Commit graph

254,703 commits

Author SHA1 Message Date
Daniel Hellstrom
5149bed891 sparc32,leon: added some SMP comments
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 13:03:28 -07:00
Feng, Boqun
8547920fc6 drm/i915: clean up unused ring_get_irq/ring_put_irq functions
This patch depends on patch "drm/i915: fix user irq miss in BSD ring on
g4x".
Once the previous patch apply, ring_get_irq/ring_put_irq become unused.
So simply remove them.

Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-05-16 12:54:16 -07:00
Feng, Boqun
5bfa1063a7 drm/i915: fix user irq miss in BSD ring on g4x
On g4x, user interrupt in BSD ring is missed.
This is because though g4x and ironlake share the same bsd_ring,
their interrupt control interfaces have _two_ differences.

1.different irq enable/disable functions:
On g4x are i915_enable_irq and i915_disable_irq.
On ironlake are ironlake_enable_irq and ironlake_disable_irq.
2.different irq flag:
On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT.
On ironlake is GT_BSD_USER_INTERRUPT

Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq.
ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq.
So comes the irq miss on g4x.

To fix this, as other rings' code do, conditionally call different
functions(i915_enable/disable_irq and ironlake_enable/disable_irq)
and use different interrupt flags in bsd_ring_get/put_irq.

Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-05-16 12:54:05 -07:00
Andrew Lunn
3cff484d4b ARM: dove: Consolidate mpp code with platform mpp.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:49:31 -04:00
Andrew Lunn
554cdaefd1 ARM: orion5x: Refactor mpp code to use common orion platform mpp.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:42:59 -04:00
Andrew Lunn
b2f427a108 ARM: orion: Refactor the MPP code common in the orion platform
mv78xx0 and kirkwood use identical mpp code.

It should also be possible to rewrite the orion5x mpp to use this
platform code.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:25:54 -04:00
Andrew Lunn
4435006190 ARM: orion: Consolidate setup of the crypto engine.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:16:17 -04:00
Michał Mirosław
6f404e441d net: Change netdev_fix_features messages loglevel
Those reduced to DEBUG can possibly be triggered by unprivileged processes
and are nothing exceptional. Illegal checksum combinations can only be
caused by driver bug, so promote those messages to WARN.

Since GSO without SG will now only cause DEBUG message from
netdev_fix_features(), remove the workaround from register_netdevice().

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 15:14:21 -04:00
Andrew Lunn
9e613f8a79 ARM: orion: Consolidate SATA platform setup.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:13:19 -04:00
Andrew Lunn
4fcd3f374a ARM: orion: Consolidate USB platform setup code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:11:33 -04:00
Andrew Lunn
ee9627234d ARM: orion: Consolidate the XOR platform setup code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:10:50 -04:00
Andrew Lunn
5e00d3783d ARM: orion: Consolidate the platform data setup for the watchdog.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:10:03 -04:00
Andrew Lunn
980f9f601a ARM: orion: Consolidate SPI initialization.
This change removes the interrupt resource. The driver does not use
it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:09:07 -04:00
Andrew Lunn
aac7ffa3ed ARM: orion: Consolidate I2C initialization.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:08:36 -04:00
Andrew Lunn
7e3819d820 ARM: orion: Consolidate ethernet platform data
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:06:01 -04:00
Thomas Jarosch
ebde6f8acb vmxnet3: Fix inconsistent LRO state after initialization
During initialization of vmxnet3, the state of LRO
gets out of sync with netdev->features.

This leads to very poor TCP performance in a IP forwarding
setup and is hitting many VMware users.

Simplified call sequence:
1. vmxnet3_declare_features() initializes "adapter->lro" to true.

2. The kernel automatically disables LRO if IP forwarding is enabled,
so vmxnet3_set_flags() gets called. This also updates netdev->features.

3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still
set to true and LRO gets enabled again, even though
netdev->features shows it's disabled.

Fix it by updating "adapter->lro", too.

The private vmxnet3 adapter flags are scheduled for removal
in net-next, see commit a0d2730c95
"net: vmxnet3: convert to hw_features".

Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6.

Please CC: comments.

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 15:05:23 -04:00
Ben Hutchings
867955f568 sfc: Fix oops in register dump after mapping change
Commit 747df2258b ('sfc: Always map MCDI
shared memory as uncacheable') introduced a separate mapping for the
MCDI shared memory (MC_TREG_SMEM).  This means we can no longer easily
include it in the register dump.  Since it is not particularly useful
in debugging, substitute a recognisable dummy value.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 15:05:23 -04:00
Martin Schwidefsky
f296388682 ftrace/s390: mcount offset calculation
Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch]
at compile time and not in ftrace_call_adjust at run time.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 15:05:06 -04:00
Andrew Lunn
4748058c5c ARM: kirkwood: Add support for RTC interrupts which allows RTC alarms.
Tested using the test program in Documentation/rtc.txt

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 15:00:10 -04:00
Martin Schwidefsky
521ccb5c4a ftrace/x86: mcount offset calculation
Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch]
at compile time and not in ftrace_call_adjust at run time.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:55:57 -04:00
KOSAKI Motohiro
2142c131a3 net: convert to new cpumask API
We plan to remove cpu_xx() old api later. Thus this patch
convert it.

This patch has no functional change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 11:53:49 -07:00
Martin Schwidefsky
07d8b595f3 ftrace/recordmcount: mcount address adjustment
Introduce mcount_adjust{,_32,_64} to the C implementation of
recordmcount analog to $mcount_adjust in the perl script.
The adjustment is added to the address of the relocations
against the mcount symbol. If this adjustment is done by
recordmcount at compile time the ftrace_call_adjust function
can be turned into a nop.

Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:53:22 -04:00
Andrew Lunn
f6eaccb30f ARM: orion: Consolidate the creation of the RTC platform data.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 14:53:06 -04:00
Eric Dumazet
5173cc0577 ipv4: more compliant RFC 3168 support
Commit 6623e3b24a (ipv4: IP defragmentation must be ECN aware) was an
attempt to not lose "Congestion Experienced" (CE) indications when
performing datagram defragmentation.

Stefanos Harhalakis raised the point that RFC 3168 requirements were not
completely met by this commit.

In particular, we MUST detect invalid combinations and eventually drop
illegal frames.

Reported-by: Stefanos Harhalakis <v13@v13.gr>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 14:49:14 -04:00
Steven Rostedt
41b402a201 ftrace/recordmcount: Add helper function get_sym_str_and_relp()
The code to get the symbol, string, and relp pointers in the two functions
sift_rel_mcount() and nop_mcount() are identical and also non-trivial.
Moving this duplicate code into a single helper function makes the code
easier to read and more maintainable.

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023739.723658553@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:48:55 -04:00
Steven Rostedt
37762cb997 ftrace/recordmcount: Remove duplicate code to find mcount symbol
The code in sift_rel_mcount() and nop_mcount() to get the mcount symbol
number is identical. Replace the two locations with a call to a function
that does the work.

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023739.488093407@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:48:02 -04:00
Steven Rostedt
2895cd2ab8 ftrace/x86: Do not trace .discard.text section
The section called .discard.text has tracing attached to it and is
currently ignored by ftrace. But it does include a call to the mcount
stub. Adding a notrace to the code keeps gcc from adding the useless
mcount caller to it.

Link: http://lkml.kernel.org/r/20110421023739.243651696@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:47:13 -04:00
Steven Rostedt
f0201738b6 ftrace: Avoid recording mcount on .init sections directly
The init and exit sections should not be traced and adding a call to
mcount to them is a waste of text and instruction cache. Have the
macro section attributes include notrace to ignore these functions
for tracing from the build.

Link: http://lkml.kernel.org/r/20110421023738.953028219@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:46:30 -04:00
Andrew Lunn
28a2b45054 ARM: orion: Consolidate the creation of the uart platform data.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 14:46:17 -04:00
Andrew Lunn
5c60255149 ARM: orion: Rename some constants to macros to make code more identical
Changing eg 0xffffffff to DMA_BIT_MASK(32) etc allows easier
side by side comparision of identical code which can be consolidated.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 14:46:17 -04:00
Steven Rostedt
85356f8022 kbuild/recordmcount: Add RECORDMCOUNT_WARN to warn about mcount callers
When mcount is called in a section that ftrace will not modify it into
a nop, we want to warn about this. But not warn about this always. Now
if the user builds the kernel with the option RECORDMCOUNT_WARN=1 then
the build will warn about mcount callers that are ignored and will just
waste execution time.

Acked-by: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20110421023738.714956282@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:45:03 -04:00
Steven Rostedt
dfad3d598c ftrace/recordmcount: Add warning logic to warn on mcount not recorded
There's some sections that should not have mcount recorded and should not have
modifications to the that code. But currently they waste some time by calling
mcount anyway (which simply returns). As the real answer should be to
either whitelist the section or have gcc ignore it fully.

This change adds a option to recordmcount to warn when it finds a section
that is ignored by ftrace but still contains mcount callers. This is not on
by default as developers may not know if the section should be completely
ignored or added to the whitelist.

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023738.476989377@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:44:20 -04:00
Steven Rostedt
ffd618fa39 ftrace/recordmcount: Make ignored mcount calls into nops at compile time
There are sections that are ignored by ftrace for the function tracing because
the text is in a section that can be removed without notice. The mcount calls
in these sections are ignored and ftrace never sees them. The downside of this
is that the functions in these sections still call mcount. Although the mcount
function is defined in assembly simply as a return, this added overhead is
unnecessary.

The solution is to convert these callers into nops at compile time.
A better solution is to add 'notrace' to the section markers, but as new sections
come up all the time, it would be nice that they are delt with when they
are created.

Later patches will deal with finding these sections and doing the proper solution.

Thanks to H. Peter Anvin for giving me the right nops to use for x86.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023738.237101176@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:43:32 -04:00
Steven Rostedt
8abd5724a7 ftrace/recordmcount: Modify only executable sections
PROGBITS is not enough to determine if the section should be modified
or not. Only process sections that are marked as executable.

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.991485123@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:42:56 -04:00
Steven Rostedt
9f087e7612 ftrace: Add .kprobe.text section to whitelist for recordmcount.c
The .kprobe.text section is safe to modify mcount to nop and tracing.
Add it to the whitelist in recordmcount.c and recordmcount.pl.

Cc: John Reiser <jreiser@bitwagon.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20110421023737.743350547@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:42:15 -04:00
Steven Rostedt
e90b0c8bf2 ftrace/trivial: Clean up record mcount to use Linux switch style
The Linux style for switch statements is:

	switch (var) {
	case x:
		[...]
		break;
	}

Not:
	switch (var) {
	case x: {
		[...]
	} break;

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.523968644@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:41:07 -04:00
Steven Rostedt
dd5477ff3b ftrace/trivial: Clean up recordmcount.c to use Linux style comparisons
The Linux ftrace subsystem style for comparing is:

  var == 1
  var > 0

and not:

  1 == var
  0 < var

It is considered that Linux developers are smart enough not to do the

  if (var = 1)

mistake.

Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.290712238@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16 14:38:51 -04:00
Thomas Gleixner
e59347a1d1 arm: orion: Use generic irq chip
The core interrupt chip is a straight forward conversion. The gpio
chip is implemented with two instances of the irq_chip_type which can
be switched with the irq_set_type function. That allows us to use the
generic callbacks and avoids the conditionals in them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16 14:34:54 -04:00
Larry Finger
099fb8ab1e rtlwifi: rtl8192c-common: rtl8192ce: Fix for HT40 regression
The changes that were made to rtl8192ce when rtl8192cu was added broke
HT40. The errors included a typo in rtlwifi, a missing routine in
rtl8192ce and a missing callback of that routine in rtl8192c-common.

This patch fixes the regression reported in Bug #35082.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:30 -04:00
Johannes Berg
349eb8cf45 mac80211: annotate and fix RCU in mesh code
This adds proper RCU annotations to the mesh path
table code, and fixes a number of bugs in the code
that I found while checking the sparse warnings I
got as a result of the annotations.

Some things like the changes in mesh_path_add() or
mesh_pathtbl_init() only serve to shut up sparse,
but other changes like the changes surrounding the
for_each_mesh_entry() macro fix real RCU bugs in
the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:29 -04:00
Johannes Berg
1928ecab62 mac80211: fix and simplify mesh locking
The locking in mesh_{mpath,mpp}_table_grow not only
has an rcu_read_unlock() missing, it's also racy
(though really only technically since it's invoked
from a single function only) since it obtains the
new size of the table without any locking, so two
invocations of the function could attempt the same
resize.

Additionally, it uses synchronize_rcu() which is
rather expensive and can be avoided trivially here.

Modify the functions to only use the table lock
and use call_rcu() instead of synchronize_rcu().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:29 -04:00
Johannes Berg
d07c7cf49a mac80211: add missing rcu_barrier
mac80211 uses call_rcu() with functions that are
defined in the module, so it must use rcu_barrier()
at module exit time.

Luckily, this seems to not be a problem in practice
as module unload and unregistration takes a long
time and probably does multiple synchronize_rcu().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:29 -04:00
Rafał Miłecki
9594b56dbe bcma: add PCI ID of the card found in Thinkpad X120e
Reported-by: Gottfried Haider <gottfried.haider@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:29 -04:00
Rajkumar Manoharan
c29acf2010 mac80211: abort scan_work immediately when the device goes down
As long as no delay is required b/w channel change, scan work
is proceeding without scheduling a new work. In such case, we
can not abort scan work when the card was unplugged. This patch
completes the scanning immediately whenever the device goes down.

Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:29 -04:00
Johannes Berg
8e621fc90b mac80211: verify IBSS in interface combinations
Drivers shouldn't attempt to advertise support
for more than one IBSS interface since mac80211
doesn't support that. Check and return an error
from ieee80211_register_hw() in that case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:28 -04:00
Christian Lamparter
df64962f7d carl9170: advertise interface combinations
In order to provide multiple interfaces for a single device,
the driver will be required to advertise all possible
interface configurations to the stack.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:28 -04:00
Rafał Miłecki
dedb1eb977 b43: rename b43_wldev's field with ssb_device to sdev
We free name "dev" for something generic (like dev abstraction layer).
Additionaly code is cleaner now, especially magic dev->dev-dev chains.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:28 -04:00
Javier Cardona
d0df9eecf9 mac80211: Deactivate mesh path timers when freeing nodes
Mesh paths are deleted via mesh_path_del() which properly
deactivates the timer associated to a mesh path.  But if paths were
deleted by mesh_table_free(..., true) timers would not be deactivated.
This fixes this case.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:28 -04:00
Alexey Dobriyan
011159a0a7 airo: correct proc entry creation interfaces
* use proc_mkdir_mode() instead of create_proc_entry(S_IFDIR|...),
  export proc_mkdir_mode() for that, oh well.
* don't supply S_IFREG to proc_create_data(), it's unnecessary

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:28 -04:00
Christian Lamparter
9368a9a237 p54usb: add zoom 4410 usbid
Cc: <stable@kernel.org>
Reported-by: Mark Davis <marked86@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16 14:25:27 -04:00