Correction of reading from frontend and represents
a SNR nonlinear scale of minimum signal to full signal.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:23:03 -02:00
Peter De Schrijver
c540d9f13d [media] bt8xx: add support for PCI device ID 0x36c
add support for conexant PCI device 0x36c. Seems to be fully compatible with
the currently supported chips, yet the chip has different PCI ID.

Signed-off-by: Peter De Schrijver <p2@psychaos.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:22:24 -02:00
Peter De Schrijver
de2843b663 [media] bt8xx: add support for Tongwei Video Technology TD-3116
The following patch adds support for the Tongwei Video Technology TD-3116 board. This
is a Bt878 based capture card with 16 inputs meant for surveilance applications.
It also offers a way to check which inputs have a video signal while capturing another
input. In addition there are a number of alarm inputs and outputs available and there
is microcontroller which is presumably intended for use as a system watchdog. None of
these extra capabilities are supported by the patch.

Signed-off-by: Peter De Schrijver <p2@psychaos.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:17:57 -02:00
Malcolm Priestley
3822c7cef7 [media] it913x ver 1.09 support for USB 1 devices (IT9135)
IT9135 devices do support USB 1.
Support added with restricton on pid count to 5.
IT9137 devices wil not connect in USB 1 mode.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:45:19 -02:00
Venkat Subbiah
e63fb7a9da MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
This is to exclude it from force threading to allow RT patch set to work.
And while on this line
* Remove IRQF_DISABLED as as this flag is NOOP
* Add IRQF_PERCPU as this is a per cpu interrupt.

Signed-off-by: Venkat Subbiah <venkat.subbiah@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
To: linux-rt-users@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2817/
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:30 +00:00
Florian Fainelli
df55a66add MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
Since eb9ae7f2 (gpio: fix build error in include/asm-generic/gpio.h)
the generic version of gpio.h calls __gpio_{set,get}_value which we
do not define. Get rid of asm-generic/gpio.h and define the missing
stubs directly for BCM47xx to build.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org
CC: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/2885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Ralf Baechle
7985808151 MIPS: NXP: Remove unused source files.
The NXP code was moved for 2.6.36 but two files survived unused in the
old location.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Thomas Jarosch
617d101754 MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
Cause is a misplaced bracket.

The code

    strlen(buf+1)

will be two bytes less than

    strlen(buf)+1

The +1 is in this code to reserve space for an additional space character.

[ralf@linux-mips.org: Thomas' original patch fixed the issue only for
 Yosemite but the same bug exists also in Emma.]

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Patchwork: https://patchwork.linux-mips.org/patch/2861/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Hans de Goede
1249a3a82d [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls
Otherwise the fh changing the master control won't get the inactive state
change event for the slave controls.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:30:33 -02:00
Hans de Goede
e3e72f39b6 [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe
Setting sev->fh to NULL causes problems for the del op added in the next
patch of this series, since this op needs a way to get to its own data
structures, and typically this will be done by using container_of on an
embedded v4l2_fh struct.

The reason the original code is setting sev->fh to NULL is to signal
to users of the event framework that the unsubscription has happened,
but since their is no shared lock between the event framework and users
of it, this is inherently racy, and it also turns out to be unnecessary
as long as both the event framework and the user of the framework do their
own locking properly and the user guarantees that it holds no references
to the subcribed_event structure after its del operation has been called.

This is best explained by looking at the only code currently checking for
sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event
function. Here is the relevant code from v4l2-ctrls: send_event():

	if (sev->fh && (sev->fh != fh ||
			(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
		v4l2_event_queue_fh(sev->fh, &ev);

Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race
on the same sev, then the following could happens:

1) send_event checks sev->fh, finds it is not NULL
<thread switch>
2) v4l2_event_unsubscribe sets sev->fh NULL
3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent
   to calling: v4l2_event_queue_fh(NULL, &ev)
5) oops, NULL pointer deref.

Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and
without the (now senseless since always true) sev->fh != NULL check in

1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev)
<thread switch>
2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list
<thread switch>
3) send_event calls v4l2_event_queue_fh(sev->fh, &ev)
4) v4l2_event_queue_fh blocks on the fh_lock spinlock
<thread switch>
5) v4l2_event_unsubscribe unlocks the fh_lock spinlock
6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
8) v4l2_event_queue_fh takes the fh_lock
7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since
   sev->list has been removed from fh->subscribed already -> does nothing
9) v4l2_event_queue_fh releases the fh_lock
10) the caller of send_event releases the ctrl lock (mutex)
<thread switch>
11) v4l2_ctrls del_event takes the ctrl lock
12) v4l2_ctrls del_event removes sev->node from the ev_subs list
13) v4l2_ctrls del_event releases the ctrl lock
14) v4l2_event_unsubscribe frees the sev, to which no references are being
    held anymore

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:51 -02:00
Hans de Goede
78c87e863b [media] v4l2-event: Remove pending events from fh event queue when unsubscribing
The kev pointers inside the pending events queue (the available queue) of the
fh point to data inside the sev, unsubscribing frees the sev, thus making these
pointers point to freed memory!

This patch fixes these dangling pointers in the available queue by removing
all matching pending events on unsubscription.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:29 -02:00
Hans de Goede
b36b505965 [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:05 -02:00
Javier Martinez Canillas
2da12fcbea [media] tvp5150: replace video standard "magic" numbers
64933337e3
[media] tvp5150: Add video format registers configuration values

Added constants for each video standard supported by TVP5150, so this patch
get rid of the magic numbers.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:24:13 -02:00
Jeongtae Park
60659dd495 [media] MAINTAINERS: add a maintainer for s5p-mfc driver
Add a maintainer for s5p-mfc driver.

Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:12:14 -02:00
Kamil Debski
918847341a [media] v4l: add G2D driver for s5p device family
G2D is a 2D graphics accelerator engine present in the s5p family
of Samsung SoCs. It is capable of bitblt and raster operations on
images having dimensions of up to 8000x8000.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:11:16 -02:00
Mark Brown
c2b164fa8d Merge branch 'topic/cache' of git://opensource.wolfsonmicro.com/regmap into for-3.3 2011-11-08 11:44:51 +00:00
Mark Brown
8ae0d7e8a9 regmap: Track if the register cache is dirty and suppress unneeded syncs
Allow drivers to optimise out the register cache sync if they didn't need
to do one. If the hardware is desynced from the register cache (by power
loss for example) then the driver should call regcache_mark_dirty() to
let the core know about this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:38:15 +00:00
Mark Brown
b973aa3624 regmap: Fix typo in kerneldoc for regmap_update_bits()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:32:55 +00:00
Mark Brown
7ea7580183 regmap: Fix word wrap in Makefile
80 columns FTW.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:32:31 +00:00
Mark Brown
82732bdd66 regmap: Prepare LZO cache for variable block sizes
Give regcache_lzo_block_count() a copy of the map so that when we decide
we want to make the LZO cache more controllable we can more easily do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2011-11-08 11:32:05 +00:00
Mark Brown
f8beab2bb6 regmap: Add a reusable irq_chip for regmap based interrupt controllers
There seem to be lots of regmap-using devices with very similar interrupt
controllers with a small bank of interrupt registers and mask registers
with an interrupt per bit. This won't cover everything but it's a good
start.

Each chip supplies a base for the status registers, a base for the mask
registers, an optional base for writing acknowledgements (which may be the
same as the status registers) and an array of bits within each of these
register banks which indicate the interrupt.

There is an assumption that the bit for each interrupt will be the same
in each of the register bank.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:29:48 +00:00
Kamil Debski
43defb1182 [media] v4l: s5p-mfc: fix reported capabilities
MFC uses the multi-plane API, but it reported single-plane
when querying capabilities.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:06:09 -02:00
Marek Szyprowski
bd50d999d4 [media] media: vb2: reset queued list on REQBUFS(0) call
Queued list was not reset on REQBUFS(0) call. This caused to enqueue a
freed buffer to the driver.

Reported-by: Angela Wan <angela.j.wan@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:05:41 -02:00
Marek Szyprowski
4907602f85 [media] media: vb2: set buffer length correctly for all buffer types
v4l2_planes[plane].length field was not initialized for userptr buffers.
This patch fixes this issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:05:23 -02:00
Axel Lin
e94de1e864 ASoC: Avoid a redundant read in cs42l51_pdn_event
snd_soc_update_bits already does read-modify-write,
no need to read the register before calling snd_soc_update_bits.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:02:31 +00:00
Kuninori Morimoto
65ff03f462 ASoC: fsi: add valid data position control support
FSI2 can control valid data position, like
package in front/back or stream  mode (16bit x 2).
But current fsi driver is assuming it was in-back.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:02:00 +00:00
Marek Szyprowski
2c2dd6ac73 [media] media: vb2: add a check for uninitialized buffer
__buffer_in_use() might be called for empty/uninitialized buffer in the
following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes
kernel ops in such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:59:33 -02:00
Mark Brown
aaed44e167 ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore
The gpio_base for the PMIC on the CPU module was being incorrectly set to
be the same as that for the CODEC causing the two GPIO drivers to collide.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-08 19:56:03 +09:00
Mark Brown
4ff13995b5 ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms
The conversion to use SAMSUNG_GPIO_EXTRA rather than S3C24XX_GPIO_EXTRA
broke a number of S3C64xx boards which had been using the symbols provided
to reserve a range of GPIOs for board specific use. Fix this by adding
equivalent symbols for the new shared driver and updating the relevant
boards to use the new symbols.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-08 19:56:02 +09:00
Mark Brown
b462c20e29 ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA
The conversion of the S3C64XX GPIOs to the generic Samsung GPIOs mean that
rather than using the previous S3C24XX_GPIO_EXTRA configuration the driver
now uses SAMSUNG_GPIO_EXTRA.

Since SAMSUNG_GPIO_EXTRA requires the arch to include the extra space in
ARCH_NR_GPIOs add it on to BOARD_NR_GPIOs (in case boards are relying on
the existing reservation).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-08 19:56:02 +09:00
Kuninori Morimoto
202113912b ASoC: ak4642: ak4642 was tested
ak4642 was tested by ms7724se board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 10:52:24 +00:00
Kuninori Morimoto
8918b843af ASoC: fsi: fixup compile warning
This patch fixup below warning

${linux}/sound/soc/sh/fsi.c:442:3:\
 warning: passing argument 1 of '__fsi_reg_read' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:517:3: \
 warning: passing argument 1 of '__fsi_reg_write' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:663:3: \
 warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\
 from integer without a cast

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 10:52:24 +00:00
Eric Anholt
14660ccd59 drm/i915: Fix object refcount leak on mmappable size limit error path.
I've been seeing memory leaks on my system in the form of large
(300-400MB) GEM objects created by now-dead processes laying around
clogging up memory.  I usually notice when it gets to about 1.2GB of
them.  Hopefully this clears up the issue, but I just found this bug
by inspection.

Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08 10:50:36 +00:00
Keith Packard
a08185a3eb agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set
Kernels with no iommu support cannot ever need the Ironlake
work-around, so never enable it in that case.

Might be better to completely remove the work-around from the kernel
in this case?

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
2011-11-08 10:50:27 +00:00
Dan Carpenter
35b09c9bf6 drm/i915: fix if statement (bogus semi-colon)
The semi-colon is a typo here and it makes the if statement
unconditional.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08 10:50:18 +00:00
Mark Brown
41966710ab Merge branch 'for-3.2' into for-3.3 2011-11-08 10:47:46 +00:00
Mark Brown
1dd6c0770d Merge branch 'for-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2 2011-11-08 10:37:41 +00:00
Michael Krufky
8c8ee11345 [media] tda18271: add tda18271_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:25:15 -02:00
Michael Krufky
d697b4ce94 [media] mxl5007t: add mxl5007t_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:24:13 -02:00
Michael Krufky
f7901f9b4a [media] mxl111sf: add mxl111sf_tuner_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:23:22 -02:00
Archit Taneja
b923d40dd4 ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Resetting DISPC when a DISPC output is enabled causes the DSS to go into an
inconsistent state. Thus if the bootloader has enabled a display, the hwmod code
cannot reset the DISPC module just like that, but the outputs need to be
disabled first.

Add function dispc_disable_outputs() which disables all active overlay manager
and ensure all frame transfers are completed.

Modify omap_dss_reset() to call this function and clear DSS_CONTROL,
DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the
DSS2 driver starts.

This resolves the hang issue(caused by a L3 error during boot) seen on the
beagle board C3, which has a factory bootloader that enables display. The issue
is resolved with this patch.

Thanks to Tomi and Sricharan for some additional testing.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: R, Sricharan <r.sricharan@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
[paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed
 cpu_is_omap*() calls and converted to dev_attr]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:46 -07:00
Tomi Valkeinen
13662dc5b1 ARM: OMAP: HWMOD: Unify DSS resets for OMAPs
This patch adds a custom DSS reset function used on OMAPs from OMAP2
forward.

The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is handled independently.

This fixes the problem with DSS reset on OMAP4, caused by the fact that
because there's no SW reset for dss_core on OMAP4, the HWMOD framework
doesn't try to reset dss_core and thus the DSS clocks were never enabled
at the same time. This causes causes the HWMOD reset to fail for
dss_dispc and dss_rfbi.

The common reset function will also allow us to fix another problem in
the future: before doing a reset we need to disable DSS outputs, which
are in some cases enabled by the bootloader, as otherwise DSS HW seems
to get more or less stuck, requiring a power reset to recover.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o
 unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:13 -07:00
Tomi Valkeinen
3ce32676bb ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss
OMAP2/3 dss_core has a reset status flag in sysstatus register. Add
SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:12 -07:00
Tomi Valkeinen
4d0698d98f ARM: OMAP4: HWMOD: fix DSS clock data
The OMAP4 HWMOD data currently contains errors with DSS clocks:

dss_hdmi and dss_venc have their main_clks wrong. The clocks should be
dss_48mhz_clk and dss_tv_clk, respectively.

These problems were temporarily fixed with the DSS patches
9ede365aa6 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3"), and df5d3ed23c ("OMAP:
DSS2: HDMI: fix hdmi clock name"), which can be reverted after this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:12 -07:00
Tomi Valkeinen
37ad085527 ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core
DSS needs all DSS clocks to be enabled to be able to finish reset
properly. Before v3.1-rc1 the omapdss driver was managing clocks and
resets correctly. However, when omapdss started using runtime PM at
v3.1-rc1, the responsibility for the reset moved to HWMOD framework.

HWMOD framework does not currently enable all the DSS clocks when
resetting the DSS hardware. This causes the HWMOD frameworks boot-time
reset to fail, possibly leaving the DSS hardware in undefined state.

This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag
is actually not used on OMAP4, because dss_core hardware does not have
soft-reset functionality and thus the HWMOD framework never resets nor
waits for the reset to finish.

However, while the flag is not strictly needed currently, I think it
represents the HW correctly: all the DSS clocks should be enabled after
power-on to allow DSS hardware to finish its reset.

A custom reset function will be added in the following patches which
manages this correctly for OMAP4.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:11 -07:00
Tomi Valkeinen
4247878efc ARM: OMAP4: HWMOD: remove extra clocks
Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already
defined as the dss main_clk, and thus is not needed as an opt-clock.

Remove opt-clocks for dss_dispc, as dispc only uses the main_clk.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:11 -07:00
Tomi Valkeinen
6c3d7e34d6 ARM: OMAP3: HWMOD: fix DSS clock data
The OMAP3 HWMOD data currently contains these errors with DSS clocks:

- dss_rfbi is missing ick opt-clock, which is needed for RFBI to
  calculate timings

- dss_dsi is missing ick and sys_clk

- dss_venc is missing dss_96m_fck opt-clock, which is required on
  OMAP3430

- dss_venc's interface and main clocks are wrong, causing VENC to fail
  to start

These problems were temporarily fixed with a DSS patch
9ede365aa6 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3"), which can be reverted after this patch (and the similar
patches for other OMAPs).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:10 -07:00