This was enabled by default but its pretty useless for upstream
given that its sendign some custom wireless event. These need
to be reviewed instead and a respective cfg80211 event / call
should be used later.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is always enabled.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes all the wext and super extended ioctl crap.
The wext interfaces are already provided by cfg80211 and
the "private" ioctl stuff defined here is not even using
private wext, they are using netdev private ioctls!
This is completely unacceptable upstream. Die. Die Die.
As part of all this we end up removing the
CONFIG_HOST_GPIO_SUPPORT which ended up being heavily
abused by the internal ioctl work.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To get upstream we can't use out of tree defines, kill
all the androidisms. ath6kl won't be usable on Android
unless external patches are supported later or Android
gets their shit together and gets all their crap upstream.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ath6kl used to have an internal PAL for Bluetooth 3.0 support
but this is no longer supported. The target used a WMI with an
ACL header for supporting these frames. Userspace would use
the ioctl AR6000_XIOCTL_ACL_DATA to send data to the target
and the firmware would generate ACL frames.
Remove both the parsing of the frames and the ioctl support.
We leave a warning for now for if the target generates some
sort of ACL data frame, later on we can remove this warning
once we have proven the target is no longer generating these
frames. It should be noted this also provides a fix for the
processing of spurious ACL data frames from the target,
previously they would not be dropped if they were generated
by the target but EXPORT_HCI_PAL_INTERFACE was not compiled
in.
Cc: Naveen Singh <nsingh@atheros.com>
Cc: Prerepa (Dham) Viswanadham <dham@atheros.com>
Cc: Shanmugamkamatchi Balashanmugam <sbalashanmugam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The check for SET_NETDEV_DEV is not required given that
this is upstream. The setting of the SET_NETDEV_DEV with
the osDevInfo.pOSDevice is redundant for the cfg80211 case
as this was already being done, so just set the netdev device
for the non-cfg80211 which was missing.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is not required.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This unwraps the do while loops in favor for function helpers.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When something fails we set up some generic error values,
instead keep the values from the callers and make sure to
pass them on.
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Leave the code in place as this is always defined statically.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for i in $(find ./drivers/staging/ath6kl/ -name \*.[ch]) ; do \
sed -r -i -e "s/A_FREE/kfree/g" $i; done
Tested-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are unused since commit a22517fec0:
Staging: w35und: remove dead code from mto.c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fix some code style warnings found by the checkpatch.pl script, changing spaces for a tab
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These 3 drivers contain much duplicated (triplicated) code, so
building them as built-in results in many errors like:
(.text+0x1b160): multiple definition of `ieee80211_sta_ps_sleep'
Prevent this configuration by making them all buildable only as
loadable modules (similar to the vt665[56] patch last week).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Issue reported by Larry Finger. Log message was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger reported this issue. Under certain conditions the log
file would be spammed with 'Short CCK' messages. Since this does
not indicate an error condition, the log message was simply
deleted. Also, the RX_FLAG_SHORTPRE flag in rx_status->flag, on
CCK reception, is now only set on short preamble reception (it used
to be set both CCK short and long preambles).
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger reported this issue. The driver, under certain
conditions, spews log messages like this:
wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 159/256
dur 1778/1504
These log messages turned out to be false alarms. Root cause was
that the AC was derived from the sk_buff::priority field. Fix was
to derive the AC from the sk_buff using skb_get_queue_mapping()
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
use Linux native defines
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Acked-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The source file contained functions for both older and current chipsets
but the brcmsmac driver does not support the older chipsets so those
functions are removed.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The source file is only used by the softmac driver and will never be
compiled with the BCMSDIO flag enabled so there is no need to have code
ifdef for this flag.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include statement of if_ether.h turned out to be unneccessary so
this is removed.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Two macro definitions in the file were either not used or meaningless and
have been removed.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The brcmsmac only supports chips with amba silicon interconnect so no
abstraction is required. The siutils functions will be removed from the
brcmsmac driver and this commit does easy replacement of siutils functions
that simply delegate to the corresponding aiutils function.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The prototype for this function occurred twice in this header file
so removed one occurrence.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
si_doattach for the fullmac driver is selected using BCMSDIO
flag. Within the function there are #ifdef BRCM_FULLMAC but
this is implicitly true so these have been removed and the
function itself is now between #ifdef BRCM_FULLMAC instead of
BCMSDIO.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch uses __copy_from_user_nocache on transmit to bypass data
cache for a performance improvement. skb_add_data_nocache and
skb_copy_to_page_nocache can be called by sendmsg functions to use
this feature, initial support is in tcp_sendmsg. This functionality is
configurable per device using ethtool.
Presumably, this feature would only be useful when the driver does
not touch the data. The feature is turned on by default if a device
indicates that it does some form of checksum offload; it is off by
default for devices that do no checksum offload or indicate no checksum
is necessary. For the former case copy-checksum is probably done
anyway, in the latter case the device is likely loopback in which case
the no cache copy is probably not beneficial.
This patch was tested using 200 instances of netperf TCP_RR with
1400 byte request and one byte reply. Platform is 16 core AMD x86.
No-cache copy disabled:
672703 tps, 97.13% utilization
50/90/99% latency:244.31 484.205 1028.41
No-cache copy enabled:
702113 tps, 96.16% utilization,
50/90/99% latency 238.56 467.56 956.955
Using 14000 byte request and response sizes demonstrate the
effects more dramatically:
No-cache copy disabled:
79571 tps, 34.34 %utlization
50/90/95% latency 1584.46 2319.59 5001.76
No-cache copy enabled:
83856 tps, 34.81% utilization
50/90/95% latency 2508.42 2622.62 2735.88
Note especially the effect on latency tail (95th percentile).
This seems to provide a nice performance improvement and is
consistent in the tests I ran. Presumably, this would provide
the greatest benfits in the presence of an application workload
stressing the cache and a lot of transmit data happening.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep WIFI power on during suspend.
Consumes 10s of milliwatts but avoids having to reload firmware
on resume. Tested on tegra2_seaboard.
Signed-off-by: Venkat Rao <vrao@broadcom.com>
Tested-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brought TODO file in line with current driver state. Moved longer
term TODO items (the ones to be done once this driver
hits mainline) to website. Removed the bugs that have been solved.
Added new TODO items.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed duplicated text sections in README. Removed Bugs/problems that no longer
occur. One brcmsmac instability remains, (to be solved with new ucode), that has
been moved to the TODO file.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Intended audience for the README file are users of the driver.
Information only interesting to developers has been moved out of
the file and placed on the website:
http://linuxwireless.org/en/users/Drivers/brcm80211
Also, resolved bugs have been removed from the README.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were separate README files for softmac and fullmac.
Fullmac file contents has been merged into the toplevel README
file.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Code is not necessary since BCMDBG does not have to
be defined for a functional driver.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Comment was a left over from a driver that handled AMPDU aggregation itself (instead
of relying on Mac80211).
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Code in wlc_ampdu.c is waiting for Mac80211 functionality to be released.
Added this information to a code comment.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Preprocessor flag BCMDBG_FORCEHT is never defined,
is a debug feature, so ifdeff'ed code has been removed. The removed
section would force the backplane clock on HT rate, which
facilitates debug but has a negative effect on power usage.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed inactive code sections (BCM_DMAPAD and CHIPC_UART_ALWAYS_ON
were never defined). Also replaced magic number by #define. Deleted
incorrect comment.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When I moved the orphan adding to btrfs_truncate I missed the fact that during
orphan cleanup we just add the orphan items to the orphan list without going
through btrfs_orphan_add, which results in lots of warnings on mount if you have
any orphan items that need to be truncated. Just remove this warning since it's
ok, this will allow all of the normal space accounting take place. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I noticed a huge problem with the free space cache that was presenting
as an early ENOSPC. Turns out when writing the free space cache out I
forgot to take into account pinned extents and more importantly
clusters. This would result in us leaking free space everytime we
unmounted the filesystem and remounted it.
I fix this by making sure to check and see if the current block group
has a cluster and writing out any entries that are in the cluster to the
cache, as well as writing any pinned extents we currently have to the
cache since those will be available for us to use the next time the fs
mounts.
This patch also adds a check to the end of load_free_space_cache to make
sure we got the right amount of free space cache, and if not make sure
to clear the cache and re-cache the old fashioned way.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.
To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.
Reported-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Andreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>
the object id of the space cache inode's key is allocated from the relative
root, just like the regular file. So we can't identify space cache inode by
checking the object id of the inode's key, and we have to clear __GFP_FS flag
at the time we look up the space cache inode.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Free btrfs_trans_handle when join_transaction() fails
in start_transaction()
Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_rename() does not release the subvol_sem if the transaction failed to start.
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we defrag a file, whose size can be fit into an inline extent,
with compression enabled, the compress type is set to be
fs_info->compress_type, which is 0 if the btrfs filesystem is mounted
without compress option. This leads to oops.
Reported-by: Daniel Blueman <daniel.blueman@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Some mount options are not displayed by /proc/mounts.
This patch displays the option such as compress_type by /proc/mounts.
Ex.
[before]
$ mount | grep sdc2
/dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo)
$ cat /proc/mounts | grep sdc2
/dev/sdc2 /test12 btrfs rw,relatime,compress 0 0
[after]
$ mount | grep sdc2
/dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo)
$ cat /proc/mounts | grep sdc2
/dev/sdc2 /test12 btrfs rw,relatime,compress=lzo,space_cache 0 0
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
While compiling Btrfs, I got following messages:
CC [M] fs/btrfs/file.o
fs/btrfs/file.c: In function '__btrfs_buffered_write':
fs/btrfs/file.c:909: warning: 'ret' may be used uninitialized in this function
CC [M] fs/btrfs/tree-defrag.o
This patch fixes compiler warning.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>