Commit graph

254,703 commits

Author SHA1 Message Date
Mike McCormack
51de57ef21 staging: rtl8192e: Remove USB related code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:10:09 -08:00
Mike McCormack
668c711bfd staging: rtl8192e: Remove useless usermode callback
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:10:08 -08:00
Roland Vossen
2d57aa7bb7 staging: brcm80211: added locks in wl_mac80211.c
Increasing robustness of the code, although no problem has been reported
in the field. Several code paths were unshielded for multi thread access.
Several lock acquisitions have been added to wl_mac80211.c

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by:   Arend van Spriel <arend@broadcom.com>
Reviewed-by:   Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:08:05 -08:00
Roland Vossen
e34870f828 staging: brcm80211: removed locks around Mac80211 calls
A spinlock was acquired prior to calling the Mac80211 functions
ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions
wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling().
This is not required and could even lead to instability. Therefore the locks
were removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by:   Arend van Spriel <arend@broadcom.com>
Reviewed-by:   Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:08:05 -08:00
Roland Vossen
55182a1006 staging: brcm80211: cosmetic changes
Code cleanup. Added lock related comments to wl_mac80211.c. Also removed a
redundant function definition.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by:   Arend van Spriel <arend@broadcom.com>
Reviewed-by:   Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:08:05 -08:00
Arend van Spriel
ce774bdcfe staging: brcm80211: remove some bsscfg attribute that are redundant
In the struct wlc_bsscfg a couple of attribute were held under a
preprocessor definition, but these are not needed in the mac80211
driver context.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:07:31 -08:00
Arend van Spriel
eff1b99a6f staging: brcm80211: allow changing channel by mac80211 when associated
When associated on 5G the driver receives a probe request for 2G with
a 2G rate specified. The driver asserts as the operating band is still
5G when the probe request packet is given. Root cause was that ioctl
function did fail upon setting the channel as requested by mac80211
when we are associated.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:07:30 -08:00
Stanislav Fomichev
f317154929 staging: brcm80211: remove the rest of broadcom specific byte swapping routines
- move ltoh16_buf/htol16_buf util/bcmsrom.c
- replace ltoh16_buf in brcmsmac/wlc_mac80211.c with several
  le16_to_cpu's

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:07:00 -08:00
Stanislav Fomichev
29750b90b5 staging: brcm80211: replace htod/dtoh broadcom defines
htod32 -> cpu_to_le32
htod16 -> cpu_to_le16
dtoh32 -> le32_to_cpu
dtoh16 -> le16_to_cpu

For brcmfmac/dhd_common.c just removed defines.

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:07:00 -08:00
Stanislav Fomichev
458b2e4df4 staging: brcm80211: remove unused broadcom byte swapping macroses
- BCMSWAP32
- bcmswap32
- BCMSWAP32BY16
- bcmswap32by16

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:07:00 -08:00
Stanislav Fomichev
56dfe3c71b staging: brcm80211: replace broadcom specific unaligned byte swapping routines
htol16_ua_store -> put_unaligned_le16
htol32_ua_store -> put_unaligned_le32
hton16_ua_store -> put_unaligned_be16
hton32_ua_store -> put_unaligned_be32
ltoh16_ua -> get_unaligned_le16
ltoh32_ua -> get_unaligned_le32
ntoh16_ua -> get_unaligned_be16
ntoh32_ua -> get_unaligned_be32

removed unused:
- load32_ua
- load16_ua
- store32_ua
- store16_ua
- ltoh_ua
- ntoh_au

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:06:59 -08:00
Stanislav Fomichev
628f10ba81 staging: brcm80211: replace broadcom specific byte swapping routines
HTON16/hton16 -> cpu_to_be16 (htons for networking code)
HTON32/hton32 -> cpu_to_be32 (htonl for networking code)
NTOH16/ntoh32 -> be16_to_cpu (ntohs for networking code)
NTOH32/ntoh32 -> be32_to_cpu (ntohl for networking code)
LTOH16/ltoh16 -> le16_to_cpu
LTOH32/ltoh32 -> le32_to_cpu
HTOL16/htol16 -> cpu_to_le16
HTOL32/htol32 -> cpu_to_le32

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:06:59 -08:00
Stephen Warren
ccac05152e ARM: Tegra: DMA: Fail safe if initialization fails
tegra_dma_init currently simply bails out early if any initialization fails.
This skips various data-structure initialization. In turn, this means that
tegra_dma_allocate_channel can still hand out channels. In this case, when
tegra_dma_free_channel is called, which calls tegra_dma_cancel, the walking
on ch->list will OOPS since the list's next/prev pointers may still be
NULL.

To solve this, add an explicit "initialized" flag, only set this once _init
has fully completed successfully, and have _allocate_channel refuse to hand
out channels if this is not set.

While at it, simplify _init:
* Remove redundant memsets
* Use bitmap_fill to mark all channels as in-use up-front, and remove
  some now-redundant bitmap initialization loops.
* Only mark a channel as free once all channel-related initialization has
  completed.

Finally, the successful exit path from _init always has ret==0, so just
hard-code that return. The error path still returns ret.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
2011-02-23 14:06:03 -08:00
Roland Vossen
1005f08574 staging: brcm80211: bugfix for crash on heavy transmit traffic
With heavy transmit traffic, once in a while (range 15mins-1hr)
a tx packet was added to a full transmit queue. Under certain
conditions an other packet in the queue gets bumped to make room
for the new packet. This is not considered an error condition, but
normal operation. Despite that, there was an ASSERT(0) that caused
the driver to oops. The ASSERT(0) has been removed. Driver was tested
afterwards.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:05:42 -08:00
Eric Dumazet
e13e02a3c6 net_sched: SFB flow scheduler
This is the Stochastic Fair Blue scheduler, based on work from :

W. Feng, D. Kandlur, D. Saha, K. Shin. Blue: A New Class of Active Queue
Management Algorithms. U. Michigan CSE-TR-387-99, April 1999.

http://www.thefengs.com/wuchang/blue/CSE-TR-387-99.pdf

This implementation is based on work done by Juliusz Chroboczek

General SFB algorithm can be found in figure 14, page 15:

B[l][n] : L x N array of bins (L levels, N bins per level)
enqueue()
Calculate hash function values h{0}, h{1}, .. h{L-1}
Update bins at each level
for i = 0 to L - 1
   if (B[i][h{i}].qlen > bin_size)
      B[i][h{i}].p_mark += p_increment;
   else if (B[i][h{i}].qlen == 0)
      B[i][h{i}].p_mark -= p_decrement;
p_min = min(B[0][h{0}].p_mark ... B[L-1][h{L-1}].p_mark);
if (p_min == 1.0)
    ratelimit();
else
    mark/drop with probabilty p_min;

I did the adaptation of Juliusz code to meet current kernel standards,
and various changes to address previous comments :

http://thread.gmane.org/gmane.linux.network/90225
http://thread.gmane.org/gmane.linux.network/90375

Default flow classifier is the rxhash introduced by RPS in 2.6.35, but
we can use an external flow classifier if wanted.

tc qdisc add dev $DEV parent 1:11 handle 11:  \
        est 0.5sec 2sec sfb limit 128

tc filter add dev $DEV protocol ip parent 11: handle 3 \
        flow hash keys dst divisor 1024

Notes:

1) SFB default child qdisc is pfifo_fast. It can be changed by another
qdisc but a child qdisc MUST not drop a packet previously queued. This
is because SFB needs to handle a dequeued packet in order to maintain
its virtual queue states. pfifo_head_drop or CHOKe should not be used.

2) ECN is enabled by default, unlike RED/CHOKe/GRED

With help from Patrick McHardy & Andi Kleen

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Juliusz Chroboczek <Juliusz.Chroboczek@pps.jussieu.fr>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Andi Kleen <andi@firstfloor.org>
CC: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 14:05:11 -08:00
Nitin Gupta
3c8bb7aab9 staging: Allow sharing xvmalloc for zram and zcache
Both zram and zcache use xvmalloc allocator. If xvmalloc
is compiled separately for both of them, we will get linker
error if they are both selected as "built-in". We can also
get linker error regarding missing xvmalloc symbols if zram
is not built.

So, we now compile xvmalloc separately and export its symbols
which are then used by both of zram and zcache.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:02:56 -08:00
Vipin Mehta
5caf8fca2d staging: ath6kl: Eliminate cfg80211 warnings
Cancel the pending scan operation once the interface is going down to
avoid warnings from the cfg80211 module. Once the interface is down,
cfg80211 checks for any pending scan requests and dumps a warning if it
finds one. It expects the driver to abort any ongoing scan operation
once the driver detects that the interface is going down.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:00:14 -08:00
Dan Carpenter
5b6567ee84 staging: ath6kl: buffer overflow in SEND_FRAME ioctl
We should check that optTxFrmCmd.optIEDataLen isn't too large before we
copy it into the data buffer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:00:13 -08:00
Stephen Warren
ddb7d5d80e ARM: Tegra: Rename clk_dev1/2 to cdev1/2
The ASoC machine driver was written assuming my previous patch to add
complete support for these clocks, which named them cdev1/2. Rename
the clocks to match that, to avoid churn in the ASoC driver.

This rename also makes the clocks more consistent with other Tegra
clocks irrespective of any of that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
2011-02-23 14:00:11 -08:00
Stephen Warren
3c106bf5b3 ARM: Tegra: Rename I2S clocks to match driver name
The driver is tegra-i2s not just i2s. Rename the clocks to match, so that
clk_get_sys can look up by driver name.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
2011-02-23 14:00:11 -08:00
Stephen Warren
dc54c23bb0 ARM: Tegra: Make tegra_dma_init a postcore_initcall
The following commit makes the Tegra APB DMA engine fail to initialize
correctly: 0cf6230af9
ARM: tegra: Move tegra_common_init to tegra_init_early

The reason is that tegra_init_early_ calls tegra_dma_init which calls
request_threaded_irq, which fails since the IRQ hasn't yet been marked
valid; that only happens in tegra_init_irq, which gets called after
tegra_init_early.

This used to work OK, since tegra_init_early was tegra_common_init, which
got called after tegra_init_irq, basically from the beginning of
tegra_harmony_init.

Solve this by converting tegra_dma_init to a postcore_initcall. This makes
it execute late enough that IRQs are marked valid, and avoids having to
add it back to every machine's init function.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
2011-02-23 14:00:11 -08:00
Dan Carpenter
253804a25b staging: ath6kl: cleanup in SEND_FRAME ioctl
The original code was written in a funny way where every statement was
part of else if blocks.  I broke them up into separate statements by
adding breaks on failure conditions.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 14:00:08 -08:00
Luis R. Rodriguez
108160db3f staging: ath6kl: update TODO file / maintainers
This updates the TODO file to reflect new changes on development.

Cc: Joe Perches <joe@perches.com>
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 13:59:56 -08:00
Colin Cross
48e5114d6f Merge branch 'boards-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra-2.6 into for-next 2011-02-23 13:58:00 -08:00
Greg Kroah-Hartman
5352161fc4 Staging: gma500: fix up trailing whitespace errors
Lots of little ones all through the driver, mostly
all in a cut-and-paste header comment.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 13:50:42 -08:00
Greg Kroah-Hartman
8997fd21bb Staging: gma500: remove psb_gfx.mod.c
The mod.c file should not be part of the repo.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 13:47:57 -08:00
Mimi Zohar
1adace9bb0 ima: remove unnecessary call to ima_must_measure
The original ima_must_measure() function based its results on cached
iint information, which required an iint be allocated for all files.
Currently, an iint is allocated only for files in policy.  As a result,
for those files in policy, ima_must_measure() is now called twice: once
to determine if the inode is in the measurement policy and, the second
time, to determine if it needs to be measured/re-measured.

The second call to ima_must_measure() unnecessarily checks to see if
the file is in policy. As we already know the file is in policy, this
patch removes the second unnecessary call to ima_must_measure(), removes
the vestige iint parameter, and just checks the iint directly to determine
if the inode has been measured or needs to be measured/re-measured.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
2011-02-23 16:38:52 -05:00
Alan Cox
0867b42113 staging: gma500: Intel GMA500 staging driver
This is an initial staging driver for the GMA500. It's been stripped out
of the PVR drivers and crunched together from various bits of code and
different kernels.

Currently it's unaccelerated but still pretty snappy even compositing with
the frame buffer X server.

Lots of work is needed to rework the ttm and bo interfaces from being
ripped out and then 2D acceleration wants putting back for framebuffer and
somehow eventually via DRM.

There is no support for the parts without open source userspace (video
accelerators, 3D) as per kernel policy.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 13:37:34 -08:00
Larry Finger
1472d3a875 rtlwifi: rtl8192ce: rtl8192cu: Fix multiple def errors for allyesconfig build
As noted by Stephan Rothwell, an allyesconfig build fails since rtl8192cu
was merged with failures such as:

drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_phy_sw_chnl':
(.opd+0xf30): multiple definition of `rtl92c_phy_sw_chnl'
drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0xb70): first defined here
drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_fill_h2c_cmd':
(.opd+0x288): multiple definition of `rtl92c_fill_h2c_cmd'
drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0x288): first defined here

These are caused because the code shared between rtl8192ce and rtl8192cu
is included in both drivers. This has been fixed by creating a new modue that
contains the shared code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:28:41 -05:00
Sebastian Andrzej Siewior
3bcbaf6e08 rtc: cmos: Add OF bindings
This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

This patch also avoids registering the platform RTC driver on X86 if
we have a device tree blob. Otherwise we would setup the device based
on the hardcoded information in arch/x86 rather than the device tree
based one.

[ tglx: Changed "int of_have_populated_dt()" to bool as recommended by
        Grant ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
LKML-Reference: <1298405266-1624-12-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:55 +01:00
Sebastian Andrzej Siewior
1fa4163bdc x86: ce4100: Use OF to setup devices
Use device tree information to setup IO_APIC configuration, interrupt
routing, HPET and everything else which cannot be enumerated by other
means.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:54 +01:00
Sebastian Andrzej Siewior
bcc7c1244f x86: ioapic: Add OF bindings for IO_APIC
ioapic_xlate provides a translation from the information in device tree
to ioapic related informations. This includes
- obtaining hw irq which is the vector number "=> pin number + gsi"
- obtaining type (level/edge/..)
- programming this information into ioapic

ioapic_add_ofnode adds an irq_domain based on informations from the device
tree. This information (irq_domain) is required in order to map a device to
its proper interrupt controller.

[ tglx: Adapted to the io_apic changes, which let us move that whole code
  	to devicetree.c ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:54 +01:00
Sebastian Andrzej Siewior
9079b35364 x86: dtb: Add generic bus probe
For now we probe these busses and we change this to board dependent
probes once we have to.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-9-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:54 +01:00
Sebastian Andrzej Siewior
96e0a0797e x86: dtb: Add support for PCI devices backed by dtb nodes
x86_of_pci_init() does two things:

- it provides a generic irq enable and disable function. enable queries
  the device tree for the interrupt information, calls ->xlate on the
  irq host and updates the pci->irq information for the device.

- it walks through PCI bus(es) in the device tree and adds its children
  (device) nodes to appropriate pci_dev nodes in kernel. So the dtb
  node information is available at probe time of the PCI device.

Adding a PCI bus based on the information in the device tree is
currently not supported. Right now direct access via ioports is used.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-8-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:53 +01:00
Sebastian Andrzej Siewior
ffb9fc68df x86: dtb: Add device tree support for HPET
Set hpet_address based on information provied form DTB

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1298405266-1624-7-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:53 +01:00
Sebastian Andrzej Siewior
3879a6f329 x86: dtb: Add early parsing of IO_APIC
APIC and IO_APIC have to be added to the system early because
native_init_IRQ() requires it.

In order to obtain the address of the ioapic the device tree has to be
unflattened so of_address_to_resource() works.

The device tree is relocated to ensure it is always covered by the
kernel mapping. That way the boot loader does not have to make
any assumptions about kernel's memory layout.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1298405266-1624-6-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:53 +01:00
Sebastian Andrzej Siewior
19c4f5f7f7 x86: dtb: Add irq domain abstraction
The here introduced irq_domain abstraction represents a generic irq
controller. It is a subset of powerpc's irq_host which is going to be
renamed to irq_domain and then become generic. This implementation will
be removed once it is generic.

The xlate callback is resposible to parse irq informations like irq type
and number and returns the hardware irq number which is reported by the
hardware as active.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-5-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:53 +01:00
Sebastian Andrzej Siewior
df2634f43f x86: dtb: Add a device tree for CE4100
History:
v1..v2:
- dropped device_type except for cpu & pci. I have the compatible string
  for pci so I can drop the device_type once it is possible
- I lowercased all compatible types. I will need to resend some patches
  which have upper case intel
- The cpu had the same compatible string as the soc node. So I added to
  the soc node -immr for internel memory mapped registers.
- I added generic names for all parts.
- I reworked the i2c bars matching the way you suggested. I added a
  compatible node for the PCI device which only the PCI ids in its
  compatible string. The bars (each represents a complete i2c
  controller) have a "intel,ce4100-i2c-controller" compatible node. It
  is not used by the driver.
  The driver is probed via PCI ids (by the pci subsystem not OF) and
  matches the bar address against the ressource in the child node. Once
  there is a hit the node is attached.
- The SPI driver is also probed via pci. However I also attached a
  compatible property based on PCI ids

v2..v3:
- intel,ce4100-immr become intel,ce4100-cp. cp stands for core
  peripherals. The Atom data sheet talks here about ACPI devices. Since
  we don't have ACPI this does not apply here.
- The interrupt map is gone. There are now plenty of device nodes.
- The "unit address string" got fixed, it uses not DD,V format.

v3..v4:
- added descriptions for compatible nodes introduced here:
  - intel,ce4100-ioapic
  - intel,ce4100-lapic
  - intel,ce4100-hpet
  - intel,ce4100
  - intel,ce4100-cp
  - intel,ce4100-pci
- added a description about I2C controller magic.
- Added gpio-controller and gpio-cells property to gpio devices. Those
  properties are not (yet) used.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:52 +01:00
Sebastian Andrzej Siewior
da6b737b9a x86: Add device tree support
This patch adds minimal support for device tree on x86. The device
tree blob is passed to the kernel via setup_data which requires at
least boot protocol 2.09.

Memory size, restricted memory regions, boot arguments are gathered
the traditional way so things like cmd_line are just here to let the
code compile.

The current plan is use the device tree as an extension and to gather
information which can not be enumerated and would have to be hardcoded
otherwise. This includes things like 
   - which devices are on this I2C/SPI bus?
   - how are the interrupts wired to IO APIC?
   - where could my hpet be?

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:52 +01:00
Sebastian Andrzej Siewior
f1c2b35714 x86: e820: Remove conditional early mapping in parse_e820_ext
This patch ensures that the memory passed from parse_setup_data() is
large enough to cover the complete data structure. That means that the
conditional mapping in parse_e820_ext() can go.

While here, I also attempt not to map two pages if the address is not
aligned to a page boundary.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-2-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:52 +01:00
Willy Tarreau
8c6113cd03 rtlwifi: Eliminate udelay calls with too large values
On ARM, compilation of rtlwifi/efuse.c fails with the message:
ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
On inspection, the faulty calls are in routine efuse_reset_loader(), a
routine that is never used, and the faulty routine is deleted.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:30 -05:00
Willy Tarreau
892c05c093 rtlwifi: Let rtlwifi build when PCI is not enabled
On systems where PCI does not exist, a build of rtlwifi will fail.
Apply the same fix in case there are systems with PCI but not USB.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:30 -05:00
Willy Tarreau
4c0f13f3e7 rtl8192cu: fix build error (vmalloc/vfree undefined)
On the ARM system, a build fails due to missing include.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:30 -05:00
Willy Tarreau
9d17e80de8 rtlwifi: Fix build when RTL8192CU is selected, but RTL8192CE is not
The wireless Makefile does not build rtlwifi for rtl8192cu unless
rtl8192ce is selected.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:30 -05:00
Johannes Berg
6ebacbb79d mac80211: rename RX_FLAG_TSFT
The flag isn't very descriptive -- the intention
is that the driver provides a TSF timestamp at
the beginning of the MPDU -- make that clearer
by renaming the flag to RX_FLAG_MACTIME_MPDU.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:29 -05:00
Vivek Natarajan
f3e85b9ede mac80211: Fix a race on enabling power save.
There is a race on sending a data frame before the tx completion
of nullfunc frame for enabling power save. As the data quickly
follows the nullfunc frame, the AP thinks that the station is out
of power save and continues to send the frames. Whereas in the
station, the nullfunc ack will be processed after the tx completion
of data frame and mac80211 goes to powersave. Thus the power
save state mismatch between the station and the AP causes some
data loss and some applications fail because of that. This patch
fixes this issue.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:29 -05:00
Rafał Miłecki
05db8c5729 b43: N-PHY: rev1: restore PHY state after RSSI operations
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:29 -05:00
Rafał Miłecki
8e60b04479 b43: N-PHY: rev1: enable some gain ctl workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:29 -05:00
Rafał Miłecki
9c1f992c77 b43: N-PHY: fix 0x2055 radio workaround condition
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:29 -05:00
Sujith Manoharan
512c044a29 ath9k_htc: Fix error path in URB allocation
ath9k_hif_usb_alloc_urbs() takes care of freeing
all the allocated URBs for the various endpoints when
an error occurs. Calling ath9k_hif_usb_dealloc_urbs() would
cause a panic since the URBs have already been freed.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23 16:25:28 -05:00