Commit graph

616,985 commits

Author SHA1 Message Date
Arnd Bergmann
e40454d3f4 mvebu soc for 4.9 (part 1)
- irq cleanup for old mvebu SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlfiVscACgkQCwYYjhRyO9W6CwCgi7nU5B3njJGBPsEvgGDJQfVo
 OJsAmgIKmoR0p8QSaZzduzuYOsKs6J+l
 =y9Ea
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-4.9-1' of git://git.infradead.org/linux-mvebu into next/soc

Pull "mvebu soc for 4.9 (part 1)" from Gregory CLEMENT:

- irq cleanup for old mvebu SoC

* tag 'mvebu-soc-4.9-1' of git://git.infradead.org/linux-mvebu:
  ARM: orion5x: remove extraneous NO_IRQ
  ARM: orion: simplify orion_ge00_switch_init
  ARM: mvebu/orion: remove NO_IRQ check from device init
  ARM: mv78xx0: simplify ethernet device creation
2016-09-21 22:35:56 +02:00
Arnd Bergmann
b315dac3e8 i.MX legacy board file changes for 4.9:
It includes a patch series that moves registrations and initializations
 of all peripherals which are GPIO line consumers for all legacy boards
 from .init_machine to .init_late init level. This is needed to
 proactively prevent boot time issues on the legacy boards due to the
 deprioritized init level of the GPIO controller driver (set lower than
 IOMUX controller driver init level), which is shared among all i.MX
 SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX4iCuAAoJEFBXWFqHsHzOUKUH/1Cw90wcp4+JupTAWcOrPWBH
 5sEukURoA6IXKlEYsRrLqaTFLIg5dNqvJaJMyJI8g2G/95YluSmG1NaGCKLZ3Ipn
 lYVSNkeeW5rwfini3Kg35b9eb4FPR16ygOwl9sltUDLwYZCyHHk4oorMvyOxRALP
 dK6YBmEN6wUoxMaUFd622g80GsMPOEV3wY2NzQS+x+3rfVCQPQ7ZjQjqftvgw6yu
 J/tZ1/71qj//dZPjnytIB/dpd732a5fIRXbRicMC7JSU0wuHXFj5iddDzOXaIBoT
 u7YVg76xJ0ugRfMwMGk0r6Aoh0sxyglrb5e/OO4xdvfaIUVPrDhDtWImk0E09Wo=
 =Vylx
 -----END PGP SIGNATURE-----

Merge tag 'imx-legacy-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX legacy board file changes for 4.9" from Shawn Guo:

It includes a patch series that moves registrations and initializations
of all peripherals which are GPIO line consumers for all legacy boards
from .init_machine to .init_late init level. This is needed to
proactively prevent boot time issues on the legacy boards due to the
deprioritized init level of the GPIO controller driver (set lower than
IOMUX controller driver init level), which is shared among all i.MX
SoCs.

* tag 'imx-legacy-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx legacy: pca100: move peripheral initialization to .init_late
  ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
  ARM: imx legacy: pcm043: move peripheral initialization to .init_late
  ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
  ARM: imx legacy: vpr200: move peripheral initialization to .init_late
  ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
  ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
  ARM: imx legacy: qong: move peripheral initialization to .init_late
  ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: pcm037: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
  ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
  ARM: imx legacy: kzm: move peripheral initialization to .init_late
2016-09-21 22:34:46 +02:00
Vladimir Zapolskiy
23fe1fd01c ARM: imx legacy: pca100: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:07 +08:00
Vladimir Zapolskiy
f0ebbdc423 ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:07 +08:00
Vladimir Zapolskiy
bfe16c894e ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:06 +08:00
Vladimir Zapolskiy
782a8ee8b9 ARM: imx legacy: pcm043: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:06 +08:00
Vladimir Zapolskiy
c217147b93 ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:23 +08:00
Vladimir Zapolskiy
88b074626f ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:20 +08:00
Vladimir Zapolskiy
598b2505b1 ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:17 +08:00
Vladimir Zapolskiy
8f39bd1553 ARM: imx legacy: vpr200: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:14 +08:00
Vladimir Zapolskiy
1cecfa48d9 ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:11 +08:00
Vladimir Zapolskiy
a95a9322df ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:08 +08:00
Vladimir Zapolskiy
c5f9cfe60b ARM: imx legacy: qong: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:04 +08:00
Vladimir Zapolskiy
ce689b0de5 ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:00 +08:00
Vladimir Zapolskiy
347aa6c413 ARM: imx legacy: pcm037: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:57 +08:00
Vladimir Zapolskiy
7880dcb259 ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:54 +08:00
Vladimir Zapolskiy
894b7cbedf ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:51 +08:00
Vladimir Zapolskiy
4ed9bb2184 ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:47 +08:00
Vladimir Zapolskiy
4bc2e627c5 ARM: imx legacy: kzm: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

The change is tested on qemu kzm target.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:33:10 +08:00
Neil Armstrong
d6fbd37bc1 MAINTAINERS: update list of Oxnas maintainers
Add a new list address in the MAINTAINERS file for the Oxnas platform.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-20 00:16:56 +02:00
Arnd Bergmann
95ab29a1f1 UniPhier ARM SoC updates for v4.9
* Remove unneeded SMP code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxgMzAAoJED2LAQed4NsGZcYP/ii71ytpSH9JKa2gPamGBrXb
 tCcuURzgzDajGVMKiO2dRGMJiUlJQnZBsynUPzz37nh46838hVC73Dqklgs8Q4SG
 f2RHmU9BKmvTLpm23iVArbaT+UqYT5vsSa1oz1XRfeU4QnqSf3JS/zaCFj/mStrR
 VnHBFykXgi1CyIDgqcjCKSSV4z2ZUTUVB/vZlFIMJk/HagnD2GoreZN7eJxwY7hW
 B7UGpnkUYGtQv+jVJVd9VJOOL9va3kHiDLzTaflBkKne0GBN5NwxYPuxgBc8sJ4a
 SDIa7dBlNbILpa0kcZq71UjsMvssExHThZYKZzkmtEUb0p4zns+50Pt0Ejz7xxDI
 ud9bZ7nOurBUUzfLNX2CAKwvPKrs1pVPRF1+zTQfNh2wrXDjmoMMvZNwBsBZNB1v
 eHzDZODqtdqmncXPM6Ixf2vVFskb+mjIoMASiVnoG6R2MdoOPi9l25qtUhSLkiok
 NWkLWrsxM9vr2ghedDjHDG7mhIK0c0arJb51Z5Av1w3zFttY3037qvzORGmZ6/35
 qvJMJZ5QRLwP9Esbb81imGGemvmsOPf0oOzINfrALeAOggLjsUP2uHEpk/9a9Wxx
 hEpWjhd02I7/+vY0iNyHa1RV6htlJzMS/1atpY4qORGRxnppgB4li/INSG7yILkt
 nveINr4i8xXNCZXQ51ig
 =IZcN
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-soc-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/soc

Pull "UniPhier ARM SoC updates for v4.9" from Masahiro Yamada:

* Remove unneeded SMP code

* tag 'uniphier-soc-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: uniphier: remove SoC-specific SMP code
2016-09-20 00:03:37 +02:00
Arnd Bergmann
1c90e170fe i.MX SoC updates for 4.9:
- Set INT_MEM_CLK_LPM bit to get proper WAIT mode support on i.MX6SX.
    This is a workaround for i.MX6SX WAIT mode hardware issue.
  - Enable cpuidle support with 3 low-power states (WFI, WAIT, POWER-OFF)
    for i.MX6UL.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX1lGaAAoJEFBXWFqHsHzOEckH/RBAAm7WTxFJTvBC0qy7IR6r
 WN47hMMs4Nx5YxLqix7QJW4g5QP97pKgnX4CX7MOn+AC0SB/BBl5jjQqp32nniF4
 jZpi6PsHk41Zr2XX4tdS80FShs1pUFlH6COJSKGWr9fOxF4b144KPLzFSYHJOh7O
 1wA+awsVE/c3o6UPOLm10vo0ApdvYm6/uhXS0JpQtH9nKtL++Bon+o4ruq49pawg
 YtZ1OqRu+FFC5l1jijGdeRD+uLpiqJsfzUDXoJgvGcuTColGVil2M0qzcrIveoF5
 ByAbeoVRxV2wUObRrr4pJpOrD4zJ3lc7e4YU1NJY2pPeayDYEwvpgISa+aeZGXA=
 =QOfe
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX SoC updates for 4.9" from Shawn Guo:

 - Set INT_MEM_CLK_LPM bit to get proper WAIT mode support on i.MX6SX.
   This is a workaround for i.MX6SX WAIT mode hardware issue.
 - Enable cpuidle support with 3 low-power states (WFI, WAIT, POWER-OFF)
   for i.MX6UL.

* tag 'imx-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: build cpuidle-imx6sx.o for imx6ul
  ARM: imx: add cpuidle support for i.mx6ul
  ARM: imx: enable WAIT mode hardware workaround for imx6sx
  ARM: imx: rename imx6q_set_int_mem_clk_lpm() function
2016-09-19 16:48:45 +02:00
Arnd Bergmann
4a5c99462a Allwinner core changes for 4.9
Add support for big endian on the Allwinner A20, and the Nextthing GR8 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX1cfXAAoJEBx+YmzsjxAgQ9wQAIIxnsNUmgNF4JmS/IXNOXRC
 Qb++IMkIEFVb5vv0NyBLHqZKF74u5wsbg7raFyMzePoj3Hq4iYiYdm0LB9w8nq+m
 V3PfvArjMKsBbS4ZZDHvDmrffGirQaycG2NCkkoe38abMCJgBt4TlvO3/6rZHV8E
 qLrM2BkHRbQfC8QISBPgFJolE1LYoge6FOLbL9HV4blzhnQdNrSMoAjLutIs1RiL
 964sVovCUwX5iAELpTnwmOBhGA904ptg/NAZZltbQthOBSESZcnSA6OhlAwVkIbN
 efCEXaNSsixntpGNd5nczFJV9KE5nUQudgPHK+boMXhDQ3xjmDJI+zeBSa2EWgUk
 kpLXKLfBo/0EG+9j8or0I8CzoN59qFPVlIE5eaSPdSDFUHX3N5zllrNND59sGkLy
 amodTEyT/ZnZKJJLsTge8leMMV/jYr95cDOv5tCKJEL8D8PrOnqu12wJJzWMT8dN
 sxZrw4fhBWrE9cntL7xqaiB4sZmX21yybm3PT4Zooa1IG5JwE9F4bMCdXdIxbwC0
 O1MdTM1U3rmT76RAYdayb7SUus8o5ypnsAKntPeOKdEwld9zjGgOGnmqIvcdo407
 fW8O2D0CQ4cVckJ5MVh0fN/BZAtBVBnPkRo6dnQiaT3AzAOCTQyQUX1h+A0TUs0w
 EEAQ4v/8DzjyOkDCfR5G
 =uNAt
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Pull "Allwinner core changes for 4.9" from Maxime Ripard:

Add support for big endian on the Allwinner A20, and the Nextthing GR8 SoC

* tag 'sunxi-core-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Support the Nextthing GR8
  ARM: sunxi: enable big-endian
2016-09-15 00:42:02 +02:00
Arnd Bergmann
be46f95b54 This is the pxa changes for v4.9 cycle.
This cycle is covering :
  - the removal of the legacy DMA API
    This is the major contributor to the negative diffstat, as dmaengine
    have taken over in this area.
  - IDE subsystem defconfig fixes
  - preparation for pxa25x to be device-tree compliant
  - various irq related fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX0ucrAAoJEAP2et0duMsSdsUP/j+HOYv8tqnJ4/Wl0byLPj7o
 IrEWe3Ul+ZGisiN6u5umRANVHUbgNCrPmTMNVa/u3UA2yfffrV1pn6oiJVsNWIt2
 /f6Kbd+czy+r745DEx/zcHYqOp43KOPslzzYxJpRNVcuiEOQ2ljSdSZgmgwy9blv
 9/l7BIlAQn/XgXwOPj7C8j/mOkYmxXh2BdHz7pVhIAqofj0CrqXYhvgOPxvEOOqk
 jD8dWDlvFb0yTvP2RcxhUbUo6aOYf9OpBuNOctKqwKzxFpTloP/D/hQ5doBabalM
 GBzw4835+69qnMtrF/9JPKj9+cR/qHEhGLgHaKRAIKcaMMP0ksiDOYWpfjpq2BOj
 q/uSoIKPN5I5s2i78o97jDWWofF5iO3tioeLqavn8O91ptWb4EFCRdBvmX3PLvAb
 fy0dbF5qKJgowgYaO+Oe54ZKWWZ9wJ1GFxV4y+dXWy8def4KdNXu2AV7YqwS8JeA
 ifmxrQrqPj8j21X7bVYwvD4mplSPkmviO1c734BL1zAd3V8PdP27V5gNR5DYWAyP
 Bppv6HM9JGGHLjXTXaw+MIJJis1Pqe6Ou4XAt1K9vbj5cFNMt4NJx9B5eJRmqPkj
 Bt6FPLYPpUgwGIK4CZ6vJ+s4G9eAnV/OiPNrrmtm0stiRRMcPBWFFaPZSKj0+1wc
 2TbuaO393CcyoCyC5bKY
 =kAKB
 -----END PGP SIGNATURE-----

Merge tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux into next/soc

Pull "This is the pxa changes for v4.9 cycle" from Robert Jarzmik:

This cycle is covering :
 - the removal of the legacy DMA API
   This is the major contributor to the negative diffstat, as dmaengine
   have taken over in this area.
 - IDE subsystem defconfig fixes
 - preparation for pxa25x to be device-tree compliant
 - various irq related fixes

* tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux:
  ARM: pxa: pxa_cplds: fix interrupt handling
  ARM: pxa: remove irq init from dt machines
  ARM: pxa: Use kmalloc_array() in pxa_pm_init()
  ARM: pxa: magician: Remove duplicated I2C pins declaration
  ARM: pxa: fix GPIO double shifts
  arm: trizeps4_defconfig: disable IDE subsystem
  arm: pxa255-idp_defconfig: disable IDE subsystem
  arm: lpda270_defconfig: disable IDE subsystem
  arm: colibri_pxa270_defconfig: disable IDE subsystem
  ARM: pxa: add pxa25x device-tree support
  ARM: pxa: prepare pxa25x interrupts for device-tree platforms
  ARM: pxa: remove platform dma code
  ARM: pxa: remove devicetree boards from pxa_defconfig
2016-09-15 00:28:52 +02:00
Arnd Bergmann
f6b2dae76e Renesas ARM Based SoC Updates for v4.9
Clean-up:
 * Only use smp_init when SMP is selected
 
 Enablement:
 * Add debug-ll support for r8a7992
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz8Q6AAoJENfPZGlqN0++mNgQAKxv/KqBfxtX3rpZ6dqrjCK3
 zIP8VtsWD7R12kdHizmYZKXqpRK2K7UzRhebEinIXcu2jXgqZROFRizxrDoYGUXL
 nQJVPnc4PrMASowZuwzVBMYMD8mWUjCIVG6/YMmPXJMNj7+DXAFdWC267mAavRhJ
 jxvSr0NAmPQBd8AQR1tLCkuZQ6Ms1xzG/lb4Prjc1uPuJH5gNwPfdZNzueFbcvtG
 OvB+SH9c7RjRu9pIm7nnWryJh7pBAULTdRDjq/BscQLBOCoS2XhUDFnsvKOwUmxs
 DlKdDSXEjsrMvzrVKAehK6VNGCFwJkn2RvF+wyIz1dnggVipP8PBrkXXQBuI+ky/
 MFrhKBV/qFkLjoJaC36DSW6asjyHfKT2ZnECueVjhW5oLWEEXJVBLEtveSHL0JYv
 Z/FNoXGZ9zWkr/7xf8pzYYJ1YqxXmzTWvpNLim8poVOTWNfH2vsAaa8rwGhlCbR/
 g2J3+7jVCpwVHFd6yAOCmHad3LXAU2wWzTwKUVAJ2jwIyvgxyrKWUeLkow98sBw3
 apTQBmSLMRwQ/nui3nBaPxG1gcOt76N2kW4VsmW8JgHwHEb9c/xKIPTNhz+fYwIn
 AsySm9UswhPfg/fE3QK/xU9o6CIFDQ9mtFteUqcXqOKklt0qRIFpstgBIqo0yKxL
 MiXIw1Z63Nd6Rin3MeY7
 =7Opm
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Updates for v4.9" from Simon Horman:

Clean-up:
* Only use smp_init when SMP is selected

Enablement:
* Add debug-ll support for r8a7992

* tag 'renesas-soc-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7791: only use smp_init when SMP is selected
  ARM: shmobile: r8a7790: only use smp_init when SMP is selected
  ARM: debug-ll: Add support for r8a7992
2016-09-15 00:27:27 +02:00
Arnd Bergmann
ea58e97d66 This pull request contains Broadcom ARM-based SoC changes for 4.9, please pull
the following:
 
 - Rafal adds preliminary support for the new BCM53573 Wi-Fi SoC based on a
   single core Cortex A7 and re-using a bunch of iProc peripherals
 
 - Florian adds support for earlyprintk on Broadcom STB/CM ARM-based chips by
   reading the chip family_id value from a known location and deriving the UART
   based address
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz3EeAAoJEIfQlpxEBwcEhOMQAIR2/o8vsxo58mH2DD9Zx6b7
 DuIqw5w7zL85bKeSm8o9puhmF9MyVeNDeAaWgO5Ck1pKw2pycm2K4bOsfHCYlijS
 I+U85MnwZC9Gnr59UiGXFrhA4cpQ1Vd03s2FqMYhjGxD+05Xn/RK6aCPJGwcsnsE
 QAonT40RU/uR05a7XBLY/DT0jLxYrDib9xInkImtPmcjaQuuercsFfjL+Fx0/EhO
 JnY4Xw5KeJGZEwu4mpoLkupbzm7wCTP2vSoqXMMHEwPP79GLXVolqIAErIV9mcBr
 hSLbtng6LG5xfZ1Z70VtNRYfEOYl8jkik/F7R2VcR0JmJtATr//Yy7oN8JxmsCc5
 494VrsThlgO0F8r8l7VpNi9qz3Yb1N31OHS/v5ZswyWzqvjYB6oOE8L4Z4MKZjec
 kEuYQPbvjKNsGX960B3LYcE8qe8TPF3ih+5E/UoNAkO5yYj6Q5G4H9WJSx0gSQYw
 q7lXlsKE+W39Mw0Pztp+HExcaJAudDJ6gy617HEw1+ZDQEpQAGG4Lipge6/hAVbA
 kDvoIIle2RLLlydibf1qz1PQKFqDXscWNcvaRd2wYTX+xIE4i26JiWMYboPLXXz1
 VXkiPRB3agGGtzKuq2elOc1zOPPEosdud5JhQlW632qy6rkIoVy0bSMTivfO2rBO
 /z71QLuHPWjjTISNrBud
 =8KXa
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.9/soc' of http://github.com/Broadcom/stblinux into next/soc

Pull "Broadcom soc changes for 4.9" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoC changes for 4.9, please pull
the following:

- Rafal adds preliminary support for the new BCM53573 Wi-Fi SoC based on a
  single core Cortex A7 and re-using a bunch of iProc peripherals

- Florian adds support for earlyprintk on Broadcom STB/CM ARM-based chips by
  reading the chip family_id value from a known location and deriving the UART
  based address

* tag 'arm-soc/for-4.9/soc' of http://github.com/Broadcom/stblinux:
  ARM: BCM53573: Initial support for Broadcom BCM53573 SoCs
  ARM: brcmstb: Add earlyprintk support using run-time checks
2016-09-15 00:22:55 +02:00
Arnd Bergmann
2c8cebd262 Qualcomm ARM Based SoC Updates for v4.9
* Remove unnecessary QCOM board file
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXycbQAAoJEFKiBbHx2RXVQr8QAOxS0XApXi/j+jkciOCl1wrA
 PU3GKVjfyOebf26Yb6k3wP9RauQqBiXGDdpD0O7jjfS6avsmUOU6EdXTV0GmTTs4
 PiQyJGByyvV3MKVodEg7jVW99/D9ZBU6hUj+C+CgROqMw0oMAUmaSbPQmq877vKd
 g+IhKiTgZV9KojS4BhCwZmpgIDdzSeOaJqjqG6YHwGyiNsUCt7Qkvn4uakROR/BQ
 NkLHxYCXBX1c7goajeUU6ToTzHRy56Mvne99US7IzxvDqBPO1r/OEIPnKr/Yp88s
 SiBZPUIrPOdEDlYVZYvJU2kQYHDLEr2RVN56FGXUS8tYXfJvdDx0X4Ehj6U0x64X
 VmSR50a9G5QNQlL/tLFNK0umOkAQQavWmtAYLQ+Lc2IG5m4DCziNXEHVBcMe+HE8
 x2nBKF4suGmgy0zZa6XUtcy8BZTYlPQY2rfGc4rhZBSTr2fiDg/pghfg6I5eZdLB
 tUvvW32tDJrKEAOsSVHvT5bWY94uLZjeX0lO+sB1YLfihy3rZbxOCHXkH35mjamv
 MmEZlqU8cuPVTXtVmFdcGQzWq5yUvEcsSZ2IhSm8P0TUZWCCuf3huFqAy3kdU6aO
 6NkaqlSOoZUpXeYoiO06C5HlqzLxEdVEBiolGs+aR/KZ3ffJ1NwkjBTinhGefNgz
 iFRWDl+D0zO1uZA5JLkW
 =epvz
 -----END PGP SIGNATURE-----

Merge tag 'qcom-soc-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM Based SoC Updates for v4.9" from Andy Gross:

* Remove unnecessary QCOM board file

* tag 'qcom-soc-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: qcom: Cleanup/Remove unnecessary board file
2016-09-15 00:22:16 +02:00
Arnd Bergmann
77a1c68a96 ARM: orion5x: remove extraneous NO_IRQ
rd88f6183ap-ge passes NO_IRQ as the interrupt line for its m25p80
NOR flash. However, this device never uses an interrupt and the
driver doesn't care, so we can simply remove the deprecated constant
here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:36:20 +02:00
Arnd Bergmann
fe158a17c1 ARM: orion: simplify orion_ge00_switch_init
One of the last users of NO_IRQ on ARM is the switch initialization
code on orion5x, which sometimes passes a GPIO based IRQ number.

However, the driver doesn't actually use this number, and according
to Andrew Lunn never will do it for non-DT based machines, so
we can simply drop the irq argument.

Simplifying it further, we can also drop the static platform_device
and instead call platform_device_register_data(), which in turn
lets us mark the platform_data structures as __initdata and slightly
reduce the memory consumption.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:36:13 +02:00
Arnd Bergmann
93a753bdc1 ARM: mvebu/orion: remove NO_IRQ check from device init
For most devices, we know in advance whether they have an
interrupt line or not, so we can avoid passing NO_IRQ and
instead split fill_resources() into two interfaces, with
only the new fill_resources_irq() function taking an irq
argument, which it then can use unconditionally.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:35:50 +02:00
Arnd Bergmann
7d619d8ae0 ARM: mv78xx0: simplify ethernet device creation
Out of the four ethernet devices on mv78xx0, only the first one
has an error interrupt line, for the other ones we pass NO_IRQ
and then ignore the argument.

In order to get closer to complete remove of NO_IRQ, this simply
drops the unused function arguments.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:35:37 +02:00
Robert Jarzmik
9ba63e3cc8 ARM: pxa: pxa_cplds: fix interrupt handling
Since its initial commit, the driver is buggy for multiple interrupts
handling. The translation from the former lubbock.c file was not
complete, and might stall all interrupt handling when multiple
interrupts occur.

This is especially true when inside the interrupt handler and if a new
interrupt comes and is not handled, leaving the output line still held,
and not creating a transition as the GPIO block behind would expect to
trigger another cplds_irq_handler() call.

For the record, the hardware is working as follows.

The interrupt mechanism relies on :
 - one status register
 - one mask register

Let's suppose the input irq lines are called :
 - i_sa1111
 - i_lan91x
 - i_mmc_cd
Let's suppose the status register for each irq line is called :
 - status_sa1111
 - status_lan91x
 - status_mmc_cd
Let's suppose the interrupt mask for each irq line is called :
 - irqen_sa1111
 - irqen_lan91x
 - irqen_mmc_cd
Let's suppose the output irq line, connected to GPIO0 is called :
 - o_gpio0

The behavior is as follows :
 - o_gpio0 = not((status_sa1111 & irqen_sa1111) |
		 (status_lan91x & irqen_lan91x) |
		 (status_mmc_cd & irqen_mmc_cd))
   => this is a N-to-1 NOR gate and multiple AND gates
 - irqen_* is exactly as programmed by a write to the FPGA
 - status_* behavior is governed by a bi-stable D flip-flop
   => on next FPGA clock :
     - if i_xxx is high, status_xxx becomes 1
     - if i_xxx is low, status_xxx remains as it is
     - if software sets status_xxx to 0, the D flip-flop is reset
       => status_xxx becomes 0
       => on next FPGA clock cycle, if i_xxx is high, status_xxx becomes
	  1 again

Fixes: fc9e38c0f4 ("ARM: pxa: lubbock: use new pxa_cplds driver")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09 18:09:53 +02:00
Robert Jarzmik
32f17997c1 ARM: pxa: remove irq init from dt machines
The init_irq and handle_irq can be declared through standard irqchip
declaration and are not necessary in machine descriptions.

This is another step towards the generic kernel for the pxa
architecture.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-09-09 18:08:01 +02:00
Markus Elfring
8571110575 ARM: pxa: Use kmalloc_array() in pxa_pm_init()
* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data type by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09 18:08:00 +02:00
Petr Cvek
e572f6491a ARM: pxa: magician: Remove duplicated I2C pins declaration
Magician has GPIO117_I2C_SCL and GPIO118_I2C_SDA pins declared twice.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09 18:08:00 +02:00
Robert Jarzmik
ca26475bf0 ARM: pxa: fix GPIO double shifts
The commit 9bf448c66d ("ARM: pxa: use generic gpio operation instead of
gpio register") from Oct 17, 2011, leads to the following static checker
warning:
  arch/arm/mach-pxa/spitz_pm.c:172 spitz_charger_wakeup()
  warn: double left shift '!gpio_get_value(SPITZ_GPIO_KEY_INT)
        << (1 << ((SPITZ_GPIO_KEY_INT) & 31))'

As Dan reported, the value is shifted three times :
 - once by gpio_get_value(), which returns either 0 or BIT(gpio)
 - once by the shift operation '<<'
 - a last time by GPIO_bit(gpio) which is BIT(gpio)

Therefore the calculation lead to a chained or operator of :
 - (1 << gpio) << (1 << gpio) = (2^gpio)^gpio = 2 ^ (gpio * gpio)

It is be sheer luck the former statement works, only because each gpio
used is strictly smaller than 6, and therefore 2^(gpio^2) never
overflows a 32 bits value, and because it is used as a boolean value to
check a gpio activation.

As the xxx_charger_wakeup() functions are used as a true/false detection
mechanism, take that opportunity to change their prototypes from integer
return value to boolean one.

Fixes: 9bf448c66d ("ARM: pxa: use generic gpio operation instead of
gpio register")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09 18:07:59 +02:00
Arnd Bergmann
d64299daf4 ARM: imx: build cpuidle-imx6sx.o for imx6ul
The imx6ul soc code gained support for cpuidle, but that causes
a link failure if CONFIG_SOC_IMX6SX is disabled:

arch/arm/mach-imx/mach-imx6ul.o: In function `imx6ul_init_late':
mach-imx6ul.c:(.init.text+0xc): undefined reference to `imx6sx_cpuidle_init'

This adds the file containing the imx6sx_cpuidle_init function
to the kernel for 6ul-only configurations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 547e8f5269 ("ARM: imx: add cpuidle support for i.mx6ul")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-08 22:12:10 +08:00
Maxime Ripard
c1efda1238 ARM: sunxi: Support the Nextthing GR8
The GR8 is an SoC made by Nextthing Co, loosely based on the sun5i family.

It has a number of new controllers compared to the A10s and A13 (SPDIF, I2S),
but some controllers missing too (Ethernet, less I2C, less UARTs).

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-08 14:32:23 +02:00
Arnd Bergmann
a2fccdead1 Samsung mach/soc update for v4.9:
1. Fix for DMA on S3C24xx. This was probably broken for long time, nobody runs
    this code... till now.
 2. After fixes from Matthew Leach and Ben Dooks, most of our mach code
    and drivers is now endian-safe. Mark the platform as supporting big endian.
 3. Cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxUteAAoJEME3ZuaGi4PXikUP/A2O1mBQF1UUovCH6X+B1OJz
 yQyrjEZtsyE5icImrVR5ugE81giCqqAEvyuCAQT29It2TeSBaqwRZqMhKO7agt08
 LOpWSH8g0RivM6Y8sW2wQ+0xyrHNKiWSOXvLiLwb5Spga3+hU2FMyiKvwqs2LoZW
 w75wPr5ytz7pF/Q0g8QJ1Q8Kerl02isTRo911SbF4HhjRKgLwwXFdTGHzSTwA+jw
 Tjg/cw2/d8YML0VN/YhlMh2G3dPPN+5I8MSfqF0gB+5gt6HiUdBICzEG11ZySRHy
 FPN+lxLP7n6UcuIewInr+O2IEeyYeYHHrPYenyDtYA/VsyFDL/NWcqFLXG/8yeUk
 hXLzj7nabjTN2dduDY0FCW5rh8FMLxY1/hd6CAB7Is7G+aADJEulsZ9xu6A7NmZC
 UuqU1a7eKLONFagYLpO9AVcRL6QSZMWwibHLVL8N0lWT2JUHCE0dcvLFkXJL0ENx
 MJQGz0lqLJ2Fl9U+WjwATpsaSF3MRuo2g+sIU/eDapcxiFoA8r0KH9uGx1b1EzoT
 Qn7Ot123vX4ZhYWAjy+x/R1vhX+KIMKSLswq9Z4xvkb2hp6dZ6xT/kjzxGhXjlDA
 yVPAGhvyxKug7f8BGteYwnglPzTkbcF9TAqe5r+TPNgzr3xA+AyctHwJDHgFSDqB
 5s0SJRmvwHOIjM0Cm7sW
 =3F8b
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Merge "Samsung mach/soc update for v4.9" from Krzysztof Kozlowski:

1. Fix for DMA on S3C24xx. This was probably broken for long time, nobody runs
   this code... till now.
2. After fixes from Matthew Leach and Ben Dooks, most of our mach code
   and drivers is now endian-safe. Mark the platform as supporting big endian.
3. Cleanups.

* tag 'samsung-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Remove unused DMC and CMU offsets and their mappings
  ARM: s3c64xx: Delete unnecessary assignment for the field "owner"
  ARM: EXYNOS: Enable ARCH_SUPPORTS_BIG_ENDIAN explicitly
  ARM: S3C24XX: Add missing DMA device for Mini2440 board
  ARM: S3C24XX: Add dma_mask assignments for DMA devices
2016-09-02 18:23:23 +02:00
Arnd Bergmann
2fca843059 DA850 SoC support update for making it possible
to use TI AEMIF driver in drivers/memory on DA850.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXvXbgAAoJEGFBu2jqvgRNDGoP/RVSdyZ15fKzhhfj0obEFSKQ
 vEONVS5JmehuJUC8l3n1Z8uIvHdiVGuG8zkKMON5+wO2HxxJBVZo9MoCLKYsJR1e
 n3/QVQ/iQWeXCaX0JGdoo/kl/a+YsEJC2MmxjOgioGOdhFqz79C/5NmFvG2hKKh8
 7RZnM+ipu95r4KiGqOatBB/7Cr0E8MeOrPxc6XM/XOYVAmZ9eygHT+UUha/P2ZyB
 IXS7rkL6/gxw5Y4dG8ExG0SyBg0TqeTT4akCqgeCrq+ybt/Saa3E7rFpWSIXqcrC
 BJ1OMPsMoLbFr2/lRGIzh6iO+OboqD0yMKOjnz8Bb/Pr69rZ7uAvxfZ2e7do57cK
 3cQNRjjUQcZ2ZeLUSqbg+sLtV8FI0fILUqy8u1nOAD/JtBC7VuUZNB2hqAXPjMbY
 onQrPxWnT+KdwIGXh2vSlQapMCMJeyQMhQjZAvq7pVpTsew0Ctcp5AFFBEbDM0td
 YW+dmajt0j1B1TmDulDgeXeYdGg8g7BjsCROpLVsrXpxVBgSqpHfSnhTjqzllNzg
 kbVLAkH72r6lsrytbQ7/S5L2IutftQlc3sLE3EUkaLy7e2R2TfsJDyKMZxfBMhuK
 tFGAjGnE7vfJad80+a9Yj7GdhVKVH5z3haaZZZNqC7dKBFg1k8/ozyXXZwwPCCni
 PuTU0vddIcX42KXSKpMu
 =dkHX
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.9/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Merge "DaVinci soc support updates for v4.9" from Sekhar Nori:

DA850 SoC support update for making it possible
to use TI AEMIF driver in drivers/memory on DA850.

* tag 'davinci-for-v4.9/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850: Add ti-aemif lookup for clock matching
2016-09-02 18:21:23 +02:00
Anson Huang
547e8f5269 ARM: imx: add cpuidle support for i.mx6ul
This patch enables cpuidle driver for i.MX6UL, it
reuses i.MX6SX's cpuidle driver, 3 levels of cpuidle
supported:

1. ARM WFI;
2. SOC in WAIT mode;
3. SOC in WAIT mode + ARM power off.

As i.MX6UL has cortex-A7 CORE with an internal L2
cache, so flushing it before powering down ARM platform
is necessary, flush_cache_all() in last step of cpu_suspend
has very small overhead, just call it to avoid cache
type check for different platforms.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29 22:39:28 +08:00
Anson Huang
6ae44aa651 ARM: imx: enable WAIT mode hardware workaround for imx6sx
Need to enable INT_MEM_CLK_LPM bit in CCM_CGPR for WAIT mode,
without this bit set, if there is pending interrupt during
ARM platform entering WAIT mode without power gating, cache
data will be corrupted, this is a hardware workaround for WAIT
mode and must be enabled.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29 22:39:27 +08:00
Anson Huang
8765caa5cb ARM: imx: rename imx6q_set_int_mem_clk_lpm() function
Let's rename the function imx6q_set_int_mem_clk_lpm()
to imx6_set_int_mem_clk_lpm() since it's actually
common for all i.MX6 SoCs.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29 22:39:27 +08:00
Linus Torvalds
3eab887a55 Linux 4.8-rc4 v4.8-rc4 2016-08-28 15:04:33 -07:00
Linus Torvalds
25d0d91af7 Merge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
  ones.  Nothing too strange at this point"

* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
  drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
  drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
  drm/amdgpu: skip TV/CV in display parsing
  drm/amdgpu: avoid a possible array overflow
  drm/amdgpu: fix lru size grouping v2
  drm/tegra: dsi: Enhance runtime power management
  drm/i915: Fix botched merge that downgrades CSR versions.
  drm/i915/skl: Ensure pipes with changed wms get added to the state
  drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
  drm/i915/skl: Add support for the SAGV, fix underrun hangs
  drm/i915/gen6+: Interpret mailbox error flags
  drm/i915: Reattach comment, complete type specification
  drm/i915: Unconditionally flush any chipset buffers before execbuf
  drm/i915/gen9: Drop invalid WARN() during data rate calculation
  drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
  drm: Reject page_flip for !DRIVER_MODESET
  drm/amdgpu: fix timeout value check in amd_sched_job_recovery
  drm/amdgpu: fix sdma_v2_4_ring_test_ib
  drm/amdgpu: fix amdgpu_move_blit on 32bit systems
  drm/radeon: fix radeon_move_blit on 32bit systems
  ...
2016-08-28 14:31:36 -07:00
Mario Kleiner
add1fa7510 drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-29 06:55:47 +10:00
Linus Torvalds
908e373f1c Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
 "A few fixes from the perf departement

   - prevent a imbalanced preemption disable in the events teardown code
   - prevent out of bound acces in perf userspace
   - make perf tools compile with UCLIBC again
   - a fix for the userspace unwinder utility"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Use this_cpu_ptr() when stopping AUX events
  perf evsel: Do not access outside hw cache name arrays
  tools lib: Reinstate strlcpy() header guard with __UCLIBC__
  perf unwind: Use addr_location::addr instead of ip for entries
2016-08-28 10:02:23 -07:00
Linus Torvalds
5d84ee7964 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
 "A single bugfix to prevent irq remapping when the ioapic is disabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Do not init irq remapping if ioapic is disabled
2016-08-28 10:00:21 -07:00
Masahiro Yamada
dd34b11566 ARM: uniphier: remove SoC-specific SMP code
The UniPhier architecture (32bit) switched over to PSCI.  Remove
the SoC-specific SMP operations.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-29 01:57:14 +09:00
Linus Torvalds
4340393e5a Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "This lot provides:

   - plug a hotplug race in the new affinity infrastructure
   - a fix for the trigger type of chained interrupts
   - plug a potential memory leak in the core code
   - a few fixes for ARM and MIPS GICs"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Implement activate op for device domain
  irqchip/mips-gic: Cleanup chip and handler setup
  genirq/affinity: Use get/put_online_cpus around cpumask operations
  genirq: Fix potential memleak when failing to get irq pm
  irqchip/gicv3-its: Disable the ITS before initializing it
  irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
  irqchip/gic: Allow self-SGIs for SMP on UP configurations
  genirq: Correctly configure the trigger on chained interrupts
2016-08-28 09:52:40 -07:00