Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.19/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.19/scsi-queue
This patch series includes four patches, with two main functional changes:
1. smartpqi-Add-timeout-value-to-RAID-path-requests-to-physical-devices
Sets a timeout value for requests sent to physical devices via the
RAID path. This prevents the controller firmware from waiting
indefinitely and allows it to time out requests a few seconds before
the OS issues Target Management Function (TMF) commands.
The timeout value sent to the firmware is set to 3 seconds less than
the OS timeout, which significantly reduces TMF invocations.
2. smartpqi-fix-Device-resources-accessed-after-device-removal
Fixes a race condition during device removal by:
* Checking for device removal in the reset handler and canceling any
pending reset work if the device is no longer present.
* Canceling outstanding TMF work items in the .sdev_destroy handler.
Together, these changes eliminate races between reset operations
and device removal.
The other two patches:
3. smartpqi-add-new-Hurray-Data-pci-device
Adds support for new Hurray Data PCI device.
No functional changes.
4. smartpqi-update-driver-version-to-2.1.36-026
Updates the driver version string.
No functional changes.
Link: https://patch.msgid.link/20251106163823.786828-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver version to 2.1.36-026
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for new Hurray Data controller.
All entries are in HEX.
Add PCI IDs for Hurray Data controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 207d 4840
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct possible race conditions during device removal.
Previously, a scheduled work item to reset a LUN could still execute
after the device was removed, leading to use-after-free and other
resource access issues.
This race condition occurs because the abort handler may schedule a LUN
reset concurrently with device removal via sdev_destroy(), leading to
use-after-free and improper access to freed resources.
- Check in the device reset handler if the device is still present in
the controller's SCSI device list before running; if not, the reset
is skipped.
- Cancel any pending TMF work that has not started in sdev_destroy().
- Ensure device freeing in sdev_destroy() is done while holding the
LUN reset mutex to avoid races with ongoing resets.
Fixes: 2d80f4054f ("scsi: smartpqi: Update deleting a LUN via sysfs")
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a timeout value to requests sent to physical devices via the RAID
path.
A timeout value of zero means wait indefinitely, which may cause the OS
to issue Target Management Function (TMF) commands if the device does
not respond.
For input timeouts of 8 seconds or greater, the value sent to firmware
is reduced by 3 seconds to provide an earlier firmware timeout and allow
the OS additional time before timing out.
This change improves timeout handling between the driver, firmware, and
OS, helping to better manage device responsiveness and avoid indefinite
waits.
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() uses
WORK_CPU_UNBOUND (used when a CPU is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be
addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
Continue the effort to refactor workqueue APIs, which has begun with the
change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be
per-CPU when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20251105150336.244079-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With commit 9604eea5bd ("scsi: st: Add third party poweron reset
handling") some customer tape applications fail from being unable to
complete ioctls to verify ID information for the device when there has
been any type of reset event to their tape devices.
The st driver currently will fail all standard SCSI ioctls if a call to
flush_buffer() fails in st_ioctl(). This causes ioctls which otherwise
have no effect on tape state to succeed or fail based on events
unrelated to the requested ioctl.
This makes SCSI information ioctls unreliable after a reset even if no
buffering is in use. With a reset setting the pos_unknown field,
flush_buffer() will report failure and fail all ioctls. So any
application expecting to use ioctls to check the identify the device
will be unable to do so in such a state.
For SCSI information ioctls, avoid the need for a buffer flush and allow
the ioctls to execute regardless of buffer state.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Link: https://patch.msgid.link/20251104154709.6436-2-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The st ioctl function currently interleaves code for handling various st
specific ioctls with parts of code needed for handling ioctls common to
all SCSI devices. Separate out st's code for the common ioctls into a
more manageable, separate function.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Link: https://patch.msgid.link/20251104154709.6436-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace Stanley Chu with me and Chaotian in the maintainers field, since
his email address is no longer active.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251103115808.3771214-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In stex_probe(), register_reboot_notifier() is called at the beginning,
but if any subsequent initialization step fails, the function returns
without unregistering the notifier, resulting in a resource leak.
Add unregister_reboot_notifier() in the out_disable error path to ensure
proper cleanup on all failure paths.
Fixes: 61b745fa63 ("scsi: stex: Add S6 support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251104094847.270-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus tree. They fix/improve the
stats used in the main IO path. The first patch fixes an issue where
I made some stats u32 when they should have stayed u64. The rest of
the patches improve the handling of RW/num_cmds stats to reduce code
duplication and improve performance.
Link: https://patch.msgid.link/20250917221338.14813-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The atomic use in the main I/O path is causing perf issues when using
higher performance backend devices and multiple queues (more than
10 when using vhost-scsi) like with this fio workload:
[global]
bs=4K
iodepth=128
direct=1
ioengine=libaio
group_reporting
time_based
runtime=120
name=standard-iops
rw=randread
numjobs=16
cpus_allowed=0-15
To fix this issue, move the LUN stats to per CPU.
Note: I forgot to include this patch with the delayed/ordered per CPU
tracking and per device/device entry per CPU stats. With this patch you
get the full 33% improvements when using fast backends, multiple queues
and multiple IO submiters.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create some macros to reduce code duplication for when we handle per-CPU
stats. Convert the existing LUN and auth cases.
Note: This is similar to percpu_counters but they only support s64 since
they are also used for non-stat counters where you need to handle/prevent
rollover more gracefully. Our use is just for stats where the spec
defines u64 use plus we already have some files exporting u64 values so
it's not possible to directly use percpu_counters.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
I saw we sometimes use %u and also misread the spec. As a result I
thought all the stats were supposed to be 32-bit only. However, for the
majority of cases we support currently, the spec specifies u64 bit
stats. This patch converts the stats changed in the commit above to u64.
Fixes: 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check whether or not the conversion of the argument to an integer
succeeded. Reject invalid timeout values.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031221844.2921694-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace Stanley Chu with me and Chaotian in the maintainers field since
Stanley's email address is no longer active.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251031122008.1517549-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the stack buffer 'buf'. This patch does not modify the output
produced by target_lu_gp_members_show().
An example of the output that is produced with this patch applied:
$ cat /sys/kernel/config/target/core/alua/lu_gps/default_lu_gp/members
fileio_0/vdev0
fileio_1/vdev1
iblock_0/vdev2
$ od -c /sys/kernel/config/target/core/alua/lu_gps/default_lu_gp/members
0000000 f i l e i o _ 0 / v d e v 0 \n f
0000020 i l e i o _ 1 / v d e v 1 \n i b
0000040 l o c k _ 0 / v d e v 2 \n
0000055
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251027184639.3501254-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NUL characters are not allowed in ASCII configfs output. Hence this
patch.
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251027184639.3501254-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry <john.g.garry@oracle.com> says:
This is a reposting of Mike's atomic writes support for the SCSI
target.
Again, we are now only supporting target_core_iblock. It's implemented
similar to UNMAP where we do not do any emulation and instead pass the
operation to the block layer.
Link: https://patch.msgid.link/20251020103820.2917593-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make target_core_iblock use the LIO helper function to translate its
block_device atomic settings to LIO settings. If we then get a write
that LIO has indicated is atomic via the SCF_ATOMIC flag, we use the
REQ_ATOMIC flag to tell the block layer to perform an atomic write.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report if the device supports WRITE_ATOMIC_16 in the
REPORT_SUPPORTED_OPERATION_CODES command.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report the atomic values in the Block Limits VPD page.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: handle not having atomic_supported attribute
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the core LIO code to process the WRITE_ATOMIC_16 command.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: fix return code from sbc_check_atomic, reformat
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper function that sets up the atomic value based on a
block_device similar to what we do for unmap.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: Set atomic alignment, drop atomic_supported reference
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add atomic fields to the se_device and export them in configfs.
Initially only target_core_iblock will be supported and we will inherit
all the settings from the block layer.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: Stop being allowed to configure atomic write alignment,
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-3-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename target_configure_unmap_from_queue() to
target_configure_unmap_from_bdev() since it now takes a bdev.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-2-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "reg" in top-level has maxItems:2, thus repeating this in "if:then:"
blocks is redundant. Similarly number of items cannot be less than 1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251027113107.75835-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the UFS host controller on the AMD Versal Gen 2 SoC,
built on the Synopsys DWC UFS architecture, using the UFSHCD DWC and
UFSHCD platform driver. This controller requires specific configurations
like M-PHY/RMMI/UniPro and vendor specific registers programming before
doing the UIC_LINKSTARTUP.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-5-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add devicetree document for UFS Host Controller on AMD Versal Gen 2 SoC.
This includes clocks and clock-names as mandated by UFS common bindings.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Co-developed-by: Ajay Neeli <ajay.neeli@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-2-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both mbox_cmd and mbox_sts have the same size, so using sizeof(mbox_cmd)
when clearing mbox_sts did not cause any functional issue. However, it
is misleading and reduces code readability.
Update the memset() calls to use sizeof(mbox_sts) to make the intent
clear
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251021090354.1804327-1-alok.a.tiwari@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
aac_queuecommand() is a scsi_host_template.queuecommand()
implementation. Any value returned by this function other than one of
the following values is translated into SCSI_MLQUEUE_HOST_BUSY:
* 0
* SCSI_MLQUEUE_HOST_BUSY
* SCSI_MLQUEUE_DEVICE_BUSY
* SCSI_MLQUEUE_EH_RETRY
* SCSI_MLQUEUE_TARGET_BUSY
Improve readability of aac_queuecommand() by returning
SCSI_MLQUEUE_HOST_BUSY instead of FAILED.
Cc: Gilbert Wu <gilbert.wu@microchip.com>
Cc: Sagar Biradar <Sagar.Biradar@microchip.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251021201743.3539900-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver calls asc_prt_scsi_host() -> scsi_host_busy() prior to
calling scsi_add_host(). This should not be done, and has raised issues
for other drivers, like [0].
Function asc_prt_scsi_host() only has a single callsite, as above, where
the shost busy count would always be 0.
Avoid printing the shost busy count to avoid this problem.
[0] https://lore.kernel.org/linux-scsi/20251014200118.3390839-3-bvanassche@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251023085451.3933666-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I guess that the @shost comment on scsi_host_busy() was copied from
scsi_host_get() (as it is the same), however they do not do the same
thing.
Also drop reference to busy counter, which has been removed.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251023082759.3927000-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series includes two bug fixes for this development cycle
and six small patches that are intended for the next merge window. If
applying the first two patches only during the current development
cycle would be inconvenient, postponing all patches until the next
merge window is fine with me.
Please consider including these patches in the upstream kernel.
Thanks,
Bart.
[mkp: Applied patches #1 and #2 to 6.18/scsi-fixes]
Link: https://patch.msgid.link/20251014200118.3390839-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify ufshcd_mcq_sq_cleanup() by using guard(mutex)() instead of
explicit mutex_lock() and mutex_unlock() calls. No functionality has
been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return directly instead of jumping to a return statement. No
functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_enable_intr() is not exported and hence should not be declared in
include/ufs/ufshcd.h.
Fixes: 2537577979 ("scsi: ufs: core: Change MCQ interrupt enable flow")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the UFS_DEV_COMP constant because it is not used.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since uic_command::cmd_active is used as a boolean variable, change its
type from 'int' into 'bool'. No functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it easier to find the sections in the UFSHCI standard where these
constants come from.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building the qla1280 driver with DEBUG_QLA1280 set will emit compiler
warnings. Fix some print formatting strings to reflect the correct type
of printed variables as well as remove unused code. (static function
ql1280_dump_device) in order to avoid compiler warnings.
[mkp: fixed a few more checkpatch warnings]
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20251002052604.24590-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang <peter.wang@mediatek.com says>:
Improves the UFS Mediatek driver by correcting clock scaling with PM
QoS, and adjusting power management flows. It addresses
shutdown/suspend race conditions, and removes redundant
functions. Support for new platforms is added with the MMIO_OTSD_CTRL
register, and MT6991 performance is optimized with MRTT and random
improvements. These changes collectively enhance driver performance,
stability, and compatibility.
Changes since v1:
1. Remove two patches that will be fixed in UFS core.
- ufs: host: mediatek: Fix runtime suspend error deadlock
- ufs: host: mediatek: Enable interrupts for MCQ mode
2. Use hba->shutting_down instead of ufshcd_is_user_access_allowed
v1:
https://patch.msgid.link/20250918104000.208856-1-peter.wang@mediatek.com
Link: https://patch.msgid.link/20250924094527.2992256-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the MT6991 platform by enabling MRTT settings and random
performance improvements. These enhancements aim to optimize performance
and efficiency on the MT6991 hardware.
Enable multi-Round Trip Time (MRTT) for improved data handling. Enable
random performance improvement features to boost overall system
responsiveness.
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-9-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce support for a new UFS Mediatek platform by adding the
REG_UFS_UFS_MMIO_OTSD_CTRL register. This update includes checks for
legacy platforms and uses the new register to replace debug selection
and handle specific operations. The changes ensure compatibility across
different hardware versions and prevent potential issues with debug
usage on newer platforms.
Additional updates include error logging improvements during link setup
for newer and legacy platforms, ensuring proper event logging and
debugging.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
