Rename ath5k_copy_channels() to ath5k_setup_channels() - nothing is copied
here.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use mac80211 channel mapping function instead of own homegrown version.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Try all xmit queues until the hardware buffers are full.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Add a misc file to show hardware op-mode, irq setup,
number of various types of VIFs and more.
Also, previous patches were using the wrong xmit queue
indexes. Change to use the internal ath9k indexes instead
of the mac80211 queue indexes.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to
IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping
channel numbers in the 2GHz and 5GHz band we can't map from channel to
frequency without knowing the band. This is no problem as in most contexts we
know the band. In places where we don't know the band (and WEXT compatibility)
we assume the 2GHz band for channels below 14.
This patch does not implement all channel to frequency mappings defined in
802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz
channels as well as 802.11y channels have been omitted.
The following drivers have been updated to reflect the API changes:
iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx.
The drivers have been compile-tested only.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The system can get into a state where the xmit queue
is stopped, but there are no packets pending, so
the queue will not be restarted.
Add logic to the xmit watchdog to attempt to restart
the xmit logic if this situation is detected.
Example 'dmesg' output:
ath: txq: f4e723e0 axq_qnum: 2, mac80211_qnum: 2 axq_link: f4e996c8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
To try to figure out why xmit logic hangs.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The stations hold the ath_node, which holds the tid
and other xmit logic structures. In order to debug
stuck xmit logic, we need a way to print out the tid
state for the stations.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Show counters for pkts sent directly to hardware and
those queued in software.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
If the txq->axq_q is empty, the code was breaking out
of the tx_processq logic without checking to see if it should
transmit other queued AMPDU frames (txq->axq_acq).
This patches ensures ath_txq_schedule is called.
This needs review.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Should help debug strange tx lockup type issues.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
I thought this might help track down stuck queues, etc.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This particular error isn't about multicast.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The notification wait support code is shared
between 4965 and other AGN devices, so 4965
also has to initialize the data structures
for it, otherwise it crashes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Previously I hacked this with an msleep(300)
which was fine since we never had longer PAN
time slots, but now that we will have them I
need to fix that. Use the new notification
wait support to properly wait for the WIPAN
deactivation complete signal from the ucode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
In order to implement waiting for notifications,
add a structure that captures the information,
and a list of such structures that will be
traversed when a command is received from the
ucode.
Use sparse checking to make sure calls to the
prepare/wait/cancel functions are always nested
correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It's not used or likely to be needed from other
files, so it can be static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch fixes the sparse warnings
"obsolete struct initializer, use C99 syntax" in vt6655/device_main.c
by converting the struct to C99 syntax
KernelVersion: linux-next-20110110
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the sparse warnings
"obsolete struct initializer, use C99 syntax" in icp_multi.c
by converting the struct to C99 syntax
KernelVersion: linux-next-20110110
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the sparse warnings in me4000.c:
me4000.c:122:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:123:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:124:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:125:1: warning: obsolete struct initializer, use C99 syntax
by converting the struct to use C99 syntax
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for in-tree driver we can use snd_card_create
for backports to older kernels this can be easily wrapped
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
remove \ from the code where C syntex doesnt require it
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
easycap_main.c:34:5: warning: symbol 'easycap_debug' was not declared. Should it be static?
easycap_main.c:36:5: warning: symbol 'easycap_gain' was not declared. Should it be static?
These two variables actually were declared in several places.
The variables are used in several files.
I've fixed "easycap_debug" so it gets declared in one place only and included properly.
For "easycap_gain" made it static and I created added a
->gain member to the easycap struct. This seems cleaner than using a
global variable and later on we may make this controlable via sysfs.
Cc:Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is necessary because some distributions are disabling OSS entirely.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The parameter easycap_debug appears in macros JOT and JOM and therefore
needs to be visible from all source files. The easycap_ prefix should
be sufficient to avoid namespace clashes outside the module.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The file added to linux-firmware is a copy of the current array which
does not have a recognisable header, so no validation is done.
Change the firmware version check to accept newer versions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch allows the possibility to choose between edgre triggering
and level trigerring, for the analog input, on the Measurement
Computing PCI-DAS* boards
Signed-off-by: Brice Dubost <braice@braice.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Delete use kernel strcmp() & strcpy() from TODO file
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Delete StringCmp() and StringCopy custom functions
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Use memcpy() instead custom StringCopy() and some style cleanups
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Use memcmp() instead custom StringCmp() and some style cleanups
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb_alloc_urb() can return NULL so check for that and return
-ENOMEM if it happens.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bitwise and logical or are the equivalent here, so this doesn't affect
runtime, but logical or was intended. The original code causes a
warning in Sparse: "warning: dubious: !x | !y"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It should decrement or we read past the array
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These changes enable the driver to work with SEP
version 3.4.5
Major change is to use non DMA access for any data
comming from a function that uses the external application
service on the SEP.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rts_pstor is used to support Realtek PCI-E card readers,
including rts5209, rts5208, Barossa.
Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call
dev_alloc_skb(), which may fail and return NULL, but we do not check the
returned value against NULL before dereferencing the returned pointer.
This may lead to a NULL pointer dereference which means we'll crash - not
good.
In a separate call to dev_alloc_skb(), the debug level is changed so that
the failure message will always be logged.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>