This patch fixes an extremely rare mount failure after a power cut, when mount
fails with ENOSPC error because UBIFS could not find the GC LEB.
In short, the reason for this failure is that after recovery the GC head LEB
contains less free space than it had contained just before the power cut
happened. As a result, if the FS is full, 'ubifs_rcvry_gc_commit()' is unable
to find a dirty LEB to GC and a free LEB, so mount fails.
This patch contains a huge comment with more detailed explanation, please refer
that comment.
Since this is really really rare and unlikely situation, I do not send this
patch to the stable tree, also because it requires a lot of preparation
patches which I did before. So sending this to -stable would be too risky.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Further simplify 'ubifs_recover_leb()' by noticing that we have to call
'clean_buf()' in any case, and it is fine to call it if the offset is
aligned to 'c->min_io_size'. Thus, we do not have to call it separately
from every "if" - just call it once at the end.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Now when we call 'ubifs_recover_leb()' only for LEBs which are potentially
corrupted (i.e., only for last buds, not for all of them), we can cleanup every
LEB, not only those where we find corruption. The reason - unstable bits. Even
though the LEB may look good now, it might contain unstable bits which may hit
us a bit later.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch cleans up 'ubifs_recover_leb()' function and makes it more readable.
Move things which are done only once out of the loop and kill unneeded 'switch'
statement.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Some Cisco phones do not place the Content-Length field at the end of the
SIP message. This is valid, due to a misunderstanding of the specification
the parser expects the SDP body to start directly after the Content-Length
field. Fix the parser to scan for \r\n\r\n to locate the beginning of the
SDP body.
Reported-by: Teresa Kang <teresa_kang@gemtek.com.tw>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Verify that the message length of a single SIP message, which is calculated
based on the Content-Length field contained in the SIP message, does not
exceed the packet boundaries.
Signed-off-by: Patrick McHardy <kaber@trash.net>
There are no signs of a dmic at node 0x0b, so the user is left with
an additional internal mic which does not exist. This commit removes
that non-existing mic.
Cc: stable@kernel.org (2.6.32+)
BugLink: http://bugs.launchpad.net/bugs/731706
Reported-by: James Page <james.page@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes a bug reported by a customer, who found
that many unreasonable error interrupts reported on all
non-boot CPUs (APs) during the system boot stage.
According to Chapter 10 of Intel Software Developer Manual
Volume 3A, Local APIC may signal an illegal vector error when
an LVT entry is set as an illegal vector value (0~15) under
FIXED delivery mode (bits 8-11 is 0), regardless of whether
the mask bit is set or an interrupt actually happen. These
errors are seen as error interrupts.
The initial value of thermal LVT entries on all APs always reads
0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
sequence to them and LVT registers are reset to 0s except for
the mask bits which are set to 1s when APs receive INIT IPI.
When the BIOS takes over the thermal throttling interrupt,
the LVT thermal deliver mode should be SMI and it is required
from the kernel to keep AP's LVT thermal monitoring register
programmed as such as well.
This issue happens when BIOS does not take over thermal throttling
interrupt, AP's LVT thermal monitor register will be restored to
0x10000 which means vector 0 and fixed deliver mode, so all APs will
signal illegal vector error interrupts.
This patch check if interrupt delivery mode is not fixed mode before
restoring AP's LVT thermal monitor register.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yong Wang <yong.y.wang@intel.com>
Cc: hpa@linux.intel.com
Cc: joe@perches.com
Cc: jbaron@redhat.com
Cc: trenn@suse.de
Cc: kent.liu@intel.com
Cc: chaohong.guo@intel.com
Cc: <stable@kernel.org> # As far back as possible
Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a UBIFS filesystem is being mounted read-write, or is being remounted
from read-only to read-write, check for the "space_fixup" flag and fix
all LEBs containing empty space if necessary.
Artem: tweaked the patch a bit
Signed-off-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch adds the 'ubifs_fixup_free_space()' function which scans all
LEBs in the filesystem for those that are in-use but have one or more
empty pages, then re-maps the LEBs in order to erase the empty portions.
Afterward it removes the "space_fixup" flag from the UBIFS superblock.
Artem: massaged the patch
Signed-off-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'space_fixup' flag can be set in the superblock of a new filesystem by
mkfs.ubifs to indicate that any eraseblocks with free space remaining should be
fixed-up the first time it's mounted (after which the flag is un-set). This
means that the UBIFS image has been flashed by a "dumb" flasher and the free
space has been actually programmed (writing all 0xFFs), so this free space
cannot be used. UBIFS fixes the free space up by re-writing the contents of all
LEBs with free space using the atomic LEB change UBI operation.
Artem: improved commit message, add some more commentaries to the code.
Signed-off-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We'll need to use the 'next_log_lnum()' helper function from log.c in the fixup
code, so let's move it to misc.h. IOW, this is a preparation to the following
free space fixup changes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch improves UBIFS recovery and teaches it to expect corruption only
in the last buds. Indeed, currently we just recover all buds, which is
incorrect because only the last buds can have corruptions in case of a power
cut. So it is inconsistent with the rest of the recovery strategy which tries
hard to distinguish between corruptions cause by power cuts and other types of
corruptions.
This patch also adds one quirk - a bit older UBIFS was could have corruption in
the next to last bud because of the way it switched buds: when bud A is full,
it first searched for the next bud B, the wrote a reference node to the log
about B, and then synchronized the write-buffer of A. So we could end up with
buds A and B, where B is the last, but A had corruption. The UBIFS behavior
was fixed, though, so currently it always first synchronizes A's write-buffer
and only after this adds B to the log. However, to be make sure that we handle
unclean (after a power cut) UBIFS images belonging to older UBIFS - we need to
add a quirk and keep it for some time: we need to check for the situation
described above.
Thankfully, it is easy to check for that situation. When UBIFS adds B to the
log, it always first unmaps B, then maps it, and then syncs A's write-buffer.
Thus, in that situation we can check that B is empty, in which case it is OK to
have corruption in A. To check that B is empty it is enough to just read the
first few bytes of the bud and compare them with 0xFFs. This quirk may be
removed in a couple of years.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The current mainline codes of ARCH_S5PC100 cannot support
suspend to ram. So needs this for preventing build error.
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The line buffer sizes vary across DSI modules, create a function
dsi_get_line_buf_size() using DSI_GNQ register to get the size of
line buffer used for the DISPC video port data.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On OMAP3, the DSI module has 2 data lanes. On OMAP4, DSI1 has 4 data lanes
and DSI2 has 2 data lanes. Introduce function dsi_get_num_data_lanes() which
returns the number of data lanes on the dsi interface, introduce function
dsi_get_num_data_lanes_dssdev() which returns the number of data lanes used by
the omap_dss_device connected to the lanes.
Use the DSI_GNQ register on OMAP4 to get the number of data lanes, modify
dsi.c to use the number of lanes and the extra data lanes on DSI1.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In the previous DSI driver design, a private workqueue was needed to prevent a
deadlock as explained in the commit : 0f16aa0ae6
. In the current design, the workqueue is only used for queueing delayed work in
the case where we don't get a FRAMEDONE interrupt for 250 milliseconds. It is
safe to remove the private workqueue amd use the system workqueue instead to
schedule the delayed work with the new design where the deadlock can't occur.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
dsi_dump_clocks() prints lck and pck rates for the DISPC channel which it is
connected to. Remove this since it is already printed by dispc_dump_clocks()
in debugfs.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Check the routing more exactly for avoiding the duplicated controls for
the very same effect for multiple capture routes in Conexant auto-parser.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the intermediate selector widget in the capture path provides the
boost volume, create the corresponding volume control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use generic irq chip for omap2 & 3.
Note that this patch also leaves out the spurious IRQ warning
for omap3.
This warning should no longer be needed as the interrupt handlers
for various devices have implemented the necessayr read-back of
the posted write.
Signed-off-by: Tony Lindgren <tony@atomide.com>
If the inverse loadweight should be zero, function "calc_delta_mine"
calculates the inverse of "lw->weight" (in 32bit integer ops).
This calculation is actually a little bit impure (because it is
inverting something around "lw-weight"+1), especially when
"lw->weight" becomes smaller.
The correct inverse would be 1/lw->weight multiplied by
"WMULT_CONST" for fixcomma-scaling it into integers.
(So WMULT_CONST/lw->weight ...)
The old, impure algorithm took two divisions for inverting lw->weight,
the new, more exact one only takes one and an additional unlikely-if.
Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-0pz0wnyalr4tk4ln11xwumdx@git.kernel.org
[ This could explain some aritmetical issues for small shares but nothing
concrete has been reported yet so we are not confident enough to queue
this up in sched/urgent and for -stable backport. But if anyone finds
this commit and sees it to fix some badness then we can certainly
change our mind! ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If cpumask_equal(&p->cpus_allowed, new_mask) is true, seems
there is no reason to prevent set_cpus_allowed_ptr() return
directly.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110509140705.GA2219@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If an RT task is awakened while it's rt_rq is throttled, the time between
wakeup/enqueue and unthrottle/selection may be accounted as rt_time
if the CPU is idle. Set rq->skip_clock_update negative upon throttle
release to tell put_prev_task() that we need a clock update.
Reported-by: Thomas Giesel <skoe@directbox.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1304059010.7472.1.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is to fix the real-time scheduler bug reported at:
https://lkml.org/lkml/2011/4/26/13
That is, when running multiple real-time threads on every logical CPUs
and then turning off one CPU, the kernel will bug at function
__disable_runtime().
Function __disable_runtime() bugs and reports leakage of rt_rq runtime.
The root cause is __disable_runtime() assumes it iterates through all
the existing rt_rq's while walking rq->leaf_rt_rq_list, which actually
contains only runnable rt_rq's. This problem also applies to
__enable_runtime() and print_rt_stats().
The patch is based on above analysis, appears to fix the problem, but is
only lightly tested.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cheng Xu <chengxu@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4DCE1F12.6040609@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently when UBIFS fills up the current bud (which is the last in the journal
head) and switches to the next bud, it first writes the log reference node for
the next bud and only after this synchronizes the write-buffer of the previous
bud. This is not a big deal, but an unclean power cut may lead to a situation
when we have corruption in a next-to-last bud, although it is much more logical
that we have to have corruption only in the last bud.
This patch also removes write-buffer synchronization from
'ubifs_wbuf_seek_nolock()' because this is not needed anymore (we synchronize
the write-buffer explicitly everywhere now) and also because this is just
prone to various errors.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Remove a 'BUG()' statement when we are unable to find a bud and add a
similar 'ubifs_assert()' statement instead.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is a minor preparation patch which changes 'replay_bud()' interface -
instead of passing bud lnum, offs, jhead, etc directly, pass a pointer to the
bud entry which contains all the information. The bud entry will be also needed
in one of the following patches.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch simplifies replay even further - it removes the replay tree and
adds the replay list instead. Indeed, we just do not need to use a tree here -
all we need to do is to add all nodes to the list and then sort it. Using
RB-tree is an overkill - more code and slower. And since we replay buds in
order, we expect the nodes to follow in _mostly_ sorted order, so the merge
sort becomes much cheaper in average than an RB-tree.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch simplifies the replay code and makes it smaller. First of all, we
can notice that we do not really need to create bud replay entries and insert
them to the replay tree, because the only reason we do this is to set buds
lprops correctly at the end. Instead, we can just walk the list of buds at the
very end and set lprops for each bud. This allows us to get rid of whole
'insert_ref_node()' function, the 'REPLAY_REF' flag, and several fields in
'struct replay_entry'. Then we can also notice that we do not need the 'flags'
'struct replay_entry' field, because there is only one flag -
'REPLAY_DELETION'. Instead, we can just add a 'deletion' bit fields. As a
result, this patch deletes much more lines that in adds.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is just a small preparation patch which adds 'free' and 'drity' fields to
'struct bud_entry'. They will be used to set bud lprops.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is patch removes an unnecessary 'offs' variable from 'ubifs_wbuf_write_nolock()'
- we can just keep 'wbuf->offs' up-to-date instead. This patch is very minor
the only motivation for it was that it is cleaner to keep wbuf->offs up-to-date
by the time we call 'ubifs_leb_write()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Commit 52c6e6f990 provides misleading infomation
in the commit messages - buds are replied in order. And the real reason why
that fix helped is probably because it made sure we seek head even in read-only
mode (so deferred recovery will have seeked heads).
This patch adds an assertion which will fire if we reply buds out of order.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is a minor change which makes 2 functions static because they
are not used outside the gc.c file: 'data_nodes_cmp()' and
'nondata_nodes_cmp()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Now we return all errors from 'scan_check_cb()' directly, so we do not need
'struct scan_check_data' any more, and this patch removes it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Simplify error path in 'scan_check_cb()' and stop using the special 'data->err'
field, but instead return the error code directly.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When doing the lprops extra check ('dbg_check_lprops()') we scan whole media.
We even scan empty and freeable LEBs which may contain garbage, which we handle
after scanning. This patch teach the lprops checking function
('scan_check_cb()') to avoid scanning for free and freeable LEBs and save time.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Loading fpu without aesni-intel does nothing. Loading aesni-intel
without fpu causes modes like xts to fail. (Unloading
aesni-intel will restore those modes.)
One solution would be to make aesni-intel depend on fpu, but it
seems cleaner to just combine the modules.
This is probably responsible for bugs like:
https://bugzilla.redhat.com/show_bug.cgi?id=589390
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to removing ARCH_S5P6442, we don't need to support
sound for S5P6442.
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Added digital mute function in DAI1 and DAI2.
Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Moved the EX Limiter Mode from dapm widget to control, because it was not
required DAPM route.
Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Fixed invalid register definitions in mixer controls such as left
speaker mixer, left hp mixer and left rec mixer.
Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
We need to hold the dev->mode_config.mutex whilst detecting the output
status. But we also need to drop it for the call into
drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when
attaching the fbcon.
Failure to do so exposes a race with normal output probing. Detected by
adding some warnings that the mutex is held to the backend detect routines:
[ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]()
[ 17.772458] Hardware name: Latitude E6400
[ 17.772460] Modules linked in: ....
[ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8
[ 17.772584] Call Trace:
[ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c
[ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915]
[ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper]
[ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper]
[ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper]
[ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper]
[ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345
[ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper]
[ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e
[ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172
[ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82
[ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10
[ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82
[ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10
Reported-by: Frederik Himpe <fhimpe@telenet.be>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36394
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix build errors when CONFIG_ACPI is enabled but MXM_WMI is not enabled
by selecting both MXM_WMI and ACPI_WMI (the latter just for kconfig
dependencies):
nouveau_acpi.c:(.text+0x2400c8): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2400cf): undefined reference to `mxm_wmi_call_mxds'
nouveau_acpi.c:(.text+0x2400fe): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2402ba): undefined reference to `mxm_wmi_supported
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>