Bump the driver version to reflect the new DRM_PANTHOR_DEV_QUERY_MMU_INFO
query type and the DRM_PANTHOR_VM_BIND_OP_MAP_SPARSE flag.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-7-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Allow UM to bind sparsely populated memory regions by cyclically mapping
virtual ranges over a kernel-allocated dummy BO. This alternative is
preferable to the old method of handling sparseness in the UMD, because it
relied on the creation of a buffer object to the same end, despite the fact
Vulkan sparse resources don't need to be backed by a driver BO.
The choice of backing sparsely-bound regions with a Panthor BO was made so
as to profit from the existing shrinker reclaim code. That way no special
treatment must be given to the dummy sparse BOs when reclaiming memory, as
would be the case if we had chosen a raw kernel page implementation.
A new dummy BO is allocated per open file context, because even though the
Vulkan spec mandates that writes into sparsely bound regions must be
discarded, our implementation is still a workaround over the fact Mali CSF
GPUs cannot support this behaviour on the hardware level, so writes still
make it into the backing BO. If we had a global one, then it could be a
venue for information leaks between file contexts, which should never
happen in DRM.
As a side note, care was put to adjust dummy BO offsets for sparse mappings
so that all addresses in the new VA are mapped aligned against it.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260522185206.2798288-6-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
A Panthor BO's sgtable is now retrieved from its dmap field.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-5-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
There's no extra blank line after the last member of any other uAPI
structures, so delete it.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-4-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Instead of passing its constituent elements, pass the whole struct to
simplify the function prototype.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-3-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
In future commits that will implement repeated mappings, only repeat
values multiple of GPU page sizes will be tolerated. That means these
values must be made known to UM. Do it through a queriable GPU info
value.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-2-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Inline the panel initialization command sequences and remove the
table-based command abstraction used by the NT36672A panel driver.
Replace the nt36672a_panel_cmd tables and nt36672a_send_cmds()
helper with explicit initialization functions using
mipi_dsi_dcs_write_seq_multi() and
mipi_dsi_dcs_write_var_seq_multi() directly.
This improves readability by making the panel programming sequence
explicit in code and allows future sharing of common command
subsequences between panels. It also removes an unnecessary wrapper
around the MIPI DSI helpers.
Additionally, compress repeated register writes into small loops where
appropriate to reduce duplication in the initialization sequences.
Add:
tianma_fhd_video_send_init_cmds_1()
tianma_fhd_video_send_init_cmds_2()
tianma_fhd_video_send_deinit_cmds()
Update nt36672a_panel_desc to use function pointers for panel init
sequences and invoke them directly from prepare/unprepare paths.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260523035734.6602-1-chintanlike@gmail.com
Glyph-shape lookup has been integrated into the font-data interface
and all callers have been updated. Remove the old helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260529140759.529929-5-tzimmermann@suse.de
Add font_data_glyph_buf() to retrieve a character's glyph data or NULL
otherwise. Console fonts can currently contain 256 or 512 glyphs. The
kernel-internal characters are of type char, unsigned short or unsigned
int. Catch all of them by accepting unsigned int. Callers possibly have
to cast from signed to unsigned types to reach all glyphs in a font.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260529140759.529929-2-tzimmermann@suse.de
drm_sched contains a lockless queue (spsc_queue) that seems to be
useless and potentially unsound.
Add a TODO list entry for replacing spsc_queue with a locked list.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260529215207.115513-2-phasta@kernel.org
Kernel-doc of drmm_add_action() references @releases which is not
on argument list. Swap '@' between 'releases' and 'action' words to fix
the documentation.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260522135520.1862848-3-michal.grzelak@intel.com
Setting 6th or 9th bit of drm.debug change debug logging. Meanwhile
`modinfo drm` does not inform about it at all.
Add info to MODULE_PARAM_DESC(debug, ...) about setting 6th and 9th bit
basing on DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, ...). Match
description of corresponding bits with enum drm_debug_category. Include
9th bit in the example with enabling all possible logging provided at
comment at include/drm/drm_print.h.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260522135520.1862848-2-michal.grzelak@intel.com
Replace two nested max() calls with a single max3() in dma_heap_ioctl().
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260517172352.3615-2-thorsten.blum@linux.dev
Add a new test suite to simulate concurrent job submissions to the DRM
scheduler, as this functionality is not covered by current test suites.
The new test suite includes two initial test cases: (i) a test case for
parallel job submission and (ii) a test case for interleaved job
submission and completion. In the first test case, worker threads
concurrently submit jobs to the scheduler, and then the timeline is
manually advanced to complete them in bulk. In the second test case,
worker threads concurrently submit sequences of jobs of different
durations to the mock scheduler using a sliding window to better model
real-world workloads. The timeline is advanced automatically by the
finishing jobs, interleaving submission with completion.
Signed-off-by: Marco Pagani <marco.pagani@linux.dev>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260520093350.1036001-1-marco.pagani@linux.dev
virtio_gpu_queue_ctrl_sgs() and virtio_gpu_queue_cursor() use
wait_event() without any abort condition when waiting for virtqueue
space. If the host device stops processing commands, these waits block
indefinitely inside a drm_dev_enter/exit() critical section. Since
drm_dev_unplug(), which is called in device removal and system shutdown
call path, blocks on synchronize_srcu() until all critical sections
complete, device removal and system shutdown also hang.
Add a vqs_released flag to virtio_gpu_device and include it in the
wait_event() condition. Set the flag and wake up both queues in a new
virtio_gpu_release_vqs() helper, called before drm_dev_unplug() in both
virtio_gpu_remove() and virtio_gpu_shutdown(). When the flag is set, the
wait returns immediately and the command is aborted, following the same
cleanup path as drm_dev_enter() failure.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260601-virtio-gpu_wait_event-v3-1-89530517a98a@redhat.com
Convert analogix_dp_is_slave_video_stream_clock_on() and
analogix_dp_is_video_stream_on() from int to bool return type.
This makes the code more readable and aligns with kernel best
practices for boolean status checks, while simplifying the
callers by removing unnecessary "== 0" comparisons.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260521102716.1373519-1-damon.ding@rock-chips.com
rockchip_drm_sys_resume()/drm_mode_config_helper_resume() is called
before the resume pm ops of dw-hdmi. This result in an atomic_enable()
before dw_hdmi_rockchip_resume()/dw_hdmi_resume() is called.
Resume (without changes):
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
- dw_hdmi_rockchip_resume()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
Change to use resume_early pm ops for system suspend to ensure pm ops
for dw-hdmi is run before rockchip-drm pm ops. Also fix a possible NULL
pointer dereference timing issue while at it.
Resume (with changes):
- dw_hdmi_rockchip_resume_early()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
The HDMI block is currently hardcoded to expect RGB output from the
display controller. However, the VOP in some SoCs are capable of YCbCr
output to the HDMI block.
Read the negotiated bus format from the bridge state and propagate it to
the CRCT state in form of output mode and bus format. Treat the format
MEDIA_BUS_FMT_FIXED as RGB888 and reject any unsupported formats.
This has no inpact until dw-hdmi bridge is fully converted to a HDMI
bridge and also adds support for the "color format" connector property.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-11-jonas@kwiboo.se
The HDMI helpers negotiated TMDS character rate and output bpc are
available from the connector state. Change the encoder helper from
mode_set() to atomic_mode_set() so these values can be used to configure
the HDMI PHY using phy_configure().
This has no impact until the dw-hdmi bridge is fully converted into a
HDMI bridge and HDMI helpers are used to assign hdmi.tmds_char_rate.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-10-jonas@kwiboo.se
All in-tree RK3568/RK3566 device trees using HDMI also include the
required hdmi-connector node at port@1 since their introduction.
Define the output_port for RK3568 so that dw-hdmi bridge driver can pick
up the display-connector bridge once the dw-hdmi connector is replaced
with a bridge connector in a future change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-9-jonas@kwiboo.se
Move the blank line before the RK3328 definitions for readability and
make the phy_config table spacing consistent with other tables.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-8-jonas@kwiboo.se
Remove the empty disable() and static return true mode_fixup() encoder
helper funcs as they do not provide any useful functionality.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-7-jonas@kwiboo.se
Take a reference on the dw-hdmi bridge during bind and drop it again
from unbind to ensure the bridge is kept alive for the lifetime of the
encoder component.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-6-jonas@kwiboo.se
Inline rockchip_hdmi_parse_dt() into dw_hdmi_rockchip_bind() so the
probe path is easier to follow in one place. Also ensure failures in
bind() use dev_err_probe() so probe deferrals and errors are reported
consistently.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-5-jonas@kwiboo.se
Change to use drmres helpers drmm_kzalloc() to allocate driver data
and drmm_encoder_init() to initialize the encoder. With use of drmres
the manual encoder cleanup in failure path and unbind is also removed.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-4-jonas@kwiboo.se
Replace indirect struct device accesses via hdmi->dev and pdev->dev with
the local dev parameter already available in dw_hdmi_rockchip_bind(),
for consistency and readability.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-3-jonas@kwiboo.se
Change to use of_device_get_match_data() to get match data prior to
allocating private data. All current entries in the of_device_id match
table provide match data, so no functional change is intended.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-2-jonas@kwiboo.se
RK3576 integrates Analogix eDP 1.3 TX and Samsung combo PHY
hardware blocks that fully match the proven RK3588 design.
Add dedicated chip data table and device tree matching entry
to bring up basic eDP functionality for the RK3576 platform.
Support is limited to RGB output up to 4K@60Hz for now; audio,
PSR and other advanced eDP 1.3 features remain unvalidated.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-12-damon.ding@rock-chips.com
Add RK3576_EDP device type entry and extend Rockchip check
to match existing hardware capabilities shared with RK3588.
Set identical maximum link rate and lane count parameters
for RK3576 eDP controller to reuse existing RK3588 config.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-11-damon.ding@rock-chips.com
Acquire and enable the HCLK_VO1 bus clock explicitly for RK3588
eDP controller to guarantee register and datapath access.
The clock was previously enabled implicitly via rockchip,vo-grf
phandle reference, which relies on side effect and is fragile.
Fetch optional "hclk" clock in driver to align with updated device
tree binding and keep consistent with hardware clock dependency.
Fixes: 729f8eefdc ("drm/rockchip: analogix_dp: Add support for RK3588")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-6-damon.ding@rock-chips.com
Supplement dedicated description for each clock in the clocks
property, clarifying the function of each clock input for the
Analogix DP controller binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-3-damon.ding@rock-chips.com
RK3588 eDP controller requires HCLK_VO1 to access the VO1 GRF
registers and enable the video datapath.
Previously, the clock was enabled implicitly via the 'rockchip,vo-grf'
phandle reference, which allowed the eDP to work without explicitly
managing the hclk_vo1 clock. However, this is not safe or explicit.
To make the clock dependency explicit, enforce per-SoC clock-names
requirements:
- RK3288: 2 clocks (dp, pclk)
- RK3399: 3 clocks (dp, pclk, grf)
- RK3588: 3 clocks (dp, pclk, hclk)
Do not reuse the 'grf' clock name for RK3588 because it represents
a different clock with distinct control logic:
- The 'grf' clock is only for GRF register access and is toggled
dynamically during register access.
- The 'hclk' clock controls both GRF access and video datapath
gating, and must remain enabled during probe.
Fixes: f855146263 ("dt-bindings: display: rockchip: analogix-dp: Add support for RK3588")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-2-damon.ding@rock-chips.com
After the old_layer_sel local was removed, the only caller of
rk3568_vop2_wait_for_layer_cfg_done() already passes vop2->old_layer_sel
as the expected value.
Drop the redundant parameter and read the member directly inside the
function.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-5-730226a7331e@collabora.com
The layer_sel and atv_layer_sel local variables in
rk3568_vop2_setup_layer_mixer() are unconditionally assigned from
vop2->old_layer_sel and the RK3568_OVL_LAYER_SEL register read,
respectively, before any use.
Remove the superfluous zero-initializers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-4-730226a7331e@collabora.com
The old_layer_sel and old_port_sel local variables were introduced to
hold the previous VP configuration for comparisons and wait targets,
working around the premature update of vop2->old_layer_sel and
vop2->old_port_sel earlier in the function.
Remove these superfluous locals and instead defer the assignments of
vop2->old_layer_sel and vop2->old_port_sel to just before the
corresponding shadow register writes, where the transition from old to
new logically belongs.
No functional change intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-3-730226a7331e@collabora.com
LAYERSEL_REGDONE_SEL mask of RK3568_OVL_CTRL register controls which
Video Port (VP) vsync latches the shared RK3568_OVL_{LAYER|PORT}_SEL
shadow registers into the active configuration.
rk3568_vop2_setup_layer_mixer() overwrites LAYERSEL_REGDONE_SEL to the
current VP ID before waiting for the previous VP layer configuration to
take effect. As a consequence, the previous VP vsync can no longer
trigger the latch, so the wait polls a value that might never appear.
Move the layer cfg done wait before the RK3568_OVL_CTRL write so the
previous VP vsync can still commit the pending configuration.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-2-730226a7331e@collabora.com
rk3568_vop2_setup_layer_mixer() waits for the previous Video Port (VP)
layer configuration to take effect before writing a new one to the
shared RK3568_OVL_LAYER_SEL shadow register. However, it passes
vop2->old_layer_sel to rk3568_vop2_wait_for_layer_cfg_done() as the
expected value, which at that point already contains the new VP layer.
This causes the wait to poll for a value that has not been written to
the shadow register yet, resulting in spurious timeouts when two
non-blocking atomic commits race:
rockchip-drm display-subsystem: [drm] *ERROR* wait layer cfg done timeout [...]
Pass the local old_layer_sel instead, which still holds the value
captured from vop2->old_layer_sel before it was overwritten, i.e. the
previous VP target that the hardware is expected to latch.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-1-730226a7331e@collabora.com
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-drm-rk-fixes-v4-1-c3f3f123e1da@collabora.com
The VOP2 background color must be programmed with 10-bit precision,
using YUV format when the overlay operates in YUV mode, and RGB
otherwise.
Add the required RGB-to-YCbCr conversion logic, covering all color
spaces supported by the display controller: BT601L, BT601F, BT709L and
BT2020L.
Since the color is currently programmed to hardware on every atomic
commit, minimize the computation cost by splitting the work across the
two paths: in atomic_enable(), perform the conversion unconditionally
(the hardware state is unknown after power-on), while in atomic_flush(),
perform it only when the DRM property has actually changed.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-vop2-bg-yuv-v2-2-e5aef1d16fec@collabora.com
Rename CSC_BT2020 to CSC_BT2020L for consistency with the other
limited-range enum members (CSC_BT601L, CSC_BT709L) and to distinguish
it from a potential future full-range BT.2020 variant.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-vop2-bg-yuv-v2-1-e5aef1d16fec@collabora.com
The 100ms autosuspend delay was only ever a workaround: shorter delays
caused more frequent runtime suspend/resume cycles on the BCM2711
(Raspberry Pi 4), which exposed the cache and MMU coherency bugs as
random GPU hangs.
With those hangs resolved, the inflated delay is no longer necessary.
Reduce it from 100ms to 50ms so the GPU power domain can be released
sooner once the GPU goes idle.
Link: https://patch.msgid.link/20260530-v3d-fix-rpi4-freezes-v1-4-c2c8307da6ce@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The Arm Ethos-U NPUs have a PMU with performance counters. The PMU h/w
supports up to 4 (U65) or 8 (U85) counters which can be programmed for
different events. There is also a dedicated cycle counter.
The ABI and implementation are copied from the V3D driver. The main
difference in the ABI is there is no query API for the event list. The
events differ between the U65 and U85, so the events lists are
maintained in userspace along with other differences between the U65 and
U85.
The cycle counter is always enabled when the PMU is enabled. When the
user requests N events, reading the counters will return the N events
plus the cycle counter.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260601173814.250071-1-tomeu@tomeuvizoso.net
---
v2:
- Use XArray instead of idr
- Rework locking to use per device spinlock to protect modifying active
perfmon. Based on pending V3D changes:
https://lore.kernel.org/all/20260508-v3d-perfmon-lifetime-v1-1-f5b5642c085f@igalia.com/
- Add missing perfmon puts in ethosu_ioctl_perfmon_set_global() and
ethosu_ioctl_perfmon_get_values() error paths.
- Fix reading number of counters on U85.
- Add defines NPU_REG_PMCCNTR_CFG
v3:
- Add explicit padding to drm_ethosu_perfmon_destroy
- Fix SPDX license expression
- Fix comment typos
- Convert perfmon lock from spinlock to mutex
- Simplify switch_perfmon condition check
- Remove unused ethosu_perfmon_init
- Add lockdep_assert_held to ethosu_perfmon_stop_locked
v4:
- Use drmm_mutex_init() for perfmon lock
- Add lockdep_assert_held() to ethosu_perfmon_start()
- Fix a few style issues reported by Maíra
