Fix virtual vs physical address confusion (which currently are the
same).
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change format of the "cmg" sysfs attribute from hex to decimal to
make it easier to consume. Note that this should not break any existing
users since only values 2 and 3 are currently exported. Also the main
user already assumes decimal notation [1].
[1] https://sourceforge.net/p/sblim/gather/ci/master/tree/plugin/metriczCH.c
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. All pages used for swapper_pg_dir
and invalid_pg_dir are incorrectly marked as no-dat, which in turn can
result in incorrect guest TLB flushes.
Fix this by marking those pages correctly as being used for DAT.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.
This can result in incorrect guest TLB flushes.
Fix this by simply marking all four pages.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When new memory notifier types are added in common code and
unimplemented on s390, return success instead of EINVAL return code.
This prevents breakage when new memory notifier types are added.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Function paicrypt_event_init() initializes the PMU device driver
specific details for an event. It is called once per event creation.
The function paicrypt_event_init() is not necessarily executed on
that CPU the event will be used for.
When an event is activated, function paicrypt_start() is used to
start the event on that CPU.
The per CPU data structure struct paicrypt_map has a pointer to
the event which is active for a particular CPU. This pointer is
set in function paicrypt_start() to point to the currently installed
event. There is no need to also set this pointer in function
paicrypt_event_init() where is might be assigned to the wrong CPU.
Therefore remove this assignment in paicrypt_event_init().
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Event count value is initialized and set to zero in function
paicrypt_start(). This function is called once per CPU when an
event is started on that CPU. This leads to event count value
being set to zero as many times as there are online CPUs.
This is not necessary. The event count value is bound to the event
and it is sufficient to initialize the event counter once at
event creation time. This is done when the event structure
is dynamicly allocated with __GFP_ZERO flag. This sets
member count to zero.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use define PERF_ATTACH_TASK bit in event->attach_state to determine
system wide invocation or per task invocation in event initialization.
This bit is set in common code and before calling PMU device driver
specific event initialization.
It is set once and never changes. It is save to use and also in
sync with other PMU specific code.
No functional change.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region, segment, and page tables allocated within the gmap code are
incorrectly marked as "no-dat", since an explicit call to
arch_set_page_dat() is missing, which would remove the "no-dat" mark.
In order to fix this add a new gmap_alloc_crst() function which should
be used to allocate region and segment tables, and which also calls
arch_set_page_dat().
Also add the arch_set_page_dat() call to page_table_alloc_pgste().
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region and segment tables allocated via vmem_crst_alloc() are incorrectly
marked as "no-dat", as soon as slab_is_available() returns true.
Such tables are allocated e.g. when kernel page tables are split, memory is
hotplugged, or a DCSS segment is loaded.
Fix this by adding the missing arch_set_page_dat() call.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however does not
cover the complete kernel address space. This can result in pages being
marked as not being used for dynamic address translation, even though they
are. In turn guest TLB entries incorrectly may not be purged.
Fix this by adjusting the end address of the kernel address range being
walked.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Diagnose 224 expects a physical address, but all users pass a virtual
address. Translate the address to fix this.
Reported-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of do_fault_error() and move its contents to do_exception(),
which makes do_exception(). With removing do_fault_error() it is also
possible to get rid of the handle_fault_error_nolock() wrapper.
Instead rename do_no_context() to handle_fault_error_nolock().
In result the whole fault handling looks much more like on other
architectures.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove the last two private vm_fault reasons: VM_FAULT_BADMAP and
VM_FAULT_BADACCESS.
In order to achieve this add an si_code parameter to do_no_context()
and it's wrappers and directly call the wrappers instead of relying on
do_fault_error() handling.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove VM_FAULT_SIGNAL and open-code it at the only two locations
where it is used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove VM_FAULT_BADCONTEXT and instead call do_no_context() via
wrappers. This adds two new wrappers similar to what x86 has:
handle_fault_error() and handle_fault_error_nolock(). Both of them
simply call do_no_context(), while handle_fault_error() also unlocks
mmap lock, which avoids adding lots of mmap_read_unlock() calls with
this and subsequent patches.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
do_no_context() can be simplified by removing its fault parameter,
which is only used to decide if kfence_handle_page_fault() should be
called.
If the fault happened within the kernel space it is ok to always check
if this happened on a page which was unmapped because of the kfence
feature. Limiting the check to the VM_FAULT_BADCONTEXT case doesn't
add any value.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove duplicated fault error handling and handle it only once within
do_exception().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is only one caller of do_low_address(). Given that this code is
quite special just get rid of do_low_address, and add it to
do_protection_exception() in order to make the code a bit more
readable.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Handling of VM_FAULT_PFAULT and VM_FAULT_BADCONTEXT is nearly identical;
the only difference is within do_no_context() where however the fault_type
(KERNEL_FAULT vs GMAP_FAULT) makes sure that both types will be handled
differently.
Therefore it is possible to get rid of VM_FAULT_PFAULT and use
VM_FAULT_BADCONTEXT instead.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The page table dumper uses get_kernel_nofault() to test if dereferencing
page table entries is possible. Use the result, which is the required page
table entry, instead of throwing it away and dereferencing a second time
without any safe guard.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of some magic numbers, and use the teid union and also some
ptrace PSW defines to improve readability.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move translation-exception identification structure to new fault.h
header file, change it to a union, and change existing kvm code
accordingly. The new union will be used by subsequent patches.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Generate slightly better code by using a static key to implement store
indication. This allows to get rid of a memory access on the hot path.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the get_fault_address() helper function instead of open-coding it
at many locations.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
do_secure_storage_access() contains a switch statements which handles
all possible return values from get_fault_type(). Therefore remove the
pointless default case error handling and replace it with unreachable().
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove all noinline attribute from all functions and leave the
inlining decisions up to the compiler.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove unnecessary braces and also blanks after casts.
Add braces to have balanced braces where missing.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Just like other architectures make use __ratelimit() instead of
printk_ratelimit().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove wrong, outdated, and pointless comments. Adjust wording for
some comments, and adjust whitespace at some places.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Struct paicrypt_map is a data structure and is statically defined
for each possible CPU. Rework this and replace it by dynamically
allocated data structures created when a perf_event_open() system call
is invoked.
It is replaced by an array of pointers to all possible CPUs and
reference counting. The array of pointers is allocated when the first
event is created. For each online CPU an event is installed on, a struct
paicrypt_map is allocated and a pointer to struct cpu_cf_events is
stored in the array:
CPU 0 1 2 3 ... N
+---+---+---+---+---+---+
paicrypt_root::mapptr--> | * | | | |...| |
+-|-+---+---+---+---+---+
|
|
\|/
+--------------+
| paicrypt_map |
+--------------+
With this approach the large data structure is only allocated when
an event is actually installed and used.
Also implement proper reference counting for allocation and removal.
PAI crypto counter events can not be created when a CPU hot plug
add is processed. This means a CPU hot plug add does not get
the necessary PAI event to record PAI cryptography counter increments
on the newly added CPU. There is no possibility to notify user space
of a new CPU and the necessary event infrastructure assoiciated with
the file descriptor returned by perf_event_open() system call.
However system call perf_event_open() can use the newly added CPU
when issued after the CPU hot plug add.
Kernel CPU hot plug remove deletes the CPU and stops the PAI counters on
that CPU. When the process closes the file descriptor associated
with that event, the event's destroy() function removes any
allocated data structures and adjusts the reference counts.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of this W=1 compile warning:
arch/s390/mm/vmem.c:502:6: warning: no previous prototype for ‘vmemmap_free’ [-Wmissing-prototypes]
502 | void vmemmap_free(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove unnecessary __GFP_HIGHMEM masking, which was introduced with
commit 6326c26c15 ("s390: convert various pgalloc functions to use
ptdescs"). Also remove a whitespace change which was introduced with
the same commit.
Link: https://lore.kernel.org/all/CAOzc2px-SFSnmjcPriiB3cm1fNj3+YC8S0VSp4t1QvDR0f4E2A@mail.gmail.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Implement load_unaligned_zeropad() and enable DCACHE_WORD_ACCESS to
speed up string operations in fs/dcache.c and fs/namei.c.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide an s390 specific word-at-a-time implementation. Compared to the
generic variant the generated code for has_zero() is slightly
better. However find_zero() is much simpler since it reuses the result
of __fls() aka flogr() and now comes without any conditional branches,
while the generic variant has three of them.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of __EX_TABLE() macro, rename __EX_TABLE_UA() to __EX_TABLE()
and convert users of old __EX_TABLE() macro so they pass more parameters
to the changed __EX_TABLE() semantics.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Funciton loads_init() does not use loads_offset parameter.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With Secure Execution the error reply RX 0x8B now carries
an APFS value indicating why the request has been filtered
by a lower layer of the firmware. So display this value
as a warning line in the s390 debug feature trace.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces a new AP queue internal attribute
se_bound which reflects the bound state of an APQN within
a Secure Execution environment.
With introduction of Secure Execution guests now an
AP firmware queue needs to be bound to the guest before
usage. This patch introduces a new internal attribute
reflecting this bound state and some glue code to handle
this new field during lifetime of an AP queue device.
Together with that now the zcrypt scheduler considers
the state of the AP queues when a message is about to be
distributed among the existing queues. There is a new
function ap_queue_usable() which returns true only when
all conditions for using this AP queue device are fulfilled.
In details this means: the AP queue needs to be configured,
not checkstopped and within an SE environment it needs
to be bound. So the new function gives and indication
if the AP queue device is ready to serve requests or not.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes: 2d72eaf036 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use control register bit defines instead of plain numbers where
possible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
