[ Upstream commit c0aa7cf49d ]
Previously, the code would set a bit field which didn't exist
on DCE6 so it would be effectively a no-op.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f39f56520 ]
pm_runtime_get_sync() and pm_runtime_put_autosuspend() were previously
called in cmdq_mbox_send_data(), which is under a spinlock in msg_submit()
(mailbox.c). This caused lockdep warnings such as "sleeping function
called from invalid context" when running with lockdebug enabled.
The BUG report:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1164
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3616, name: kworker/u17:3
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
CPU: 1 PID: 3616 Comm: kworker/u17:3 Not tainted 6.1.87-lockdep-14133-g26e933aca785 #1
Hardware name: Google Ciri sku0/unprovisioned board (DT)
Workqueue: imgsys_runner imgsys_runner_func
Call trace:
dump_backtrace+0x100/0x120
show_stack+0x20/0x2c
dump_stack_lvl+0x84/0xb4
dump_stack+0x18/0x48
__might_resched+0x354/0x4c0
__might_sleep+0x98/0xe4
__pm_runtime_resume+0x70/0x124
cmdq_mbox_send_data+0xe4/0xb1c
msg_submit+0x194/0x2dc
mbox_send_message+0x190/0x330
imgsys_cmdq_sendtask+0x1618/0x2224
imgsys_runner_func+0xac/0x11c
process_one_work+0x638/0xf84
worker_thread+0x808/0xcd0
kthread+0x24c/0x324
ret_from_fork+0x10/0x20
Additionally, pm_runtime_put_autosuspend() should be invoked from the
GCE IRQ handler to ensure the hardware has actually completed its work.
To resolve these issues, remove the pm_runtime calls from
cmdq_mbox_send_data() and delegate power management responsibilities
to the client driver.
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22239eb258 ]
When configuring IPsec packet offload in tunnel mode, the driver tries
to create tunnel reformat objects unconditionally. This is incorrect,
because tunnel mode is only permitted under specific encapsulation
settings, and that decision is already made when the flow table is
created.
The offending commit attempted to block this case in the state add
path, but the check there happens too late and does not prevent the
reformat from being configured.
Fix by taking short reservations for both the eswitch mode and the
encap at the start of state setup. This preserves the block ordering
(mode --> encap) used later: the mode is blocked during RX/TX get, and
the encap is blocked during flow-table creation. This lets us fail
early if either reservation cannot be obtained, it means a mode
transition is underway or a conflicting configuration already owns
encap. If both succeed, the flow-table path later takes the ownership
and the reservations are released on exit.
Fixes: 146c196b60 ("net/mlx5e: Create IPsec table with tunnel support only when encap is disabled")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759652999-858513-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7593439c13 ]
When creating IPsec flow tables with tunnel mode enabled, the driver
uses mlx5_eswitch_block_encap() to prevent tunnel encapsulation
conflicts across different domains (NIC_RX/NIC_TX and FDB), since the
firmware doesn’t allow both at the same time.
Currently, the driver attempts to reserve tunnel mode unconditionally
for both NIC and FDB IPsec tables. This can lead to conflicting tunnel
mode setups, for example, if a flow table was created in the FDB
domain with tunnel offload enabled, and we later try to create another
one in the NIC, or vice versa.
To resolve this, adjust the blocking logic so that tunnel mode is only
reserved by NIC flows. This ensures that tunnel offload is exclusively
used in either the NIC or the FDB, and avoids unintended offload
conflicts.
Fixes: 1762f132d5 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Fixes: c6c2bf5db4 ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759652999-858513-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9d1b0b542 ]
The sparx5 driver programs UC/MC/BC flooding in sparx5_update_fwd() by
unconditionally applying bridge_fwd_mask to all flood PGIDs. Any bridge
topology change that triggers sparx5_update_fwd() (for example enslaving
another port) therefore reinstalls flooding in hardware for already
bridged ports, regardless of their per-port flood flags.
This results in clobbering of the flood masks, and desynchronization
between software and hardware: the bridge still reports “flood off” for
the port, but hardware has flooding enabled due to unconditional PGID
reprogramming.
Steps to reproduce:
$ ip link add br0 type bridge
$ ip link set br0 up
$ ip link set eth0 master br0
$ ip link set eth0 up
$ bridge link set dev eth0 flood off
$ ip link set eth1 master br0
$ ip link set eth1 up
At this point, flooding is silently re-enabled for eth0. Software still
shows “flood off” for eth0, but hardware has flooding enabled.
To fix this, flooding is now set explicitly during bridge join/leave,
through sparx5_port_attr_bridge_flags():
On bridge join, UC/MC/BC flooding is enabled by default.
On bridge leave, UC/MC/BC flooding is disabled.
sparx5_update_fwd() no longer touches the flood PGIDs, clobbering
the flood masks, and desynchronizing software and hardware.
Initialization of the flooding PGIDs have been moved to
sparx5_start(). This is required as flooding PGIDs defaults to
0x3fffffff in hardware and the initialization was previously handled
in sparx5_update_fwd(), which was removed.
With this change, user-configured flooding flags persist across bridge
updates and are no longer overridden by sparx5_update_fwd().
Fixes: d6fce51419 ("net: sparx5: add switching support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251003-fix-flood-fwd-v1-1-48eb478b2904@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dc8b26a3a ]
When accessing an MDIO register using single-byte smbus accesses, we have to
perform 2 consecutive operations targeting the same address,
first accessing the MSB then the LSB of the 16 bit register:
read_1_byte(addr); <- returns MSB of register at address 'addr'
read_1_byte(addr); <- returns LSB
Some PHY devices present in SFP such as the Broadcom 5461 don't like
seeing foreign i2c transactions in-between these 2 smbus accesses, and
will return the MSB a second time when trying to read the LSB :
read_1_byte(addr); <- returns MSB
i2c_transaction_for_other_device_on_the_bus();
read_1_byte(addr); <- returns MSB again
Given the already fragile nature of accessing PHYs/SFPs with single-byte
smbus accesses, it's safe to say that this Broadcom PHY may not be the
only one acting like this.
Let's therefore hold the i2c bus lock while performing our smbus
transactions to avoid interleaved accesses.
Fixes: d4bd3aca33 ("net: mdio: mdio-i2c: Add support for single-byte SMBus operations")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251003070311.861135-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23f3770e1a ]
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first.
Fixes: b4ab314149 ("bpf: Add redirect_neigh helper as redirect drop-in")
Reported-by: Yusuke Suzuki <yusuke.suzuki@isovalent.com>
Reported-by: Julian Wiedmann <jwi@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jordan Rife <jrife@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jordan Rife <jrife@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251003073418.291171-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb160e791a ]
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aead8197f ]
The cleanup loop was starting at the wrong array index, causing
out-of-bounds access.
Start the loop at the correct index for zero-indexed arrays to prevent
accessing memory beyond the allocated array bounds.
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 019e3f4550 ]
The ipi_mbox->dev.parent check is unreliable proxy for registration
status as it fails to protect against probe failures that occur after
the parent is assigned but before device_register() completes.
device_is_registered() is the canonical and robust method to verify the
registration status.
Remove ipi_mbox->dev.parent check in zynqmp_ipi_free_mboxes().
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 341867f730 ]
The controller is registered using the device-managed function
'devm_mbox_controller_register()'. As documented in mailbox.c, this
ensures the devres framework automatically calls
mbox_controller_unregister() when device_unregister() is invoked, making
the explicit call unnecessary.
Remove redundant mbox_controller_unregister() call as
device_unregister() handles controller cleanup.
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b601f900 ]
Since commit 22f72088ff ("tools headers: Update the syscall table with
the kernel sources") the arm64 syscall header is generated at build
time. Later, commit bfb713ea53 ("perf tools: Fix arm64 build by
generating unistd_64.h") added a dependency to libperf to guarantee that
this header was created before building libperf or perf itself.
However, libjvmti also requires this header but does not depend on
libperf, leading to build failures such as:
In file included from /usr/include/sys/syscall.h:24,
from /usr/include/syscall.h:1,
from jvmti/jvmti_agent.c:36:
tools/arch/arm64/include/uapi/asm/unistd.h:2:10: fatal error: asm/unistd_64.h: No such file or directory
2 | #include <asm/unistd_64.h>
Fix this by ensuring that libperf is built before libjvmti, so that
unistd_64.h is always available.
Fixes: 22f72088ff ("tools headers: Update the syscall table with the kernel sources")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Minet <v.minet@criteo.com>
Link: https://lore.kernel.org/r/20250922053702.2688374-1-v.minet@criteo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21b29e74ff ]
Some applications (like selftests/net/tcp_mmap.c) call SO_RCVLOWAT
on their listener, before accept().
This has an unfortunate effect on wscale selection in
tcp_select_initial_window() during 3WHS.
For instance, tcp_mmap was negotiating wscale 4, regardless
of tcp_rmem[2] and sysctl_rmem_max.
Do not change tp->window_clamp if it is zero
or bigger than our computed value.
Zero value is special, it allows tcp_select_initial_window()
to enable autotuning.
Note that SO_RCVLOWAT use on listener is probably not wise,
because tp->scaling_ratio has a default value, possibly wrong.
Fixes: d1361840f8 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251003184119.2526655-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6a43bc3e8 ]
When passing a list to subprocess.Popen, each element maps to one argv
token. Current code bundles multiple Clang flags into a single element,
something like:
cmd = ['clang',
'--target=x86_64-linux-gnu -fintegrated-as -Wno-cast-function-type-mismatch',
'test-hello.c']
So Clang only sees one long, invalid option instead of separate flags,
as a result, the script cannot capture any log via PIPE.
Fix this by using shlex.split() to separate the string so each option
becomes its own argv element. The fixed list will be:
cmd = ['clang',
'--target=x86_64-linux-gnu',
'-fintegrated-as',
'-Wno-cast-function-type-mismatch',
'test-hello.c']
Fixes: 09e6f9f983 ("perf python: Fix splitting CC into compiler and options")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-2-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d067feb8 ]
The feature test programs are built without enabling '-Wall -Werror'
options. As a result, a feature may appear to be available, but later
building in perf can fail with stricter checks.
Make the feature test program use the same warning options as perf.
Fixes: 1925459b4d ("tools build: Fix feature Makefile issues with 'O='")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-1-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2db687f346 ]
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store)
Fixes: 0f0023c649 ("ice: do not init struct ice_adapter more times than needed")
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251001115336.1707-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fc25c5a5a ]
Fix functions that return undefined values. These issues were caught by
running clang using LLVM=1 option.
Clang warnings are as follows:
ovpn-cli.c:1587:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
1587 | if (!sock) {
| ^~~~~
ovpn-cli.c:1635:9: note: uninitialized use occurs here
1635 | return ret;
| ^~~
ovpn-cli.c:1587:2: note: remove the 'if' if its condition is always false
1587 | if (!sock) {
| ^~~~~~~~~~~~
1588 | fprintf(stderr, "cannot allocate netlink socket\n");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1589 | goto err_free;
| ~~~~~~~~~~~~~~
1590 | }
| ~
ovpn-cli.c:1584:15: note: initialize the variable 'ret' to silence this warning
1584 | int mcid, ret;
| ^
| = 0
ovpn-cli.c:2107:7: warning: variable 'ret' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized]
2107 | case CMD_INVALID:
| ^~~~~~~~~~~
ovpn-cli.c:2111:9: note: uninitialized use occurs here
2111 | return ret;
| ^~~
ovpn-cli.c:1939:12: note: initialize the variable 'ret' to silence this warning
1939 | int n, ret;
| ^
|
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Link: https://patch.msgid.link/20251001123107.96244-2-sidharthseela@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9ea78707 ]
The origin code calls cancel_delayed_work() in ocelot_stats_deinit()
to cancel the cyclic delayed work item ocelot->stats_work. However,
cancel_delayed_work() may fail to cancel the work item if it is already
executing. While destroy_workqueue() does wait for all pending work items
in the work queue to complete before destroying the work queue, it cannot
prevent the delayed work item from being rescheduled within the
ocelot_check_stats_work() function. This limitation exists because the
delayed work item is only enqueued into the work queue after its timer
expires. Before the timer expiration, destroy_workqueue() has no visibility
of this pending work item. Once the work queue appears empty,
destroy_workqueue() proceeds with destruction. When the timer eventually
expires, the delayed work item gets queued again, leading to the following
warning:
workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats
WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0
...
RSP: 0018:ffff88806d108b10 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
<IRQ>
? kasan_report+0xc6/0xf0
? __pfx_delayed_work_timer_fn+0x10/0x10
? __pfx_delayed_work_timer_fn+0x10/0x10
call_timer_fn+0x25/0x1c0
__run_timer_base.part.0+0x3be/0x8c0
? __pfx_delayed_work_timer_fn+0x10/0x10
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x1c0/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
The following diagram reveals the cause of the above warning:
CPU 0 (remove) | CPU 1 (delayed work callback)
mscc_ocelot_remove() |
ocelot_deinit() | ocelot_check_stats_work()
ocelot_stats_deinit() |
cancel_delayed_work()| ...
| queue_delayed_work()
destroy_workqueue() | (wait a time)
| __queue_work() //UAF
The above scenario actually constitutes a UAF vulnerability.
The ocelot_stats_deinit() is only invoked when initialization
failure or resource destruction, so we must ensure that any
delayed work items cannot be rescheduled.
Replace cancel_delayed_work() with disable_delayed_work_sync()
to guarantee proper cancellation of the delayed work item and
ensure completion of any currently executing work before the
workqueue is deallocated.
A deadlock concern was considered: ocelot_stats_deinit() is called
in a process context and is not holding any locks that the delayed
work item might also need. Therefore, the use of the _sync() variant
is safe here.
This bug was identified through static analysis. To reproduce the
issue and validate the fix, I simulated ocelot-switch device by
writing a kernel module and prepared the necessary resources for
the virtual ocelot-switch device's probe process. Then, removing
the virtual device will trigger the mscc_ocelot_remove() function,
which in turn destroys the workqueue.
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251001011149.55073-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3119686e ]
If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0
and sctp_ulpevent_make_authkey() returns 0, then the variable
ai_ev remains zero and the zero will be dereferenced
in the sctp_ulpevent_free() function.
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Fixes: 30f6ebf65b ("sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT")
Link: https://patch.msgid.link/20251002091448.11-1-alsp705@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe1323ab3 ]
Nodes stored in the validation duplicates hashtable come from an arena
allocator that is cleared at the end of vmw_execbuf_process. All nodes
are expected to be cleared in vmw_validation_drop_ht but this node escaped
because its resource was destroyed prematurely.
Fixes: 64ad2abfe9 ("drm/vmwgfx: Adapt validation code for reference-free lookups")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250926195427.1405237-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ac2c02790 ]
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: c0951b797e ("drm/vmwgfx: Refactor resource management")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://lore.kernel.org/r/20250917153655.1968583-1-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9daa5a8795 ]
Starting with 'commit 2297791c92 ("s390/cio: dont unregister
subchannel from child-drivers")', cio no longer unregisters
subchannels when the attached device is invalid or unavailable.
As an unintended side-effect, the cio_ignore purge function no longer
removes subchannels for devices on the cio_ignore list if no CCW device
is attached. This situation occurs when a CCW device is non-operational
or unavailable
To ensure the same outcome of the purge function as when the
current cio_ignore list had been active during boot, update the purge
function to remove I/O subchannels without working CCW devices if the
associated device number is found on the cio_ignore list.
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1af59cd5cc ]
In S3 and above sleep states, the device can loose power regardless of
d3cold.allowed flag. Bring up I2C controller explicitly in system PM
path to ensure its normal operation after losing power.
v2: Cover S3 and above states (Rodrigo)
Fixes: 0ea07b6951 ("drm/xe/pm: Wire up suspend/resume for I2C controller")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250918103200.2952576-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit e4863f1159)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08fdfd260e ]
In xe_hw_engine_group_get_mode(), a write lock is acquired before
calling switch_mode(), which in turn invokes
xe_hw_engine_group_suspend_faulting_lr_jobs().
On failure inside xe_hw_engine_group_suspend_faulting_lr_jobs(),
the write lock is released there, and then again in
xe_hw_engine_group_get_mode(), leading to a double release.
Fix this by keeping both acquire and release operation in
xe_hw_engine_group_get_mode().
Fixes: 770bd1d341 ("drm/xe/hw_engine_group: Ensure safe transition between execution modes")
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250925023145.1203004-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 662d98b8b3)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f0d91ba72 ]
Print "entry->mac" before freeing "entry". The "entry" pointer is
freed with kfree_rcu() so it's unlikely that we would trigger this
in real life, but it's safer to re-order it.
Fixes: cc5387f734 ("net/mlx4_en: Add unicast MAC filtering")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/aNvMHX4g8RksFFvV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49bdb63ff6 ]
Syzbot reported read of uninitialized variable BUG with following call stack.
lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout
=====================================================
BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707
Local variable sig.i.i created at:
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM
read timeout errors (-ETIMEDOUT). In the fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error.
As a result, callers could mistakenly treat the data buffer as valid
even though the EEPROM read had actually timed out with no data or partial
data.
To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM timeout error correctly
to the caller.
Reported-by: syzbot+62ec8226f01cb4ca19d9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=62ec8226f01cb4ca19d9
Fixes: 8b1b2ca83b ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250930084902.19062-1-bhanuseshukumar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaab61de1f ]
It is allowed to mix Link and Host DMA channels in a way that their index
is different. In this case we would read the LLP from a channel which is
not used or used for other operation.
Such case can be reproduced on cAVS2.5 or ACE1 platforms with soundwire
configuration:
playback to SDW would take Host channel 0 (stream_tag 1) and no Link DMA
used
Second playback to HDMI (HDA) would use Host channel 1 (stream_tag 2) and
Link channel 0 (stream_tag 1).
In this case reading the LLP from channel 2 is incorrect as that is not the
Link channel used for the HDMI playback.
To correct this, we should look up the BE and get the channel used on the
Link side.
Fixes: 67b182bea0 ("ASoC: SOF: Intel: hda: Implement get_stream_position (Linear Link Position)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98662be7ef ]
Init acpi_gbl_use_global_lock to false, in order to void error messages
during boot phase:
ACPI Error: Could not enable GlobalLock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19baac378a ]
Commit b15212824a ("LoongArch: Make LTO case independent in Makefile")
moves "KBUILD_LDFLAGS += -mllvm --loongarch-annotate-tablejump" out of
CONFIG_CC_HAS_ANNOTATE_TABLEJUMP, which breaks the build for LLVM-18, as
'--loongarch-annotate-tablejump' is unimplemented there:
ld.lld: error: -mllvm: ld.lld: Unknown command line argument '--loongarch-annotate-tablejump'.
Call ld-option to detect '--loongarch-annotate-tablejump' before use, so
as to fix the build error.
Fixes: b15212824a ("LoongArch: Make LTO case independent in Makefile")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abb2a55722 ]
Currently, when compiling with GCC, there is no "break 7" instruction
for zero division due to using the option -mno-check-zero-division, but
the compiler still generates "break 0" instruction for zero division.
Here is a simple example:
$ cat test.c
int div(int a)
{
return a / 0;
}
$ gcc -O2 -S test.c -o test.s
GCC generates "break 0" on LoongArch and "ud2" on x86, objtool decodes
"ud2" as INSN_BUG for x86, so decode "break 0" as INSN_BUG can fix the
objtool warnings for LoongArch, but this is not the intention.
When decoding "break 0" as INSN_TRAP in the previous commit, the aim is
to handle "break 0" as a trap. The generated "break 0" for zero division
by GCC is not proper, it should generate a break instruction with proper
bug type, so add the GCC option -fno-isolate-erroneous-paths-dereference
to avoid generating the unexpected "break 0" instruction for now.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202509200413.7uihAxJ5-lkp@intel.com/
Fixes: baad7830ee ("objtool/LoongArch: Mark types based on break immediate code")
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45ad27d9a6 ]
Instead of constraining the ALSA buffer time to be double of the firmware
host buffer size, it is better to set it for the period time.
This will implicitly constrain the buffer time to a safe value
(num_periods is at least 2) and prohibits applications to set smaller
period size than what will be covered by the initial DMA burst.
Fixes: fe76d2e75a ("ASoC: SOF: Intel: hda-pcm: Use dsp_max_burst_size_in_ms to place constraint")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dcf683bf1 ]
For ChainDMA the firmware allocates 5ms host buffer instead of the standard
4ms which should be taken into account when setting the constraint on the
buffer size.
Fixes: 842bb8b62c ("ASoC: SOF: ipc4-topology: Save the DMA maximum burst size for PCMs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7fe5ff832 ]
The firmware has changed the minimum host buffer size from 2 periods to
4 periods (1 period is 1ms) which was missed by the kernel side.
Adjust the SOF_IPC4_MIN_DMA_BUFFER_SIZE to 4 ms to align with firmware.
Link: f0a14a3f41
Fixes: 594c1bb9ff ("ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91917c0c6 ]
Don't open evsels on all CPUs, open them just on the CPUs they
support. This avoids opening say an e-core event on a p-core and
getting a failure - achieve this by getting rid of the "all_cpu_map".
In install_pe functions don't use the cpu_map_idx as a CPU number,
translate the cpu_map_idx, which is a dense index into the cpu_map
skipping holes at the beginning, to a proper CPU number.
Before:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
566,270,672 cpu_core/cycles/
<not supported> cpu_atom/instructions/
572,792,836 cpu_core/instructions/ # 1.01 insn per cycle
1.001595384 seconds time elapsed
```
After:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
443,299,201 cpu_atom/cycles/
1,233,919,737 cpu_core/cycles/
213,634,112 cpu_atom/instructions/ # 0.48 insn per cycle
2,758,965,527 cpu_core/instructions/ # 2.24 insn per cycle
1.001699485 seconds time elapsed
```
Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: bpf@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ebac01a00 ]
Check for NEED_RESCHED_LAZY, not just NEED_RESCHED, prior to transferring
control to a guest. Failure to check for lazy resched can unnecessarily
delay rescheduling until the next tick when using a lazy preemption model.
Note, ideally both the checking and processing of TIF bits would be handled
in common code, to avoid having to keep three separate paths synchronized,
but defer such cleanups to the future to keep the fix as standalone as
possible.
Cc: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Cc: Mukesh R <mrathor@linux.microsoft.com>
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7663dec6 ]
Call sysfs_update_group() after reading the device descriptor to ensure
the HID sysfs attributes are visible when the feature is supported.
Fixes: ae7795a8c2 ("scsi: ufs: core: Add HID support")
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a0f56d72a ]
Building perf with LIBBPF_DYNAMIC (ie not the default static linking of
libbpf with perf) is breaking as the libbpf isn't version 1.7 or newer,
where dont_enable is added to bpf_perf_event_opts.
To avoid this breakage add a compile time version check and don't
declare the variable when not present.
Fixes: 5e2ac8e857 ("perf bpf-filter: Enable events manually")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60cd16a3b7 ]
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis.
Fixes: 20b09c2992 ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b1bb980fd ]
The original commit set all cores in a cluster to a shared policy, but
did not update set_target to apply a frequency change to all cores for
the policy. This caused most cores to remain stuck at their boot
frequency.
Fixes: be4ae8c194 ("cpufreq: tegra186: Share policy per cluster")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 632d31067b ]
Device links with DL_FLAG_SYNC_STATE_ONLY should not affect system
suspend and resume, and functions like device_reorder_to_tail() and
device_link_add() don't try to reorder the consumers with that flag.
However, dpm_wait_for_consumers() and dpm_wait_for_suppliers() don't
check thas flag before triggering dpm_wait(), leading to potential hang
during suspend/resume.
This can be reproduced on MT8186 Corsola Chromebook with devicetree like:
usb-a-connector {
compatible = "usb-a-connector";
port {
usb_a_con: endpoint {
remote-endpoint = <&usb_hs>;
};
};
};
usb_host {
compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
port {
usb_hs: endpoint {
remote-endpoint = <&usb_a_con>;
};
};
};
In this case, the two nodes form a cycle and a SYNC_STATE_ONLY devlink
between usb_host (supplier) and usb-a-connector (consumer) is created.
Address this by exporting device_link_flag_is_sync_state_only() and
making dpm_wait_for_consumers() and dpm_wait_for_suppliers() use it
when deciding if dpm_wait() should be called.
Fixes: 05ef983e0d ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://patch.msgid.link/20250926102320.4053167-1-treapking@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce3f56999 ]
Add separate macros for walking links to suppliers and consumers of a
device to help device links users to avoid exposing the internals of
struct dev_links_info in their code and possible coding mistakes related
to that.
Accordingly, use the new macros to replace open-coded device links list
walks in the core power management code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki
Stable-dep-of: 632d31067b ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdd9ae23bb ]
Since SRCU is used for the protection of device link lists, the loops
over device link lists in multiple places in drivers/base/power/main.c
and in pm_runtime_get_suppliers() should be annotated as _srcu rather
than as _rcu which is the case currently.
Change the annotations accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki
Stable-dep-of: 632d31067b ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd2f74f8f3 ]
When using bpf_program__attach_kprobe_multi_opts on ARM64 to hook a BPF program
that contains the bpf_get_stackid function, the BPF program fails
to obtain the stack trace and returns -EFAULT.
This is because ftrace_partial_regs omits the configuration of the pstate register,
leaving pstate at the default value of 0. When get_perf_callchain executes,
it uses user_mode(regs) to determine whether it is in kernel mode.
This leads to a misjudgment that the code is in user mode,
so perf_callchain_kernel is not executed and the function returns directly.
As a result, trace->nr becomes 0, and finally -EFAULT is returned.
Therefore, the assignment of the pstate register is added here.
Fixes: b9b55c8912 ("tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs")
Closes: https://lore.kernel.org/bpf/20250919071902.554223-1-yangfeng59949@163.com/
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40b1ba37a ]
When updating the local timestamps from CB_GETATTR, the updated values
are not being properly vetted.
Compare the update times vs. the saved times in the delegation rather
than the current times in the inode. Also, ensure that the ctime is
properly vetted vs. its original value.
Fixes: 6ae30d6eb2 ("nfsd: add support for delegated timestamps")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3952f1cbcb ]
SETATTRs containing delegated timestamp updates are currently not being
vetted properly. Since we no longer need to compare the timestamps vs.
the current timestamps, move the vetting of delegated timestamps wholly
into nfsd.
Rename the set_cb_time() helper to nfsd4_vet_deleg_time(), and make it
non-static. Add a new vet_deleg_attrs() helper that is called from
nfsd4_setattr that uses nfsd4_vet_deleg_time() to properly validate the
all the timestamps. If the validation indicates that the update should
be skipped, unset the appropriate flags in ia_valid.
Fixes: 7e13f4f8d2 ("nfsd: handle delegated timestamps in SETATTR")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
