Commit graph

1,311,761 commits

Author SHA1 Message Date
Chuck Lever
e5c440c227 svcrdma: Address an integer overflow
[ Upstream commit 3c63d8946e ]

Dan Carpenter reports:
> Commit 78147ca8b4 ("svcrdma: Add a "parsed chunk list" data
> structure") from Jun 22, 2020 (linux-next), leads to the following
> Smatch static checker warning:
>
>	net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk()
>	warn: potential user controlled sizeof overflow 'segcount * 4 * 4'
>
> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
>     488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt)
>     489 {
>     490         u32 segcount;
>     491         __be32 *p;
>     492
>     493         if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount))
>                                                               ^^^^^^^^
>
>     494                 return false;
>     495
>     496         /* A bogus segcount causes this buffer overflow check to fail. */
>     497         p = xdr_inline_decode(&rctxt->rc_stream,
> --> 498                               segcount * rpcrdma_segment_maxsz * sizeof(*p));
>
>
> segcount is an untrusted u32.  On 32bit systems anything >= SIZE_MAX / 16 will
> have an integer overflow and some those values will be accepted by
> xdr_inline_decode().

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 78147ca8b4 ("svcrdma: Add a "parsed chunk list" data structure")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:24 +01:00
Antonio Quartulli
fe1b4c7164 m68k: coldfire/device.c: only build FEC when HW macros are defined
[ Upstream commit 63a24cf8cc ]

When CONFIG_FEC is set (due to COMPILE_TEST) along with
CONFIG_M54xx, coldfire/device.c has compile errors due to
missing MCFEC_* and MCF_IRQ_FEC_* symbols.

Make the whole FEC blocks dependent on having the HW macros
defined, rather than on CONFIG_FEC itself.

This fix is very similar to commit e6e1e7b19f ("m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined")

Fixes: b7ce7f0d0e ("m68knommu: merge common ColdFire FEC platform setup code")
To: Greg Ungerer <gerg@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:24 +01:00
Jean-Michel Hautbois
d883be45ab m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
[ Upstream commit f212140962 ]

Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO
register offset was incorrectly set to 8 instead of 0. This prevented
proper GPIO configuration for m5441x targets.

Fixes: bea8bcb12d ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:24 +01:00
Benjamin Peterson
660ea0db31 perf trace: avoid garbage when not printing a trace event's arguments
[ Upstream commit 5fb8e56542 ]

trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.

Fixes: f11b2803bb ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:24 +01:00
Chao Yu
bbe48e47b9 f2fs: fix to avoid forcing direct write to use buffered IO on inline_data inode
[ Upstream commit 26e6f59d0b ]

Jinsu Lee reported a performance regression issue, after commit
5c8764f867 ("f2fs: fix to force buffered IO on inline_data
inode"), we forced direct write to use buffered IO on inline_data
inode, it will cause performace regression due to memory copy
and data flush.

It's fine to not force direct write to use buffered IO, as it
can convert inline inode before committing direct write IO.

Fixes: 5c8764f867 ("f2fs: fix to force buffered IO on inline_data inode")
Reported-by: Jinsu Lee <jinsu1.lee@samsung.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/af03dd2c-e361-4f80-b2fd-39440766cf6e@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Chao Yu
a10cc033b2 f2fs: fix to map blocks correctly for direct write
[ Upstream commit 5dd00ebda3 ]

f2fs_map_blocks() supports to map continuous holes or preallocated
address, we should avoid setting F2FS_MAP_MAPPED for these cases
only, otherwise, it may fail f2fs_iomap_begin(), and make direct
write fallbacking to use buffered IO and flush, result in performance
regression.

Fixes: 9f0f6bf427 ("f2fs: support to map continuous holes or preallocated address")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409122103.e45aa13b-oliver.sang@intel.com
Cc: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Long Li
c631207897 f2fs: fix race in concurrent f2fs_stop_gc_thread
[ Upstream commit 7b0033dbc4 ]

In my test case, concurrent calls to f2fs shutdown report the following
stack trace:

 Oops: general protection fault, probably for non-canonical address 0xc6cfff63bb5513fc: 0000 [#1] PREEMPT SMP PTI
 CPU: 0 UID: 0 PID: 678 Comm: f2fs_rep_shutdo Not tainted 6.12.0-rc5-next-20241029-g6fb2fa9805c5-dirty #85
 Call Trace:
  <TASK>
  ? show_regs+0x8b/0xa0
  ? __die_body+0x26/0xa0
  ? die_addr+0x54/0x90
  ? exc_general_protection+0x24b/0x5c0
  ? asm_exc_general_protection+0x26/0x30
  ? kthread_stop+0x46/0x390
  f2fs_stop_gc_thread+0x6c/0x110
  f2fs_do_shutdown+0x309/0x3a0
  f2fs_ioc_shutdown+0x150/0x1c0
  __f2fs_ioctl+0xffd/0x2ac0
  f2fs_ioctl+0x76/0xe0
  vfs_ioctl+0x23/0x60
  __x64_sys_ioctl+0xce/0xf0
  x64_sys_call+0x2b1b/0x4540
  do_syscall_64+0xa7/0x240
  entry_SYSCALL_64_after_hwframe+0x76/0x7e

The root cause is a race condition in f2fs_stop_gc_thread() called from
different f2fs shutdown paths:

  [CPU0]                       [CPU1]
  ----------------------       -----------------------
  f2fs_stop_gc_thread          f2fs_stop_gc_thread
                                 gc_th = sbi->gc_thread
    gc_th = sbi->gc_thread
    kfree(gc_th)
    sbi->gc_thread = NULL
                                 < gc_th != NULL >
                                 kthread_stop(gc_th->f2fs_gc_task) //UAF

The commit c7f114d864 ("f2fs: fix to avoid use-after-free in
f2fs_stop_gc_thread()") attempted to fix this issue by using a read
semaphore to prevent races between shutdown and remount threads, but
it fails to prevent all race conditions.

Fix it by converting to write lock of s_umount in f2fs_do_shutdown().

Fixes: 7950e9ac63 ("f2fs: stop gc/discard thread after fs shutdown")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Yicong Yang
0f296a347a perf build: Add missing cflags when building with custom libtraceevent
[ Upstream commit d5a0a4ab4a ]

When building with custom libtraceevent, below errors occur:

  $ make -C tools/perf NO_LIBPYTHON=1 PKG_CONFIG_PATH=<custom libtraceevent>
  In file included from util/session.h:5,
                   from builtin-buildid-list.c:17:
  util/trace-event.h:153:10: fatal error: traceevent/event-parse.h: No such file or directory
    153 | #include <traceevent/event-parse.h>
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~
  <snip similar errors of missing headers>

This is because the include path is missed in the cflags. Add it.

Fixes: 0f0e1f4456 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241024133236.31016-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Siddharth Vadapalli
0c4612370c PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds
[ Upstream commit 22a9120479 ]

According to Section 2.2 of the PCI Express Card Electromechanical
Specification (Revision 5.1), in order to ensure that the power and the
reference clock are stable, PERST# has to be deasserted after a delay of
100 milliseconds (TPVPERL).

Currently, it is being assumed that the power is already stable, which
is not necessarily true.

Hence, change the delay to PCIE_T_PVPERL_MS to guarantee that power and
reference clock are stable.

Fixes: f3e25911a4 ("PCI: j721e: Add TI J721E PCIe driver")
Fixes: f96b697137 ("PCI: j721e: Use T_PERST_CLK_US macro")
Link: https://lore.kernel.org/r/20241104074420.1862932-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Manivannan Sadhasivam
72034050cc PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
[ Upstream commit 40e2125381 ]

Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.

All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.

One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.

Thus, fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.

Fixes: 473b2cf9c4 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715ee ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Manivannan Sadhasivam
516969d576 PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
[ Upstream commit 7d7cf89b11 ]

Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of qcom_pcie_perst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.

All of the Qcom endpoint SoCs supported as of now depend on the refclk from
the host for keeping the controller operational. Due to this limitation,
any access to the hardware registers in the absence of refclk will result
in a whole endpoint crash. Unfortunately, most of the controller cleanups
require accessing the hardware registers (like eDMA cleanup performed in
dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup
functions are currently causing the crash in the endpoint SoC once host
asserts PERST#.

One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host (as I was told by the Qcom engineers).

Thus, fix this crash by moving the controller cleanups to the start of
the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is
called whenever the host has deasserted PERST# and it is guaranteed that
the refclk would be active at this point. So at the start of this function
(after enabling resources), the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.

Fixes: 473b2cf9c4 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715ee ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-1-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:23 +01:00
Manivannan Sadhasivam
a16e6f7966 PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported
[ Upstream commit ba4a2e2317 ]

Currently, if 'Global IRQ' is supported by the platform, only the Link up
interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs
on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled
by default in the hardware, but commit 4581403f67 ("PCI: qcom: Enumerate
endpoints based on Link up event in 'global_irq' interrupt") disabled them
and enabled only the Link up interrupt. While MSI continued to work on the
SM8450 platform that was used to test the offending commit, on other
platforms like SM8250, X1E80100, MSIs are getting masked. And they require
enabling the MSI interrupt bits in the register to unmask (enable) the
MSIs.

Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are
described as 'diagnostic' interrupts in the internal documentation,
disabling them masks MSI on these platforms. Due to this, MSIs were not
reported to be received these platforms while supporting 'Global IRQ'.

So, enable the MSI interrupts along with the Link up interrupt in the
PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that
the MSIs continue to work and also the driver is able to catch the Link
up interrupt for enumerating endpoint devices.

Fixes: 4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@kernel.org/
Link: https://lore.kernel.org/r/20241007051255.4378-1-manivannan.sadhasivam@linaro.org
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SL7
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Zhiguo Niu
248f5a5b43 f2fs: fix to avoid use GC_AT when setting gc_mode as GC_URGENT_LOW or GC_URGENT_MID
[ Upstream commit 296b8cb34e ]

If gc_mode is set to GC_URGENT_LOW or GC_URGENT_MID, cost benefit GC
approach should be used, but if ATGC is enabled at the same time,
Age-threshold approach will be selected, which can only do amount of
GC and it is much less than the numbers of CB approach.

some traces:
  f2fs_gc-254:48-396     [007] ..... 2311600.684028: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1053, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0
  f2fs_gc-254:48-396     [007] ..... 2311600.684527: f2fs_get_victim: dev = (254,48), type = No TYPE, policy = (Background GC, LFS-mode, Age-threshold), victim = 10, cost = 4294364975, ofs_unit = 1, pre_victim_secno = -1, prefree = 0, free = 44898
  f2fs_gc-254:48-396     [007] ..... 2311600.714835: f2fs_gc_end: dev = (254,48), ret = 0, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0
  f2fs_gc-254:48-396     [007] ..... 2311600.714843: f2fs_background_gc: dev = (254,48), wait_ms = 50, prefree = 0, free = 44898
  f2fs_gc-254:48-396     [007] ..... 2311600.771785: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:
  f2fs_gc-254:48-396     [007] ..... 2311600.772275: f2fs_gc_end: dev = (254,48), ret = -61, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0

Fixes: 0e5e81114d ("f2fs: add GC_URGENT_LOW mode in gc_urgent")
Fixes: d98af5f455 ("f2fs: introduce gc_urgent_mid mode")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Chao Yu
801092a2c9 f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason()
[ Upstream commit f10a890308 ]

syzbot reports deadlock issue of f2fs as below:

======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc3-syzkaller-00087-gc964ced77262 #0 Not tainted
------------------------------------------------------
kswapd0/79 is trying to acquire lock:
ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2199 [inline]
ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068

but task is already holding lock:
ffff88804bd92610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (sb_internal#2){.+.+}-{0:0}:
       lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
       percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
       __sb_start_write include/linux/fs.h:1716 [inline]
       sb_start_intwrite+0x4d/0x1c0 include/linux/fs.h:1899
       f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842
       evict+0x4e8/0x9b0 fs/inode.c:725
       f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807
       evict+0x4e8/0x9b0 fs/inode.c:725
       dispose_list fs/inode.c:774 [inline]
       prune_icache_sb+0x239/0x2f0 fs/inode.c:963
       super_cache_scan+0x38c/0x4b0 fs/super.c:223
       do_shrink_slab+0x701/0x1160 mm/shrinker.c:435
       shrink_slab+0x1093/0x14d0 mm/shrinker.c:662
       shrink_one+0x43b/0x850 mm/vmscan.c:4818
       shrink_many mm/vmscan.c:4879 [inline]
       lru_gen_shrink_node mm/vmscan.c:4957 [inline]
       shrink_node+0x3799/0x3de0 mm/vmscan.c:5937
       kswapd_shrink_node mm/vmscan.c:6765 [inline]
       balance_pgdat mm/vmscan.c:6957 [inline]
       kswapd+0x1ca3/0x3700 mm/vmscan.c:7226
       kthread+0x2f0/0x390 kernel/kthread.c:389
       ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
       ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

-> #1 (fs_reclaim){+.+.}-{0:0}:
       lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
       __fs_reclaim_acquire mm/page_alloc.c:3834 [inline]
       fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3848
       might_alloc include/linux/sched/mm.h:318 [inline]
       prepare_alloc_pages+0x147/0x5b0 mm/page_alloc.c:4493
       __alloc_pages_noprof+0x16f/0x710 mm/page_alloc.c:4722
       alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
       alloc_pages_noprof mm/mempolicy.c:2345 [inline]
       folio_alloc_noprof+0x128/0x180 mm/mempolicy.c:2352
       filemap_alloc_folio_noprof+0xdf/0x500 mm/filemap.c:1010
       do_read_cache_folio+0x2eb/0x850 mm/filemap.c:3787
       read_mapping_folio include/linux/pagemap.h:1011 [inline]
       f2fs_commit_super+0x3c0/0x7d0 fs/f2fs/super.c:4032
       f2fs_record_stop_reason+0x13b/0x1d0 fs/f2fs/super.c:4079
       f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174
       f2fs_write_inode+0x35f/0x4d0 fs/f2fs/inode.c:785
       write_inode fs/fs-writeback.c:1503 [inline]
       __writeback_single_inode+0x711/0x10d0 fs/fs-writeback.c:1723
       writeback_single_inode+0x1f3/0x660 fs/fs-writeback.c:1779
       sync_inode_metadata+0xc4/0x120 fs/fs-writeback.c:2849
       f2fs_release_file+0xa8/0x100 fs/f2fs/file.c:1941
       __fput+0x23f/0x880 fs/file_table.c:431
       task_work_run+0x24f/0x310 kernel/task_work.c:228
       resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
       exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
       exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
       __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
       syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218
       do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
       entry_SYSCALL_64_after_hwframe+0x77/0x7f

-> #0 (&sbi->sb_lock){++++}-{3:3}:
       check_prev_add kernel/locking/lockdep.c:3161 [inline]
       check_prevs_add kernel/locking/lockdep.c:3280 [inline]
       validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
       __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
       lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
       down_write+0x99/0x220 kernel/locking/rwsem.c:1577
       f2fs_down_write fs/f2fs/f2fs.h:2199 [inline]
       f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068
       f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174
       f2fs_evict_inode+0xa61/0x15c0 fs/f2fs/inode.c:883
       evict+0x4e8/0x9b0 fs/inode.c:725
       f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807
       evict+0x4e8/0x9b0 fs/inode.c:725
       dispose_list fs/inode.c:774 [inline]
       prune_icache_sb+0x239/0x2f0 fs/inode.c:963
       super_cache_scan+0x38c/0x4b0 fs/super.c:223
       do_shrink_slab+0x701/0x1160 mm/shrinker.c:435
       shrink_slab+0x1093/0x14d0 mm/shrinker.c:662
       shrink_one+0x43b/0x850 mm/vmscan.c:4818
       shrink_many mm/vmscan.c:4879 [inline]
       lru_gen_shrink_node mm/vmscan.c:4957 [inline]
       shrink_node+0x3799/0x3de0 mm/vmscan.c:5937
       kswapd_shrink_node mm/vmscan.c:6765 [inline]
       balance_pgdat mm/vmscan.c:6957 [inline]
       kswapd+0x1ca3/0x3700 mm/vmscan.c:7226
       kthread+0x2f0/0x390 kernel/kthread.c:389
       ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
       ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

other info that might help us debug this:

Chain exists of:
  &sbi->sb_lock --> fs_reclaim --> sb_internal#2

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  rlock(sb_internal#2);
                               lock(fs_reclaim);
                               lock(sb_internal#2);
  lock(&sbi->sb_lock);

Root cause is there will be potential deadlock in between
below tasks:

Thread A				Kswapd
- f2fs_ioc_commit_atomic_write
 - mnt_want_write_file -- down_read lock A
					- balance_pgdat
					 - __fs_reclaim_acquire  -- lock B
					  - shrink_node
					   - prune_icache_sb
					    - dispose_list
					     - f2fs_evict_inode
					      - sb_start_intwrite  -- down_read lock A
 - f2fs_do_sync_file
  - f2fs_write_inode
   - f2fs_handle_critical_error
    - f2fs_record_stop_reason
     - f2fs_commit_super
      - read_mapping_folio
       - filemap_alloc_folio_noprof
        - fs_reclaim_acquire  -- lock B

Both threads try to acquire read lock of lock A, then its upcoming write
lock grabber will trigger deadlock.

Let's always create an asynchronous task in f2fs_handle_critical_error()
rather than calling f2fs_record_stop_reason() synchronously to avoid
this potential deadlock issue.

Fixes: b62e71be21 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Reported-by: syzbot+be4a9983e95a5e25c8d3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6704d667.050a0220.1e4d62.0081.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Zeng Heng
5e69964251 f2fs: Fix not used variable 'index'
[ Upstream commit 0c3a38a4b4 ]

Fix the following compilation warning:
fs/f2fs/data.c:2391:10: warning: variable ‘index’ set but not used
[-Wunused-but-set-variable]
 2391 |  pgoff_t index;

Only define and set the variable index when the CONFIG_F2FS_FS_COMPRESSION
is enabled.

Fixes: db92e6c729 ("f2fs: convert f2fs_mpage_readpages() to use folio")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Yongpeng Yang
abfd2c13ba f2fs: check curseg->inited before write_sum_page in change_curseg
[ Upstream commit 43563069e1 ]

In the __f2fs_init_atgc_curseg->get_atssr_segment calling,
curseg->segno is NULL_SEGNO, indicating that there is no summary
block that needs to be written.

Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
LongPing Wei
9b57a3f7e3 f2fs: fix the wrong f2fs_bug_on condition in f2fs_do_replace_block
[ Upstream commit c3af1f1347 ]

This f2fs_bug_on was introduced by commit 2c1905042c ("f2fs: check
segment type in __f2fs_replace_block") when there were only 6 curseg types.
After commit d0b9e42ab6 ("f2fs: introduce inmem curseg") was introduced,
the condition should be changed to checking curseg->seg_type.

Fixes: d0b9e42ab6 ("f2fs: introduce inmem curseg")
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Frank Li
c31c7b81c1 i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin
[ Upstream commit 36faa04ce3 ]

When a new device hotjoins, a new dynamic address is assigned.
i3c_master_add_i3c_dev_locked() identifies that the device was previously
attached to the bus and locates the olddev.

i3c_master_add_i3c_dev_locked()
{
    ...
    olddev = i3c_master_search_i3c_dev_duplicate(newdev);
    ...
    if (olddev) {
        ...
        i3c_dev_disable_ibi_locked(olddev);
        ^^^^^^
        The olddev should not receive any commands on the i3c bus as it
        does not exist and has been assigned a new address. This will
        result in NACK or timeout. So remove it.
    }

    i3c_dev_free_ibi_locked(olddev);
    ^^^^^^^^
    This function internally calls i3c_dev_disable_ibi_locked() function
    causing to send DISEC command with old Address.

    The olddev should not receive any commands on the i3c bus as it
    does not exist and has been assigned a new address. This will
    result in NACK or timeout. So, update the olddev->ibi->enabled
    flag to false to avoid DISEC with OldAddr.
}

Include part of Ravindra Yashvant Shinde's work:
https://lore.kernel.org/linux-i3c/20240820151917.3904956-1-ravindra.yashvant.shinde@nxp.com/T/#u

Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Co-developed-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com>
Signed-off-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241001162232.223724-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:22 +01:00
Arnaldo Carvalho de Melo
d4ce022455 perf ftrace latency: Fix unit on histogram first entry when using --use-nsec
[ Upstream commit 064d569e20 ]

The use_nsec arg wasn't being taken into account when printing the first
histogram entry, fix it:

  root@number:~# perf ftrace latency --use-nsec -T switch_mm_irqs_off -a sleep 2
  #   DURATION     |      COUNT | GRAPH                                          |
       0 - 1    us |          0 |                                                |
       1 - 2    ns |          0 |                                                |
       2 - 4    ns |          0 |                                                |
       4 - 8    ns |          0 |                                                |
       8 - 16   ns |          0 |                                                |
      16 - 32   ns |          0 |                                                |
      32 - 64   ns |        125 |                                                |
      64 - 128  ns |        335 |                                                |
     128 - 256  ns |       2155 | ####                                           |
     256 - 512  ns |       9996 | ###################                            |
     512 - 1024 ns |       4958 | #########                                      |
       1 - 2    us |       4636 | #########                                      |
       2 - 4    us |       1053 | ##                                             |
       4 - 8    us |         15 |                                                |
       8 - 16   us |          1 |                                                |
      16 - 32   us |          0 |                                                |
      32 - 64   us |          0 |                                                |
      64 - 128  us |          0 |                                                |
     128 - 256  us |          0 |                                                |
     256 - 512  us |          0 |                                                |
     512 - 1024 us |          0 |                                                |
       1 - ...  ms |          0 |                                                |
  root@number:~#

After:

  root@number:~# perf ftrace latency --use-nsec -T switch_mm_irqs_off -a sleep 2
  #   DURATION     |      COUNT | GRAPH                                          |
       0 - 1    ns |          0 |                                                |
       1 - 2    ns |          0 |                                                |
       2 - 4    ns |          0 |                                                |
       4 - 8    ns |          0 |                                                |
       8 - 16   ns |          0 |                                                |
      16 - 32   ns |          0 |                                                |
      32 - 64   ns |         19 |                                                |
      64 - 128  ns |         94 |                                                |
     128 - 256  ns |       2191 | ####                                           |
     256 - 512  ns |       9719 | ####################                           |
     512 - 1024 ns |       5330 | ###########                                    |
       1 - 2    us |       4104 | ########                                       |
       2 - 4    us |        807 | #                                              |
       4 - 8    us |          9 |                                                |
       8 - 16   us |          0 |                                                |
      16 - 32   us |          0 |                                                |
      32 - 64   us |          0 |                                                |
      64 - 128  us |          0 |                                                |
     128 - 256  us |          0 |                                                |
     256 - 512  us |          0 |                                                |
     512 - 1024 us |          0 |                                                |
       1 - ...  ms |          0 |                                                |
  root@number:~#

Fixes: 84005bb614 ("perf ftrace latency: Add -n/--use-nsec option")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/ZyE3frB-hMXHCnMO@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Hou Tao
2bc07714dc virtiofs: use pages instead of pointer for kernel direct IO
[ Upstream commit 41748675c0 ]

When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:

  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
  Modules linked in:
  CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:__alloc_pages+0x2bf/0x380
  ......
  Call Trace:
   <TASK>
   ? __warn+0x8e/0x150
   ? __alloc_pages+0x2bf/0x380
   __kmalloc_large_node+0x86/0x160
   __kmalloc+0x33c/0x480
   virtio_fs_enqueue_req+0x240/0x6d0
   virtio_fs_wake_pending_and_unlock+0x7f/0x190
   queue_request_and_unlock+0x55/0x60
   fuse_simple_request+0x152/0x2b0
   fuse_direct_io+0x5d2/0x8c0
   fuse_file_read_iter+0x121/0x160
   __kernel_read+0x151/0x2d0
   kernel_read+0x45/0x50
   kernel_read_file+0x1a9/0x2a0
   init_module_from_file+0x6a/0xe0
   idempotent_init_module+0x175/0x230
   __x64_sys_finit_module+0x5d/0xb0
   x64_sys_call+0x1c3/0x9e0
   do_syscall_64+0x3d/0xc0
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   ......
   </TASK>
  ---[ end trace 0000000000000000 ]---

The warning is triggered as follows:

1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.

2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().

3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().

4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():

	if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
		return NULL;

5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.

A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.

So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.

After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.

It may seem necessary to introduce another field in fuse_conn to
indicate that these KVEC_IO pages are used for DMA, However, considering
that virtio-fs is currently the only user of use_pages_for_kvec_io, just
reuse use_pages_for_kvec_io to indicate that these pages will be used
for DMA.

Fixes: a62a8ef9d9 ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Li Huafei
4ad9592cc7 perf disasm: Fix not cleaning up disasm_line in symbol__disassemble_raw()
[ Upstream commit 150dab31d5 ]

In symbol__disassemble_raw(), the created disasm_line should be
discarded before returning an error. When creating disasm_line fails,
break the loop and then release the created lines.

Fixes: 0b971e6bf1 ("perf annotate: Add support to capture and parse raw instruction in powerpc using dso__data_read_offset utility")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: sesse@google.com
Cc: kjain@linux.ibm.com
Link: https://lore.kernel.org/r/20241019154157.282038-3-lihuafei1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Li Huafei
ae20be3a5e perf disasm: Use disasm_line__free() to properly free disasm_line
[ Upstream commit b4e0e9a1e3 ]

The structure disasm_line contains members that require dynamically
allocated memory and need to be freed correctly using
disasm_line__free().

This patch fixes the incorrect release in
symbol__disassemble_capstone().

Fixes: 6d17edc113 ("perf annotate: Use libcapstone to disassemble")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: sesse@google.com
Cc: kjain@linux.ibm.com
Link: https://lore.kernel.org/r/20241019154157.282038-1-lihuafei1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Francesco Zardi
5f525ae90f rust: block: fix formatting of kernel::block::mq::request module
[ Upstream commit 28e848386b ]

Fix several issues with rustdoc formatting for the
`kernel::block::mq::Request` module, in particular:

  - An ordered list not rendering correctly, fixed by using numbers
    prefixes instead of letters.

  - Code snippets formatted as regular text, fixed by wrapping the
    code with `back-ticks`.

  - References to types missing intra-doc links, fixed by wrapping the
    types with [square brackets].

Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1108
Signed-off-by: Francesco Zardi <frazar00@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Link: https://lore.kernel.org/r/20240903173027.16732-3-frazar00@gmail.com
[ Added an extra intra-doc link. Took the chance to add some periods
  for consistency. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Ilpo Järvinen
2249f3d829 PCI: cpqphp: Fix PCIBIOS_* return value confusion
[ Upstream commit e2226dbc4a ]

Code in and related to PCI_RefinedAccessConfig() has three types of return
type confusion:

 - PCI_RefinedAccessConfig() tests pci_bus_read_config_dword() return value
   against -1.

 - PCI_RefinedAccessConfig() returns both -1 and PCIBIOS_* return codes.

 - Callers of PCI_RefinedAccessConfig() only test for -1.

Make PCI_RefinedAccessConfig() return PCIBIOS_* codes consistently and
adapt callers accordingly.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20241022091140.3504-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Paolo Bonzini
96ef0372fc rust: macros: fix documentation of the paste! macro
[ Upstream commit 15541c9263 ]

One of the example in this section uses a curious mix of the constant
and function declaration syntaxes; fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 823d4737d4 ("rust: macros: add `paste!` proc macro")
Link: https://lore.kernel.org/r/20241019072208.1016707-1-pbonzini@redhat.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:21 +01:00
Yutaro Ohno
b26e36b3e2 rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
[ Upstream commit 8b55dc8610 ]

The doc comment for `ThisModule` incorrectly states the C header file
for `THIS_MODULE` as `include/linux/export.h`, while the correct path is
`include/linux/init.h`. This is because `THIS_MODULE` was moved in
commit 5b20755b77 ("init: move THIS_MODULE from <linux/export.h> to
<linux/init.h>").

Update the doc comment for `ThisModule` to reflect the correct header
file path for `THIS_MODULE`.

Fixes: 5b20755b77 ("init: move THIS_MODULE from <linux/export.h> to <linux/init.h>")
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ZxXDZwxWgoEiIYkj@ohnotp
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Leo Yan
8fbfda1551 perf probe: Correct demangled symbols in C++ program
[ Upstream commit 314909f13c ]

An issue can be observed when probe C++ demangled symbol with steps:

  # nm test_cpp_mangle | grep print_data
    0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
    0000000000000afc T _Z10print_datai
    0000000000000b38 T _Z10print_dataR5Point

  # perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
    ...
    print_data(Point&)
    print_data(int)
    ...

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
    ...

When tried to probe symbol "print_data(int)", the log shows:

    Symbol print_data(int) address found : afc

The found address is 0xafc - which is right with verifying the output
result from nm. Afterwards when write event, the command uses offset
0xb38 in the last log, which is a wrong address.

The dwarf_diename() gets a common function name, in above case, it
returns string "print_data". As a result, the tool parses the offset
based on the common name. This leads to probe at the wrong symbol
"print_data(Point&)".

To fix the issue, use the die_get_linkage_name() function to retrieve
the distinct linkage name - this is the mangled name for the C++ case.
Based on this unique name, the tool can get a correct offset for
probing. Based on DWARF doc, it is possible the linkage name is missed
in the DIE, it rolls back to use dwarf_diename().

After:

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2d06]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
    Added new event:
      probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)

    You can now use it in all perf tools, such as:

            perf record -e probe_test_cpp_mangle:test -aR sleep 1

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
    probe-definition(0): test2=print_data(Point&)
    symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(Point&) address found : b38
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
    Group:probe_test_cpp_mangle Event:test probe:p
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
    Added new event:
      probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)

    You can now use it in all perf tools, such as:

            perf record -e probe_test_cpp_mangle:test2 -aR sleep 1

Fixes: fb1587d869 ("perf probe: List probes with line number and file name")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012141432.877894-1-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Ian Rogers
aa2e3dcf7c perf probe: Fix libdw memory leak
[ Upstream commit 4585038b8e ]

Add missing dwarf_cfi_end to free memory associated with probe_finder
cfi_eh which is allocated and owned via a call to
dwarf_getcfi_elf. Confusingly cfi_dbg shouldn't be freed as its memory
is owned by the passed in debuginfo struct. Add comments to highlight
this.

This addresses leak sanitizer issues seen in:
tools/perf/tests/shell/test_uprobe_from_different_cu.sh

Fixes: 270bde1e76 ("perf probe: Search both .eh_frame and .debug_frame sections for probe location")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241016235622.52166-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Ian Rogers
51dfd5c181 perf disasm: Fix capstone memory leak
[ Upstream commit 1280f012e0 ]

The insn argument passed to cs_disasm needs freeing. To support
accurately having count, add an additional free_count variable.

Fixes: c5d60de181 ("perf annotate: Add support to use libcapstone in powerpc")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241016235622.52166-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Veronika Molnarova
aca794f729 perf dso: Fix symtab_type for kmod compression
[ Upstream commit 05a62936e6 ]

During the rework of the dso structure in patch ee756ef749 an
increment was forgotten for the symtab_type in case the data for
the kernel module are compressed. This affects the probing of the
kernel modules, which fails if the data are not already cached.

Increment the value of the symtab_type to its compressed variant so the
data could be recovered successfully.

Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20241010144836.16424-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Chao Yu
e812871c06 f2fs: fix to account dirty data in __get_secs_required()
[ Upstream commit 1acd73edbb ]

It will trigger system panic w/ testcase in [1]:

------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2752!
RIP: 0010:new_curseg+0xc81/0x2110
Call Trace:
 f2fs_allocate_data_block+0x1c91/0x4540
 do_write_page+0x163/0xdf0
 f2fs_outplace_write_data+0x1aa/0x340
 f2fs_do_write_data_page+0x797/0x2280
 f2fs_write_single_data_page+0x16cd/0x2190
 f2fs_write_cache_pages+0x994/0x1c80
 f2fs_write_data_pages+0x9cc/0xea0
 do_writepages+0x194/0x7a0
 filemap_fdatawrite_wbc+0x12b/0x1a0
 __filemap_fdatawrite_range+0xbb/0xf0
 file_write_and_wait_range+0xa1/0x110
 f2fs_do_sync_file+0x26f/0x1c50
 f2fs_sync_file+0x12b/0x1d0
 vfs_fsync_range+0xfa/0x230
 do_fsync+0x3d/0x80
 __x64_sys_fsync+0x37/0x50
 x64_sys_call+0x1e88/0x20d0
 do_syscall_64+0x4b/0x110
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

The root cause is if checkpoint_disabling and lfs_mode are both on,
it will trigger OPU for all overwritten data, it may cost more free
segment than expected, so f2fs must account those data correctly to
calculate cosumed free segments later, and return ENOSPC earlier to
avoid run out of free segment during block allocation.

[1] https://lore.kernel.org/fstests/20241015025106.3203676-1-chao@kernel.org/

Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Arnd Bergmann
3afa395889 mailbox, remoteproc: k3-m4+: fix compile testing
[ Upstream commit 9c12b96ee2 ]

The k3-m4 remoteproc driver was merged with incorrect dependencies.
Despite multiple people trying to fix this, the version 6.12-rc2
remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
when the driver is built-in.

arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'

Fix the dependency again to make it work in all configurations.
The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
dependencies. The link failure can be avoided with a simple 'depends
do, so turn that into the same 'depends' to ensure we get no circular
on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
we use elsehwere. On the other hand, building for OMAP2PLUS makes
no sense since the hardware only exists on K3.

Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Fixes: ba0c0cb56f ("remoteproc: k3-m4: use the proper dependencies")
Fixes: 54595f2807 ("mailbox, remoteproc: omap2+: fix compile testing")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241007132441.2732215-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:20 +01:00
Ye Bin
9e11b1d5fd f2fs: fix null-ptr-deref in f2fs_submit_page_bio()
[ Upstream commit b7d0a97b28 ]

There's issue as follows when concurrently installing the f2fs.ko
module and mounting the f2fs file system:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__bio_alloc+0x2fb/0x6c0 [f2fs]
Call Trace:
 <TASK>
 f2fs_submit_page_bio+0x126/0x8b0 [f2fs]
 __get_meta_page+0x1d4/0x920 [f2fs]
 get_checkpoint_version.constprop.0+0x2b/0x3c0 [f2fs]
 validate_checkpoint+0xac/0x290 [f2fs]
 f2fs_get_valid_checkpoint+0x207/0x950 [f2fs]
 f2fs_fill_super+0x1007/0x39b0 [f2fs]
 mount_bdev+0x183/0x250
 legacy_get_tree+0xf4/0x1e0
 vfs_get_tree+0x88/0x340
 do_new_mount+0x283/0x5e0
 path_mount+0x2b2/0x15b0
 __x64_sys_mount+0x1fe/0x270
 do_syscall_64+0x5f/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Above issue happens as the biset of the f2fs file system is not
initialized before register "f2fs_fs_type".
To address above issue just register "f2fs_fs_type" at the last in
init_f2fs_fs(). Ensure that all f2fs file system resources are
initialized.

Fixes: f543805fcd ("f2fs: introduce private bioset")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Qi Han
a26ace3c6e f2fs: compress: fix inconsistent update of i_blocks in release_compress_blocks and reserve_compress_blocks
[ Upstream commit 26413ce18e ]

After release a file and subsequently reserve it, the FSCK flag is set
when the file is deleted, as shown in the following backtrace:

F2FS-fs (dm-48): Inconsistent i_blocks, ino:401231, iblocks:1448, sectors:1472
fs_rec_info_write_type+0x58/0x274
f2fs_rec_info_write+0x1c/0x2c
set_sbi_flag+0x74/0x98
dec_valid_block_count+0x150/0x190
f2fs_truncate_data_blocks_range+0x2d4/0x3cc
f2fs_do_truncate_blocks+0x2fc/0x5f0
f2fs_truncate_blocks+0x68/0x100
f2fs_truncate+0x80/0x128
f2fs_evict_inode+0x1a4/0x794
evict+0xd4/0x280
iput+0x238/0x284
do_unlinkat+0x1ac/0x298
__arm64_sys_unlinkat+0x48/0x68
invoke_syscall+0x58/0x11c

For clusters of the following type, i_blocks are decremented by 1 and
i_compr_blocks are incremented by 7 in release_compress_blocks, while
updates to i_blocks and i_compr_blocks are skipped in reserve_compress_blocks.

raw node:
D D D D D D D D
after compress:
C D D D D D D D
after reserve:
C D D D D D D D

Let's update i_blocks and i_compr_blocks properly in reserve_compress_blocks.

Fixes: eb8fbaa533 ("f2fs: compress: fix to check unreleased compressed cluster")
Signed-off-by: Qi Han <hanqi@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Miguel Ojeda
ccd14e0f6d rust: rbtree: fix SAFETY comments that should be # Safety sections
[ Upstream commit 8333ff4d07 ]

The tag `SAFETY` is used for safety comments, i.e. `// SAFETY`, while a
`Safety` section is used for safety preconditions in code documentation,
i.e. `/// # Safety`.

Fix the three instances recently added in `rbtree` that Clippy would
have normally caught in a public item, so that we can enable checking
of private items in one of the following commits.

Fixes: 98c14e40e0 ("rust: rbtree: add cursor")
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-14-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Veronika Molnarova
4683233e97 perf test attr: Add back missing topdown events
[ Upstream commit 6bff76af96 ]

With the patch 0b6c5371c0 "Add missing topdown metrics events" eight
topdown metric events with numbers ranging from 0x8000 to 0x8700 were
added to the test since they were added as 'perf stat' default events.
Later the patch 951efb9976 "Update no event/metric expectations" kept
only 4 of those events(0x8000-0x8300).

Currently, the topdown events with numbers 0x8400 to 0x8700 are missing
from the list of expected events resulting in a failure. Add back the
missing topdown events.

Fixes: 951efb9976 ("perf test attr: Update no event/metric expectations")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: mpetlan@redhat.com
Link: https://lore.kernel.org/r/20240311081611.7835-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Michael Petlan
936d5663a5 perf trace: Keep exited threads for summary
[ Upstream commit d29d92df41 ]

Since 9ffa6c7512 ("perf machine thread: Remove exited threads by
default") perf cleans exited threads up, but as said, sometimes they
are necessary to be kept. The mentioned commit does not cover all the
cases, we also need the information to construct the summary table in
perf-trace.

Before:
    # perf trace -s true

     Summary of events:

After:
    # perf trace -s -- true

     Summary of events:

     true (383382), 64 events, 91.4%

       syscall            calls  errors  total       min       avg       max       stddev
                                         (msec)    (msec)    (msec)    (msec)        (%)
       --------------- --------  ------ -------- --------- --------- ---------     ------
       mmap                   8      0     0.150     0.013     0.019     0.031     11.90%
       mprotect               3      0     0.045     0.014     0.015     0.017      6.47%
       openat                 2      0     0.014     0.006     0.007     0.007      9.73%
       munmap                 1      0     0.009     0.009     0.009     0.009      0.00%
       access                 1      1     0.009     0.009     0.009     0.009      0.00%
       pread64                4      0     0.006     0.001     0.001     0.002      4.53%
       fstat                  2      0     0.005     0.001     0.002     0.003     37.59%
       arch_prctl             2      1     0.003     0.001     0.002     0.002     25.91%
       read                   1      0     0.003     0.003     0.003     0.003      0.00%
       close                  2      0     0.003     0.001     0.001     0.001      3.86%
       brk                    1      0     0.002     0.002     0.002     0.002      0.00%
       rseq                   1      0     0.001     0.001     0.001     0.001      0.00%
       prlimit64              1      0     0.001     0.001     0.001     0.001      0.00%
       set_robust_list        1      0     0.001     0.001     0.001     0.001      0.00%
       set_tid_address        1      0     0.001     0.001     0.001     0.001      0.00%
       execve                 1      0     0.000     0.000     0.000     0.000      0.00%

[namhyung: simplified the condition]

Fixes: 9ffa6c7512 ("perf machine thread: Remove exited threads by default")
Reported-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20240927151926.399474-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Ian Rogers
17f36fc1bd perf stat: Fix affinity memory leaks on error path
[ Upstream commit 7f6ccb70e4 ]

Missed cleanup when an error occurs.

Fixes: 49de179577 ("perf stat: No need to setup affinities when starting a workload")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:19 +01:00
Levi Yun
39c38ff97c perf stat: Close cork_fd when create_perf_stat_counter() failed
[ Upstream commit e880a70f80 ]

When create_perf_stat_counter() failed, it doesn't close workload.cork_fd
open in evlist__prepare_workload(). This could make too many open file
error while __run_perf_stat() repeats.

Introduce evlist__cancel_workload to close workload.cork_fd and
wait workload.child_pid until exit to clear child process
when create_perf_stat_counter() is failed.

Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: nd@arm.com
Cc: howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240925132022.2650180-2-yeoreum.yun@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: 7f6ccb70e4 ("perf stat: Fix affinity memory leaks on error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Kan Liang
9042456a80 perf jevents: Don't stop at the first matched pmu when searching a events table
[ Upstream commit 8d7f85e323 ]

The "perf all PMU test" fails on a Coffee Lake machine.

The failure is caused by the below change in the commit e2641db83f
("perf vendor events: Add/update skylake events/metrics").

+    {
+        "BriefDescription": "This 48-bit fixed counter counts the UCLK cycles",
+        "Counter": "FIXED",
+        "EventCode": "0xff",
+        "EventName": "UNC_CLOCK.SOCKET",
+        "PerPkg": "1",
+        "PublicDescription": "This 48-bit fixed counter counts the UCLK cycles.",
+        "Unit": "cbox_0"
     }

The other cbox events have the unit name "CBOX", while the fixed counter
has a unit name "cbox_0". So the events_table will maintain separate
entries for cbox and cbox_0.

The perf_pmus__print_pmu_events() calculates the total number of events,
allocate an aliases buffer, store all the events into the buffer, sort,
and print all the aliases one by one.

The problem is that the calculated total number of events doesn't match
the stored events in the aliases buffer.

The perf_pmu__num_events() is used to calculate the number of events. It
invokes the pmu_events_table__num_events() to go through the entire
events_table to find all events. Because of the
pmu_uncore_alias_match(), the suffix of uncore PMU will be ignored. So
the events for cbox and cbox_0 are all counted.

When storing events into the aliases buffer, the
perf_pmu__for_each_event() only process the events for cbox.

Since a bigger buffer was allocated, the last entry are all 0.
When printing all the aliases, null will be outputted, and trigger the
failure.

The mismatch was introduced from the commit e3edd6cf63 ("perf
pmu-events: Reduce processed events by passing PMU"). The
pmu_events_table__for_each_event() stops immediately once a pmu is set.
But for uncore, especially this case, the method is wrong and mismatch
what perf does in the perf_pmu__num_events().

With the patch,
$ perf list pmu | grep -A 1 clock.socket
   unc_clock.socket
        [This 48-bit fixed counter counts the UCLK cycles. Unit: uncore_cbox_0
$ perf test "perf all PMU test"
  107: perf all PMU test                                               : Ok

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/all/202407101021.2c8baddb-oliver.sang@intel.com/
Fixes: e3edd6cf63 ("perf pmu-events: Reduce processed events by passing PMU")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241001021431.814811-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Todd Kjos
fe6fae61f3 PCI: Fix reset_method_store() memory leak
[ Upstream commit 2985b1844f ]

In reset_method_store(), a string is allocated via kstrndup() and assigned
to the local "options". options is then used in with strsep() to find
spaces:

  while ((name = strsep(&options, " ")) != NULL) {

If there are no remaining spaces, then options is set to NULL by strsep(),
so the subsequent kfree(options) doesn't free the memory allocated via
kstrndup().

Fix by using a separate tmp_options to iterate with strsep() so options is
preserved.

Link: https://lore.kernel.org/r/20241001231147.3583649-1-tkjos@google.com
Fixes: d88f521da3 ("PCI: Allow userspace to query and set device reset mechanism")
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Fei Shao
18259d272b dt-bindings: PCI: mediatek-gen3: Allow exact number of clocks only
[ Upstream commit 5efa23224b ]

In MediaTek PCIe gen3 bindings, "clocks" accepts a range of 1-6 clocks
across all SoCs. But in practice, each SoC requires a particular number of
clocks as defined in "clock-names", and the length of "clocks" and
"clock-names" can be inconsistent with current bindings.

For example:

  - MT8188, MT8192 and MT8195 all require 6 clocks, while the bindings
    accept 4-6 clocks.

  - MT7986 requires 4 clocks, while the bindings accept 4-6 clocks.

Update minItems and maxItems properties for individual SoCs as needed to
only accept the correct number of clocks.

Fixes: c6abd0eade ("dt-bindings: PCI: mediatek-gen3: Add support for Airoha EN7581")
Link: https://lore.kernel.org/r/20240925110044.3678055-3-fshao@chromium.org
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Thomas Falcon
554b47a920 perf mem: Fix printing PERF_MEM_LVLNUM_{L2_MHB|MSC}
[ Upstream commit 4f23fc34cc ]

With commit 8ec9497d3e ("tools/include: Sync uapi/linux/perf.h
with the kernel sources"), 'perf mem report' gives an incorrect memory
access string.
...
0.02%	1	3644	L5 hit	[.] 0x0000000000009b0e	mlc	[.] 0x00007fce43f59480
...

This occurs because, if no entry exists in mem_lvlnum, perf_mem__lvl_scnprintf
will default to 'L%d, lvl', which in this case for PERF_MEM_LVLNUM_L2_MHB is 0x05.
Add entries for PERF_MEM_LVLNUM_L2_MHB and PERF_MEM_LVLNUM_MSC to mem_lvlnum,
so that the correct strings are printed.
...
0.02%	1	3644	L2 MHB hit	[.] 0x0000000000009b0e	mlc	[.] 0x00007fce43f59480
...

Fixes: 8ec9497d3e ("tools/include: Sync uapi/linux/perf.h with the kernel sources")
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20240926144040.77897-1-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Andreas Gruenbacher
6752b6cc10 gfs2: Fix unlinked inode cleanup
[ Upstream commit 7c6f714d88 ]

Before commit f0e56edc2e ("gfs2: Split the two kinds of glock "delete"
work"), function delete_work_func() was used to trigger the eviction of
in-memory inodes from remote as well as deleting unlinked inodes at a
later point.  These two kinds of work were then split into two kinds of
work, and the two places in the code were deferred deletion of inodes is
required accidentally ended up queuing the wrong kind of work.  This
caused unlinked inodes to be left behind, which could in the worst case
fill up filesystems and require a filesystem check to recover.

Fix that by queuing the right kind of work in try_rgrp_unlink() and
gfs2_drop_inode().

Fixes: f0e56edc2e ("gfs2: Split the two kinds of glock "delete" work")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Andreas Gruenbacher
2a10074b46 gfs2: Allow immediate GLF_VERIFY_DELETE work
[ Upstream commit 160bc9555d ]

Add an argument to gfs2_queue_verify_delete() that allows it to queue
GLF_VERIFY_DELETE work for immediate execution.  This is used in the
next patch.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 7c6f714d88 ("gfs2: Fix unlinked inode cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:18 +01:00
Andreas Gruenbacher
85b6cc14de gfs2: Rename GLF_VERIFY_EVICT to GLF_VERIFY_DELETE
[ Upstream commit 820ce8ed53 ]

Rename the GLF_VERIFY_EVICT flag to GLF_VERIFY_DELETE: that flag
indicates that we want to delete an inode / verify that it has been
deleted.

To match, rename gfs2_queue_verify_evict() to
gfs2_queue_verify_delete().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 7c6f714d88 ("gfs2: Fix unlinked inode cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:17 +01:00
James Clark
c16d9f1fc8 perf cs-etm: Don't flush when packet_queue fills up
[ Upstream commit 5afd032961 ]

cs_etm__flush(), like cs_etm__sample() is an operation that generates a
sample and then swaps the current with the previous packet. Calling
flush after processing the queues results in two swaps which corrupts
the next sample. Therefore it wasn't appropriate to call flush here so
remove it.

Flushing is still done on a discontinuity to explicitly clear the last
branch buffer, but when the packet_queue fills up before reaching a
timestamp, that's not a discontinuity and the call to
cs_etm__process_traceid_queue() already generated samples and drained
the buffers correctly.

This is visible by looking for a branch that has the same target as the
previous branch and the following source is before the address of the
last target, which is impossible as execution would have had to have
gone backwards:

  ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
   (packet_queue fills here before a timestamp, resulting in a flush and
    branch target ffff80008011cadc is duplicated.)
  ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff80008011cadc update_sg_lb_stats+0x94
  ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34

After removing the flush the correct branch target is used for the
second sample, and ffff8000801117c4 is no longer before the previous
address:

  ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
  ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff8000801117a0 cpu_util+0x0
  ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34

Make sure that a final branch stack is output at the end of the trace
by calling cs_etm__end_block(). This is already done for both the
timeless decode paths.

Fixes: 21fe8dc119 ("perf cs-etm: Add support for CPU-wide trace scenarios")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Closes: https://lore.kernel.org/all/20240719092619.274730-1-gankulkarni@os.amperecomputing.com/
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:17 +01:00
David Laight
964b522a25 x86: fix off-by-one in access_ok()
[ Upstream commit 573f45a9f9 ]

When the size isn't a small constant, __access_ok() will call
valid_user_address() with the address after the last byte of the user
buffer.

It is valid for a buffer to end with the last valid user address so
valid_user_address() must allow accesses to the base of the guard page.

[ This introduces an off-by-one in the other direction for the plain
  non-sized accesses, but since we have that guard region that is a
  whole page, those checks "allowing" accesses to that guard region
  don't really matter. The access will fault anyway, whether to the
  guard page or if the address has been masked to all ones - Linus ]

Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:17 +01:00
Dan Carpenter
f32869876e mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb()
[ Upstream commit 192a16a343 ]

Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.

It doesn't affect things in practice because the data comes from the
device tree.  The "protocol" and "windows" variables are going to be
zero.  That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.

Still it's worth fixing this for future use cases.

Fixes: 5a6338cce9 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:17 +01:00
Yang Yingliang
a9c7cb960f mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
[ Upstream commit 271ee263cc ]

It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc().

Fixes: aa1609f571 ("mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05 14:02:17 +01:00