Commit graph

254,703 commits

Author SHA1 Message Date
Linus Torvalds
d14f5b810b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  ipv6: Don't pass invalid dst_entry pointer to dst_release().
  mlx4: fix kfree on error path in new_steering_entry()
  tcp: len check is unnecessarily devastating, change to WARN_ON
  sctp: malloc enough room for asconf-ack chunk
  sctp: fix auth_hmacs field's length of struct sctp_cookie
  net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM
  usbnet: use eth%d name for known ethernet devices
  starfire: clean up dma_addr_t size test
  iwlegacy: fix bugs in change_interface
  carl9170: Fix tx aggregation problems with some clients
  iwl3945: disable hw scan by default
  wireless: rt2x00: rt2800usb.c add and identify ids
  iwl3945: do not deprecate software scan
  mac80211: fix aggregation frame release during timeout
  cfg80211: fix BSS double-unlinking (continued)
  cfg80211:: fix possible NULL pointer dereference
  mac80211: fix possible NULL pointer dereference
  mac80211: fix NULL pointer dereference in ieee80211_key_alloc()
  ath9k: fix a chip wakeup related crash in ath9k_start
  mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS rates
  ...
2011-04-05 12:26:57 -07:00
Michael Hennerich
59c23eabda staging: IIO: DAC: New driver for the AD5504 and AD55041 High Voltage DACs
Changes since V1:

IIO: DAC: Apply review feedback from Jonathan

Fix array size and declare const.
Fix reversed dacY_powerdown read back.
Use individual attribute groups instead of is_visible.
Fix event naming and add the _en file.

Changes since V2:

IIO: DAC: AD5504 use proper event type

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 12:10:59 -07:00
Michael Hennerich
d6f087ec9c staging: IIO: ADC: New driver for the AD7780 / AD7781 24-bit Sigma-Delta ADC
Changes since v1:

IIO: ADC: AD7780: Apply review feedback

Abort probe() with error in case platform_data is not present.
Add comment explaining power down reset (PDRST) GPIO handling
and dual function DOUT/RDY interrupt usage.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 12:04:55 -07:00
Alan Cox
8a789f8c30 staging: gma500: Add oaktrail
Oaktrail needs a couple of slight plumbing tweaks

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:41:13 -07:00
Alan Cox
cb048d5586 staging: gma500: enable the 2D op stuff
Well one of them anyway - not yet sure why the other fails

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:41:12 -07:00
Masami Hiramatsu
1d46ea2a6a perf probe: Fix listing incorrect line number with inline function
Fix a bug showing incorrect line number when a probe is put on the head of an
inline function. This patch updates find_perf_probe_point() and introduces new
rules to get correct line number.

 - If debuginfo doesn't have a correct file name, we shouldn't return line
   number too, because, without file name, line number is meaningless.

 - If the address is in a function, it stores the function name and the offset
   from the function entry.

   - If the address is on a line, it tries to get the relative line number from
     the function entry line, except for the address is same as the entry
     address of the function (in this case, the relative line number should
     be 0).

     - If the address is in an inline function entry (call-site), it uses the
       inline function call line number as the line on which the address is.

   - If the address is in an inline function body, it stores the inline
     function name and offset from the inline function call site instead of the
     (non-inlined) function.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092605.2132.11629.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:38:12 -03:00
Masami Hiramatsu
1d878083c2 perf probe: Fix to find recursively inlined function
Fix die_find_inlinefunc() to return correct innermost inlined function
at given address. Without this fix, it returns the outermost inlined
function.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092559.2132.78634.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:36:47 -03:00
Alan Cox
636fa5c78c staging: gma500: psb_reset actually holds lid functions
So rename the file something sensible

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:35 -07:00
Alan Cox
9c6ac29cb0 staging: gma500: Set the TWOD base
2D accel still doesn't work but now it doesn't crash either

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:34 -07:00
Alan Cox
3350dead09 staging: gma500: cleanup the SDVO messages
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:32 -07:00
Alan Cox
c3460fd3ec staging: gma500: begin tidying up the power management
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:30 -07:00
Alan Cox
a3461ee16c staging: gma500: prune more unused fields
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:27 -07:00
Alan Cox
9917294623 staging: gma500: Add a test ioctl for issuing 2D accel ops via user space
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:25 -07:00
Alan Cox
ad9f792e67 staging: gma500: Fix some set up bugs found by comparing driver versions
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:23 -07:00
Alan Cox
0c6b262753 staging: gma500: kill some more #if 0 bits
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:22 -07:00
Alan Cox
b0e2326ca7 staging: gma500: Another file we don't need
Zap... bang

And take out a few more variables that are now dead

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:36:20 -07:00
Masami Hiramatsu
cc446446ff perf probe: Fix multiple --vars options behavior
Fix a bug that perf-probe fails to initialize libdwfl and shows incorrect error
when user gives multiple --vars options.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092553.2132.42691.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:36:04 -03:00
Masami Hiramatsu
f0c4801a17 perf probe: Fix to remove redundant close
Since dwfl_end() closes given fd with dwfl, caller doesn't need to close its fd
when finishing process.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092547.2132.93728.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:35:16 -03:00
Masami Hiramatsu
7d21635ac5 perf probe: Fix to ensure function declared file
Fix to ensure function declared file matches given file name. This fixes
a potential bug.

As I've commented on Lin Ming's fastpath enhancement, decl_file should
be checked on each probe point if user gives a probe point as func@file.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092541.2132.3584.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:34:53 -03:00
Alan Cox
c34433b19d staging: gma500: turn on psb SDVO
Keep this as its own commit for bisection purposes

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:50 -07:00
Justin P. Mattock
8fc5945f8f staging: gma500: Remove extra semi-colon.
The patch below removes an extra semi-colon from various parts
of the kernel. Please have a look when you have time, and let
me know if its legit or not.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:49 -07:00
Alan Cox
aea74b6567 staging: gma500: kill off TTM
We are not using TTM, we are not going to use TTM either

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:49 -07:00
Alan Cox
0b35c063b2 staging: gma500: pull mrst firmware stuff into its own header
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:48 -07:00
Alan Cox
5c7d3a7aba staging: gma500: Clean up more unused structures and code
We don't need the 3D validation stuff so it and all the related gunge can
depart. While we are at it prune some unused definitions.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:48 -07:00
Alan Cox
1163a0b88c staging: gma500: We don't support the CI either
The camera interface is also not covered (and we won't be using TTM anyway
even if it ever re-emerges) so it to can go

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:47 -07:00
Alan Cox
7e2c6c433e staging: gma500: delete the RAR handling
RAR registers are used on MID platforms for various protected video
playback activities using video playback engines we don't support.

So Rasputin can keep his Rars

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:47 -07:00
Alan Cox
c69a20369b staging: gma500: Add Moorestown identifiers
Turn it on, turn it up, turn it loose

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:46 -07:00
Alan Cox
427096db84 staging: gma500: Moorestown does its setup differently
Grovel the firmware via the Moorestown interfaces and read the other bits
off the fuses.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:46 -07:00
Alan Cox
e68e8c711b staging: gma500: enable Moorestown CRTC handling
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:45 -07:00
Alan Cox
9ba06b5fab staging: gma500: add framebuffer setup
For Moorestown we want to use the mrst LVDS setup not the Poulsbo setup

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:45 -07:00
Alan Cox
a7cf87e64a staging: gma500: Add Moorestown backlight support
Which is of course different to Poulsbo.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:44 -07:00
Alan Cox
f4f7868bf9 staging: gma500: Makefiles
Build the new files now all the changes they need are present. They won't
yet be used but the plumbing is next step.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:44 -07:00
Alan Cox
d3fc13d8fb staging: gma500: Add moorestown specific data to the device structure
Moorestown needs somewhere to stash various pipe config registers and the
firmware and fuse configurations

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:43 -07:00
Alan Cox
a9100caeea staging: gma500: Add moorestown config structures
We have a set of firmware passed descriptors and things we need to grovel
through for video configuration. This differs from the setup for the PC
style Poulsbo hardware.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:43 -07:00
Alan Cox
c9981d941c staging: gma500: Make some of the lvds operations non-static
We need these as they are also used by the Moorestown LVDS display support.
Make the various needed symbols visible in the headers

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:42 -07:00
Alan Cox
54edcea62d staging: gma500: Add moorestown lvds driver code
Add the new files needed for the GMA500 driver to support Moorestown LVDS
displays. Don't wire them in yet.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:42 -07:00
Alan Cox
2627aaa679 staging: gma500: begin adding Moorestown support
The Moorestown systems have some graphics differences we care about and some
we don't need to.

To start with it has a single pipe and that pipe can be used for LVDS

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-05 11:27:41 -07:00
Alexey Dobriyan
db940cb0db Bluetooth: convert net/bluetooth/ to kstrtox
Convert from strict_strto*() interfaces to kstrto*() interfaces.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 13:21:11 -03:00
Chris Wilson
a6737ad15b drm/i915/lvds: Remove 0xa0 DDC probe for LVDS
This is a revert of 428d2e828c.

This is broken in the same manner as for VGA: trying to write to an
invalid address on the (currently 7-bit) i2c bus.

One notable failure appears to be for MacBooks. The scary part was that
it gave the appearance of working (i.e. reporting the absence of the
panel) on various all-in-one machines with ghost LVDS panels and not
failing for laptops.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-04-05 09:05:56 -07:00
Chris Wilson
0de009c900 drm/i915/crt: Remove 0xa0 probe for VGA
This is a moral revert of 6ec3d0c0e9.

Following the fix to reset the GMBUS controller after a NAK, we finally
utilize the 0xa0 probe for a CRT connection. And discover that the code
is broken. Shock.

There are a number of issues, but following a key insight from Dave
Airlie, that 0xA0 is an invalid address on a 7-bit bus (though not if we
were to enable 10-bit addressing), and would look like the EDID port
0x50, it is possible to see where the confusion starts.

In short, a write to 0xA0 is accepted by the GMBUS controller which we
interpreted as meaning the existence of a connection (a slave on the
other end of the wire ACKing the write). That was false.

During testing with a broken GMBUS implementation, which never reset an
earlier NAK, this test always reported a NAK and so we proceeded on to
the next test.

Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35904
Reported-and-tested-by:  Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32612
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-04-05 09:05:34 -07:00
Gustavo F. Padovan
e63a15ec0f Bluetooth: Use GFP_KERNEL in user context
The allocation in mgmt_control() code are in user context and not locked
by any spinlock, so it's not recommended the use of GFP_ATOMIC there.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 13:03:10 -03:00
Gustavo F. Padovan
1322901da5 Bluetooth: Don't use spin_lock_bh in user context
spin_lock() and spin_unlock() are more apropiated for user context.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 12:58:40 -03:00
David Teigland
2a7ce0edd6 dlm: remove shared message stub for recovery
kmalloc a stub message struct during recovery instead of sharing the
struct in the lockspace.  This leaves the lockspace stub_ms only for
faking downconvert replies, where it is never modified and sharing
is not a problem.

Also improve the debug messages in the same recovery function.

Signed-off-by: David Teigland <teigland@redhat.com>
2011-04-05 10:54:47 -05:00
Szymon Janc
fada4ac339 Bluetooth: Use kthread API in cmtp
kernel_thread() is a low-level implementation detail and
EXPORT_SYMBOL(kernel_thread) is scheduled for removal.
Use the <linux/kthread.h> API instead.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 12:40:47 -03:00
Szymon Janc
f4d7cd4a4c Bluetooth: Use kthread API in bnep
kernel_thread() is a low-level implementation detail and
EXPORT_SYMBOL(kernel_thread) is scheduled for removal.
Use the <linux/kthread.h> API instead.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 12:40:47 -03:00
Szymon Janc
aabf6f897e Bluetooth: Use kthread API in hidp
kernel_thread() is a low-level implementation detail and
EXPORT_SYMBOL(kernel_thread) is scheduled for removal.
Use the <linux/kthread.h> API instead.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05 12:40:46 -03:00
Ben Hutchings
c5e129ac2f sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_id
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:12:12 +01:00
Ben Hutchings
68f512f21a ethtool: Change ETHTOOL_PHYS_ID implementation to allow dropping RTNL
The ethtool ETHTOOL_PHYS_ID command runs for an arbitrarily long
period of time, holding the RTNL lock.  This blocks routing updates,
device enumeration, and various important operations that one might
want to keep running while hunting for the flashing LED.

We need to drop the RTNL lock during this operation, but currently the
core implementation is a thin wrapper around a driver operation and
drivers may well depend upon holding the lock.

Define a new driver operation 'set_phys_id' with an argument that sets
the ID indicator on/off/inactive/active (the last optional, for any
driver or firmware that prefers to handle blinking asynchronously).
When this is defined, the ethtool core drops the lock while waiting
and only acquires it around calls to this operation.

Deprecate the 'phys_id' operation in favour of this.  It can be
removed once all in-tree drivers are converted.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:12:01 +01:00
Ben Hutchings
8717d07b11 ethtool: Fill out and update comment for struct ethtool_ops
Briefly document all operations (except get_rx_ntuple), including
whether they may return an error code and whether they are deprecated.
Also mention some things that should be handled by the ethtool core
rather than by drivers.

Briefly document general requirements for callers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:08:17 +01:00
Ben Hutchings
e20b5b61a3 ethtool: Convert struct ethtool_ops comment to kernel-doc format
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:01:41 +01:00